Can anyone explain cells, columns, tables in Dreamweaver?

Also, why do my pages extend horizontally too big when viewed in a browser-in other words how can I set the absolute width as I want it displayed?
Thanks in advance,
Dane Bread
Yes, that's "brain dead" backward.

Yes, that's "brain dead" backward.
Silly me. I thought it was daerB enaD....
Anyhow, if your page is table-based, then just set the width of the outermost table by selecting it and using the Property inspector.
If your page is CSS-based, then you would specify an explicit width for your page's container.

Similar Messages

HT1752 I am working on a chart in paged with 7 columns. Problem has occurred with amount of row. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

I am working on a chart in pages with 7 columns.
Problem has occurred with amount of rows. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

Try posting in the Pages forum
https://discussions.apple.com/community/iwork/pages

Can anyone explain me how to create a transparent table(z table) dynamicall

Can anyone explain me how to create a transparent table(z table) dynamically in the program.

Hi,
Look at the below link
http://www.sap-img.com/ab030.htm
Regards
Sudheer

Can anyone explain me abt Defining Celleditor /cell exceptions?

hi all,
Can anyone send me some screen shots abt cell editor / cell exceptions ? what is it significance to my email id [email protected] can anyone explain me with an example.
regds
hari

Hi Hari,
We use <b>Cell Editor</b> when we have Complex query with two structure used to avoid the results getting collapsed,
It is very useful to resolve complex scenarios. For example, using it in aging analysis report which supports three different periods (aging by key date, aging as of last month and aging as of last year). For each row, the calculation is different based on key date, last month and last year.
How to document on Cell Editor(E.g),
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce496e17-0301-0010-e0b4-b8ca8b4588ac
URL for <b>Defining Exception Cells,</b>
http://help.sap.com/saphelp_nw04/helpdata/en/cb/89fa3a0376a51fe10000000a114084/frameset.htm
Regards,
Mani
Message was edited by:
Manikandan A

Can anyone explain this query.?

Can anyone explain this query.?
select nvl(s.p_id,q.p_id),nvl(s.p_type,q.p_type),nvl(s.p_line,q.p_line),
nvl(s.sales2004,0),nvl(s.sales2005,0),nvl(q.quota2004,0),nvl(q.quota2005,0)
from sales s
full outer join quota q on(s.p_id = q.p_id and s.p_type=q.p_type and s.p_line=q.p_line)

from sales s full outer join quota qTable quota is outer joined to table sales , if there are no matching records in table quota then also the query retuns the sales record with null values for the corresponding quota record columns
NVL() has been used to handle such cases

Can anyone explain how to create this effect in Deamweaver and Fireworks?

This site was oriinally done in dreamweaver - but the shadow
effect was done
outside of Dreamweaver. When I save to html and load into
Dreamweaver it
makes no sense to me.
Can anyone explain how to create this effect in Deamweaver
and Fireworks?
http://www.fundflowsystems.com/test.php
Thanks in advance,
Joe

Thank you so much...
You is da bomb!
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes - a blank (completely blank) page.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:[email protected]...
>> Murray, one more favor if you would be so kind...
>> Do you recall how this page degraded in Safari?
>>
>>
http://www.binney.us/table-allcode.htm
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Nope. Sorry. You need a Mac.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Ken Binney"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Thanks Murray...
>>>>
>>>> Is there a way I can test for Safari on my
PC XP ?
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fails in Safari, Ken.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Ken Binney"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Here is a solution requiring NO
images.
>>>>>> The CSS and the Javascript can
easily made remote the page
>>>>>>
>>>>>> <!DOCTYPE HTML PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN"
>>>>>> "
http://www.w3.org/TR/html4/loose.dtd">
>>>>>> <html>
>>>>>> <head>
>>>>>> <title>Shadow</title>
>>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>>> charset=iso-8859-1">
>>>>>> <script
type="text/javascript">
>>>>>> var depth = 6 // in pixels
>>>>>>
>>>>>> // addLoadEvent t
>>>>>> function addLoadEvent(func) {
>>>>>> var oldonload = window.onload;
>>>>>> if (typeof window.onload !=
'function') {
>>>>>> window.onload = func;
>>>>>> } else {
>>>>>> window.onload = function() {
>>>>>> if (oldonload) {
>>>>>> oldonload();
>>>>>> }
>>>>>> func();
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> addLoadEvent(function() {
>>>>>>
>>>>>> var a = document.all ? document.all
>>>>>> document.getElementsByTagName('*');
>>>>>> for (var i = 0;i < a.length;i++)
>>>>>> if (a
.className == "shadow") {
>>>>>> for (x = 0;x < depth;x++) {
>>>>>> var newSd =
document.createElement("DIV")
>>>>>> newSd.className = "shadow2"
>>>>>> newSd.style.background = a.id
>>>>>> newSd.style.width = a
.offsetWidth + "px"
>>>>>> newSd.style.height =
a.offsetHeight + "px"
>>>>>> newSd.style.left = a
.offsetLeft + x + "px"
>>>>>> newSd.style.top = a.offsetTop +
x + "px"
>>>>>> document.body.appendChild(newSd)
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> );
>>>>>>
>>>>>> </script>
>>>>>> <style>
>>>>>> .shadow {
>>>>>> border: 1px solid silver;
>>>>>> padding: 2px;
>>>>>> font: 10pt arial;
>>>>>> position: relative;
>>>>>> display: inline;
>>>>>> background: white;
>>>>>> z-index: 100
>>>>>> }
>>>>>> .shadow2 {
>>>>>> overflow: hidden;
>>>>>> position: absolute;
>>>>>> filter: alpha(Opacity=15); /* modify
to change the shade
>>>>>> solidity/opacity, same as below */
>>>>>> opacity: 0.1; /* firefox 1.5 opacity
>>>>>> -moz-opacity: 0.2; /* mozilla
opacity */
>>>>>> -khtml-opacity: 0.1; /* opacity */
>>>>>> z-index: 10
>>>>>> }
>>>>>> </style>
>>>>>>
>>>>>> </head>
>>>>>>
>>>>>> <body>
>>>>>> <table width="800" border="0"
align="center" cellpadding="0"
>>>>>> cellspacing="0" class="shadow"
id="#000000">
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> </table>
>>>>>> </body>
>>>>>> </html>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Joe"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>
>>>>>>> This site was oriinally done in
dreamweaver - but the shadow effect
>>>>>>> was done outside of Dreamweaver.
When I save to html and load into
>>>>>>> Dreamweaver it makes no sense to
me.
>>>>>>>
>>>>>>> Can anyone explain how to create
this effect in Deamweaver and
>>>>>>> Fireworks?
>>>>>>>
>>>>>>>
http://www.fundflowsystems.com/test.php
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Can anyone explain this? ORA-01722

Hi all,
Can anyone understand this?
I have 3 database servers both running on windows 2000 advanced server, they're used by the development team. Also we have our production database.
The 3 databases are cloned from the production, so database configuration parameters are all equal. Today I've received a query from the development team to run on the production, the query is just simple like this:
SELECT *
FROM x
WHERE x.field_v = 177762522
I get this error
ORA-01722: invalid number
this is a hudge table, and the fiedl_v is a varchar2(9) type.
The worst thing is that on the others 3 databases this query returns results, except on the production.
So, can anyone explain me why does the implicit (char to number) conversion occours on the development databases , and fails on the production? What are the main reasons that can influence datatype conversion like this one?
Both databases have the 9.0.6 patch.
The 3 development BD's are totally cloned from the production.
Thanks.

William:
There is no guarantee on the order of evaluation of the predicates. Even with your isnum function, the invalid number could arise. The only safe way is to compare strings to strings as in your first example.
To make the isnum "safe", you would need something more like:
SELECT *
FROM (SELECT *
      FROM x
      WHERE isnum(x.field_v) = 'Y' and
            ROWNUM > 0)
WHERE x.field_v = 177762522;The ROWNUM > 0 predicate in the in-line view will prevent predicate pushing and guarantee that the isnum condition is evaluated first.
John

Can anyone explain what a condition type means in pricing.

Hi,
Can anyone explain what a condition type means in pricing. And how to create condition type and how it effects Pricing conditions.
As I am new to this area. Detailed explanation is highly appreciated.
Thanks a lot,
Rasheed

Hello Rasheed,
Below mentioned are the few important things related to pricing.
- You first define Condition Tables .
- Define Access Sequence and assign condition tables to it.
- Define Condition Type and assign Access Sequence to it.
- Now define Pricing Procedure and assign Condition Type to it.
- Now you define Pricing Procedure Determination using Sales Org, Distribution Channel ,Division,Document Pricing Procedure and Customer Pricing Procedure which are the key fields.
The above steps can be done in SPRO.
-Now maintain the Condition Records(for eg:For the specific material what is the cost or for a specific customer what is the cost of the specific material etc) using Txn:VK11.
- Once you maintain the Condition Records , you can reflect the same values in Condition Type in SPRO.
Hope this information is helpful for you to relate Condition Type in Pricing,
Please reward with points if this information is helpful for you.
Regards,
Shanthala.

Can anyone explain me step by step procedure for creating badi?

hi all,,
Can anyone explain me about badi with step by step procedure with an example like trsn code mm01, xd01 etc.
And what is the significance of badi?
regs
hari

Hi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
          MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Can anyone explain why all of my Spry Assets on a live website have suddenly stopped working?

Can anyone explain why all of my Spry Assets on a live website have stopped responding? I have checked that the Spry CSS and JS files are in place. Then checked the files on Dreamweavers live view and they are not working there either. It was fine a few weeks ago, it is almost as if the web browsers have stopped rending Spry, for example, the links for the collapsible panels are not even being recognised as links.
I am using 'old' spry assets on Dreamweaver CS4 (if that makes a difference). The Spry Assets used are Tabbed Panels and Collapsible Panels.
Thanks for your help.

Something has been going on, when I look at the bottom of your document (as pasted below), this is normally all at the top after the links to external style sheets.
<script src="js/jquery-1.10.2.min.js"></script>
<script src="js/lightbox-2.6.min.js"></script>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
   <script type="text/javascript" charset="utf-8" src="Menu_Photography_edgePreload.js"></script>
   <script src="SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
   <script type="text/javascript">

</script>

Can anyone explain how the LO data source flows from ECC to BI up to cubes?

Dear all,
Can anyone explain step by step (HOW THE DATA FLOWS)....By taking 2LIS_11_VAHDR from SD , starting from Activate Data source in ECC to Info Cube in BI7.0. Please this will be helpful -
Thanks for the advance answers...
Edited by: harishk.225 on Dec 23, 2011 9:56 AM

Hi Harish,
First go to RSA5 in ECC select your datasource 2LIS_11_VAHDR and activate it.
After activatin check in RSA6 whether the datasoure activated properly or not.
Then log on to BI sytem Select datasource and click on replicate.
Then Create Infocube infopackage ,Transformation, DTP ...entire flow. But dont schedule it because there is no data in SETUP Tables.For full load first we need to run statistical set up , so that data should come to SETUP Table.
Now go to ECC enter T.CODE OLI7BW to filled up the SETUP Table for datasource 2LIS_11_VAHDR.
It will ask you for Run Name etc give the run name and time limit and execute it.
If you get some error then first delete the SETUP Table by using Transaction Code LBWG.
In LBWG it will ask you for applicatiion number , give 11 i.e for sales datasourc and execute it.
Data will get deleted from SETUP Table. To check data is deleted or not in SET UP Tabe go to database table MC11VA0HDRSETUP. Always remember the name of SETUP Table will be Extract Structure followed by SETUP.
EX : If extract structure name is MC11VA0HDR then name of the SETUP Table will MC11VA0HDRSETUP.
If data gets deleted then again go to 0LI7BW and run the Statistical Setup then agan check in MC1VAOHDRSETUP table contains data or not.
Then trigger the Infopackage and DTP in BI. Above steps was for full load.
Now to Load deltas follow below steps.
First Create INIT at BI side which enable delta at ECC Side.
Then go to ECC and execute T.CODE LBWE.
LBWE is LO Cockpit Work Bench. There we have folowng functions 1.Maintan Datasource. 2.Maintain Extract Structure. 3. Job Control. 4.Delta Type 5.. Activate/deactivate.
If you want to add any new field to your datasource then to to Maintain Extract Strucutere remeber before adding or modififying datasource first we should deactivate datasource by using 5th function Activate/Deactivate.
Then select DELTA TYPE in delta type we have four types of delta. 1. Delta Queue (RSA7) 2. Queued Delta (LBWQ)
3. Unserialized (SM13) , 4. Seriaized (SM13)
If you select Delta queue then deltas drectly come to RSAT.
if you select Queued Delta deltas goes to LBWQ then you have perform V3 job by using Job Control function to move data from LBWQ to RSA7. Remeber to BI data always goes from RSA7 only.
If you select Unserealized then delta goes to SM13 again you have to perorm V3 Job to move deltas in RSA7.
Serialize update is not in used in Lo-cockpit.
There is a differerence between DELTA QUEUE , QUEUED DELTA, UNSERIALIZE UPDATE. Pls find the differences on net.
Then select your delta type and create deltas dtp in BI and start loading .
Hope this help you.
In RSA7 we have two tables delta and repeat delta, to know the functionality of this please search for the documents on net.
Regards,
Asim

Can anyone explain the functionality of FM f4ut_parameter_get_values ?

Can anyone explain the functionality of FM f4ut_parameter_get_values ?
This is used in search help to retrive values from screen.This doesnt seem to work for me

hi,
check this
F4UT_PARAMETER_VALUE_GET
Short Text
Standard search help exit for determining contents of a srch help par.
FunctionalityBy calling this module in a search help exit, you can find out the current contents of a search help parameter . To do this, you must pass the name of the parameter in PARAMETER.
You must distinguish between the parameter contents that are used in the selection process of the input help process and the parameter contents that are determined by the selection process and the user selection.
Parameter contents that are used in the selection process are default values of search help parameters, values that are included in the input help process by attaching the search help to the screen from field contents of the screen or its module pool, and possibly complex restrictions made by the user in the dialog box for restricting value. Such parameter contents can also be included in the input help process by the search help exit itself.
The contents of the specified parameter used in the selection process are stored as complex restrictions in SELOPT_TAB after the call. If exactly one value is defined by these complex restrictions (for example if the restrictions have exactly one row and if SIGN = 'I' and OPTION = 'EQ' for this row), this unique value can be found in VALUE.
Parameter contents that are determined by selection process and user selection are the parameter contents that are shown in the dialog box for displaying the hit list or returned on the screen. They are managed by the F4 processor in RECORD_TAB.
This module enables you to transfer the information about the specified parameters from RECORD_TAB to RESULTS_TAB in edited form.
Pass the name of the field of RESULTS_TAB that should contain the contents of the parameter to the function module in parameter FIELDNAME. If the row type of RESULTS_TAB is elementary, pass the value '*' in FIELDNAME. The rest of RESULTS_TAB is not changed. The values are copied row by row. By removing rows at the end or by adding intiial rows you can make sure that RESULTS_TAB has exactly as many rows as RECOD_TAB.
Example
You can find an example of the second kind of use of the module in the search help exit SAPBC_GLOBAL_F4_SFLIGHT of search help SFLIGHT.
Both types of use can be found in the search help exit SAPBC_GLOBAL_F4_SFLIGHT_MIN_FR of search help SFLIGHT_MIN_FREE .
Notes
1. Parameters OFF_RESULT and LEN_RESULT should not be used any more since there are basic problems when using UNICODE. The contents of these parameter are still analyzed when parameter FILEDNAME is initial for compatibility reasons.
2. Only the dialog box for restricting values can normally produce complex restrictions for a parameter.
3. If VALUE has the value SPACE, this means that either there are complex restrictions for the parameter or the unique contents are SPACE. SELOPT_TAB must be evaluated in order to determine which of these is the case.
4. If the search help does not have any parameter with the given name, the exception PARAMETER_UNKNOWN is triggered.
5. Only parameter contents for the search help displayed in the hit list or the EXPORT parameters of the search help are first managed in RECORD_TAB. If the specified parameter does not satisfy one of these conditions and if parameter RESULTS_TAB is specified in the call, the exception PARAMETER_UNKNOWN can also be triggered. This is not true, however, if results were already entered for the parameter with function module F4UT_PARAMETER_RESULTS_PUT or if space was reserved for the parameter in RECORD_TAB with function module F4UT_PARAMETER_ALLOCATE. The parameter therefore should only be defined if information about the parameter contents are really required.
6. The header lines of the specified parameter are also transferred from RECORD_TAB to RESULTS_TAB.
7. The other parameters of this module must be defined as the parameters of the search help exit having the same name, but they are not changed by this module.
8. RESULTS_TAB should be a standard table.
9. The contents of the specified parameter in RECORD_TAB are copied to the specified field of table RESULTS_TAB with a MOVE of the correct type. If this is not possible, the target field is assigned the initial value.
10. If RESULTS_TAB has no field with the name specified by FIELDNAME, only the number of rows of RESULTS_TAB is adjusted to those of RECORD_TAB as described.
Parameters
PARAMETER
OFF_RESULT
LEN_RESULT
FIELDNAME
VALUE
SHLP
CALLCONTROL
SHLP_TAB
RECORD_TAB
SELOPT_TAB
RESULTS_TAB
Exceptions
PARAMETER_UNKNOWN
Function Group
SF4U
if helpful reward some points.
with regards,
Suresh Aluri.

Strange Parameter behavior - can anyone explain or enlighten?

I have 27 Crystral Reports that are fed data through 27 SQL Stored Procedures. Recently my boss had me add two more parameters to all 27 Procedures and update the Crystal Reports. I went through all 27 Reports, ran the Set Datasource Location and Verify Database function in the Crystal Designer, and then tested all the reports. 24 of the 27 ran fine, but 4 of them came back with "Database Connector Error" problems. I spent two days trying to debug this problem with no luck - even though the reports Verify correctly, and Preview perfectly in the Designer, when I ran them through our .NET (WinForms) app, these 4 continued to give Database Connector Errors.
I then stumbled on a fix.... Normally every one of the 27 SQL Stored Procedures takes these parameters just as they appear here...
@ImportCompanyNm as varchar(100),
@ImportProjectNm as varchar(100),
@ImportId int,
@ImportTypeNm as varChar(100),
@ImportType int,
@FileType nvarchar(2000),
@DateTo datetime,
@DateFrom datetime,
@ImpDateTo datetime,
@ImpDateFrom datetime,
@Passphrase as varchar(20)
Once again, 24 of the 27 reports run fine with the SQL this way. Notice the final 3 parameters, @ImpDateTo and @ImpDateFrom are the 2 new parameters added, and @Passphrase has been there for a year or more. However, I was able to fix the bug by doing this in 4 of the 27 Procedures.
@ImportCompanyNm as varchar(100),
@ImportProjectNm as varchar(100),
@ImportId int,
@ImportTypeNm as varChar(100),
@ImportType int,
@FileType nvarchar(2000),
@DateTo datetime,
@DateFrom datetime,
@Passphrase as varchar(20),
@ImpDateTo datetime,
@ImpDateFrom datetime
Notice that I just moved @Passphrase, two lines up - thats it. Once I did that, the 4 problem reports run fine. NO Database Connector Error!
Can anyone explain this to me? Every single one of the other 24 reports runs just fine with the parameters as shown in the first block above - but the problem 4 will not run unless I move @Passphrase up two lines.
Why is this? I thought the order of Parameters does not matter - and why would it matter in 4 of 27 reports, but not in the 23 others???
This makes me very nervous about Crystal and what it is doing behind the scenes. Can anyone shed some light here?

Hi Bruce,
OK here goes.... And sorry if I miss anything or not clear.
In MS SQL Server 7 Microsoft had a native Client and CR used p2ssql.dll which is our native DB driver to connect to MS's native client engine. MS SQL 2000 did not support native DB connections using their client engine so CR stopped shipping p2ssql.dll and only supported connectivity through MDAC, OLE DB and ODBC clients. As you know MDAC was installed by default. MS SQL Server ( native ) now shows up in CR Database Explorer again because of this new Native client. In the back end though it's using our native crdb_ado.dll in this case.
As noted now that 2005 enhanced their client engine which is now known as the "Native SQL Server" it uses a new set of Native API's which can be used to connect in either OLE dB or ODBC mode. Because this is "new" the way our OLE DB Driver works is depending on the client we are connecting to and therefore which CR subroutines are being called. So although you are using OLE DB in the client, the low level API's being called in our driver are a new set of routines.
These are the ones responsible for indexing the Tables, Fields, Store Procedures and their Parameters. Our OLE DB driver is dynamic, meaning we query the client for connection info and other info including Store Procedure Parameters. The order they are returned in is the order CR expects them to be in, CR keeps a copy of the database structure in the RPT file. For speed we use indexing and not names, this may explain why it works if you change the order. It may be that the new parameter was added in that order or the client is ordering them before sending them to CR to use and dynamically populate the list in CR Designer. In this case it appears something is not being returned to CR or CR does not have logic to handle this type of change.
In either case I will discuss this with the Report Design team to see if anyone else has noticed this and ask them to test and if it is reproducible I'll have R&D fix this if it's our issue.
Hope this is understood and explain why?
Thanks agian
Don

Can anyone explain origination/destination on the billing summary?

can anyone explain origination/destination on the billing summary?

The destination of a call made by the cell phone is where billing is based, if you are calling them.
For example, if I call my friend who has a NYC number and she is standing next to me here in GA and I have a MI number, The origination will show Podunk GA, but the destination will still show NYC.
Now if she calls me from GA, on my bill it will Destination, Incoming Call
Whether incoming or outgoing, on the bill, you, the line holder, are always the Origination. Look at the pic below and look at the calls from 8.5. my friend from NYC, visiting Hiram, when calling her shows NYC. Yet when she called me, it is Incoming Call
So basically, you never know WHERE the person on the other end actually is.
Hoped this helps

Can anyone explain steps in ASAP Methodology

Can anyone explain steps in ASAP Methodology

Hi,
What is ASAP?
ASAP: Accelerated Systems Application and Products in Data Processing
All implementation projects have the the following phases:
Scoping - What is to be implemented i.e. which submodules are to be implemented some clients may not require credit management for example. Look at the project scope document carefully it will tell you what SAP sub-modules in SAP you should be prepared for. Usually the sales people along with project manager do it.
As is - Here you understand the existing business processes of the client . Your BPOcollect all the ISO-documentation (if client is ISO certified), reports and forms at this stage and you analyse how and when the reports/forms are generated, where the data is coming from. You also do a Level -2 training for your BPO so he is made aware of all the required transactions in SAP.
Once this is over BPO can start learning with the consultants help more about SAP. This is crucial because if you miss out any transactions the BPO may forget about some of his Business processes which may come up later. It is a good practice to ask the BPO to make flow charts to explain business processes.
To-Be - Parallely you map these processes to SAP. Processes that you are not sure of as to whether they are present in SAP or not you try to do a configuration of those processes, and along with the BPO(Business process owner he is the clients employee who knows about the clients business processes probably a middle management guy, ther can more than one), BPO involvement is required as he may be able to tell you his requirements better. Once you do the business modelling you
will also be made aware of the gaps between as-is and to-be , here decisons have to be made as to wether a ABAP development/system modification is required or not and so on. Involve the BPO as much as possible and document everything it is good practice do not be lazy about it.
Business blueprint: Here the as-is and to-be and gap analysis is explained. This is the document that you will be using to do your configuration in the realization phase.
Realization phase: Here you do the configuration in the development server (there are three clients -development,quality, production). You also decide on the master data format, so that BPO can go collect the master data. You also gove ABAP specifications for forms, reports etc, system modifications etc. Unit testing: Your BPOs and a few key users sit down and test your configuration in your module only. It is good to test the BDCs that you need for uploading data at this stage so you have more realistic data and your BDCs are tested.
Integration testing:
Once all modules unit testing is over then the configuration is trasported to the Quality server, where testing for all the modules is done by BPOs and end user, this is to check if any problems are there in integration between various modules. Once all is okay from the QA server config is transported to the production server.
Go live preparation
Data uploading: The collected master data is checked and the uploaded into production server(sever and client I have used interchangeably). Now you are ready for go live i.e. users can now use the production server.
Read ASAP methodology for more details you will understand better.
ASAP methodoligy means nothing but standard process for implementation of SAP, It consists of 5 phases.
1. Project preperation - consists of identifying team members and developing strategy as how to go.
2. Business Blue print - consists of identifying the client current process, reqeirement and how SAP provides solution.
Consists of detailed documentaion
3. Realization -The purpose of this phase is to implement all the business and process requirements based on the
Business Blueprint.
4 Final Preparation - The purpose of this phase is to complete testing, end-user training,
5 Go Live and Support
All the functinal consultatns need good rapo with Abapers. right from uploading of legacy data, devoloping customised reports, BDC's, Forms etc, here functinal consultatns need to give guidence as to get the requried data for reports and all.. like the table name, fields etc
Reward If Helpfull,
Naresh

Can anyone explain cells, columns, tables in Dreamweaver?

Similar Messages

Maybe you are looking for