Can anyone confirm their bluetooth connection to car works fine?

I am having issues with incoming calls not displaying the phone number or contact name on my car's display.   Can anyone confirm that your S4 is able to "push" this incoming call information to your car's display over bluetooth?     Thanks!  

Here is my story so far:
I properly synced my new S4 to my car (2012 Prius Gen III - Package IV) and refreshed my phone book. All contacts are shown on my car's display. Out going calls work fine and I can use voice command to dial by name and all the proper details and picture of my contact show up on the screen for outgoing calls. However, if I receive an incoming call from the same exact contact, it shows up with this message "incoming call from unknown". If I later go into my call history, it shows that call with the proper phone number so I know my car is able to match the phone number with the contact. I think the issue must relate to the S4 not properly pushing the phone number or caller id to my car when it gets a new incoming call.
Here is the strange part, my old phone (Droid X) had no problems syncing with my car and both incoming and outgoing calls would show the proper contact person on the display screen.
I just synced my wife's iphone 5 to the car and both outgoing and incoming calls are displayed just fine.
I just synced my co-workers Droid Razor (4.1.2) and that works fine. 
Based on this, my assumption is there is a problem syncing with Galaxy S4 and/or perhaps the bluetooth version with 4.2.2.
Thanks for any help.

Similar Messages

  • I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

    I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

    Hi there soulboycraney,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    -Griff W. 

  • Can anyone confirm if Elgato Turbo.264 HD works with iMovie '11?

    I've been reading a couple of accounts of people who seem to be using Turbo.264 HD (hardware) to accelerate iMovie '11 encoding.
    Yet on the Elgato site there is an (admittedly old) support article that says it is only compatible with iMovie '09. Other reviews around the 'Net say the same, and have not been updated with info about iMovie '11.
    So can anyone confirm that they have a working setup with iMovie '11 and Elgato Turbo.264 HD (hardware version)? I'd like to make sure before I plunk down the money.
    P.S. I know it doesn't seem to work with Final Cut Pro X, I'm focusing on iMovie for now.

    confirmed
    does an excellent job with my set-up (MacMIni, C2D, 2.26GHz) ...
    in FCPX it's a 2step process: export timeline, drag resulting .mov into Turbo.app ...

  • Anyone else lose bluetooth connection with car radio since updating to IOS 6?

    I've lost consistent connection between my iPhone 4S and car radio (Kenwood) ever since I upgraded to IOS 6.  This is apparantly happening to lots of people. I use this bluetooth for hands-free calling on my phone so I'm hoping Apple will come out with IOS 6.1 soon to address this software patch.  Others experiencing this with their phones and car stereo systems?

    I'm having probems as well.  I can make calls and play music but I can only change songs on my iPhone 4S but not with the controls on the car.  I was able to do this before the upgrade.

  • I can't get Thundebird to connect on Win7, worked fine on XP

    When my old XP computers all died, I transferred TB to a Win 7 toshiba laptop that had been upgraded from Vista.
    The setup seemed to go fine and all old files were transferred but the system refused to connect and download any new emails. None of the help articles have been of any help. It's set up using imap but I don't know if I have the right settings and I really don't know what I'm even trying to find.

    https://support.mozilla.org/en-US/questions/1038427
    The only obviously odd thing there is account 3:
    account3:
    INCOMING: account3, , (imap) imap.googlemail.com:143, plain, passwordCleartext
    Google use SSL and port 993 for IMAP (as the other gmail accounts are set) and it's a bit of a mystery as to how you'd be allowed to use the setting shown here.
    However, this wouldn't explain all the other accounts not working.
    What firewall do you use? Has Thunderbird been explicitly permitted to pass?

  • Can anyone confirm 10.4.8 supports iSync for SE P990i?

    Hi everyone.
    10.4.8 Update is out. Has anyone or can anyone confirm if this OS version's iSync supports the Sony Ericsson P990i?
    Thanks and cheers

    The specific issue that stops the M600, P990 and W950 working with iSync is this:
    iSync (over Bluetooth) relies on there being something called "OBEX SyncML Client" and also (the old way) "OBEX IrMC Sync Server" in the phone. Symbian phones do not have this functionality.
    Sony Ericssons latest Symbian phones have something called m-router connectivity which is not supported by iSync currently.
    For this issue to be resolved in iSync, Apple will first have to add m-router connectivity to iSync. Then third-party manufacturers can add the Phone Plugins to iSync for individual phone models.
    There's nothing to stop Sony Ericsson or a clever third-party developer writing a separate application with m-router connectivity built-in. But as iSync is an integral part of the Mac OS, it makes sense to incorporate it into that.
    With iSync 2.3 Apple have given handset manufacturers the means to create iSync Phone Plugins for their phones. So, in theory, Sony Ericsson could include a Phone Plugin for iSync in the box with the phone at purchase, and I know that Apple and SE are working towards this.
    For Symbian phones, however, Apple first has to add the m-router support to iSync. Who knows how far along, or even if they are working on this?
    With Mac OS X 10.4.8 just being released, and 10.5 only a few months away, I wouldn't be surprised if this is a Leopard feature.

  • Can anyone confirm if FaceTime is working in Oman ?

    I have an ipad2 bought in USA and am presently in muscat, oman. Can anyone confirm if FaceTime can be used in oman on omantel wifi network ? The moment I dial a contact for FaceTime it says connecting after some time it says connection lost and I cannot do FaceTime. Please help me solve this problem, thanks

    It was working but it has been out for a couple of days

  • How can I rename a bluetooth connection on my iPhone?

    How can I rename the bluetooth connections on my iPhone? I have 2 cars with the same handsfree bluetooth systems and they show up with the same name under my iPhone's bluetooth connections. I'd like to rename them so I can identify which car belongs to which connection.

    I was afraid you were going to say that was the case. I couldn't find any way to do it. It's amazing that something so simple, and something that's been available on every phone I've owned for the last 15+ years, isn't available on an iPhone.

  • It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

    It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

    lovinmymac wrote:
    I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
    You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
    Ian

  • Can anyone confirm a diagnosis for my Macbook air screen please?....

    Can anyone confirm a diagnosis for my Macbook air screen please?....
    Started about 12 months ago randomly, the screen will just turn bright colours & is unreadable, the only way to remove it is to shut down & restart from on/off button....
    Any help advice or solution would be appreciated..... Many thanks

    Bring the picture with you when you take it in.  The MBA may not cooperate in front of the technician.
    Ciao.

  • May be answered, but can anyone confirm for sure?

    This question has had some responses so far, but can anyone confirm for sure, that with iWeb '08, you still need to publish to a folder if you are not publishing to .mac?
    What exactly is the "personal domains" feature, if publishing from within iWeb '08 is only limited to .mac accounts?

    +This question has had some responses so far, but can anyone confirm for sure, that with iWeb '08, you still need to publish to a folder if you are not publishing to .mac?+
    yes i think so!
    i think personal domains is some kind of mod_rewrite feature. it will replace the web.mac.com/username with your personal domain!
    max

  • Can anyone monitor their memory voltage?

    Can anyone out their measure their memory voltage with software? I tried the winbond monitor but the vdimm is all messed up.

    Well if you have an MSI motherboard Try there CoreCenter Software.. I think it moniters CPU Voltage and Mem Voltage.. Not completey sure but give it a try hope it helps  

  • Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

    Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
    Appreciate any quick response around this.

    Hi,
    Transaction date  will be your autoinvoice master program submission level date (If you haven't setup any logic.
    Please check the program level default date, if user enter old date ststem will pick the same.
    Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
    CAUSE
    Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
    SOLUTION
    1.Ensure that there are no scheduled workflow background process run.
    2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines"  at Responsibility level only as Yes.
    3.Now switch the responsibility to which the profile is set.
    4.Create order for Non-Shippable Lines and progress it to invoicing.
    5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
    6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

  • The numerical instructions in tutorial ? LIKE 3:10 OR 0:36 ?? can ANYONE EXPLAIN THEIR REPRESENTATION

    the numerical instructions in tutorial ? LIKE 3:10 OR 0:36 ?? can ANYONE EXPLAIN THEIR REPRESENTATION

    the numerical instructions in tutorial ? LIKE 3:10 OR 0:36 ?? can ANYONE EXPLAIN THEIR REPRESENTATION

  • Thanks for a stealth fix - can anyone confirm this actually happened?

    When the Yoga 2 Pro was released I received an error message about an unauthorized power supply when using with my energizer xpal external battery.  It was only a nuisance since the battery continued to work.  After this last power update I have not seen that message at all and my laptop continues to work well while on the external battery.  Can anyone confirm this was an undocumented fix?

    I know they fixed an error message when using other power supplies in the bios when they released the latest (11/7 I think) bios update.

Maybe you are looking for

  • Tables and fields for blocked invoices

    hi, what r the tables and fields which r required to develop a report that displays blocked invoices. thanks kishore

  • NOKIA LUMIA 520: I cannot see my call log date wis...

    Dear nokia support team and members,                             I cannot view my call log date wise. If i receive call or If I missed a call I need to scroll down to the respective call entry like a treasure hunt in the call log history.            

  • P&L A/C and Balance sheet for segment reporting

    Hi I am using the ECC 6.00, segmental reporting functions I have one requirement is that Customer wants prepare the profit and loss account and balance sheet for each segments wise,  Please help me, How to prepare the segment wise profit and loss acc

  • OSB 11.1.1.5.0 download file

    Hi, I am looking for OSB 11.1.1.5.0 download link for 64 bit AIX server. I have tried browsing oracle site but not able to find any download link for OSB 11.1.1.5.0 Version. Could you please point me to correct downloadable URL.

  • Why does my iPad not recognised with my new iMac?

    it continuously beeps as though it is being connected and disconnected. any help would be appreciated.