Can anyone explain Assisted GPS vs Network based f...

I just got a new E5 and was playing with some settings as well as Ovi maps. On ovi maps, I can see two figures on the bottom right corner, one is a counter for data usage and one looks like a phone signal with green and red bars. Now, I have it in offline mode so the data usage is at 0.0kb.
I wanted to know what the difference between the Assisted GPS and Network based positioning methods are. If I turn on Assisted GPS, the data counter still stays at 0.0kb, so I'm not sure if A-GPS uses data or not. Is there a way to know if A-GPS is working like the network based data counter?

http://almost-a-technocrat.blogspot.com/2010/07/gps-positioning-methods-explained.html
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance?

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance? Using iOS 10.7.5

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Can anyone explain me step by step procedure for creating badi?

hi all,,
Can anyone explain me about badi with step by step procedure with an example like trsn code mm01, xd01 etc.
And what is the significance of badi?
regs
hari

Hi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
 IF l_s_eban-estkz NE 'B'.
 CLEAR v_mtart.
 SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
 IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
 MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
 ENDIF.
 ENDIF.
 IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
 IF l_s_eban-knttp NE 'A'.
 IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
 MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
 ENDIF.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Regards
Anji

Can anyone explain in the Boundary Groups the Setting of Connection SLOW and FAST?

Hello,
we have many locations with DP´s and created Boundary Groups with the Connection FAST.
Now we have some Clients outside they are connected only with UMTS or DSL.
For DSL the connections is set to FAST and for UMTS is set to SLOW.
I must explain that i take over a configuration because i am a new employee here.
Can anyone explain me the different, in detail, of SLOW and FAST?
thank you well and with best regards.
André

Quote from here:
http://technet.microsoft.com/en-us/library/gg712679.aspx#BKMK_BoudnaryNetworkSpeed
"You can configure the network connection speed of each distribution point in a boundary group. Clients use this value when they connect to the distribution point. By default, the network connection speed is configured as
Fast, but it can also be configured as Slow. The network connection speed and the deployment configuration determine whether a client can download content from a distribution point
when the client is in an associated boundary group."
So basically, when you deploy something, this setting determines does the client download the content or not. Shown in the bellow picture:
For example, if you have a client configured inside boundary group that's 'Slow' and then you deploy something to this client, you can configure does the deployment run or not.

Can anyone explain origination/destination on the billing summary?

can anyone explain origination/destination on the billing summary?

The destination of a call made by the cell phone is where billing is based, if you are calling them.
For example, if I call my friend who has a NYC number and she is standing next to me here in GA and I have a MI number, The origination will show Podunk GA, but the destination will still show NYC.
Now if she calls me from GA, on my bill it will Destination, Incoming Call
Whether incoming or outgoing, on the bill, you, the line holder, are always the Origination. Look at the pic below and look at the calls from 8.5. my friend from NYC, visiting Hiram, when calling her shows NYC. Yet when she called me, it is Incoming Call
So basically, you never know WHERE the person on the other end actually is.
Hoped this helps

Can anyone explain steps in ASAP Methodology

Can anyone explain steps in ASAP Methodology

Hi,
What is ASAP?
ASAP: Accelerated Systems Application and Products in Data Processing
All implementation projects have the the following phases:
Scoping - What is to be implemented i.e. which submodules are to be implemented some clients may not require credit management for example. Look at the project scope document carefully it will tell you what SAP sub-modules in SAP you should be prepared for. Usually the sales people along with project manager do it.
As is - Here you understand the existing business processes of the client . Your BPOcollect all the ISO-documentation (if client is ISO certified), reports and forms at this stage and you analyse how and when the reports/forms are generated, where the data is coming from. You also do a Level -2 training for your BPO so he is made aware of all the required transactions in SAP.
Once this is over BPO can start learning with the consultants help more about SAP. This is crucial because if you miss out any transactions the BPO may forget about some of his Business processes which may come up later. It is a good practice to ask the BPO to make flow charts to explain business processes.
To-Be - Parallely you map these processes to SAP. Processes that you are not sure of as to whether they are present in SAP or not you try to do a configuration of those processes, and along with the BPO(Business process owner he is the clients employee who knows about the clients business processes probably a middle management guy, ther can more than one), BPO involvement is required as he may be able to tell you his requirements better. Once you do the business modelling you
will also be made aware of the gaps between as-is and to-be , here decisons have to be made as to wether a ABAP development/system modification is required or not and so on. Involve the BPO as much as possible and document everything it is good practice do not be lazy about it.
Business blueprint: Here the as-is and to-be and gap analysis is explained. This is the document that you will be using to do your configuration in the realization phase.
Realization phase: Here you do the configuration in the development server (there are three clients -development,quality, production). You also decide on the master data format, so that BPO can go collect the master data. You also gove ABAP specifications for forms, reports etc, system modifications etc. Unit testing: Your BPOs and a few key users sit down and test your configuration in your module only. It is good to test the BDCs that you need for uploading data at this stage so you have more realistic data and your BDCs are tested.
Integration testing:
Once all modules unit testing is over then the configuration is trasported to the Quality server, where testing for all the modules is done by BPOs and end user, this is to check if any problems are there in integration between various modules. Once all is okay from the QA server config is transported to the production server.
Go live preparation
Data uploading: The collected master data is checked and the uploaded into production server(sever and client I have used interchangeably). Now you are ready for go live i.e. users can now use the production server.
Read ASAP methodology for more details you will understand better.
ASAP methodoligy means nothing but standard process for implementation of SAP, It consists of 5 phases.
1. Project preperation - consists of identifying team members and developing strategy as how to go.
2. Business Blue print - consists of identifying the client current process, reqeirement and how SAP provides solution.
Consists of detailed documentaion
3. Realization -The purpose of this phase is to implement all the business and process requirements based on the
Business Blueprint.
4 Final Preparation - The purpose of this phase is to complete testing, end-user training,
5 Go Live and Support
All the functinal consultatns need good rapo with Abapers. right from uploading of legacy data, devoloping customised reports, BDC's, Forms etc, here functinal consultatns need to give guidence as to get the requried data for reports and all.. like the table name, fields etc
Reward If Helpfull,
Naresh

Can anyone Explain me the difference between Batch Input, Direct input met

Can anyone Explain me the difference between Batch Input Method and Direct Input Method.

hi
good
Direct input method                     Batch Input Method
1) We cannot send the fields   | 1) We can send fields as per
   according to our requirement|    requirement.
2) validations are done based
2) validations are done based
   on pre-defined function
on applications.
   modules
Batch Input Session:
- It is a sequence of transactions, which is generated when user run a particular program.
- It contains the accounting documents that are to be created. The SAP system stores these transactions until you decide to process them online.
- It does not update transaction figures until the session has been processed. Using this technique, you can transfer large amounts of data to the SAP system in a short time.
Three processing modes of executing Batch Input Session :-
(1) Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
(2) Display Errors only : You can correct faulty transactions online.   Transactions not yet executed, but without error, run in the background.
(3) Run in Background : Recommended by SAP.
thanks
mrutyun^

Can anyone explain me abt Defining Celleditor /cell exceptions?

hi all,
Can anyone send me some screen shots abt cell editor / cell exceptions ? what is it significance to my email id [email protected] can anyone explain me with an example.
regds
hari

Hi Hari,
We use Cell Editor when we have Complex query with two structure used to avoid the results getting collapsed,
It is very useful to resolve complex scenarios. For example, using it in aging analysis report which supports three different periods (aging by key date, aging as of last month and aging as of last year). For each row, the calculation is different based on key date, last month and last year.
How to document on Cell Editor(E.g),
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce496e17-0301-0010-e0b4-b8ca8b4588ac
URL for Defining Exception Cells,
http://help.sap.com/saphelp_nw04/helpdata/en/cb/89fa3a0376a51fe10000000a114084/frameset.htm
Regards,
Mani
Message was edited by:
Manikandan A

Everytime time I try to upload a document or an image, it takes for ever and ever. I get a warning saying " High CPU usage by Firefox " How do I change this ? Can anyone explain ? thanks Lazarus 3

Everytime time I try to upload a document or an image, it takes for ever and ever. I get a warning saying " High CPU usage by Firefox " How do I change this ? Can anyone explain ? thanks Lazarus 3

Here is the new troubleshooting information, if it helps.
Application Basics
Name: Firefox
Version: 24.0
User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0
Extensions
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.startup.homepage_override.buildID: 20130910160258
browser.startup.homepage_override.mstone: 24.0
extensions.lastAppVersion: 24.0
gfx.blacklist.webgl.msaa: 4
network.cookie.prefsMigrated: true
plugin.importedState: true
plugin.state.silverlight: 0
privacy.sanitize.migrateFx3Prefs: true
Graphics
Device ID: 0x 655
GPU Accelerated Windows: 1/1 OpenGL
Vendor ID: 0x10de
WebGL Renderer: NVIDIA Corporation -- NVIDIA GeForce GT 120 OpenGL Engine
windowLayerManagerRemote: false
AzureCanvasBackend: quartz
AzureContentBackend: none
AzureFallbackCanvasBackend: none
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10
Version in use: 4.10
NSS
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSSMIME
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSSSL
Expected minimum version: 3.15.1 Basic ECC
Version in use: 3.15.1 Basic ECC
NSSUTIL
Expected minimum version: 3.15.1
Version in use: 3.15.1

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

If your iPhone is locked to a wireless provider, only that wireless provider
can unlock it. Contact the wireless provider in Hong Kong to see if they
offer unlocking and if you qualify.
If your iPhone is locked to an AppleID that you do not know, return it for
a refund as it is useless. Only the person whose AppleID was used for
activation can remove the lock. There is no workaround for Activation Lock.
If neither of the above is what you are facing, provide more detail so someone
may offer a solution.

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

apple_master New Delhi, India
This solved my questionRe: Unable to Purchase
Apr 16, 2012 10:22 PM (in response to eight4seven)
This worked for someone
I had this problem for about six weeks. I was following this forum but was too unsure of what might happen to try the fixes that were suggested.
About two weeks ago I decided to delete the downloads.28.sqlitedb file (usingDiskAid(a free program), on a PC running Windows 7). The original downloads.28.sqlitedb was 936 KB. The new one that the system created is 80 Kb., and has stayed at about that size. After about four days I also deleted all the other contents of the Download folder. Ten days later and still no more problems. Downloads are much quicker, nothing greys-out (as was happening frequently before).
Everything has worked well since with no more error messages.
I am using an iPod 4G, iOS 5.1 (originally iOS 5.0). I do not have a manifest file, and as far as I know, have not had one. DiskAid can search the whole "hard drive" on the iPod.
Deleting downloads.28.sqlitedb and the contents of Downloads worked for me.

What is a redo log file? can anyone explain in simple terms

I am confused between redo log file and physical datafile can anyone explain in simple terms
Thank u
Regards,
Vijay

See Overview of Physical Database Structures

Can anyone explain what the other section section in the HDD usage description is for ? I recently used iphoto to send a mail and this "other "section inrease the usage by about 1GB....any ideas why ?

Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?

Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with,

Can anyone explain Assisted GPS vs Network based f...

Similar Messages

Maybe you are looking for