Can anyone comment on these two plans plaease.. these decrease the cpu time

Thanks I have marked the question as answered.
Edited by: SMY on Jul 14, 2009 11:36 AM

- Which query actually runs faster? Which query actually does less I/O?
- Why did you change the optimizer mode? Why did you change the optimizer_index_cost_adj? What lead you to believe that one or both of these were incorrect?
- What version of Oracle?
With just two query plans, there isn't much that anyone can say. The optimizer expects the latter plan to run more quickly, but that's only because you've told it that you only want the first 100 rows and that index accesses are substantially cheaper than it thought. If either of those are incorrect, the optimizer's new guess is likely worse than its first guess.
Justin

Similar Messages

Can anyone give a good contact number for someone in the upper level of customer service

can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.

Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.

Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.

Holding down the shift key while iTunes is opening. That will bring up the 'choose iTunes library' dialog. Select 'Choose LIbrary' from the choices and navigate to your music folder and iTunes music folder.
Or refer to this article:
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866

Can I connect my Mac to two separate wireless networks at the same time?

Need some assistance with some advanced wireless networking please....
Upstairs I have a D-link wireless router connected to the internet and wired to a couple of PCs. Downstairs I have a minimac linked to my hifi via an airport express. I have bought a D-Link DWL-G122 usb wifi dongle.
So I want the mini mac to connect to the airport express on one wireless network (strong signal) and to be able to connect to the internet on another network (weak signal) via the usb wifi /router.
But the airport software and the d-link driver seem to conflict and both try to take control of the two wireless devices.
Is there any way round this to be able to run one mac with two wireless network devices at the same time?
Thanks

While those with more experience may be able to correct me, I'm pretty sure that you can only connect to one wireless network at a time with your Mac Mini, unless D-Link provides their own proprietary software that bypasses the computer's Airport settings.
Using the AirPort hardware you can only connect to a single wireless network at any given time. However in this situation the 2 attempted connections are via USB and AirPort. Therefore this requires nothing special of the AirPort drivers or settings.
It does require that the Mac OS and applications have the capability to use either network connection (USB or AirPort) depending on what data they are trying to get. In general I understand how it is theoretically possible but I have no idea if you can configure OS X to do it.
...I believe one of the options when setting up the Airport Extreme Base Station is that you can extend a wireless network already in place.
True but the D-Link is not compatible with Apple's WDS therefore this is not possible in this situation.
If you have a newer Airport Extreme Base Station with a USB port on it...
FYI, every AirPort Extreme base station (AEBS) has a USB port.
BTW, birky has indicated that he/she is using an AirPort Express (AX) not an AEBS.

TS4212 can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. I have been looking for over a week now   and even chatted with the USA but cannot get it to work

can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected.   what do I do
I have been looking for over a week now   and even chatted with the USA but cannot get it to work.
I am really struggling

Thanks
someone named Eloisa   she gave me   a phone no.   or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

Can anyone give a good contact number for someone in the upper level of customer care

Duplicate post - please see:
can anyone give a good contact number for someone in the upper level of customer service
Message was edited by: Admin Moderator

Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Can anyone tell me why I am unable to apply the txt animation in Elements 10?

Can anyone tell me why I am unable to apply the txt animation in Elements 10? The "apply button" doesnt engage allow it to be selected?
Would love some help?
Darrell.

Dazza - wildvision
Are you applying text animation
a. to Default Still text
and
b. a single line of text
If you do not do the above text animation fails. Please check out my blog post for details.
http://www.atr935.blogspot.com/2013/07/pe-titler-part-1-text-animations.html
Please review the above. If any questions or clarification needed, please do not hesitate to ask.
Thanks.
ATR

Can anyone tell me how to post videos taken on the iPhone that are now stored on the Air on Facebook?

Can anyone tell me how to post videos taken on the iPhone that are now stored on the Air on Facebook?

Hi
Yeah got onto that but it won't load up anything readable. It just produces a little annimation of 35mm film strip and when you click on it - nothing. All you end up doing is clicking on the X in the top right hand corner of the annimation and deleting it. Really frustrating because uploading from the iPhone is simple, but I've deleted it off that and can't get it back from the Mac to the iPone either. Seem to be trapped no matter what i do.
Thanks for your help though

I have a one-column table in pages. Each cell has text and a number separated by a colon. Can I automatically make it two column with everything to the right of the colon in the second column?

I have a one-column table in pages. Each cell has text and a number separated by a colon. Can I automatically make it two column with everything to the right of the colon in the second column?

Here's another way that is pretty quick to do.
Formula in Column B is:
=LEFT(A, FIND(":", A))
Formula in Column C is:
=RIGHT(A, LEN(A)-FIND(":", A))
You can eliminate the colon from the result in column B by writing:
=LEFT(A, FIND(":", A)-1)
Once you do the conversion, you should freeze the result by Selecting columns B and C and then Command-C, Edit > Paste Values.
Regards,
Jerry

Can you use two duetts on logic at the same time

can you use two duetts on logic at the same time so i can have inserts

tracktor wrote:
can you use two duetts on logic at the same time so i can have inserts
Before going ahead on this you should definitely check with Apogee as I think they do not recommend using their interface(s) in an Aggregate device.
Maybe that's changed.. not sure.
pancenter-

Can two subVI show up at the same time?

Can two subVI show up at the same time?

Hi,
Save the vi as a template (*.vit), then you can open it (dynamically) as
often as you want. If you make the vi "floating", you get the best results.
Regards,
Wiebe.
"smal" wrote in message
news:[email protected]..
> Hi,
> What if the subvi has to be called dynamically (hence using call by
> refrence node).
> In fact I want to run a subvi each time a button is clicked
> independent of the others(it gets just some parameters from the caller
> vi & must continue running so the user can interact with it via its
> front panel )
>
> Thanks for your attention in advance.

Can anyone comment on these two plans plaease.. these decrease the cpu time

Similar Messages

Maybe you are looking for