Can anyone explain in detail the option: "sound enhancer"?

On what level should I put the slider (middle, maxim, disable or else)?
Whatever sounds best for you.
o the stereo sepparation will make what ? The centralpoint of the voice will be wider?
Yes. Seems to add a bit of 3D/reverb.

Similar Messages

Can anyone help me with the fuzzy sound in ITunes?

I have a new IPod and things worked fine and then suddenly I downloaded a CD in and it sounded fuzzy and scratchy like an old LP. Now all of the songs in ITunes play this way. But the CDs play just fine in any other program, so it's ITunes that's the problem.
Has anyone else encountered this and if so, can you explain (as if I were a 4-year old) how you fixed it? I manage my way around the computer OK, but don't know much technical jargon or where to find certain things.
Thanks for any help you can give me.

Uga, this is a link from Scott Patrie in the iTunes for Windows forum that I think may help resolve the poor sound issue.
Scott Patrie, "iTunes sounds funny", 07:19pm Oct 7, 2004 CDT

Can Anyone Explain Why Using the Hightest (Native) Resolution is Preferred?

I have an '06 iMac with a 20" screen, my top resolution is 1680 x 1050, but when I try using it, yes I can "fit more on the screen", but the type is tiny, tiny, tiny, (& I can't seem to figure out how to enlarge it outside of my browsers. How do people function with microscopically small type? I have been using 1280 x 800, but am now trying 1344 x 840...
The main issue I think occurs by using the lower resolution is that my message formatting, both via Mail & when posting stuff on line, ends up all skewed, sentences break off where they shouldn't etc., as if there is some default margin that is forcing all my copy to conform to, except when I'm writing it.

Modern monitors have a fixed amount of pixels, in your case, 1680x1050 pixels. If you start sending it a signal in 1280x800 pixels, the monitor itself has to scale it up to 1680x1050 pixels in order to fit it on the screen.
You can't cleanly divide 1680 by 1280, this means that the scaled up pixels won't all be the same size. Some pixels will be wider than others.
Most people (including me) find that using a non-native resolution just looks messy.
I do agree with you that the size of everything on the screen should not be coupled to the resolution you're using on that screen. This would solve a LOT of accessibility problems for people with less than perfect eyesight.
Backwards compatibility with a lot of application frameworks and other technical things I won't get in to makes doing this very difficult (it will work for some applications, but not all, especially not older applications).

Can anyone explain this (not the typical why wont it work ques!)

So my phone works. I can make calls and text and everything. I just can't sync. What's up with that? is there more to the activation process? or something?

It means the downloaded file is corrupt. You need to try again. Are you on broadband or dial-up? If the latter you can expect problems with large files coming through uncorrupted. Alternatively try downloading the file directly from Apple's download site (www.apple.com/support/downloads/.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Can anyone explain me the concept of Process Integration(XI) in detail?

Hai all,
Can anyone explain me the concept of Process Integration(XI) in detail?
Regards,
Sanjeev.

Richa,
As already explained above by another user it means that every time SOA looks for files (in this case every 10 sec) SOA should pick all the files that are atleast 2 Minutes Old. (i.e., the "Current Date Time" - "File Creation Date" >= 2 Minutes).
It has nothing to do with the size of the file, as you mentioned in your example.
e.g. File A of 2 MB requires 1.5 mins to write itself on FTP server completely, it is getting picked up in 2 mins only.
File B of 8KB required miliseconds to write itself on FTP server completely, it is getting picked up in 10 seconds.... ISSSUE?
Here the time when File A and File B arrived in the location matters.
Say the same File A and File B are copied into location (say "D:/FilesToBeRead") at 10:20:30 AM, then the poller should pick up both these files at 10:22:30 AM as you had set your minimum file age property to 2mins.
Hope this helps
Thanks,
Deepak.

Can anyone explain what the other section section in the HDD usage description is for ? I recently used iphoto to send a mail and this "other "section inrease the usage by about 1GB....any ideas why ?

Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?

Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with,

Can anyone explain the integration of sd and mm with fico

Hi all,
Can anyone explain with an scenario how fico integrates with sd and mm.
thanxs
regds
hari

the following organisation units are to be set up to integrate SD with FI.
1. Sales organisation
2. Plant
3. Storage location (under material management)
4. Shipping point
5. Distribution Channel
6. Division.
In addition u can also create sales office, sales group but it is optional.
In order to integrate, follow the following steps:
1. Assign sales organisation to co code.
2. Assign plant to company code.
3. Assign distribution channel, division to sales organisation
4. Determine sales area (it is a combination of sales organisation, distribution channel and division)
5. Assign SO - Distribution channel - Plant
6. Assign sales area to credit control area.
7. Assign shipping point to plant (under logistics execution).
After defining and assigning the organisation units, u can view the properly integrated structure under Tcode EC01.
Having created the above SD organisation units, there are only a few more to create for FI-MM integration.
1. Purchasing organisation.
2. Valuation level ( generally plant)
3. Location (optional and need to be created only when required by client)
On creating the above,
1. Assign Purchasing org to co code.
2. Assign purchasing orgn to plant
3. Assign business area to plant / valuation area ( in this state the business area against your plant).
Hope this solves your query.
Assign points if useful.

Can anyone explain the function BAPI_PROJECT_GETINFO

Hi
Can anyone explain the function BAPI_PROJECT_GETINFO.
Can anyone explain the import and export parameters of this function module.
What is the logic.
I'm getting the output as 'No data record exists'.
This is immediately required.Please help me.
Thanking you
Chandrika.

hi
good
go trhough this
Short text
Read detailed information for work breakdown structures
Functionality
You use this method to read detailed information about project definitions and the WBS elements of certain projects from the system.
Notes
Enter the project definitions and/or the WBS elements, which you want detailed information about, in the parameter PROJECT_DEFINITION or I_WBS_ELEMENT_TABLE respectively.
If you only enter project definitions, the details of all the WBS that belong to the project definitions are read including the hierarchy. If you explicitly enter WBS elements, only these are read.
Messages are returned in Return parameters. For information about the return values and their meaning, see the parameter documentation.
Parameter
PROJECT_DEFINITION
WITH_ACTIVITIES
WITH_MILESTONES
WITH_SUBTREE
E_PROJECT_DEFINITION
RETURN
I_WBS_ELEMENT_TABLE
E_WBS_ELEMENT_TABLE
E_WBS_MILESTONE_TABLE
E_WBS_HIERARCHIE_TABLE
E_ACTIVITY_TABLE
E_MESSAGE_TABLE
thanks
mrutyun^

Can anyone explain the functionality of FM f4ut_parameter_get_values ?

Can anyone explain the functionality of FM f4ut_parameter_get_values ?
This is used in search help to retrive values from screen.This doesnt seem to work for me

hi,
check this
F4UT_PARAMETER_VALUE_GET
Short Text
Standard search help exit for determining contents of a srch help par.
FunctionalityBy calling this module in a search help exit, you can find out the current contents of a search help parameter . To do this, you must pass the name of the parameter in PARAMETER.
You must distinguish between the parameter contents that are used in the selection process of the input help process and the parameter contents that are determined by the selection process and the user selection.
Parameter contents that are used in the selection process are default values of search help parameters, values that are included in the input help process by attaching the search help to the screen from field contents of the screen or its module pool, and possibly complex restrictions made by the user in the dialog box for restricting value. Such parameter contents can also be included in the input help process by the search help exit itself.
The contents of the specified parameter used in the selection process are stored as complex restrictions in SELOPT_TAB after the call. If exactly one value is defined by these complex restrictions (for example if the restrictions have exactly one row and if SIGN = 'I' and OPTION = 'EQ' for this row), this unique value can be found in VALUE.
Parameter contents that are determined by selection process and user selection are the parameter contents that are shown in the dialog box for displaying the hit list or returned on the screen. They are managed by the F4 processor in RECORD_TAB.
This module enables you to transfer the information about the specified parameters from RECORD_TAB to RESULTS_TAB in edited form.
Pass the name of the field of RESULTS_TAB that should contain the contents of the parameter to the function module in parameter FIELDNAME. If the row type of RESULTS_TAB is elementary, pass the value '*' in FIELDNAME. The rest of RESULTS_TAB is not changed. The values are copied row by row. By removing rows at the end or by adding intiial rows you can make sure that RESULTS_TAB has exactly as many rows as RECOD_TAB.
Example
You can find an example of the second kind of use of the module in the search help exit SAPBC_GLOBAL_F4_SFLIGHT of search help SFLIGHT.
Both types of use can be found in the search help exit SAPBC_GLOBAL_F4_SFLIGHT_MIN_FR of search help SFLIGHT_MIN_FREE .
Notes
1. Parameters OFF_RESULT and LEN_RESULT should not be used any more since there are basic problems when using UNICODE. The contents of these parameter are still analyzed when parameter FILEDNAME is initial for compatibility reasons.
2. Only the dialog box for restricting values can normally produce complex restrictions for a parameter.
3. If VALUE has the value SPACE, this means that either there are complex restrictions for the parameter or the unique contents are SPACE. SELOPT_TAB must be evaluated in order to determine which of these is the case.
4. If the search help does not have any parameter with the given name, the exception PARAMETER_UNKNOWN is triggered.
5. Only parameter contents for the search help displayed in the hit list or the EXPORT parameters of the search help are first managed in RECORD_TAB. If the specified parameter does not satisfy one of these conditions and if parameter RESULTS_TAB is specified in the call, the exception PARAMETER_UNKNOWN can also be triggered. This is not true, however, if results were already entered for the parameter with function module F4UT_PARAMETER_RESULTS_PUT or if space was reserved for the parameter in RECORD_TAB with function module F4UT_PARAMETER_ALLOCATE. The parameter therefore should only be defined if information about the parameter contents are really required.
6. The header lines of the specified parameter are also transferred from RECORD_TAB to RESULTS_TAB.
7. The other parameters of this module must be defined as the parameters of the search help exit having the same name, but they are not changed by this module.
8. RESULTS_TAB should be a standard table.
9. The contents of the specified parameter in RECORD_TAB are copied to the specified field of table RESULTS_TAB with a MOVE of the correct type. If this is not possible, the target field is assigned the initial value.
10. If RESULTS_TAB has no field with the name specified by FIELDNAME, only the number of rows of RESULTS_TAB is adjusted to those of RECORD_TAB as described.
Parameters
PARAMETER
OFF_RESULT
LEN_RESULT
FIELDNAME
VALUE
SHLP
CALLCONTROL
SHLP_TAB
RECORD_TAB
SELOPT_TAB
RESULTS_TAB
Exceptions
PARAMETER_UNKNOWN
Function Group
SF4U
if helpful reward some points.
with regards,
Suresh Aluri.

Can anyone explain me what is Attribute Changerun, in detail, Urgent

Can anyone explain me what is Attribute Changerun, in detail

If you assign the process type Attribute Change run to a process chain you must define a variant. With this variant you have to define the InfoObjects for which you want to activate the master data. There are four different possibilities:
     HIERARCHY: direct selection of the hierarchy which need to be activated
     INFOOBJECT: direct selection of the infoobjects which need to be activated
     LOADING: indirect selection: reference to an InfoPackage, which must be loaded before in the process chain. Combined with the meta data of these objects and the instance information the system derives the affected InfoObjects and hierarchies. If the chosen LOADING object is not in the process chain, the system automatically inserts the chosen infopackage in process chain.
     REPORTVARIANT: indirect selection: reference to a change run variant which you can define with RSDDS_AGGREGATES_MAINTAIN (SE38) or TCode RSATTR Executing the Attribute/hierarchy change run with Variant:
Instead of applying the InfoObjects or hierarachies directly to the process variant in RSPC you can create a central variant for the report RSDDS_AGGREGATES_MAINTAIN. You can assign InfoObjects and hierarchies to this report variant. This central variant could be used by several process variants in RSPC. The benefits are central maintenance, ..

When i go to my music and play a song it sounds like my headphones are blown but when i play songs on youtube they sound fine, can anyone explain this to me? please and thank you

when i go to my music and play a song it sounds like my headphones are blown but when i play songs on youtube they sound fine, can anyone explain this to me? please and thank you

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Can anyone explain me in detail about LSMW?:

Can anyone explain me in detail about LSMW?How the process of migration takes place from Non-sap to SAP in flat files?

Hi,
http://sap.niraj.tripod.com/id61.html
Pl. check this site, useful one.
Regards,
Senthilkumar SD

Can anyone explain in the Boundary Groups the Setting of Connection SLOW and FAST?

Hello,
we have many locations with DP´s and created Boundary Groups with the Connection FAST.
Now we have some Clients outside they are connected only with UMTS or DSL.
For DSL the connections is set to FAST and for UMTS is set to SLOW.
I must explain that i take over a configuration because i am a new employee here.
Can anyone explain me the different, in detail, of SLOW and FAST?
thank you well and with best regards.
André

Quote from here:
http://technet.microsoft.com/en-us/library/gg712679.aspx#BKMK_BoudnaryNetworkSpeed
"You can configure the network connection speed of each distribution point in a boundary group. Clients use this value when they connect to the distribution point. By default, the network connection speed is configured as
Fast, but it can also be configured as Slow. The network connection speed and the deployment configuration determine whether a client can download content from a distribution point
when the client is in an associated boundary group."
So basically, when you deploy something, this setting determines does the client download the content or not. Shown in the bellow picture:
For example, if you have a client configured inside boundary group that's 'Slow' and then you deploy something to this client, you can configure does the deployment run or not.

Can anyone explain me, why my iTunes 11 does not have the MiniPlayer ?!!!!

can anyone explain me, why my iTunes 11 does not have the MiniPlayer ?!!!!

which OS are you running?
iTunes11 has limited options if you are running Snow Leopard or earlier.

Can anyone explain the E_ITMLIM_REL strucure in BBP_PD_PO_GETDETAIL?

Hi ,
We have used BBP_PD_PO_GETDETAIL to read the PO details.
Can anyone explain me the fields in the exporting E_ITMLIM_REL those XXX_A and XXX_B fields and the relations?
I am not able to find any FM documention.
Thanks in advance.
Ramesh.

refer to the structure BBP_PDS_ILREL and you will get an idea.

Can anyone explain in detail the option: "sound enhancer"?

Similar Messages

Maybe you are looking for