Can anyone confirm this?

1. Create a new file (using logics installed, default autoload)
2. Open a sizeable EXS instrument (something large enough to notice it load)
3. Save the file [Song 1, lets say]
4. Create new song (again using Logics default autoload)
5. Import only 'screensets' from File 1.
You should notice Logic loading the EXS instrument from the file you are only trying to get a screenset from.
What gives!?!? This has happened for me everytime since Logic 7.0.
G4 PowerBook 1.67, 1.5 GB
G4 DP 1.25, 1.5 GB
Logic 7.1.1
Delta 1010

this has always happened in every version of logic since the esx24. when you switch songs it reloads the audio inst samples, unless they have common samples and you have "keep comman samples in memory when switching songs".
it's a bit silly i know, i would have though that they would have figured out we only want the environment information. but since the environment information may contain esx inst with samples it dumps and reloads. furthermore and quite annoyingly, i copied across esx insts don't keep the refernces to the instruments, so you have to manually go through and load them again.
the workaround for most environment imports and generally sharing information between songs is to disable the audio driver. then it only takes a short pause to swap between songs. however, as i said if you try and copy over audio insts with instances of esx, the instruments loaded with the esx isn't remembered.
it's definitely an area that could do with looking at. unless i too am missing something drastic. (i'm pretty sure i'm not)

Similar Messages

  • It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

    It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

    lovinmymac wrote:
    I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
    You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
    Ian

  • Thanks for a stealth fix - can anyone confirm this actually happened?

    When the Yoga 2 Pro was released I received an error message about an unauthorized power supply when using with my energizer xpal external battery.  It was only a nuisance since the battery continued to work.  After this last power update I have not seen that message at all and my laptop continues to work well while on the external battery.  Can anyone confirm this was an undocumented fix?

    I know they fixed an error message when using other power supplies in the bios when they released the latest (11/7 I think) bios update.

  • Can anyone confirm this getPathInfo()= null problem???

    Hey everyone,
              I am still awaiting word from WEBSupport, but I am curious if anyone else
              can confirm this behaviour... I have created a very simple little
              TestServlet class...once it is compiled you simply need to place it in your
              servlet classpath for weblogic.
              You will need to add the following line to your weblogic.properties file:
              weblogic.httpd.register.TestServlet.jsv=TestServlet
              to run it type: http://<server_address>:7001/TestServlet.jsv
              When I run this on my 4.5.1 (SP11) Server I get the expected null problem on
              getPathInfo().
              If anyone can help me out, I am very appreciative :)
              Cheers,
              Sean Hignett
              [TestServlet.java]
              

    Is this STILL an issue? I have recently upgraded to service pack 13 of 4.5.1
              and I am still seeing null returned by this call. Will this ever be resolved
              in
              a future 4.5.1 service pack?
              Craig McElroy
              [email protected]
              Cameron Purdy wrote:
              > I believe that was a regression. I do not know if it has been fixed. I did
              > encounter it in 5.1. The spec says that null is never returned, so it is an
              > obvious bug.
              >
              > --
              >
              > Cameron Purdy
              > http://www.tangosol.com
              >
              > "Sean Hignett" <[email protected]> wrote in message
              > news:[email protected]...
              > > Hey everyone,
              > >
              > > I am still awaiting word from WEBSupport, but I am curious if anyone else
              > > can confirm this behaviour... I have created a very simple little
              > > TestServlet class...once it is compiled you simply need to place it in
              > your
              > > servlet classpath for weblogic.
              > >
              > > You will need to add the following line to your weblogic.properties file:
              > > weblogic.httpd.register.TestServlet.jsv=TestServlet
              > >
              > > to run it type: http://<server_address>:7001/TestServlet.jsv
              > >
              > > When I run this on my 4.5.1 (SP11) Server I get the expected null problem
              > on
              > > getPathInfo().
              > >
              > > If anyone can help me out, I am very appreciative :)
              > >
              > > Cheers,
              > >
              > > Sean Hignett
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              > >
              

  • Can anyone confirm this adapter works with micro sd card, can anyone confirm this adapter works with micro SD card

    hi all,
    I would appreciate if anyone could confirm whether this adapter will work with a micro SD card? I have the adapter that converts the micro SD to normal SD, so would this adapter work:
    http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit#ove rview
    thanks very much

    i have a helmet camera that records videos and i have been told my the manufacturers that this will work for that too?

  • Can anyone confirm this Slow Motion Bug

    Hi All,
    in a PAL project if I apply slow motion to a clip then that clip becomes distorted - looks like every other line from the clip has gone.
    I am using an iMac core duo, and have all latest OS and iLife patches applied.
    I cannot find a work around to this.

    Sounds about right. Discussion and fixes can be found here...
    http://www.danslagle.com/mac/iMovie/tips_tricks/6016.shtml
    Patrick

  • Can anyone confirm if this is a generic Skype # 00...

    Before I approach law enforcement agenncies and the consulate, can anyone confirm if this number is a Skype # 0085264504508
    I received a specific death threat via SMS from this number.
    Thanks

    I have figured out that the number is "a SMS gateway of Skype in Asia. If someone send a SMS from skype you probably will receive with that sender ID."

  • Can anyone confirm if FaceTime is working in Oman ?

    I have an ipad2 bought in USA and am presently in muscat, oman. Can anyone confirm if FaceTime can be used in oman on omantel wifi network ? The moment I dial a contact for FaceTime it says connecting after some time it says connection lost and I cannot do FaceTime. Please help me solve this problem, thanks

    It was working but it has been out for a couple of days

  • May be answered, but can anyone confirm for sure?

    This question has had some responses so far, but can anyone confirm for sure, that with iWeb '08, you still need to publish to a folder if you are not publishing to .mac?
    What exactly is the "personal domains" feature, if publishing from within iWeb '08 is only limited to .mac accounts?

    +This question has had some responses so far, but can anyone confirm for sure, that with iWeb '08, you still need to publish to a folder if you are not publishing to .mac?+
    yes i think so!
    i think personal domains is some kind of mod_rewrite feature. it will replace the web.mac.com/username with your personal domain!
    max

  • Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

    Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
    Appreciate any quick response around this.

    Hi,
    Transaction date  will be your autoinvoice master program submission level date (If you haven't setup any logic.
    Please check the program level default date, if user enter old date ststem will pick the same.
    Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
    CAUSE
    Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
    SOLUTION
    1.Ensure that there are no scheduled workflow background process run.
    2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines"  at Responsibility level only as Yes.
    3.Now switch the responsibility to which the profile is set.
    4.Create order for Non-Shippable Lines and progress it to invoicing.
    5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
    6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

  • Can anyone confirm their bluetooth connection to car works fine?

    I am having issues with incoming calls not displaying the phone number or contact name on my car's display.   Can anyone confirm that your S4 is able to "push" this incoming call information to your car's display over bluetooth?     Thanks!  

    Here is my story so far:
    I properly synced my new S4 to my car (2012 Prius Gen III - Package IV) and refreshed my phone book. All contacts are shown on my car's display. Out going calls work fine and I can use voice command to dial by name and all the proper details and picture of my contact show up on the screen for outgoing calls. However, if I receive an incoming call from the same exact contact, it shows up with this message "incoming call from unknown". If I later go into my call history, it shows that call with the proper phone number so I know my car is able to match the phone number with the contact. I think the issue must relate to the S4 not properly pushing the phone number or caller id to my car when it gets a new incoming call.
    Here is the strange part, my old phone (Droid X) had no problems syncing with my car and both incoming and outgoing calls would show the proper contact person on the display screen.
    I just synced my wife's iphone 5 to the car and both outgoing and incoming calls are displayed just fine.
    I just synced my co-workers Droid Razor (4.1.2) and that works fine. 
    Based on this, my assumption is there is a problem syncing with Galaxy S4 and/or perhaps the bluetooth version with 4.2.2.
    Thanks for any help.

  • Can anyone confirm Apple Stores are getting in iPads daily?

    A rep at the Apple store said they were getting in iPads almost every morning and that they do the 1st hour (8:00-9:00 a.m.) of just iPad sales. Can anyone confirm that this is true? It doesn't really matter where, but if it's necessary, Austin, Texas. Thanks for any input....

    I know that both the Raleigh and Durham stores have had some most mornings - sold out within an hour or less. They also told me that they do not know what they will have until they show up at the back door.
    The staff have been coming out just before doors open each morning to greet the line of hopefuls and hand out tickets for what they have to sell so the rest of the line need not wait around only to be out of luck.
    I'm nowhere near desperate enough for one to get up hours before work just to stand in line on the chance they'll have some, so I'll just wait.

  • Can anyone confirm 10.4.8 supports iSync for SE P990i?

    Hi everyone.
    10.4.8 Update is out. Has anyone or can anyone confirm if this OS version's iSync supports the Sony Ericsson P990i?
    Thanks and cheers

    The specific issue that stops the M600, P990 and W950 working with iSync is this:
    iSync (over Bluetooth) relies on there being something called "OBEX SyncML Client" and also (the old way) "OBEX IrMC Sync Server" in the phone. Symbian phones do not have this functionality.
    Sony Ericssons latest Symbian phones have something called m-router connectivity which is not supported by iSync currently.
    For this issue to be resolved in iSync, Apple will first have to add m-router connectivity to iSync. Then third-party manufacturers can add the Phone Plugins to iSync for individual phone models.
    There's nothing to stop Sony Ericsson or a clever third-party developer writing a separate application with m-router connectivity built-in. But as iSync is an integral part of the Mac OS, it makes sense to incorporate it into that.
    With iSync 2.3 Apple have given handset manufacturers the means to create iSync Phone Plugins for their phones. So, in theory, Sony Ericsson could include a Phone Plugin for iSync in the box with the phone at purchase, and I know that Apple and SE are working towards this.
    For Symbian phones, however, Apple first has to add the m-router support to iSync. Who knows how far along, or even if they are working on this?
    With Mac OS X 10.4.8 just being released, and 10.5 only a few months away, I wouldn't be surprised if this is a Leopard feature.

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • Can anyone explain this behavior and tell me how to fix it?

    Using NetBeans 6.5 on Windows, Glassfish v2.1
    I have a JSF application with a page that has a tab set.
    On one of the tabs I have a panel with company information.
    One of the components on the page is an InputText field with the value bound to a session bean variable.
    The tab also has an Add button.
    Here is what the JSP looks like for the input text and button components
       <h:inputText binding="#{MainPage.companyNameTF}" id="companyNameTF" readonly="#{SessionBean1.readOnlyFlag}"
       <h:commandButton action="#{MainPage.mainAddBtn_action}" disabled="#{SessionBean1.disableEdit}" id="mainAddBtn"
            style="font-family: Arial,Helvetica,sans-serif; font-size: 14px; font-weight: bold; left: 425px; top: 380px; position: absolute; width: 75px" value="Add"/>
         This is all plain vanilla stuff and I would expect that when the Add button is pushed, the session bean property would be filled with
    the value entered in the input text field.
    In the java code for the page, I have a method to process the Add button push.
    Originally, it just called a method in the session bean to check that a value was entered in the input text field by checking the bound
    session bean property.
    For some reason, that was not getting filled and I was getting either a null or empty string rather than the value in the text field.
    I added some checking in the method that processes the Add button push so I could check the values in the debugger.
    Here is a sample of that code:
        public String mainAddBtn_action() {
            String s = sb1.getCompanyName();
            s = (String)this.companyNameTF.getValue();
            s = (String)this.companyNameTF.getSubmittedValue();I check this in the debugger and NONE of the variants that I have listed have the value that was entered into the text field.
    The submittedValue is null and the others are empty strings (that is what they were initalized to).
    This is all pertty straight forward stuff and I am at a loss to explain what is happening.
    Can anyone expain this behavior, and, most important, how can I force the values to be present when the Add button is pushed.
    I have never experienced this problem before, and have no clue what is causing it.
    Thanks.

    Basically, the component bindings are just being used in plain vanilla get/set modes.
    I set them to "" when I do a clear for the fields and they are set to a value via the text field.
    No other action other than to read the values via get to insert them into the database.
    And, I always use the get/set methods rather than just setting the value directly.
    This is what is so strange about this behavior - I have created dozens of database add/update/delete pages using this same model and have not had a problem with them - even in a tab context.
    Not a clue why this one is different.
    I did notice that I had an error on the page (in IE7, you get a small triangle warning sign when something is not right).
    I figured that might be the problem - maybe buggering up the rendering process.
    I tracked that down and do not get that anymore (it had to do with the PDF display I was trying to get working a while back), but that did not resolve the problem.
    I don't think there are any tab conflicts - none of the components are shared between tabs, but I will see what happens when I move a couple of the components out of the tab context.
    I noticed that it seems to skip a cycle. Here is what I can do.
    1) Fill in text fields and add a record - works fine the first time.
    2) Clear the text fields
    3) Enter new data in the text fields and push Add
    4) I get an error saying fields are blank from my data check process.
    5) Enter new data and push Add - the record is added with the new data.
    My work around is to not enter data in step 3 and just accept the error message in step 4, then go ahead and enter the real data in step 5.
    Very ugly, but it works every time.

Maybe you are looking for