Can Anyconnect 2.5 call Dial Up Networking
Is there any way that anyconnect 2.5 can call up a dial up networking connection prior to logon?
I know that Secure Mobility 3.0 can do this but not with WWAN (windows 7 gprs) connections.
We have users on anyconnect 2.5 that are using SBL but their modems are not connecting first.
If anyone knows a workaround please let me know
Sam
Is there any way that anyconnect 2.5 can call up a dial up networking connection prior to logon?
I know that Secure Mobility 3.0 can do this but not with WWAN (windows 7 gprs) connections.
We have users on anyconnect 2.5 that are using SBL but their modems are not connecting first.
If anyone knows a workaround please let me know
Sam
Similar Messages
-
I can't make a call when the network icon (top left) says: 3G.
I can be called when it's on 3G though... Also I can make calls when it says nothing or 3.5G.
Solved!
Go to Solution.It could just be a temporary network issue.
In the UK the issue plagued t-mobile for months in different area's of the country. 3.5g and GSM would work properly, 3G would not. Some days it was fine, others it was not and some places had the issue for weeks.
Is your phone unlocked? If so can you try a sim from another network to see if it has the same issue? This will help to see if it's phone or network. -
Can't make or recieve calls (report a network conn...
Hi All,
I purchased the N9 64Gb some months ago - and updated it with the latest 1.3 release.
After some usage - I started to notice that sometimes (once a day or once every second day) - the N9 ends up in some sort of mobile network deadlock.
Error description: When in deadlock - when trying to make calls - phone reports network error. When trying to browse the internet - no connection. If i call to my N9 - from another phone, the call do not go through.
Extra info: The N9 displays one bar of network connection, the icon for 3G is sometimes on.
If im connected to WLAN - I can browse the internet, else not.
If I reboot the N9, it will operate as normal again.
There is no warning or indication shown before it goes into the deadlock - of not being connected to the mobile network.
Idea's from an old member of the Low Level Yoda team in Copenhagen: The config flag that invoke a cell reconnect routine - after the phone have been in a network situation of no 3G or 2G basestation connect options, could have been "forgotten" to be raised in one of the the states of the "going out of coverage of a basestation" routine.
I hope that there is a solution - since the error leaves the end user (me) in an unfortunate situation of beliving to be online while its not the case. Its not acceptable at my workplace - that im often (randomly) not reachable by mobile phone.
Best Regards
Lars NielsenA) Which network operator do you use, in which country?
B) Did you try the GSM-only mode?
C) Did you try a new SIM? -
Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?
Hi chelsinator,
You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
Cheers,
GB -
We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??
hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport -
I can't make a call? The usual response I get i get is to check phone settings. I tried to reset the network already still the same problem. What is the possible problem? I can send message and receive calls
Hey Rache0105,
Some of the steps you've already done, but I would run through the iPhone Troubleshooting Assistant for call issues. You can find it here:
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
After upgrading to the new iOS7, I can't send out sms, I can receive sms, can make and receive call. I have already contacted my network provider, we changed sim card, I have tried to put my sim on other phone, and it's perfectly working. Help me pls.
To be honest not being able to send or recieve messages and data is a carrier issue, not a phone issue since u said that your calls are working, if i were you my first course of action would be to get a new sim card from virgin mobile, or to restore the device as new one more time, if you restore the device as new AND get a new sim card from your carrier and those features still dont work, i would take the device to an apple store
-
Can't call to a network in uganda.
Can't call a new network Suretelcom Uganda limited (mobile +25674).
make a test and call +256742020802 and let me know if you can reach this network then i will buy credit, otherwise those who have credit can't call this network in uganda. please solve it.
-
Hi
I would like to know how i can have dial-up networking (Using my Pearl 9100 OS 6 as a wireless modem for my Macbook Pro 6.2) and also the information that has to be applied for Telstra Australia..
Thankyou
Solved!
Go to Solution.Hi and Welcome to the Community!
Refer:
KB19641 How to Configure a BlackBerry smartphone as a tethered modem on a Mac
Note carefully please that this feature requires your service plan to include the capability...not all service plan levels include it, and not all carriers offer it. Further, sometimes additional software for your computer must be obtained from the carrier. But, any and all carrier-specific questions about this must be addressed to the carrier...here, we can only give you the generic information...your carrier must provide you with any specific information required.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I pressed the power button to lock my ipod touch,then I go to watch TV. Can I receive facetime calls though locking the screen for 5 minutes or longer?
I hope apple can let the ipod touch's wifi still connected though the screen is locked for a long timeYes,
http://www.tipb.com/2010/06/14/ios-4-feature-ipod-touch-wifi-stays-connected-asl eep-iphone/
B-rock -
How can i transfer a call from SIP 9971 to PBX system on CME router
hello everybody,
I have a critical problem about interaction of transfering feature between CME router and pbx panasonic system in some status. let me explain more detail about this issue..i have a SIP 9971(CP-9971) registered on CME at the one site and a voice gateway that is connect with PBX system through a E1 pri trunk connection at the other site. totally the integration between CME and PBX is ok and there is no problem in two direction, i mean i can call pbx system from cp-9971 and vise versa but when i call from a phone which is registered on PBX site to SIP 9971 which is registered on cisco CME call is connected,then when i try to transfer that call to another phone at PBX site, the session is open between two panasonic phones but no audio transmited in two direction. in addition every thing works fine about SCCP phones(transfer feature works fine). here is my configuration file. i hope someone could help me because i've searched a lot but no result help help help plz....
cme router 3845 configuration
VOIP-3845#show running-config
Building configuration...
Current configuration : 12657 bytes
! Last configuration change at 11:44:01 UTC Mon Oct 31 2011 by admin
! NVRAM config last updated at 11:44:02 UTC Mon Oct 31 2011 by admin
! NVRAM config last updated at 11:44:02 UTC Mon Oct 31 2011 by admin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname VOIP-3845
boot-start-marker
boot-end-marker
no aaa new-model
clock calendar-valid
dot11 syslog
ip source-route
ip cef
no ipv6 cef
multilink bundle-name authenticated
voice-card 0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
bind control source-interface Loopback10
bind media source-interface Loopback10
registrar server
voice register global
mode cme
source-address 192.168.2.1 port 5060
max-dn 720
max-pool 262
load 9971 sip9971.9-1-1SR1.loads
authenticate register
authenticate realm cisco.com
tftp-path flash:
file text
create profile sync 0063544528862458
camera
video
voice register dn 1
number 500
voice register dn 2
number 600
voice register dn 3
number 700
name test
voice register template 1
softkeys idle Newcall Redial Cfwdall
softkeys connected Confrn Endcall Hold Trnsfer
voice register pool 1
id mac B8BE.BF23.5242
type 9971
number 1 dn 1
template 1
username test password test
camera
video
blf-speed-dial 4 600 label "test"
voice register pool 2
id mac B8BE.BF9C.5476
type 9971
number 1 dn 2
template 1
username bank password bank
camera
video
voice register pool 3
id mac B8BE.BF9C.51D4
type 9971
number 1 dn 3
template 1
username test1 password test1
camera
video
voice register pool 4
id mac B8BE.BF9C.4FA2
number 1 dn 1
camera
video
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1576175886
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1576175886
revocation-check none
rsakeypair TP-self-signed-1576175886
crypto pki certificate chain TP-self-signed-1576175886
certificate self-signed 01
30820241 308201AA A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31353736 31373538 3836301E 170D3131 31303038 30393034
34365A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 35373631
37353838 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100D6EC 47BCDC3C 82F43FF3 23522678 2616868D 9910DCD2 E36016B3 D7B40DA7
53A6E339 4978D451 21F051BE B21F8AD5 86B952DC 1ECCE371 3E094B54 26A41E14
A3055C06 AE860756 425E5C50 E62B3287 631B1E87 9BAC2E39 2810E120 DA3BF823
947EA591 81CA5489 1B868239 E835EC7C 0AA7651A 22D6E47F 545EBEF3 A172C9A3
5A0D0203 010001A3 69306730 0F060355 1D130101 FF040530 030101FF 30140603
551D1104 0D300B82 09564F49 502D3338 3435301F 0603551D 23041830 1680146C
934AD072 99DDC600 ECD6F389 8F71E0C2 18EC2E30 1D060355 1D0E0416 04146C93
4AD07299 DDC600EC D6F3898F 71E0C218 EC2E300D 06092A86 4886F70D 01010405
00038181 000E82F6 5FBB847C 49226955 6F7DECE7 0B093513 D57C35D5 4CD22FA7
8144A080 B0D56C8D 86AF8156 0152443A A3FBE59F B1AEFFBC BEB43E09 35757BAD
4C06FC4A 0F3695E0 B00FBD30 4E8F36CE 7748F39C F9602650 7A1D2D48 DBC31237
AE3D63CE 593D31F5 62E4916F D20E30E8 30DC55C0 120FBD26 D2768DBC A67DDC34
5BDB66B1 E3
quit
license udi pid CISCO3845-MB sn FOC14421Q1Y
archive
log config
hidekeys
username admin privilege 15 secret 5 $1$Zf7j$P93opukmmEBIioVpjmHB3.
redundancy
interface Loopback10
ip address 192.168.2.1 255.255.255.0
interface Tunnel1
ip address 172.25.10.1 255.255.255.0
no ip redirects
ip nhrp map multicast dynamic
ip nhrp network-id 10
tunnel source GigabitEthernet0/1.1
tunnel mode gre multipoint
tunnel key 100
interface Tunnel2
ip address 172.25.11.1 255.255.255.0
no ip redirects
ip nhrp map multicast dynamic
ip nhrp network-id 20
tunnel source GigabitEthernet0/1.2
tunnel mode gre multipoint
interface Tunnel14
ip address 192.168.13.129 255.255.255.252
tunnel source GigabitEthernet0/1.1
tunnel destination 10.2.68.25
interface Tunnel18
ip address 192.168.13.137 255.255.255.252
tunnel source GigabitEthernet0/1.1
tunnel destination 10.9.160.236
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/1.1
encapsulation dot1Q 10
ip address 10.9.160.25 255.255.255.0
interface GigabitEthernet0/1.2
encapsulation dot1Q 50
ip address 10.10.9.25 255.255.255.0
router eigrp 202
network 172.25.11.0 0.0.0.255
network 192.168.2.0 0.0.0.15
redistribute static route-map MYMAP1
router eigrp 201
network 172.25.10.0 0.0.0.255
network 192.168.2.0 0.0.0.15
redistribute static route-map MYMAP1
ip forward-protocol nd
ip http server
ip http secure-server
ip http path flash:/gui
ip route 10.2.68.0 255.255.255.0 10.9.160.1
ip route 10.10.0.0 255.255.0.0 10.10.9.1
ip route 10.64.164.30 255.255.255.255 10.9.160.1
ip route 192.168.14.0 255.255.255.0 192.168.13.130
ip route 192.168.17.0 255.255.255.0 Tunnel18
ip access-list standard REDIS1
permit 192.168.14.0
permit 192.168.17.0
route-map MYMAP1 permit 10
match ip address REDIS1
snmp-server community test RO
tftp-server flash:term11.default.loads
tftp-server flash:dkern9971.100609R2-9-0-3.sebn
tftp-server flash:kern9971.9-0-3.sebn
tftp-server flash:rootfs9971.9-0-3.sebn
tftp-server flash:sboot9971.111909R1-9-0-3.sebn
tftp-server flash:sip9971.9-0-3.loads
tftp-server flash:skern9971.022809R2-9-0-3.sebn
tftp-server flash:sccp11.9-0-2sr1s
tftp-server flash:SCCP11.9-1-1SR1S.loads
tftp-server flash:apps11.9-1-1TH1-16.sbn
tftp-server flash:cnu11.9-1-1TH1-16.sbn
tftp-server flash:cvm11sccp.9-1-1TH1-16.sbn
tftp-server flash:dsp11.9-1-1TH1-16.sbn
tftp-server flash:jar11sccp.9-1-1TH1-16.sbn
tftp-server flash:term06.default.loads
tftp-server flash:sip9971.9-1-1SR1.loads
tftp-server system:cme/sipphone
tftp-server flash:Desktops/320x212x12/NantucketFlowers.png
tftp-server flash:Desktops/320x212x12/TN-CampusNight.png
tftp-server flash:Desktops/320x212x12/TN-CiscoFountain.png
tftp-server flash:Desktops/320x212x12/TN-Fountain.png
tftp-server flash:Desktops/320x212x12/TN-MorroRock.png
tftp-server flash:Desktops/320x212x12/TN-NantucketFlowers.png
tftp-server flash:Desktops/320x212x12/Fountain.png
tftp-server flash:Desktops/320x212x12/CiscoLogo.png
tftp-server flash:Desktops/320x212x12/TN-CiscoLogo.png
tftp-server flash:Desktops/320x212x12/List.xml
tftp-server flash:Desktops/320x216x16/List.xml
tftp-server flash:Desktops/320x212x16/List.xml
tftp-server flash:gui/admin_user.html
tftp-server flash:gui/admin_user.js
tftp-server flash:gui/CiscoLogo.gif
tftp-server flash:gui/Delete.gif
tftp-server flash:gui/dom.js
tftp-server flash:gui/downarrow.gif
tftp-server flash:gui/ephone_admin.html
tftp-server flash:gui/logohome.gif
tftp-server flash:gui/normal_user.html
tftp-server flash:gui/normal_user.js
tftp-server flash:gui/Plus.gif
tftp-server flash:gui/sxiconad.gif
tftp-server flash:gui/Tab.gif
tftp-server flash:gui/telephony_service.html
tftp-server flash:gui/uparrow.gif
tftp-server flash:gui/xml-test.html
tftp-server flash:gui/xml.template
tftp-server flash:ringtones/Analog1.raw
tftp-server flash:ringtones/Analog2.raw
tftp-server flash:ringtones/AreYouThere.raw
tftp-server flash:ringtones/AreYouThereF.raw
tftp-server flash:ringtones/Bass.raw
tftp-server flash:ringtones/CallBack.raw
tftp-server flash:ringtones/Chime.raw
tftp-server flash:ringtones/Classic1.raw
tftp-server flash:ringtones/Classic2.raw
tftp-server flash:ringtones/ClockShop.raw
tftp-server flash:ringtones/DistinctiveRingList.xml
tftp-server flash:ringtones/Drums1.raw
tftp-server flash:ringtones/Drums2.raw
tftp-server flash:ringtones/FilmScore.raw
tftp-server flash:ringtones/HarpSynth.raw
tftp-server flash:ringtones/Jamaica.raw
tftp-server flash:ringtones/KotoEffect.raw
tftp-server flash:ringtones/MusicBox.raw
tftp-server flash:ringtones/Piano1.raw
tftp-server flash:ringtones/Piano2.raw
tftp-server flash:ringtones/Pop.raw
tftp-server flash:ringtones/Pulse1.raw
tftp-server flash:ringtones/Ring1.raw
tftp-server flash:ringtones/Ring2.raw
tftp-server flash:ringtones/Ring3.raw
tftp-server flash:ringtones/Ring4.raw
tftp-server flash:ringtones/Ring5.raw
tftp-server flash:ringtones/Ring6.raw
tftp-server flash:ringtones/Ring7.raw
tftp-server flash:ringtones/RingList.xml
tftp-server flash:ringtones/Sax1.raw
tftp-server flash:ringtones/Sax2.raw
tftp-server flash:ringtones/Vibe.raw
tftp-server flash:APPS-1.2.1.SBN
tftp-server flash:SYS-1.2.1.SBN
tftp-server flash:GUI-1.2.1.SBN
tftp-server flash:CP7921G-1.2.1.LOADS
tftp-server flash:TNUX-1.2.1.SBN
tftp-server flash:TNUXR-1.2.1.SBN
tftp-server flash:WLAN-1.2.1.SBN
tftp-server flash:apps37sccp.1-2-1-0.bin
tftp-server flash:APPSH-1.3.1.SBN
tftp-server flash:GUIH-1.3.1.SBN
tftp-server flash:CP7925G-1.3.1.LOADS
tftp-server flash:SYSH-1.3.1.SBN
tftp-server flash:TNUXH-1.3.1.SBN
tftp-server flash:WLANH-1.3.1.SBN
tftp-server flash:SCCP11.9-2-1S.loads
tftp-server flash:Desktops/320x212x12/CampusNight.png
tftp-server flash:Desktops/320x212x12/CiscoFountain.png
tftp-server flash:Desktops/320x212x12/MorroRock.png
tftp-server flash:skern9971.022809R2-9-2-1.sebn
tftp-server flash:sip9971.9-2-1.loads
tftp-server flash:sboot9971.031610R1-9-2-1.sebn
tftp-server flash:rootfs9971.9-2-1.sebn
tftp-server flash:dkern9971.100609R2-9-2-1.sebn
tftp-server flash:kern9971.9-2-1.sebn
tftp-server flash:United_States/g4-tones.xml
tftp-server flash:English_United_States/gd-sip.jar
tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
control-plane
mgcp profile default
dial-peer voice 1 voip
description connection-trough-PBX
destination-pattern 0....
session target ipv4:192.168.13.130
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 100 voip
description K
destination-pattern 9T
session target ipv4:192.168.13.130
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 5 voip
shutdown
destination-pattern *3709
session protocol sipv2
session target ipv4:192.168.13.130
session transport tcp
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
dial-peer voice 2 pots
incoming called-number .
dial-peer voice 10 voip
gatekeeper
shutdown
telephony-service
em logout 0:0 0:0 0:0
max-ephones 262
max-dn 400
ip source-address 192.168.2.1 port 2000
load 7911 SCCP11.9-2-1S
max-conferences 12 gain -6
web admin system name admin secret 5 $1$IKnn$tyKyuBcGqXFl6nhxCSu.z0
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .T
create cnf-files version-stamp 7960 Oct 29 2011 12:39:25
ephone-template 1
softkeys connected Confrn Endcall Trnsfer Hold
keep-conference endcall
ephone-dn 1 dual-line
number 200
label test
name test
ephone-dn 2 dual-line
number 300
label Sepahbod
name Sepahbod
ephone-dn 4 dual-line
number 666
ephone-dn 5 dual-line
number 660
ephone-dn 6 dual-line
number 670
ephone-dn 7 dual-line
number 770
ephone-dn 8 dual-line
number 770
ephone-dn 9 dual-line
number 999
ephone 1
device-security-mode none
mac-address 18EF.639F.BCB0
keep-conference endcall
button 1:1
ephone 2
device-security-mode none
mac-address 0025.8418.B017
ephone-template 1
keep-conference endcall
button 1:2
ephone 3
device-security-mode none
mac-address F04D.A243.3154
keep-conference endcall
button 1:4
ephone 4
device-security-mode none
mac-address 6CF0.496A.69E9
button 1:4
ephone 5
device-security-mode none
mac-address 0015.E987.345F
keep-conference endcall
button 1:5
ephone 6
device-security-mode none
mac-address 0024.1DEA.614A
keep-conference endcall
button 1:6
ephone 9
device-security-mode none
mac-address 001D.7D4D.4DCB
button 1:9
line con 0
line aux 0
line vty 0 4
login local
transport input telnet
scheduler allocate 20000 1000
end
and Voice Gateway connected two PBX system configuration
Current configuration : 3486 bytes
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Voice-GW
boot-start-marker
boot-end-marker
card type e1 0 2
no aaa new-model
network-clock-participate wic 2
dot11 syslog
ip source-route
ip cef
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-net5
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
h323
voice-card 0
crypto pki token default removal timeout 0
license udi pid CISCO2811 sn FHK1352F0E9
username admin privilege 15 secret 5 $1$O6AN$1kvvqiLdIl3/ZTHoyYRy0/
redundancy
controller E1 0/2/0
framing NO-CRC4
pri-group timeslots 1-31
controller E1 0/2/1
interface Tunnel14
ip address 192.168.13.130 255.255.255.252
tunnel source FastEthernet0/1
tunnel destination 10.9.160.25
interface Tunnel17
ip address 192.168.13.134 255.255.255.252
tunnel source FastEthernet0/1
tunnel destination 10.9.160.25
interface FastEthernet0/0
ip address 192.168.14.252 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
ip address 10.2.68.25 255.255.255.0
duplex auto
speed auto
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn overlap-receiving
isdn incoming-voice voice
no cdp enable
router eigrp 201
network 172.25.10.0 0.0.0.255
network 192.168.14.0
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 10.9.160.0 255.255.255.0 10.2.68.1
ip route 10.128.0.69 255.255.255.255 Tunnel14
ip route 192.168.2.1 255.255.255.255 192.168.13.129
ip route 192.168.17.0 255.255.255.0 Tunnel14
tftp-server flash:SCCP11.9-2-1S.loads
tftp-server flash:jar11sccp.9-2-1TH1-13.sbn
tftp-server flash:dsp11.9-2-1TH1-13.sbn
tftp-server flash:cvm11sccp.9-2-1TH1-13.sbn
tftp-server flash:cnu11.9-2-1TH1-13.sbn
tftp-server flash:apps11.9-2-1TH1-13.sbn
control-plane
voice-port 0/0/0
caller-id enable
voice-port 0/0/1
voice-port 0/0/2
supervisory disconnect dualtone mid-call
dial-type pulse
disc_pi_off
output attenuation 1
echo-cancel coverage 32
timeouts call-disconnect 5
timeouts wait-release 1
timing hookflash-out 50
timing sup-disconnect 50
connection plar 600
caller-id enable
voice-port 0/0/3
caller-id enable
voice-port 0/2/0:15
mgcp profile default
dial-peer voice 1 pots
description connection-to-PBX
destination-pattern 0....
direct-inward-dial
port 0/2/0:15
forward-digits 4
dial-peer voice 10 voip
destination-pattern ...
session target ipv4:192.168.13.129
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 20 pots
description FXO-K
destination-pattern 9T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
direct-inward-dial
port 0/0/2
prefix 9
dial-peer voice 30 pots
description FXO-K2
destination-pattern 9T
direct-inward-dial
port 0/0/1
prefix 9
telephony-service
max-ephones 20
max-dn 100
ip source-address 192.168.14.252 port 2000
cnf-file location flash:
load 7911 term11.default.loads
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 1
number 770
line con 0
line aux 0
line 1/0 1/15
line vty 0 4
login local
transport input telnet
scheduler allocate 20000 1000
endHaving looked at your spreadsheet I see you're failing H323 transfers back to your ISDN system, but only under certain circumstances. Quite why, I'm not sure, possibly because you haven't codec defined on your H323 dial peers. or it could be something else
I think you may be able to work around the problem by adding
" supplementary-service h450.12 " under voice service voip on your CME router as a quick fix.
reference
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmetrans.html#wpxref44614
worth a try
Adam -
Dial-up networking implementation
Hi,
I'm currently developing an application that requires dial-up to a RAS server. Client hardware requirements for this app are windows box with either USB/Serial modem or ISDN connection.
Client app will be driven with Swing GUI but I need help on the dial-up part.
My questions are:
1. What kind of technology JAVA provides in regards to dial-up programming? I've considered commAPI but apparently this only work for serial modems only.
2. Can I use JTAPI to setup the dial-up and connection with either modem or ISDN?
3. Or can I use JNI to call windows native dial-up control from my application? If so how?
Glad if someone out there can at answer part of my queries?
ThanksYou can use the JDUN API (Java Dial-up Networking For Windows) that can be found at http://www.JavaAPIs.com. It supports enumerating RAS dial-up entry names, dialing entries, and hanging up entries.
-
UCCE 10.5: MR PG can not connect to SIP Dialer
Hello,
I have a strange problem with a SIP Dialer installation.
The MR PIM can not connect to SIP Dialer with the following error:
14:32:34:621 pg2a-pim1 Attempting to connect to MR application at IP address: 172.19.10.31, port: 38001.
14:32:34:621 pg2a-pim1 Trace: Transport: Making connection attempt to host1: 172.19.10.31 port: 38001.
14:32:35:713 pg2a-pim1 Trace: Transport: Connection to host1 attempt failed; error 10061..
14:32:35:713 pg2a-pim1 Trace: Transport: The attempt to connect was rejected..
14:32:35:713 pg2a-pim1 Trace: Transport: Make sure that the MR-PIM setup has the correct MR application hostname and port number..
14:32:35:713 pg2a-pim1 Trace: Transport: Make sure that the application is listening for connection at the correct port number..
14:32:35:713 pg2a-pim1 Trace: Transport: Connection closed..
I configured two duplexed SIP Dialers without Port Map. In baDialer logs I can see it can connect to Campaign Manager, CTI Servers, but it received "Port Map With ZERO Ports". Judging by what is written in SRND, this behavior is normal.
14:38:51:052 dialer-baDialer Trace: DialerMetrics::reset(), Dialer Metric subsystem was reset..
14:38:51:350 dialer-baDialer Initializing Event Management System (EMS) library.
14:38:51:350 dialer-baDialer EMS library initialized with write thread.
14:38:51:350 dialer-baDialer Trace: EMS Server pipe cce\Dialer\baDialerEMSPipe enabled for cce\Dialer\baDialer.
14:38:51:350 dialer-baDialer Trace: Release 10.5.1.0 , Build 2572.
14:38:51:350 dialer-baDialer Trace: Received dialer startup request..
14:38:51:350 dialer-baDialer Trace: Monitor Server pipe cce\Dialer\baDialerCmdPipe enabled for cce\Dialer\baDialer.
14:38:51:351 dialer-baDialer Trace: Dialer starting...ICM\cce\Dialer.
14:38:51:351 dialer-baDialer Trace: Using registry key: Software\Cisco Systems, Inc.\ICM\cce\Dialer.
14:38:51:351 dialer-baDialer Trace: Using registry key: Software\Cisco Systems, Inc.\ICM\cce\CurrentVersion.
14:38:51:354 dialer-baDialer Trace: EMT I/O completion ports: max threads=4, concurent threads=0.
14:38:51:355 dialer-baDialer Trace: Current Directory (C:\icm\cce\dialer).
14:38:51:355 dialer-baDialer Trace: Size of call result mapping table: 46.
14:38:51:355 dialer-baDialer Trace: DialerMetrics::Instance, Dialer Manager Creating New instance..
14:38:51:355 dialer-baDialer Trace: The performance monitor object instance (cce) was created successfully..
14:38:51:359 dialer-baDialer Trace: Attempting EMT connection to computer [172.19.10.30/172.19.10.30], port [40032].
14:38:51:611 dialer-baDialer Trace: EMT connection established.
14:38:52:368 dialer-baDialer Trace: Registering with Campaign Manager.
14:38:52:370 dialer-baDialer Trace: Config received: [1] dialer PortThrottle:15.000000.
14:38:52:370 dialer-baDialer Trace: Trying to connect to server: 172.19.10.31 on port: 42027.
14:38:52:370 dialer-baDialer Trace: socket open on Server=172.19.10.31 port=42027.
14:38:52:370 dialer-baDialer Trace: (CTIPROXY) Sending CTI OpenRequest for this Dialer.
14:38:52:372 dialer-baDialer Trace: CallListener creating mutex - Global\CCallListener8536.
14:38:52:372 dialer-baDialer Trace: (PM) Update Port Throttle. lPortThrottle=15.000000, dwPortThrottleCount=30, dwPortThrottleTime=2.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: Received Port Map With ZERO Ports.
14:38:52:372 dialer-baDialer Trace: (CLMGR) CTI Client Event Report Request, invoke: 1, clients: [1].
14:38:53:382 dialer-baDialer Trace: Dailer Status Change,Old Status:cce-Dialer BADialer_SIP -X [CM-X] [CTI-U] [Ports-X] [MR-X] [SIP-U] 0x0.
14:38:53:382 dialer-baDialer Trace: Dailer Status Change,New Status:cce-Dialer BADialer_SIP -X [CM-A] [CTI-A] [Ports C:0,R:0,B:0] [MR-X] [SIP-U] 0x3.
14:38:53:382 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****.
14:38:53:382 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.
14:38:53:382 dialer-baDialer Trace: (DD) **** Configured SoftPhone Channels: [0], Initialized: [0] ****.
14:38:54:396 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****.
14:38:54:396 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.
14:38:54:396 dialer-baDialer Trace: (DD) **** Configured SoftPhone Channels: [0], Initialized: [0] ****.
14:38:55:410 dialer-baDialer Trace: (DD) **** Media Routing PIM is not Connected ****.
14:38:55:410 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.
I double checked the IP Addresses, MR port(38001), network interfaces order in Windows and everything looks ok.
A possible problem could be that I see no application listening on port 38001 with netstat -na.
Does anyone have any idea what else should I check?
Many thanks in advance,
CristianAlso, here is an output of the Diag Portico when your MR is up and ports are registered and everything is healthy
-
I can`t make phone calls
I can`t make phone calls, when I dial, my phone shows "dialing" and then "call ended" , I have tried with different numbers and it is always the same, I did already a soft reset and it doesn`t work.
What could it be???
Post relates to: Treo Pro T850U (Unlocked)
This question was solved.
View Solution.Does this happen everywhere or only where there is a questionable signal? Try roaming:
Start > Settings > Phone > Services > Roaming > "Roaming Networks Only"
If that works better, complain to Sprint about your signal.
If that also doesn't work, you might need to hard reset your phone. Make a good backup first.
== Edit ==
I just noticed you have the unlocked Treo Pro. I don't know whether you have this option.
Message Edited by Jeffro on 06-22-2009 06:27 PM -
Can't make phone calls on my watch.
I can receive phone calls on my Apple watch but can't make outbound calls. The call ends immediately - it never dials or connects. Is anyone else having this issue?
Me again. Just spent half an hour in the Apple Store. It seems to be a network issue because when they ran a diagnostic it showed that all of the calls were being dropped by the network, not the device. So it may be that my carrier is not ready to deal with the new technology. Hopefully a carrier update will come soon. It is early days yet. Even the Apple Store employees did not have watches yet. They were envious of mine! And mine was the first "watch question" the guy at the Genius Bar had dealt with.
Maybe you are looking for
-
Bug sending email with Excel file (immediate reply would he helpfull)
Hi , Below is have pasted a sample code where it will sends a email along with an attachtment (xls) .where the email is working perfectly but the xls file attachtment has a blank space in the first line . where iam facing the problem , ie there sh
-
may i ask a question?about setting preferred wirelessnetwork in Shell script. my wifi was Identified by Certificate. "networksetup -addpreferredwirelessnetworkatindex <device name> <network> <index> <security type> [password]" problems i got that net
-
Hello All, I am having the same login problems everyone else seems to be having with a new twist, when i go to archive and install and hopefully fix this mess, i realize that i now only have 6gigs left on my hd, and i need 11 to install. I am assumin
-
SUNONE 7 Platform Crash under load
SunOne is crashing every 14 hours with a message: [07/Apr/2003:01:11:18] FATAL ( 5205): CORE3260: Server crash detected (signal SIGSEGV) [07/Apr/2003:01:11:18] INFO ( 5205): CORE3261: Crash occurred in NSAPI SAF error-j2ee [07/Apr/2003:01:11:18] INFO
-
Apps can not access photos. Apps never asked if they could access photos. Security>Photos - there are no apps on the list. I have restarted. Backed up, restored. No improvement. Thanks. ps my iphone allows access, so I know 'how' to do it usually.