Can anyone advise on this error: "Timeline", Error: "invalid format", Code: "14", Note: "Unknown

Hello,
Attempting to author a basic Blu-ray disc.  Everything appears to be ok when I run the build check to make sure that the disc will write out correctly.  When I start to build and burn the disc, Encore begins to import the video asset, and then quits with the following error message:
Blu-ray Object: "<Timeline> Untitled Timeline", Error: "invalid format", Code: "14", Note: "Unknown exception"
Does anyone have any thoughts regarding this error?  In the project timeline, everything plays ok - picture and sound.  I am importing a MPEG-2 file that came out of Compressor as an .m2v file.  Not sure if this could be the cause of the invalid format.  If so, odd that it imports into the project and simulates ok.
Thanks,
Mtbakerstu

Thanks Stan.
The project originates in Final Cut Pro, so it is easier for me to export out directly from FCP than to make an intermediate file to go into Premiere Pro.  Also, going directly makes it more fool proof in terms of potential downstream issues with the MPEG encode.
That said, do you have a file format recommendation if I were to export a master file out of FCP, and then import into PP ?
Regarding if I want the M2V to work, do you know what setting might be causing the error... presuming that's the issue.  Does it make sense that I would be able to see the video file workin in Encore, but when I try to then "build" it fails?
Thanks again, feedback most appreciated!
Mtbakerstu

Similar Messages

  • Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14", Note: "ERROR: This stream does

    I am trying to transcode a self contained FCP quicktime movie file and I get the message - Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14",
    Note: "ERROR: This stream doesn't include Picture timing SEI, Unit Offset = 785835706". I am going to use quicktime pro 7 to import  a quicktime movie instead of FCP self contained file into encore. But if anybody has any suggestions, please let me know. I have read about wrong field orders but I am using a custom preset with the field order set to upper (odd) - since I am using a Apple ProRes 422 (proxy) for the FCP sequence.

    This thread might be helpful:
    http://adobe.hosted.jivesoftware.com/message/3460426
    -Ramesh

  • I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem?

    I receive error messages when I am downloading free iphone apps. I get error message 9810 and 9834. Can anyone advise how to resolve this problem? The problem doesn't exist when I'm downloading apps for which I pay.

    Hi,
    See Here:
    http://support.apple.com/kb/TS1276
    From Here:
    http://support.apple.com/kb/TS1424

  • TS3694 Unable to upgrade ipad version 3.2.2;requires iTunes 10.6.3 but this won't download. Tried to restore but get "unknown error occurred (3194)". Please can anyone advise? Thank-you, Rosemary

    Tried to restore but get "unknown error occurred (3194)". Please can anyone advise?
    Thank-you,
    Rosemary

    Have you got the latest version of iTunes on your computer ? There is some troubleshooting for that error code on this page which you could try.

  • Hi i have an i phone 4 that unfortunately is just out of warranty, and when i plug it in to i tunes shows error code 9, i am due to buy a new phone and am looking at an i phone 5, can anyone advise me if the 5 is as unreliable and rubbish like the 4

    Can anyone advise me i have an i phone 4 and unfortunately when i plug it in to I tunes its picked up by the lap top but when it goes to reload with the bar on the screen it goes off and all i get is error code 9, i have tried for weeks to fix this and get no were if even tried putting on new firm ware ect but still has nothing, the sync is all grey so i cant click that, basically its a black bit of platic ive got here not an iphone and unfortunately one that has ran out of warranty. I have recently started my own company and need 4 contract phone 1 for me and 3 for my staff, i no the i phone 5 is a new phone so no will be able to tell me if its going to be as useless or unreliable as my 4,my staff are telling me to got for the 5 but im woried about waisting my money, or could any one advise me on an alternative for my lads. Thanks

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

    I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars.  I downloaded it for the first time a month ago and  had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error.  What do I do now?  Can anyone help with this?

    Hello easbda,
    Thank you for providing the details of the calendar issue you are experiencing with your iPhone.  I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

    when trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

    I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps.  I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps.  I updated the apps via iTunes and then synced again without an issue.
    iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

  • (OSStatus error -2009.)" Can anyone help with this?

    I am trying to export an iMovie and I keep getting the error "The project could not be prepared for publishing because an error occurred. (OSStatus error -2009.)"  Can anyone help with this?

    Hi
    This is what I found
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    But I don't know how it can be of help to You - as You've not supplied any info about Your set-up.
    Yours Bengt W

  • Cannot open Contact Sheet II on my Elements 12, gives me error message. Can anyone help with this?

    In Elements 12, I cannot open Contact Sheet II. I keep getting an error message.  Can anyone help with this?

    That's a different file.
    Try this:
    1. Click on your desktop
    2. Then in the Go menu click on Go To Folder
    3. Paste the following line in the Go To Folder dialog and press Go
    ~/Library/Preferences/Adobe/Plugins/Adobe Contact Sheet II PSE12/Elements
    4. That should open a finder window something like below.
       Drag the Adobe Contact Sheet PSE12 Prefs to the Trash on the dock
    5. Start the pse 12 editor and see the contact sheet II works.

  • Can anyone help with this error? ;At line 102 of file"C:/Program files (x86)/Macromedia/Dreamweaver

    Can anyone help with this error please?;At line 102 of file"C:/Program files (x86)/Macromedia/Dreamweaver 8/Configuration/Objects/Common/Images.js"; TypeError: cmdDOM.parentWindow.setFormItem is not a function

    If Dreamweaver shows a message saying "the following JavaScript error(s) occurred",  it's usually a sign of a corrupt cache file. The first thing you should always be to delete the file cache. If that doesn't work, delete your personal Configuration folder. Please go through the steps mentioned in thread Deleting a corrupted cache file.

  • Whenever I try to enter my credit card information into iTunes via either my mac book or my iphone it says there is an error and says "for assistance, please contact itunes support, etc...". Can anyone help with this?

    Whenever I try to enter my credit card information into iTunes via either my mac book or my iphone it says there is an error and says "for assistance, please contact itunes support, etc...". Can anyone help with this?
    I haven't had any luck at all getting it resolved using iTunes support so I'm hoping someone who's encountered the problem can help me.

    What did itunes suport tell you?
    They will need to solve this.

  • I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

  • Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235

    Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
    Fans are running permanantly and this is the error I get when running apple hardware test.

    SNS is a sensor error. The sensors read actual temperatures at several points inside the Mac chassis to decide when things are heating up, and which fan or fans speed up to improve cooling.
    Some of those sensrs are just a thermal-sensitive transistor mounted to a surface that conducts heat, and replacement does not run into big money. Disconnected wires are sometimes a possibility, especially if things were changed nearby, e.g., new heatsink.

Maybe you are looking for