Can anyone explain me abt Defining Celleditor /cell exceptions?

hi all,
Can anyone send me some screen shots abt cell editor / cell exceptions ? what is it significance to my email id [email protected] can anyone explain me with an example.
regds
hari

Hi Hari,
We use Cell Editor when we have Complex query with two structure used to avoid the results getting collapsed,
It is very useful to resolve complex scenarios. For example, using it in aging analysis report which supports three different periods (aging by key date, aging as of last month and aging as of last year). For each row, the calculation is different based on key date, last month and last year.
How to document on Cell Editor(E.g),
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce496e17-0301-0010-e0b4-b8ca8b4588ac
URL for Defining Exception Cells,
http://help.sap.com/saphelp_nw04/helpdata/en/cb/89fa3a0376a51fe10000000a114084/frameset.htm
Regards,
Mani
Message was edited by:
Manikandan A

Similar Messages

Can anyone explain me abt Cash inflow and outflow

Hi all,
Can anyone explain me the cummulative cash inflow and out flow available while creating an info object. with an example in realtime scenario.
thanxs in advance
hari

Hi,
Mainly inflow and outflow is using in inventory only. So take the inventory live scenario and understand the logic. Pay some passion to read the below doc. Coz it will explain the complete design of the inventory.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards,
Vivek V

Can anyone explain the difference between these 2 versions?

I don't understand why Version 2 works and Version 1 does
not. Both are on the main timeline, however Version 2 nests one
clip inside the other. They both display correctly, however
mouse-dragging only works on the Version 2. The events don't get
fired for Version 1. Can anyone explain what's up?
Version 1:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
Version 2:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.createEmptyMovieClip("man",
thisClip.getNextHighestDepth());
thisClip
.man.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
The handlers are defined as simple calls to
startDrag/stopDrag:
function image_press() {
this.startDrag(false);
trace("man press");
function image_release() {
this.stopDrag();
trace("man release");

handlers applied to a movieclip (like your thisClip.onPress
handler) is removed when that movieclip is the target of a
loadMovie() statement. when loading is complete you can assign an
onPress handler that functions as you expect. or you can use
version 2 to target the child of a movieclip and assign handlers to
the parent.

Can anyone explain what a condition type means in pricing.

Hi,
Can anyone explain what a condition type means in pricing. And how to create condition type and how it effects Pricing conditions.
As I am new to this area. Detailed explanation is highly appreciated.
Thanks a lot,
Rasheed

Hello Rasheed,
Below mentioned are the few important things related to pricing.
- You first define Condition Tables .
- Define Access Sequence and assign condition tables to it.
- Define Condition Type and assign Access Sequence to it.
- Now define Pricing Procedure and assign Condition Type to it.
- Now you define Pricing Procedure Determination using Sales Org, Distribution Channel ,Division,Document Pricing Procedure and Customer Pricing Procedure which are the key fields.
The above steps can be done in SPRO.
-Now maintain the Condition Records(for eg:For the specific material what is the cost or for a specific customer what is the cost of the specific material etc) using Txn:VK11.
- Once you maintain the Condition Records , you can reflect the same values in Condition Type in SPRO.
Hope this information is helpful for you to relate Condition Type in Pricing,
Please reward with points if this information is helpful for you.
Regards,
Shanthala.

Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?

I want to delete photos from camera roll on my iPhone to clear space to install ios7 but after importing photos to iPhoto on my macbook pro only 4 out of 339 photos taken in September landed in events, though all 339 are in Sept photo stream. It seems like on previous uploads all photos "fell" into events according to the day they were taken, as well as into photostream. I want to make sure these photos stick around permanently and do not exist only in photo stream where I imagine they will eventually be bumped from my computer (photostream). Can anyone explain why some of my photos are landing in events and others are appearing only in photo stream?

You have uploaded two different things - pHotos are in one and only one event - if you have the same photo in two different events then you have imported it twice
Please explain what you want - your initial question and yoru current comments are 180 degrees apart
You say they are not all in events
Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?
Now you say they are
All 15 pics appear in Sept 2013 PS
It sound to me like you have no problem except you imported some photos twice adn you may not understand how the automatic import form PS works - but that is not clear
you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, to select Photo Stream > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture.
The event they are imported into is MMMM YYYY PS
If you import via iTunes sync or by connecting your IOS device via USB then they are importeed into the regular event structrue as defined in your iphoto preferences - and if you imoport via two or more different methods you will ahe duplicates
LN

Can anyone explain me step by step procedure for creating badi?

hi all,,
Can anyone explain me about badi with step by step procedure with an example like trsn code mm01, xd01 etc.
And what is the significance of badi?
regs
hari

Hi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
 IF l_s_eban-estkz NE 'B'.
 CLEAR v_mtart.
 SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
 IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
 MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
 ENDIF.
 ENDIF.
 IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
 IF l_s_eban-knttp NE 'A'.
 IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
 MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
 ENDIF.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Regards
Anji

Can anyone explain the integration of sd and mm with fico

Hi all,
Can anyone explain with an scenario how fico integrates with sd and mm.
thanxs
regds
hari

the following organisation units are to be set up to integrate SD with FI.
1. Sales organisation
2. Plant
3. Storage location (under material management)
4. Shipping point
5. Distribution Channel
6. Division.
In addition u can also create sales office, sales group but it is optional.
In order to integrate, follow the following steps:
1. Assign sales organisation to co code.
2. Assign plant to company code.
3. Assign distribution channel, division to sales organisation
4. Determine sales area (it is a combination of sales organisation, distribution channel and division)
5. Assign SO - Distribution channel - Plant
6. Assign sales area to credit control area.
7. Assign shipping point to plant (under logistics execution).
After defining and assigning the organisation units, u can view the properly integrated structure under Tcode EC01.
Having created the above SD organisation units, there are only a few more to create for FI-MM integration.
1. Purchasing organisation.
2. Valuation level ( generally plant)
3. Location (optional and need to be created only when required by client)
On creating the above,
1. Assign Purchasing org to co code.
2. Assign purchasing orgn to plant
3. Assign business area to plant / valuation area ( in this state the business area against your plant).
Hope this solves your query.
Assign points if useful.

Can anyone explain me the significance of replacement path?

hi all,
Can anyone explain me replacement path
- with text variables
- with characteristics and
- with formulas.
Can anyone explain me with an example for each of those replacement path.
And i heard abt replacement path for characteristics can be done using query too. so pls do explain abt that too.
thanxs in advance
regds
hari

Hi hari,
Using Replacement Path in your Text and Formula variables, replace values held in a characteristic. The Characteristic value variables are replaced by the results of a query at run-time.
check this link , a good example with screen shots are given to calculate the difference of DATE characterictics..
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
cheers
Sunil

Can anyone explain the functionality of FM f4ut_parameter_get_values ?

Can anyone explain the functionality of FM f4ut_parameter_get_values ?
This is used in search help to retrive values from screen.This doesnt seem to work for me

hi,
check this
F4UT_PARAMETER_VALUE_GET
Short Text
Standard search help exit for determining contents of a srch help par.
FunctionalityBy calling this module in a search help exit, you can find out the current contents of a search help parameter . To do this, you must pass the name of the parameter in PARAMETER.
You must distinguish between the parameter contents that are used in the selection process of the input help process and the parameter contents that are determined by the selection process and the user selection.
Parameter contents that are used in the selection process are default values of search help parameters, values that are included in the input help process by attaching the search help to the screen from field contents of the screen or its module pool, and possibly complex restrictions made by the user in the dialog box for restricting value. Such parameter contents can also be included in the input help process by the search help exit itself.
The contents of the specified parameter used in the selection process are stored as complex restrictions in SELOPT_TAB after the call. If exactly one value is defined by these complex restrictions (for example if the restrictions have exactly one row and if SIGN = 'I' and OPTION = 'EQ' for this row), this unique value can be found in VALUE.
Parameter contents that are determined by selection process and user selection are the parameter contents that are shown in the dialog box for displaying the hit list or returned on the screen. They are managed by the F4 processor in RECORD_TAB.
This module enables you to transfer the information about the specified parameters from RECORD_TAB to RESULTS_TAB in edited form.
Pass the name of the field of RESULTS_TAB that should contain the contents of the parameter to the function module in parameter FIELDNAME. If the row type of RESULTS_TAB is elementary, pass the value '*' in FIELDNAME. The rest of RESULTS_TAB is not changed. The values are copied row by row. By removing rows at the end or by adding intiial rows you can make sure that RESULTS_TAB has exactly as many rows as RECOD_TAB.
Example
You can find an example of the second kind of use of the module in the search help exit SAPBC_GLOBAL_F4_SFLIGHT of search help SFLIGHT.
Both types of use can be found in the search help exit SAPBC_GLOBAL_F4_SFLIGHT_MIN_FR of search help SFLIGHT_MIN_FREE .
Notes
1. Parameters OFF_RESULT and LEN_RESULT should not be used any more since there are basic problems when using UNICODE. The contents of these parameter are still analyzed when parameter FILEDNAME is initial for compatibility reasons.
2. Only the dialog box for restricting values can normally produce complex restrictions for a parameter.
3. If VALUE has the value SPACE, this means that either there are complex restrictions for the parameter or the unique contents are SPACE. SELOPT_TAB must be evaluated in order to determine which of these is the case.
4. If the search help does not have any parameter with the given name, the exception PARAMETER_UNKNOWN is triggered.
5. Only parameter contents for the search help displayed in the hit list or the EXPORT parameters of the search help are first managed in RECORD_TAB. If the specified parameter does not satisfy one of these conditions and if parameter RESULTS_TAB is specified in the call, the exception PARAMETER_UNKNOWN can also be triggered. This is not true, however, if results were already entered for the parameter with function module F4UT_PARAMETER_RESULTS_PUT or if space was reserved for the parameter in RECORD_TAB with function module F4UT_PARAMETER_ALLOCATE. The parameter therefore should only be defined if information about the parameter contents are really required.
6. The header lines of the specified parameter are also transferred from RECORD_TAB to RESULTS_TAB.
7. The other parameters of this module must be defined as the parameters of the search help exit having the same name, but they are not changed by this module.
8. RESULTS_TAB should be a standard table.
9. The contents of the specified parameter in RECORD_TAB are copied to the specified field of table RESULTS_TAB with a MOVE of the correct type. If this is not possible, the target field is assigned the initial value.
10. If RESULTS_TAB has no field with the name specified by FIELDNAME, only the number of rows of RESULTS_TAB is adjusted to those of RECORD_TAB as described.
Parameters
PARAMETER
OFF_RESULT
LEN_RESULT
FIELDNAME
VALUE
SHLP
CALLCONTROL
SHLP_TAB
RECORD_TAB
SELOPT_TAB
RESULTS_TAB
Exceptions
PARAMETER_UNKNOWN
Function Group
SF4U
if helpful reward some points.
with regards,
Suresh Aluri.

Can anyone explain me what is Attribute Changerun, in detail, Urgent

Can anyone explain me what is Attribute Changerun, in detail

If you assign the process type Attribute Change run to a process chain you must define a variant. With this variant you have to define the InfoObjects for which you want to activate the master data. There are four different possibilities:
     HIERARCHY: direct selection of the hierarchy which need to be activated
     INFOOBJECT: direct selection of the infoobjects which need to be activated
     LOADING: indirect selection: reference to an InfoPackage, which must be loaded before in the process chain. Combined with the meta data of these objects and the instance information the system derives the affected InfoObjects and hierarchies. If the chosen LOADING object is not in the process chain, the system automatically inserts the chosen infopackage in process chain.
     REPORTVARIANT: indirect selection: reference to a change run variant which you can define with RSDDS_AGGREGATES_MAINTAIN (SE38) or TCode RSATTR Executing the Attribute/hierarchy change run with Variant:
Instead of applying the InfoObjects or hierarachies directly to the process variant in RSPC you can create a central variant for the report RSDDS_AGGREGATES_MAINTAIN. You can assign InfoObjects and hierarchies to this report variant. This central variant could be used by several process variants in RSPC. The benefits are central maintenance, ..

Can anyone explain to me why on god's green earth....

....Apple doesn't allow me the ability to turn off automatic downloads for TV Shows/Movies? It boggles my mind. I watch a TON of TV shows. I cut the cord a year ago and I have 12 shows that I have purchased season passes for. Every single episode gets queued up on my iPhone, my iPad, and my Mac. And they start downloading right away!! I don't even get a notification, a simple pop-up ASKING me if I would like this to happen. The only notification I get is when my iPhone is about to run out of space because GIGS AND GIGS of content is being forced onto it.
Again, BAFFLED. It seems like a no-brainer. They have options in place for music and apps, why not for TV Shows?
Is this part of Apple's assumption strategy? "Well, we just figured that once you purchase a TV show, of course you're going to want it on all of your iDevices. I mean, why wouldn't you? I honestly don't really see any reason why we should give the user a choice here."

You have uploaded two different things - pHotos are in one and only one event - if you have the same photo in two different events then you have imported it twice
Please explain what you want - your initial question and yoru current comments are 180 degrees apart
You say they are not all in events
Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?
Now you say they are
All 15 pics appear in Sept 2013 PS
It sound to me like you have no problem except you imported some photos twice adn you may not understand how the automatic import form PS works - but that is not clear
you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, to select Photo Stream > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture.
The event they are imported into is MMMM YYYY PS
If you import via iTunes sync or by connecting your IOS device via USB then they are importeed into the regular event structrue as defined in your iphoto preferences - and if you imoport via two or more different methods you will ahe duplicates
LN

Can anyone explain origination/destination on the billing summary?

can anyone explain origination/destination on the billing summary?

The destination of a call made by the cell phone is where billing is based, if you are calling them.
For example, if I call my friend who has a NYC number and she is standing next to me here in GA and I have a MI number, The origination will show Podunk GA, but the destination will still show NYC.
Now if she calls me from GA, on my bill it will Destination, Incoming Call
Whether incoming or outgoing, on the bill, you, the line holder, are always the Origination. Look at the pic below and look at the calls from 8.5. my friend from NYC, visiting Hiram, when calling her shows NYC. Yet when she called me, it is Incoming Call
So basically, you never know WHERE the person on the other end actually is.
Hoped this helps

Can anyone Explain me the difference between Batch Input, Direct input met

Can anyone Explain me the difference between Batch Input Method and Direct Input Method.

hi
good
Direct input method                     Batch Input Method
1) We cannot send the fields   | 1) We can send fields as per
   according to our requirement|    requirement.
2) validations are done based
2) validations are done based
   on pre-defined function
on applications.
   modules
Batch Input Session:
- It is a sequence of transactions, which is generated when user run a particular program.
- It contains the accounting documents that are to be created. The SAP system stores these transactions until you decide to process them online.
- It does not update transaction figures until the session has been processed. Using this technique, you can transfer large amounts of data to the SAP system in a short time.
Three processing modes of executing Batch Input Session :-
(1) Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
(2) Display Errors only : You can correct faulty transactions online.   Transactions not yet executed, but without error, run in the background.
(3) Run in Background : Recommended by SAP.
thanks
mrutyun^

Can anyone explain error: can not access a member .. with modifiers ""

Can anyone explain why this would occur:
javax.faces.FacesException: Can't instantiate class: 'com.package.MyBean'.. class com.package.MyBean : java.lang.IllegalAccessException: Class java.beans.Beans can not access a member of class com.package.MyBean with modifiers ""

also if the class is not defined as public
myClass()
public myClass()
i got this when building my custom class loader and it took me sometime to figure this out since my editor generates my class templates I didn't even think to check something as basic as not having a public class - hopefully this saves someone else some trouble

Can anyone explain A2A & B2B AND BPM & ccBPM with an example..

Hi All..
Can anyone explain me A2A & B2B
and BPM & ccBPM with an example....
NOTE: i dont need definitions but examples..
i am bit confused with this stuff....
Thanks in advance....
Cheers,
raghavesh

Hi ,
A2A & B2B
This thread explains you the difference between A2A and B2B.
Re: A2A Vs B2B
BPM & ccBPM both are same....
BPM is used to implement work-flow spanning across multiple application system against embedding the parts of work-flow in application system. Apart from this it also help achive other scenarios like, bridging synch and asynch systems, alert mechanism, multi mapping etc. Check the BPM overview document in SDN download section.
Check out the use cases discussed at http://help.sap.com/saphelp_nw04s/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
BPM is mainly used in senarios where extra functionalities are to be done with the source message which cannot be done using the normal mapping and user-defined functions, like
-->Collecting of messages till a certain count or for a specific criteria.
-->Merging messages
-->Spliting messages
-->Processing of error files and sending to specific location and sending alerts.
-->Parallel processing of two criterias at the same time can also be done using BPM.
some weblogs on BPM...
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Sekhar

Can anyone explain me abt Defining Celleditor /cell exceptions?

Similar Messages

Maybe you are looking for