Can anyone beat this? now waited over 9 months for...
Can anyone beat this? now waited over 9 months for BT to fix my BB
I have thanks, I was just answering 06jpearce
This is what I wrote:
Over 9 months and 20 openreach appointments and my broadband is still not fixed. They have tried the "put up with it or we will just say your line is too long and we will stop all broadband service" about 3 times now, but when I point-out my next door neighbour is with TalkTalk, and their BB is fine, and also point out I've had much faster BB for years, they back down.
My speed has gone from 2Mbps to 384Kbps, and every time the phone rings the broadband disconnects.
I am an IT engineer that works from home and about 5 times a day I have to tell my customers that my BB has dropped out and then I explain that I've been waiting 9 months for BT to fix it.
Also I used to set up my customers on BT Broadband but obviously I haven't been doing that for the last 9 months.
I'm sure that the fault is in the old aluminium cable that Openreach don't want to touch (in fact that is what the last engineer told me) .
When you add up the cost of all these engineers calls, and the loss of business from the bad name you are getting, it would have been far cheaper to replace the cable.
Similar Messages
-
Can Anyone Beat This for Terrible Service
Verizon should be ashamed of itself. I started with them in Feb. 2011. I bought a Droid x, which began to reboot. They replaced it with a 'refurbished' model. That rebooted. They replaced with this yet *another* Droid X, which not only rebooted but the screen went black during a call and couldn't be accessed. I had to do a battery pull.
A nice supervisor upgraded me for free to a X2. The first time I used the camcorder, it froze the phone. New supervisor offered me a free Incredible 2, but I didn't want that. He said he'd already ordered it for me but when it came, I was to retun it and let customer service know and they'd switch it with a new X2. When the time came to return it, customer service said that the supervisor was on vacation, no one could contact him and he left no instructions to replace my X2 with a new one. A *month* later, with *no one* able to get in touch with this supervisor, another supervisor tells me the only way to get a new X2 was to extend my contract 6 months and I'd get a gift card to pay for the new X2. Time came to use the gift card and there was still $109 left the card didn't cover. Took a lot of work to get that resolved.
Three weeks go by and the phone is perfect......until 2.3.4 is upgraded and guess what? Yep. The camcorder freezes. Verizon is totally useless and wants me to go back to refurbished models (what did I extend my contract for???) and switches me over to Motorola - in the Philippines, who can't help me. When I finally talk to someone at Motorola, they want me to send them my phone for 2 weeks with no loaner so they can reload the OS.
And Verizon? The rep I spoke to said that Verizon is very well aware that these phones are buggy and the repairs and returns are "making them look so bad that they have a policy change coming so that all returns are to be sent to Motorola instead of them."
I want out of my Verizon contract. I bought my phone and service in good faith and I've not have one phone longer than a month because of all the problems with a phone they *know* and *admit* is buggy. I'm filing complaints with the FCC, the FTC, Verizon, Motorola, the California Attorney General's office, and the BBB. No company should sell devices they know are faulty and yet Verizon is. The rep admitted it. And from all the other people I see on this forum talking about how they've returned their phones numerous times, I am far from the only one.
Shame on you, Verizon! You should do the honest thing and let me out of my contract so I can sign with a company who doesn't sell faulty devices.I have thanks, I was just answering 06jpearce
This is what I wrote:
Over 9 months and 20 openreach appointments and my broadband is still not fixed. They have tried the "put up with it or we will just say your line is too long and we will stop all broadband service" about 3 times now, but when I point-out my next door neighbour is with TalkTalk, and their BB is fine, and also point out I've had much faster BB for years, they back down.
My speed has gone from 2Mbps to 384Kbps, and every time the phone rings the broadband disconnects.
I am an IT engineer that works from home and about 5 times a day I have to tell my customers that my BB has dropped out and then I explain that I've been waiting 9 months for BT to fix it.
Also I used to set up my customers on BT Broadband but obviously I haven't been doing that for the last 9 months.
I'm sure that the fault is in the old aluminium cable that Openreach don't want to touch (in fact that is what the last engineer told me) .
When you add up the cost of all these engineers calls, and the loss of business from the bad name you are getting, it would have been far cheaper to replace the cable. -
Can anyone beat this epic stock photo?
To me anthony7445 picture is much funnier.
A coworker sent me a blog post for me to check out, and right as I opened the page this was staring me right in the face:
First of all... why?? Second of all, is this something they were expecting people to use unironically? Or only to make fun of how ridiculous stock photos are in the first place? Are they in on the joke or is this 100% pure unintentional comedy?
I'm at a loss... Also if you have any better ones, please send them my way.
This topic first appeared in the Spiceworks Community -
Can anyone translate this answer to my question for me =/
I've been doing pretty well with my Java programming and am getting into the 3D API and have been able to teach myself with the tutorial at the sun website. But the tutorial frequently references these examples I couldn't find, I just got some little .jar file. I asked how to get these examples and when I said I couldn't understand their answer they told me to come here.
"You need to extract the example files from the jar archive called
examples1_6.jar
with
jar xvf examples1_6.jar
if that is the small file you refer to
You can find out about the jar archives in the java sdk docs, and get a list of jar parameters with
jar -help
Make sure that the jar utility in java/bin is on your PATH
Hope helps"Oh, well that explains pretty much everything and I've got it.
The file never had that winzip or winrar logo on it so I never thought to do that. -
Can anyone answer this question about unlimited data?
I currently have a phone with ATT... a Samsung. Contract has been up for several months.
I have the unlimited data plan for $30 a month.
When I buy the new iPhone will I be able to just transfer my $30 a month unlimited data plan from my old Samsung phone to my new iPhone's new 2-year contract? Or, will I have to switch to the new data plan thing (with no more unlimited data)?
Can anyone answer this? Been looking online for an answer and got zilch. Thanks.Why are you asking this in a user-to-user iPhone forum? The ONLY source for a definitive answer about the brand new, not yet implemented AT&T data plans is AT&T. You need to contact them. Any "answer" you get here is purely guesswork.
-
I downloaded the lateest update and I can't turn off my apps like I did on 6os. The 7os is different and I can't seem to find out if apps turn off now by just closing them. Can anyone explain this to me? Please
Double tap the Home button and swipe the app preview page up
iOS 7 also allows apps to run while they aren't open.
You can manage these here:
Settings > General > Background App Refresh -
I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??
You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212 -
Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.
If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.
-
My daughter has used my computer to log into iTunes and download music but now it won't let me download recently purchased music from my iPad onto my computer. I want to transfer the recently purchased songs onto my iPod so how can I do this now? iTunes now says that I have to wait another 55 days! There must be a way to do this since I have paid for them.
In iTunes sign out of your daughters Apple ID and sign in with your own.
-
Can anyone explain this: Numeric or Value Error Line 1
I have a stored procedure that starts out like so:
PROCEDURE test_proc(param1 IN VARCHAR2, param2 IN VARCHAR2, param3 OUT
SYS_REFCURSOR) IS
v_var varchar2(5);
BEGIN
SELECT * FROM. . .
The procedure tested fine in PL/SQL Developer. When calling from
ODP.NET like so. . .
OracleCommand cmd = new OracleCommand("test_proc", <connection>);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("param1", "somevalue");
cmd.Parameters.Add("param2", "XX");
cmd.Parameters.Add("param3", OracleDbType.RefCursor,
ParameterDirection.Output);
DataSet ds = new DataSet();
OracleDataAdapter da = new OracleDataAdapter(cmd);
con.Open();
da.fill(ds);
con.Close();
. . .the procedure executed as expected. If I changed the value of
param2 to "XXX" or any value three chars long I got the "ORA-06502:
Numeric or Value Error at Line 1" error.
After beating my head against the wall for hours, I tried changing the
size of v_var to 50, and the error disappeared. Mind you, the error
was being thrown long before v_var was being set further down in the
proc. Even more interesting is that the possible values of v_var were
all less than 5 chars wide. Most interesting: the value of p_param2 had nothing whatever to do with v_var.
Can anyone explain this?Hi,
Is your database 9206 by chance? Re: Error ORA-06502 PL/SQL
Cheers,
Greg -
HT3275 Please can anyone explain this to me
Please can anyone explain this to me - thank you -
Time Machine couldn't complete the backup to time capsule - The backup disk image “/Volumes/Data-1/Alyson’s iMac.sparsebundle” is already in use.The explanation is a long standing bug in Lion and Mountain Lion, but what you might really be asking is how to fix the problem.
Pull the power cord from the back of the Time Capsule
Wait a few minutes
Plug the power cord back in
If that does not fix the problem you will need to dig deeper. See #C12 in Pondini's excellent Time Machine - Troubleshooting.
http://pondini.org/TM/Troubleshooting.html -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
Can anyone explain this behavior and tell me how to fix it?
Using NetBeans 6.5 on Windows, Glassfish v2.1
I have a JSF application with a page that has a tab set.
On one of the tabs I have a panel with company information.
One of the components on the page is an InputText field with the value bound to a session bean variable.
The tab also has an Add button.
Here is what the JSP looks like for the input text and button components
<h:inputText binding="#{MainPage.companyNameTF}" id="companyNameTF" readonly="#{SessionBean1.readOnlyFlag}"
<h:commandButton action="#{MainPage.mainAddBtn_action}" disabled="#{SessionBean1.disableEdit}" id="mainAddBtn"
style="font-family: Arial,Helvetica,sans-serif; font-size: 14px; font-weight: bold; left: 425px; top: 380px; position: absolute; width: 75px" value="Add"/>
This is all plain vanilla stuff and I would expect that when the Add button is pushed, the session bean property would be filled with
the value entered in the input text field.
In the java code for the page, I have a method to process the Add button push.
Originally, it just called a method in the session bean to check that a value was entered in the input text field by checking the bound
session bean property.
For some reason, that was not getting filled and I was getting either a null or empty string rather than the value in the text field.
I added some checking in the method that processes the Add button push so I could check the values in the debugger.
Here is a sample of that code:
public String mainAddBtn_action() {
String s = sb1.getCompanyName();
s = (String)this.companyNameTF.getValue();
s = (String)this.companyNameTF.getSubmittedValue();I check this in the debugger and NONE of the variants that I have listed have the value that was entered into the text field.
The submittedValue is null and the others are empty strings (that is what they were initalized to).
This is all pertty straight forward stuff and I am at a loss to explain what is happening.
Can anyone expain this behavior, and, most important, how can I force the values to be present when the Add button is pushed.
I have never experienced this problem before, and have no clue what is causing it.
Thanks.Basically, the component bindings are just being used in plain vanilla get/set modes.
I set them to "" when I do a clear for the fields and they are set to a value via the text field.
No other action other than to read the values via get to insert them into the database.
And, I always use the get/set methods rather than just setting the value directly.
This is what is so strange about this behavior - I have created dozens of database add/update/delete pages using this same model and have not had a problem with them - even in a tab context.
Not a clue why this one is different.
I did notice that I had an error on the page (in IE7, you get a small triangle warning sign when something is not right).
I figured that might be the problem - maybe buggering up the rendering process.
I tracked that down and do not get that anymore (it had to do with the PDF display I was trying to get working a while back), but that did not resolve the problem.
I don't think there are any tab conflicts - none of the components are shared between tabs, but I will see what happens when I move a couple of the components out of the tab context.
I noticed that it seems to skip a cycle. Here is what I can do.
1) Fill in text fields and add a record - works fine the first time.
2) Clear the text fields
3) Enter new data in the text fields and push Add
4) I get an error saying fields are blank from my data check process.
5) Enter new data and push Add - the record is added with the new data.
My work around is to not enter data in step 3 and just accept the error message in step 4, then go ahead and enter the real data in step 5.
Very ugly, but it works every time. -
Can anyone read this Apple crash report?
Hi everyone!
My iMac's been absolutely fine since I bought it. The Lion upgrade was smooth. I upgraded on the first day Lion became available.
In the past week, I keep getting every other day a progressive gray screen and a warning that the computer needs to restart. I've no idea what's causing the crash... it happens when I have the standard suite of apps running (Mail, iTunes, Safari, etc) so no exotic application.
Here's a crash report. Can anyone read this and pin point the problem?
Thanks!
Interval Since Last Panic Report: 26855 sec
Panics Since Last Report: 1
Anonymous UUID: 2A90D08F-7981-4C26-90A0-88431085705A
Thu Jan 19 21:02:56 2012
panic(cpu 1 caller 0xffffff8000570f80): "MCHECK: m_type=12350 m=0xffffff807b9b6500"@/SourceCache/xnu/xnu-1699.24.8/bsd/kern/uipc_mbuf.c:3129
Backtrace (CPU 1), Frame : Return Address
0xffffff808045bad0 : 0xffffff8000220702
0xffffff808045bb50 : 0xffffff8000570f80
0xffffff808045bb80 : 0xffffff8000572c77
0xffffff808045bc10 : 0xffffff80005731d6
0xffffff808045bc30 : 0xffffff8000358c25
0xffffff808045bd10 : 0xffffff8000353729
0xffffff808045bd50 : 0xffffff8000580644
0xffffff808045be40 : 0xffffff8000563973
0xffffff808045be70 : 0xffffff80005614bf
0xffffff808045bf00 : 0xffffff8000561612
0xffffff808045bf50 : 0xffffff80005caa9b
0xffffff808045bfb0 : 0xffffff80002d8363
BSD process name corresponding to current thread: IMServicePlugInA
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 7371663855074
last loaded kext at 7163667149728: com.trusteer.driver.gakl_driver_2 1 (addr 0xffffff7f8079d000, size 28672)
last unloaded kext at 7058117348300: com.apple.driver.AppleUSBCDC 4.1.15 (addr 0xffffff7f80799000, size 12288)
loaded kexts:
com.trusteer.driver.gakl_driver_2 1
com.kaspersky.kext.kimul.38 38
com.parallels.kext.prl_vnic 6.0 12106.692267
com.parallels.kext.prl_netbridge 6.0 12106.692267
com.parallels.kext.prl_hid_hook 6.0 12106.692267
com.parallels.kext.prl_hypervisor 6.0 12106.692267
com.parallels.kext.prl_usb_connect 6.0 12106.692267
com.kaspersky.kext.klif 2.2.0d14
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.kext.ATIFramebuffer 7.1.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AirPort.Atheros40 501.58.1
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleBacklight 170.1.9
com.apple.ATIRadeonX3000 7.1.4
com.apple.driver.AppleIntelHD3000Graphics 7.1.4
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.driver.Oxford_Semi 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBEHCI 4.5.5
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.1.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.1.0
com.apple.driver.AppleBluetoothHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.kext.triggers 1.0
com.apple.driver.AppleMultitouchDriver 220.62.1
com.apple.driver.IOBluetoothHIDDriver 4.0.1f4
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.iokit.IO80211Family 411.1
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.driver.AppleThunderboltEDMSink 1.1.3
com.apple.driver.AppleThunderboltEDMSource 1.1.3
com.apple.kext.ATI6000Controller 7.1.4
com.apple.kext.ATISupport 7.1.4
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.4
com.apple.driver.AppleSMC 3.1.1d8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.AppleThunderboltDPOutAdapter 1.5.8
com.apple.driver.AppleThunderboltDPInAdapter 1.5.8
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.8
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 403
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.5
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
Unable to gather system configuration information.Model: iMac12,1, BootROM IM121.0047.B1D, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500.11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: 7600 Series, 0x043d (Lexmark International Inc.), 0x0150, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: eGo HDD, Iomega, 800mbit_speedThis crash reports says...
OS: 10.7.2
Processor: Intel 64-bit
Computer: iMac 10 generation, lowest-end model
Interval Since Last Panic Report: 26855 sec
Panics Since Last Report: 1
Anonymous UUID: 2A90D08F-7981-4C26-90A0-88431085705A
Thu Jan 19 21:02:56 2012
panic(cpu 1 caller 0xffffff8000570f80): "MCHECK: m_type=12350 m=0xffffff807b9b6500"@/SourceCache/xnu/xnu-1699.24.8/bsd/kern/uipc_mbuf.c:3129
Backtrace (CPU 1), Frame : Return Address
0xffffff808045bad0 : 0xffffff8000220702
0xffffff808045bb50 : 0xffffff8000570f80
0xffffff808045bb80 : 0xffffff8000572c77
0xffffff808045bc10 : 0xffffff80005731d6
0xffffff808045bc30 : 0xffffff8000358c25
0xffffff808045bd10 : 0xffffff8000353729
0xffffff808045bd50 : 0xffffff8000580644
0xffffff808045be40 : 0xffffff8000563973
0xffffff808045be70 : 0xffffff80005614bf
0xffffff808045bf00 : 0xffffff8000561612
0xffffff808045bf50 : 0xffffff80005caa9b
0xffffff808045bfb0 : 0xffffff80002d8363
This is a kernel error. Did your screen give you this error? This is well know as the "Black Screen Of Death". Just restart your computer and see what happens.
Source of picture: http://en.wikipedia.org/wiki/File:Panic10.6.png -
It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?
lovinmymac wrote:
I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
Ian
Maybe you are looking for
-
All of my downloaded apps will exit out of them, how do I fix this?
The apps I've downloaded will open and close out after a short period of time, I've turned off my location services as suggested but they still do it. I have tons of space left on my iPad so I have no idea how to get them to stop...help please!
-
Adust feature not working follow up Question/ lost album folders!
I tried trashing my iphoto plist from preferences and now have lost all my album folders which have very important projects sets I'm working on. I didn't empty the trash so I still have the folder but putting it back didn't seem to work. Is there a w
-
Reboot fails after software update - what now?
I've just performed a regular software update. I think it included the following 4 items: - iPhoto 08 (enhanced printing etc.) - Raw module update - 10.5.5 update - ??? don't remember this one Three of the updates required a reboot so I opted to rebo
-
Error when starting Lync 2013 meeting with Office 32 bit windows 8.1 64 bit.
Hi, have Office pro 2013 32 bit and lync 2013 32bit on win 8.1 64 bit. And I can't start lync meeting's. Lync are working. When i start lync detting error " that lync have trouble and that the program has to be restarted." the choise is to repare or
-
Editing Contacts via keypad causes OPERATION FAILE...
Initially I entered info for approximately 60 contacts into my new Nokia 6131 phone memory using the phone keypad. Everything worked fine. Then I discovered the CONTACTS application in Nokia PC Suite software was a lot easier to use for data input, s