Can anyone explain how this works (vlans and bridge groups)
Can someone please explain how this works...I have started to have problems but nothing changed. My problems are vlan1 and 1000 getting blocked on the switchport where the root bridge is attached.
ROOT BRIDGE:
ssid state
station-role root bridge
rts threshold 4000
concatenation
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
no snmp trap link-status
bridge-group 1
bridge-group 1 spanning-disabled
interface Dot11Radio0.911
encapsulation dot1Q 911
no ip route-cache
no snmp trap link-status
bridge-group 5
interface Dot11Radio0.1000
encapsulation dot1Q 1000
no ip route-cache
no snmp trap link-status
bridge-group 2
bridge-group 2 spanning-disabled
interface Dot11Radio0.2001
encapsulation dot1Q 2001
no ip route-cache
no snmp trap link-status
bridge-group 253
bridge-group 253 spanning-disabled
interface Dot11Radio0.2120
encapsulation dot1Q 2120
no ip route-cache
no snmp trap link-status
bridge-group 7
interface Dot11Radio0.2330
encapsulation dot1Q 2330
no ip route-cache
no snmp trap link-status
bridge-group 3
bridge-group 3 spanning-disabled
interface Dot11Radio0.2336
encapsulation dot1Q 2336
no ip route-cache
no snmp trap link-status
bridge-group 4
interface Dot11Radio0.2350
encapsulation dot1Q 2350
no ip route-cache
no snmp trap link-status
bridge-group 6
interface Dot11Radio0.2901
encapsulation dot1Q 2901
no ip route-cache
no snmp trap link-status
bridge-group 255
bridge-group 255 spanning-disabled
interface Dot11Radio0.2902
encapsulation dot1Q 2902
no ip route-cache
no snmp trap link-status
bridge-group 254
bridge-group 254 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
interface FastEthernet0.1
encapsulation dot1Q 1
no ip route-cache
no snmp trap link-status
interface FastEthernet0.911
encapsulation dot1Q 911
no ip route-cache
no snmp trap link-status
bridge-group 5
interface FastEthernet0.1000
encapsulation dot1Q 1000 native
ip address 10.0.32.10 255.255.255.0
no ip route-cache
no snmp trap link-status
bridge-group 1
interface FastEthernet0.2001
encapsulation dot1Q 2001
no ip route-cache
no snmp trap link-status
bridge-group 253
bridge-group 253 spanning-disabled
interface FastEthernet0.2120
encapsulation dot1Q 2120
no ip route-cache
no snmp trap link-status
bridge-group 7
interface FastEthernet0.2330
encapsulation dot1Q 2330
no ip route-cache
no snmp trap link-status
bridge-group 3
interface FastEthernet0.2336
encapsulation dot1Q 2336
no ip route-cache
no snmp trap link-status
bridge-group 4
interface FastEthernet0.2350
description 81 River Rd - Labor
encapsulation dot1Q 2350
no ip route-cache
no snmp trap link-status
bridge-group 6
interface FastEthernet0.2901
encapsulation dot1Q 2901
no ip route-cache
no snmp trap link-status
bridge-group 255
bridge-group 255 spanning-disabled
interface FastEthernet0.2902
encapsulation dot1Q 2902
no ip route-cache
no snmp trap link-status
bridge-group 254
bridge-group 254 spanning-disabled
interface BVI1
ip address 10.0.32.10 255.255.255.0
no ip route-cache
ip default-gateway 10.0.32.1
NON-ROOT BRIDGE#2:
ssid state
station-role non-root bridge
rts threshold 4000
concatenation
infrastructure-client
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
interface Dot11Radio0.1000
encapsulation dot1Q 1000
no ip route-cache
bridge-group 254
bridge-group 254 spanning-disabled
interface Dot11Radio0.2001
encapsulation dot1Q 2001
no ip route-cache
bridge-group 252
bridge-group 252 spanning-disabled
interface Dot11Radio0.2336
encapsulation dot1Q 2336
no ip route-cache
bridge-group 251
bridge-group 251 spanning-disabled
interface Dot11Radio0.2901
encapsulation dot1Q 2901
no ip route-cache
bridge-group 253
bridge-group 253 spanning-disabled
interface Dot11Radio0.2902
encapsulation dot1Q 2902
no ip route-cache
bridge-group 255
bridge-group 255 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
hold-queue 80 in
interface FastEthernet0.1000
encapsulation dot1Q 1000 native
no ip route-cache
bridge-group 1
interface FastEthernet0.2001
encapsulation dot1Q 2001
no ip route-cache
bridge-group 252
bridge-group 252 spanning-disabled
interface FastEthernet0.2336
encapsulation dot1Q 2336
no ip route-cache
bridge-group 251
bridge-group 251 spanning-disabled
interface FastEthernet0.2901
encapsulation dot1Q 2901
no ip route-cache
bridge-group 253
bridge-group 253 spanning-disabled
interface FastEthernet0.2902
encapsulation dot1Q 2902
no ip route-cache
bridge-group 255
bridge-group 255 spanning-disabled
interface BVI1
ip address 10.0.32.11 255.255.255.0
no ip route-cache
ip default-gateway 10.0.32.1
Similar Messages
-
EFax. Can anyone explain how this works and on what printers?
HP and eFax are rather mum on how this works. Can you set the 6500a + to save incoming faxes? What are the printers that can use this?
Hello mistercrowley,
Currently eFax is only available on the Hp Photosmart eStation e All in One Printer C510a. The OfficeJet 6500a Plus has the standard analog fax.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
(Although I am employed by HP, I am speaking for myself and not for HP) -
I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?
Have you tried reinstalling the original drive? Same symptoms with it?
-
Recently updated Numbers to Version 3.5.2 and now also seem to have Numbers Version 2.0 on my launchpad? Can anyone explain how this has happened - how do I get rid of it? Not able to move to Trash.
What is strange however is that my iMac is only a few months old and they all were upgraded to V3.x just a few months ago - with all Apps for iWork removed at that time.
Unless you did something specific to remove the old versions of the iWork apps (not advisable) then, as Wayne points out, they were not actually removed from your Mac, just moved into that subfolder within your main Applications folder.
I originally downloaded Numbers 2.x from the App Store (i.e. didn't install from a disk). I still have it on my Mac. But only Numbers 3.x appears in Launchpad.
I don't know whether this will help, but in Mac App Store you might try clicking 'Account' under 'Quick Links' on the right, signing in with your password, and clicking the 'Reset' button to the right of 'Reset all warnings for buying and downloading'. Sometimes the App Store gets a little confused. It's possible Launchpad may be taking its cue from the App Store in showing that old version of Numbers.
By Launchpad I assume you really mean Launchpad, not the Dock. I usually use the Dock. If that's what you're using too, then of course you can just drag the icon for the old Numbers off the Dock and it will vanish. (But the Numbers 2.3 application will still be there in that subfolder when you need it.)
SG -
I am trying to connect my Samsung Bluetooth device to my new Iphone 4s. Can anyone explain how this is don?
Which Samsung Bluetooth device?
Please note that the iPhone will not pair with other phones, tablets, etc for purposes of file transfer. -
IVR NAT - can someone explain how this works?
The CLI config guide, cookbook, and other things I have found do not explain exactly what is getting translated to what with regards to IVR NAT. I setup a simple scenario, and its all working but I am trying to understand how virtual domains and NAT in general is making it all work.
I setup two switches, MDS1 and MDS2. I put VSAN 10 on MDS1 with a single HOST and VSAN 20 on MDS2 with a single DISK. I made a common transit VSAN between them, VSAN 99 via FCIP. Here is my confused take on what is happening.
HOST can only communicate with DISK if it were in its own VSAN10, which its not. So a FCID is created in VSAN10 of 0x9a6e9f so it can talk to it. This is using domain 9a, which is a virtual domain, not an actual domain so when traffic is directed to it, the MDS re-writes it to 0x736ef8 which is a virtual domain fcid, then the far side mds notices it can get to that pwwn and maps it back to the real fcid in vsan 20 of 0x0900ef. Is this even close? I just want to understand how the "routing" is really working. I understand there is a topology table built, which in this case it is:
MDS1 10,99
MDS2 20,99
(I am using auto topology). Below I have outputs I captured. I had to type these in by hand as there was no way to cut/paste of of the lab I was using. I appreciate any help on this, sorry for the marathon of posts here lately.
MDS1
HOST VSAN10
MDS2
DISK VSAN20
I setup an IVRZoneset so that the HOST and the DISK could see eachother. I am using CFS and IVR NAT as well.
So it works great, the HOST can see the DISK. But I am trying to find out about the translations, here are the tables:
P26-MDS-1# show fcns database
VSAN 10:
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
0x9a6e9f N 22:6e:00:0c:50:17:26:00 (Seagate) scsi-fcp:target
0xbd0000 N 21:00:00:e0:8b:07:4c:5a (Qlogic) scsi-fcp:init
Total number of entries = 2
VSAN 99:
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
0x736ef8 N 22:6e:00:0c:50:17:26:00 (Seagate) scsi-fcp:target
0xa85c9f N 21:00:00:e0:8b:07:4c:5a (Qlogic) scsi-fcp:init
Total number of entries = 2
P26-MDS-1# show flogi data
INTERFACE VSAN FCID PORT NAME NODE NAME
fc1/5 10 0xbd0000 21:00:00:e0:8b:07:4c:5a 20:00:00:e0:8b:07:4c:5a
Total number of flogi = 1.
P26-MDS-2# show fcns database
VSAN 20:
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
0x0900ef N 22:6e:00:0c:50:17:26:00 (Seagate) scsi-fcp:target
0x385c50 N 21:00:00:e0:8b:07:4c:5a (Qlogic) scsi-fcp:init
VSAN 99:
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
0x736ef8 N 22:6e:00:0c:50:17:26:00 (Seagate) scsi-fcp:target
0xa85c9f N 21:00:00:e0:8b:07:4c:5a (Qlogic) scsi-fcp:init
P26-MDS-2# show flogi data
INTERFACE VSAN FCID PORT NAME NODE NAME
fc1/6 20 0x0900ef 22:6e:00:0c:50:17:26:00 22:6e:00:0c:50:17:26:00
Total number of flogi = 1.
P25-MDS-1# sh ivr virtual-domain
VSAN # Domains IVR Virtual Domains
10 1 154
99 2 115,168You found the correct command to view how the FCID is rewritten as the frame is transferred from 1 VSAN to another. The re-writes for data frame headers are done by the line cards at wire rate. Some control frames that contain the FCID in the payload are routed to the supervisor so that the payload can be updated with the new FCIDs as well.
- Mike -
Ok can anyone explain how to create this algorithm?
Thanks very much to Jos for helping me with my previous question, but unfortunatly I now have dif algorithm that I again cannot figure out. Here is the question:
What is the algorithm for the following?
I have three locations _,_,_
The first can have 0-2,
The second can have 0-4,
The third can have 0-3
I need to be able to generate the following list:
000
001
002
003
010
011
012
013
020
021
022
023
030
031
032
033
100
101
102
103
110
..and so on.
Can anyone explain how this can be done?Works for any length and any digit size from 0 to 9
public static void main(String[] args) {
List combinations = generateNumbers(new int[]{2, 4, 3});
System.out.println(combinations);
public static List generateNumbers(int[] limits) {
int combinations = 1;
for (int j = 0; j < limits.length; j++)
combinations *= limits[j] + 1;
List list = new ArrayList();
for (int j = 0; j < combinations; j++) {
String s = "";
int n = j;
for (int k = limits.length - 1; k >= 0; k--) {
int digit = n % limits[k];
n /= limits[k];
s = digit + s;
list.add(s);
return list;
} -
I had to rebuild a computer. When I got iTunes installed and tried to sync my iPod it said that I had reached my limit of five computers. I logged into my iTunes account and went through the process for deauthorizing all computers. It comes up with a messaging asking if I am sure I want to deauthorize all computer and I select the "Deauthorize computers" button. It never comes back with a message one way or another whether it was successful. When I get out of that screen and come back in, it still shows that I have 5 authorized computers. I can't sync my iPod. The deauthorization is not working. Can anyone explain why this is happening?
i guess no one helped? I'm having the same problem.
When i press the button to deauthorize all computers, i get an error saying 'my account can't process this at this time. please try again later' -
Can anyone explain how to create this effect in Deamweaver and Fireworks?
This site was oriinally done in dreamweaver - but the shadow
effect was done
outside of Dreamweaver. When I save to html and load into
Dreamweaver it
makes no sense to me.
Can anyone explain how to create this effect in Deamweaver
and Fireworks?
http://www.fundflowsystems.com/test.php
Thanks in advance,
JoeThank you so much...
You is da bomb!
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes - a blank (completely blank) page.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:[email protected]...
>> Murray, one more favor if you would be so kind...
>> Do you recall how this page degraded in Safari?
>>
>>
http://www.binney.us/table-allcode.htm
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> Nope. Sorry. You need a Mac.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Ken Binney"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Thanks Murray...
>>>>
>>>> Is there a way I can test for Safari on my
PC XP ?
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Fails in Safari, Ken.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Ken Binney"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Here is a solution requiring NO
images.
>>>>>> The CSS and the Javascript can
easily made remote the page
>>>>>>
>>>>>> <!DOCTYPE HTML PUBLIC
"-//W3C//DTD HTML 4.01 Transitional//EN"
>>>>>> "
http://www.w3.org/TR/html4/loose.dtd">
>>>>>> <html>
>>>>>> <head>
>>>>>> <title>Shadow</title>
>>>>>> <meta http-equiv="Content-Type"
content="text/html;
>>>>>> charset=iso-8859-1">
>>>>>> <script
type="text/javascript">
>>>>>> var depth = 6 // in pixels
>>>>>>
>>>>>> // addLoadEvent t
>>>>>> function addLoadEvent(func) {
>>>>>> var oldonload = window.onload;
>>>>>> if (typeof window.onload !=
'function') {
>>>>>> window.onload = func;
>>>>>> } else {
>>>>>> window.onload = function() {
>>>>>> if (oldonload) {
>>>>>> oldonload();
>>>>>> }
>>>>>> func();
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> addLoadEvent(function() {
>>>>>>
>>>>>> var a = document.all ? document.all
>>>>>> document.getElementsByTagName('*');
>>>>>> for (var i = 0;i < a.length;i++)
>>>>>> if (a
.className == "shadow") {
>>>>>> for (x = 0;x < depth;x++) {
>>>>>> var newSd =
document.createElement("DIV")
>>>>>> newSd.className = "shadow2"
>>>>>> newSd.style.background = a.id
>>>>>> newSd.style.width = a
.offsetWidth + "px"
>>>>>> newSd.style.height =
a.offsetHeight + "px"
>>>>>> newSd.style.left = a
.offsetLeft + x + "px"
>>>>>> newSd.style.top = a.offsetTop +
x + "px"
>>>>>> document.body.appendChild(newSd)
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> }
>>>>>> );
>>>>>>
>>>>>> </script>
>>>>>> <style>
>>>>>> .shadow {
>>>>>> border: 1px solid silver;
>>>>>> padding: 2px;
>>>>>> font: 10pt arial;
>>>>>> position: relative;
>>>>>> display: inline;
>>>>>> background: white;
>>>>>> z-index: 100
>>>>>> }
>>>>>> .shadow2 {
>>>>>> overflow: hidden;
>>>>>> position: absolute;
>>>>>> filter: alpha(Opacity=15); /* modify
to change the shade
>>>>>> solidity/opacity, same as below */
>>>>>> opacity: 0.1; /* firefox 1.5 opacity
>>>>>> -moz-opacity: 0.2; /* mozilla
opacity */
>>>>>> -khtml-opacity: 0.1; /* opacity */
>>>>>> z-index: 10
>>>>>> }
>>>>>> </style>
>>>>>>
>>>>>> </head>
>>>>>>
>>>>>> <body>
>>>>>> <table width="800" border="0"
align="center" cellpadding="0"
>>>>>> cellspacing="0" class="shadow"
id="#000000">
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> <tr>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> <td> </td>
>>>>>> </tr>
>>>>>> </table>
>>>>>> </body>
>>>>>> </html>
>>>>>>
>>>>>>
>>>>>>
>>>>>> "Joe"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>
>>>>>>> This site was oriinally done in
dreamweaver - but the shadow effect
>>>>>>> was done outside of Dreamweaver.
When I save to html and load into
>>>>>>> Dreamweaver it makes no sense to
me.
>>>>>>>
>>>>>>> Can anyone explain how to create
this effect in Deamweaver and
>>>>>>> Fireworks?
>>>>>>>
>>>>>>>
http://www.fundflowsystems.com/test.php
>>>>>>>
>>>>>>> Thanks in advance,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
> -
My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?
I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks -
Can anyone explain how to download and upload TROY ECF fonts with SAP
Can anyone explain how to download and upload TROY ECF fonts with SAP.I have downloaded ECF font from TROY wesite as TTF format. but it is not getting upload with SAP.please kindly help me on this issue..
Hi,
You can use the SE73 Transaction and upload your TTF files.
Please check the link here for more details:
http://help.sap.com/saphelp_nw70/helpdata/en/36/5b3438fd263402e10000009b38f8cf/frameset.htm
Regards,
Siddhesh -
i can get safari to go back to old setting, can anyoner explain how to, i can go to a different web address or see the 3 colors the green ,yellow, or red buttons to click out, how do i reset, and i have went to viewfull screen nothing anyone?
http/:www.apple.com/support/safari
this is not mbp, safari, or lion community -
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
-
In the latest upgrade for iMovie 10' there is no "export to QuickTime" or other way to set your preferred export settings? can anyone explain how to do this now?
Export to Quicktime file in imoie 10 is explained here:
http://help.apple.com/imovie/mac/10.0/#move6e0cb2ad
Geoff. -
Can anyone explain how SCCM 2012 applies its firewallpolicy.
Can anyone explain how SCCM 2012 applies its firewall policy?
My understanding is that it does this by altering the local policy on the client computers.
What i am seeing though is that administrators can still change these options manually.
But if i change the options locally sccm overides the option after a while and greys out the option so it can no longer be changed manually.
How do i make sure that a user cannot simply open the windows firewall settings and turn of the firewall?
Do i have to use GPO's?
And is this working as intended?You're correct ConfigMgr uses local policies to manage everything, including the limited firewall options. If you really want to manage the Windows Firewall on a more detailed level you've got to look at GPO's, as they'll provide you with a lot more options.
For an overview of the capabilities via ConfigMgr, see:
https://technet.microsoft.com/en-us/library/hh508765.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Maybe you are looking for
-
How do I use 2 computers with 1 shuffle
My son has his library on 1 computer, I have mine on another. We got my daughter a shuffle and she wants songs from both libraries. Since she took the songs from my son's first it will not work on my computer. Any hints are appreciated. Thanks EZ
-
How do I make an animated gif from 2 layers in photoshop CC
I have a Photoshop (CC) file with 2 layers, I want to make an animated gif...I can find no way of getting the layers into the timeline. There used to be a command to import layers into frames... but I cannot find it
-
I have a MacBook Pro vintage 2009. I upgraded to Yosemite and although my hard drive still has all my pictures, iPhoto will not recognize and allow them to be displayed. Thus the library is empty..........HELP
-
Converting a hex number to binary
How do you convert a hexadecimal number to the actual 1's and 0's of binary? I am using labview 6i. Also I will eventually need the binary to be a string. Thanks.
-
I'm on a new computer and i have bought a movie and alot of music but i'm on a new computer is there anyway i can get my music from my account? Even if i'm not on that computer anymore? I'm a little annoyed since i used some of my own money to buy a