Can anybody tell me how this effect was done

Can anybody tell me how this effect was done (the text effect)? I found this fitness video on Vimeo.
two slightly different effects
http://vimeo.com/17166047
http://vimeo.com/17147109
Thanks alot
[email protected]

Looks like the Basic 3D effect with some Motion.

Similar Messages

Can anyone tell me how this photo was done

Hi all, I am really hoping that someone here will be able to help me find out what methods were used in photoshop to achieve this transformation between the original image of the figurine on the left and the image on the right. I have trawled the net and tutorials to find help but have not come up with anything. The main thing I want to do is to colour the image the same way as the one on the right. I am ok with placing the image in the background, etc but how do you think the multi-coloured effect on the girl was done? I have tried paint daub, accented edges, filters, vibrance, levels and saturation etc. just about everything I know but the green in the hair and the pink effects around the edges, the multi-coloured effect on the mushroom that she's sitting on and the gloss and highlights on the face has me confused. Its the actual figure and the colour treatments that have been applied to it that I want to know about. I am guessing that the background is a blur filter with gradient, if this is wrong please let me know.
I am using CS5 and would be absolutely grateful if anyone here can help me - even just a little bit
And I'm not worried about the alignment of the figure, ie facing front in the first image and sideways on the next one - only interested in how the colour effects were done.
Thanks ever so much if anyone can help.

actually, it looks like a color management issue and beginning to me
first, the plain one looks like untagged Adobe RGB (desaturated in web browser)
if you want the true color in photoshop
edit> assign profile: adobe RGB
if you want to jack the saturation up closer to your goal (to begin)
photoshop> edit> assign profile: prophoto RGB
then
photoshop> edit Convert to sRGB
then
try photoshop's Selective Color (to go to work on the correcting the blues)...
the highlights look like some kind of
photoshop> filter> artistic: plastic wrap
may have been applied (and painted back in)

Can anyone tell me how this effect was created?

At about 12 seconds into this clip there is the camera center frame brackets which take a snapshot and adds the clip to a timeline below the video. Its all animated and very cool.
http://gopro.com/videos/video-of-the-day/2013/7/30/

Use Time Remapping to freeze the frame on its own layer, then scale it back to 0% over the original footage. You can create the fake framing brackets pretty easily in AE, and just parent them to the footage.

Can anyone tell me how this effect was created? (extruded arcs)

Hi, I'm a novice at Illustrator (CS6) and was wondering if anyone could point me in the right direction to create extruded arcs. The effect I'm looking for is here:
http://stockfresh.com/image/426684/transparency-staircase-step-column-chart
I'm not quite sure where to start, so any hints or help greatly appreciated.

Use the perspective grid to construct it:
http://www.vektorgarten.de/img/tut/stairs-making-of.gif
You need an additional circle for the bottom.

Can anybody tell me how this was made ?

https://vimeo.com/32351411

The overlay on top of the face morph probably used Turbulent Displace (or similar effect with phase/evolution settings) with a blended tessellation texture. They may very well have used a pre-rendered texture animation though, because there is a recurring bad stitch/loop point that happens slightly less frequently as the speed of the phase slows. But achieving the same effect with Turbulent Displace would be simple, with a texture overlaid using a screen or similar blending mode.

Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?

Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.

Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?

HT1933 I downloaded WE CHAT app. which i store shows free. But still th. Can anybody tell me how to report this?ey charged 1 $ from my account

I downloaded WE CHAT app. which i store shows free. But still they charged 1 $. Can anybody tell me how to report this?

iTunes Store & Mac App Store: About payment card authorization ...

When U2 launched their latest album it was downloaded to all iTunes users free of charge. It does not seem to be possible to delete any or all of these tracks. Can anybody tell me how to delete these tracks?

When U2 launched their latest album it was downloaded to all iTunes users free of charge. It does not seem to be possible to delete any or all of these tracks. Can anybody tell me how to delete these tracks?

Hi SJHocking,
Welcome to the Apple Support Communities!
If you would like to remove the iTunes gift album “Songs of Innocence”, please follow the instructions outlined in the attached article.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support
Cheers,
Joe

Can anybody tell me how many text elements are there in sap scripts?

hi all,
can anybody tell me how many text elements are there in sap scripts?

Hi,
Do you mean that you want to know how many Text-elements are there in a specific Script or you want to know how many max Text-Elements a script can have?
I believe there is no limit on this......
To know all the Text Elements in a Script......goto SE71....press F4 Help on Script Name....Choose Last option for Custom developed Scripts.....and you can open the complete Script details & Code in a Line Editor...After that you can serach/look for the text elements

Help!!! Can Anybody tell me how to read bookmarks of MS word using ABAP?

It took me around 3 days , but there is still no solutions...
Can Anybody tell me how to read bookmarks of MS word using ABAP ?
Many thanks.

Dear Nick ,
Thanks for your attention!
I have MS word installed in the R3 server , and I uploaded my word doc with some self-defined bookmarks into SAP R3 system.
Now I want to read these bookmarks using ABAP in this R3 system...
Is it clear enough?
Looking forward to your solution ...
Thanks again..
Best Regards,
Leon.

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

As Roger said, iCloud does not support external POP accounts.
However, you can configure your Max to directly receive your Yahoo! email by following these instructions:
http://hints.macworld.com/article.php?story=20110208153256491
Note that this works (for me) without a Yahoo Plus! account - and make sure that you scroll down to the comment at the end of the article which has all of the correct settings in one place.
Cheers,
Rodney

HT1689 MY IPHONE 4 STOPPED SAVING ALL MY CALLS (IN,OUT&MISSED)TO MY CALL LOG ITS ALMOST BEEN A WHOLE MNTH I HAV TRIED EVERYTHING IT SEEMS IV DID ALL THE RESETS YOU CAN DO. DO I JUST NEED TO TAKE IT UP TO APPLE STORE OR CAN ANYBODY TELL ME HOW TO FIX MY P

ITS ALMOST BEEN A WHOLE MNTH I HAV TRIED EVERYTHING I DID ALL THE RESETS AND RESTORE YOU CAN DO. CAN ANYBODY TELL ME HOW TO FIX MY PROBLEM OR HAVE ANY OTHER SUGGESTION I WOULD BE ABLE TO DO ON MY PHONE OR HAVE I PRETTY MUCH TRIED EVERYTHING THAT I CAN DO AND NOW NEED TO TAKE IT UP TO AN APPLE REP AT THE APPLE STORE?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

I want to add some fields in the report of FBL5N, Can anybody tell me how ?

I want to add some fields in the report of FBL5N, Can anybody tell me how to do it?
The fields are sales order, delivery, order quantity, net value and others.
I can only find the shipment number in FI document.
Thank you very much.

Dear Jie,
Billing document number can be displayed in customer line item display
(FBL5N) and not in G/L line item display (FBL3N).
The value of VBELN is saved in table BSEG. So, this means, you
have to define the field BSEG-VBELN as a special field in table
T021S. Then you can use it in FBL3N, because then the report looks
directly in BSEG-VBELN.
For further information,please read the SAP note 207436. You don't have to
implement the coding corrections, if they are already in your system
with the hotpackage. But it explains very detailed the system
behaviour. The example in the note with field EBELN could be
replicated on your field VBELN.
About the MEINS field, please refer to 1-U_MEINS (bseg-meins field).
The SAP note 215798 may also be helpful.
Mauri

Can anybody tell me how to install the soft phone tool in Interaction Center?

Hi,
Can anybody tell me how to install the soft phone tool in Interaction Center?
Regards
Raju

Hi Yoro,
it depends on your environment - if siemens provides some kind of SAP connector for CRM, then you can even work with deskphone. The CTI server is always responsible for communicating with both terminal and CRM server.
Example: customer calls through IVR and finally reaches operator with deskphone and CRM. The CTI server will ring the hardphone and at the same time sends signal Alerting with additional data to SAP CRM. The signal is communicated via SOAP using web service call.
The agent hear ringing from the deskphone and he can see on his CRM Interaction Center caller's number, associated name and company, which options the caller selected in IVR and so on. Now based on the CTI capability, he can click Accept in CRM and the call will picked by the deskphone, or he can reject the call, again from CRM.
In case you use siemens softphone then again, the CTI talks to both softphone and SAP CRM server. CRM simply does not care, whether the CTI channels the call to a softphone or a hardphone..
Ask your vendor for SAP connector for CRM, if there is any. Different CTI vendors supplies their connector (and usually license them separately). For instance, Genesys has Gplus adapter for SAP, Cisco offers its partner's solution from Bucher+Sutter, Solidus has also some licensed connector and so on.
What I have described is a server-server scenario. In such case, the CRM does not care where is the terminal, because the CTI takes care of it.
However, I have also seen one solution based on client-client integration. In that case, CRM Interaction Center talks to a softphone directly on operator's workstation. This is not supported by SAP and must be delivered on project basis.
Regards,
Dawood.

Can anybody tell me how to implement

hi guys
can anybody tell me how to impletement the bussiness content cubes . our company has impleted bw in china for a retail induarty . now they have copied the same template to korea . they want to implement same in korea as that of china bw . plz let me know how to install and run the query on this bussiness cubes. asap. thank u

kumar,
that's an extremely complicated question you have there - but we can start with the more basic answers:
- to activate business content cubes/infosources/infoobjects/etc. in BW, in your DEV box, run tcode RSA1, go to Transport Connection and select the business content you want to activate. and then click transport and activate. (you'll have to transport those entries to PRD later on naturally)
- to activate the data sources (extractors) in R/3, in your DEV box, run tcode SBIW, and click on "Install Application Component Hierarchy", as well as "Install Business Content" - you'll need to transport them later on too.
of course, i'd suggest that you take some training or read some more guides at help.sap.com or service.sap.com to help you with your objectives a lot more.
if these were helpful, do give some stars out. and if you have any more questions, don't hesitate to ask.
ryan.

Can anybody tell me how this effect was done

Similar Messages

Maybe you are looking for