Can anyone explain me in detail about LSMW?:

Can anyone explain me in detail about LSMW?How the process of migration takes place from Non-sap to SAP in flat files?

Hi,
http://sap.niraj.tripod.com/id61.html
Pl. check this site, useful one.
Regards,
Senthilkumar SD

Similar Messages

Can anybody explain in more detail about NO-DISPLAY in selection screens..

an anybody explain in more detail about NO-DISPLAY in selection screens.. in that it is saying
"If you want to display a parameter only in certain cases, for example, depending on the values entered by the user in other input fields of the selection screen, you cannot use the NO- DISPLAY addition. If you use NO-DISPLAY, the parameter actually is an element of the interface for program calls, but not an element of the selection screen. As a result, you cannot make it visible using the MODIFY SCREEN statement. To hide a parameter that is an element of the selection screen, you must declare it without the NO-DISPLAY addition and suppress its display using the MODIFY SCREEN statement."
what is the meaning of this?

This is use a lot in programs which are submitted using the SUBMIT statement. Say that you have a program which runs as usally with a selection screen and nornal output, but you also have some logic built in there that needs to be execute when this program is not ran by the user with the selection screen, but submitted. You can use a PARMETER statement the selection screen and NO-DISPLAY to hide it when normal processing by the user. You could pass a value to the parameter when it is called via the SUBMIT statement. Does this make sense?
Regards,
Rich Heilman

Can anybody explain all the details about idoc like configuration settings etc..

Hi all can anybody explain the idoc configuration settings, communication channels sender and receiver settings

Hi,
Common steps in both Sender and Receiver:
Create logical system and assign to client
Create RFC Destinations in SM59
Create RFC Ports in WE21
Steps in Sender
Create table in SE11 and insert data
Create Segments in Tcode WE31.Define the table fields in segment
Create basic IDOC type in WE30.Specify the above created segment name,save and release the IDOC
Create message type in WE81
Assign message type to IDOC type in WE82 and release
Create partner profile in BD64,add the message type ,specify sender,receiver,message type and generate partner profile and execute.Distribute the model view
Check the partner profile in WE20
Develop a report in SE38 with code that transfers the data from source to destination
Execute the report and specify the fields to be transferred
Check the control records in WE02
Steps in Receiver:
Create an update function module in SE37
Assign the function module to logical message
Define input method in Tcode BD51
Create process code in WE42
Generate partner profile in BD64
After executing the report in sender system check in the destination system table wheather the fields are transferred
In this case a custom table has been created in sender and receiver with same structure.We can even transfer the standard table fields by using idocs
Thanks & Regards,
Sravanthi Polu

Can anyone explain this in details

Hi ABAPers,
I got new object and the description of the boject is as follows,
Modify program ZPTFU_ATRION_TAB_UPDATE to include editing table ZPTF_ATRION_DATA. There are situations where an invalid external material group gets applied to the table. We would like the ability to delete the line by choosing the option from this transaction.
Now i will tell u what i can get from this,
We were Updating the material and bom outbound status on the ZPTF_ATRION_DATA table, using the above said program.
but the above descriptions says that some invalid external material groups getting updated to this table while executing the program.
So how can we identify this invalid external material groups and what r the steps to be taken to delete that invalid external material groups from this table.
main table for this external material groups is TWEW-EXTWG
So, can any one help me in this issue.
Thanks in advance.
Regards,
Ramana Prasad.

Hi
You need to validate the material groups of the table ZPTF_ATRION_DATA against table TWEW. And,
delete all the records which fail this validation.
Regards,
Raj

Can anyone explain about complex scenerio's while desinging Reports & Universes

Post Author: [email protected]
CA Forum: Desktop Intelligence Reporting
Hi all,
can anyone explain about complex scenerio's while desinging Reports & Universes.
if possible explain with examples.
Thanks & Regards,
Madhu.

Hi Etteloc,
Welcome to the community and thanks for posting!
I'm sorry that your Mum's telephone service has developed a fault and also for the length of time this has taken to sort out. I completely understand the circumstances and how vital it is for her to have a working telephone service.
No need to worry as I can get things sorted from here. Click on my username and under the section "about me" you'll see the link to get in touch with us. Please include the link to this thread when you complete the form.
Once completed, post back with something along the lines of "details sent" (without pasting the reference number) and I'll arrange for it to be picked up as soon as possible.
Thanks a million,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Can anyone explain what the other section section in the HDD usage description is for ? I recently used iphoto to send a mail and this "other "section inrease the usage by about 1GB....any ideas why ?

Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?

Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with,

Can anyone Explain about Data conversion for Material master In SAP MM

Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
Thanks

Hi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc]

Hi Folks, Can anyone explain me about below outputs

Hi Folks, Can anyone explain me about below outputs
sh processes cpu-hog
Process:      ssm4ge_cfg_poll_thread, NUMHOG: 7, MAXHOG: 4100, LASTHOG: 790
LASTHOG At:   15:21:47 UTC Apr 20 2013
PC:           10ee46b
Traceback:    1101e6d 1102227 10eeb8d c7fb5b c9301e c8d7c5 c91486
              c93e55 c7f89a 11509f
Process:      fover_FSM_thread, NUMHOG: 1, MAXHOG: 325, LASTHOG: 330
LASTHOG At:   15:21:51 UTC Apr 20 2013
PC:           10ee46b
Traceback:    1101d4a 110247f 10eec1f c7fb08 c92fee c8d735 c8d87a
              c8fdad c92c29 c931a4 c78c03 c7e166 ad7440 671bc1

Hello Ashish,
Each process on the ASA should take the CPU for a period of time (while its being processed by the ASA).
When a process does not release the CPU is when a CPU Hog is triggered,
In this case you can see 2 proceses that hold the CPU longer than they should ( you should see a cpu hog threshold value)
In this case the first process has holded the CPU for 7 times ( the longest time being 4100 miliseconds)
Remember to rate all of the helpful posts.
For this community that's as important as a thanks

Can anyone explain me the concept of Process Integration(XI) in detail?

Hai all,
Can anyone explain me the concept of Process Integration(XI) in detail?
Regards,
Sanjeev.

Richa,
As already explained above by another user it means that every time SOA looks for files (in this case every 10 sec) SOA should pick all the files that are atleast 2 Minutes Old. (i.e., the "Current Date Time" - "File Creation Date" >= 2 Minutes).
It has nothing to do with the size of the file, as you mentioned in your example.
e.g. File A of 2 MB requires 1.5 mins to write itself on FTP server completely, it is getting picked up in 2 mins only.
File B of 8KB required miliseconds to write itself on FTP server completely, it is getting picked up in 10 seconds.... ISSSUE?
Here the time when File A and File B arrived in the location matters.
Say the same File A and File B are copied into location (say "D:/FilesToBeRead") at 10:20:30 AM, then the poller should pick up both these files at 10:22:30 AM as you had set your minimum file age property to 2mins.
Hope this helps
Thanks,
Deepak.

Can anyone explain me what is Attribute Changerun, in detail, Urgent

Can anyone explain me what is Attribute Changerun, in detail

If you assign the process type Attribute Change run to a process chain you must define a variant. With this variant you have to define the InfoObjects for which you want to activate the master data. There are four different possibilities:
     HIERARCHY: direct selection of the hierarchy which need to be activated
     INFOOBJECT: direct selection of the infoobjects which need to be activated
     LOADING: indirect selection: reference to an InfoPackage, which must be loaded before in the process chain. Combined with the meta data of these objects and the instance information the system derives the affected InfoObjects and hierarchies. If the chosen LOADING object is not in the process chain, the system automatically inserts the chosen infopackage in process chain.
     REPORTVARIANT: indirect selection: reference to a change run variant which you can define with RSDDS_AGGREGATES_MAINTAIN (SE38) or TCode RSATTR Executing the Attribute/hierarchy change run with Variant:
Instead of applying the InfoObjects or hierarachies directly to the process variant in RSPC you can create a central variant for the report RSDDS_AGGREGATES_MAINTAIN. You can assign InfoObjects and hierarchies to this report variant. This central variant could be used by several process variants in RSPC. The benefits are central maintenance, ..

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why?

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why? Otherwise, the desktop runs fine.
The battery is new, and I zapped the little button on the main board once. I've noticed that the power supply plug is a little longer than the usual one for G4, and the AGP slot has an extra slot, which is black and about half inch long.

Hi Ursula,
the AGP slot has an extra slot, which is black and about half inch long.
I believe that is for ADC Monitor power if you had one, or a card with ADC, like the little tab on this one...
I think your startup problem is bad capacitors in the power supply or on the logic board, and the need to bleed off their charge before they work right to start.

Can anyone explain in detail the option: "sound enhancer"?

Can anyone explain in detail the option: "sound enhancer"?

On what level should I put the slider (middle, maxim, disable or else)?
Whatever sounds best for you.
o the stereo sepparation will make what ? The centralpoint of the voice will be wider?
Yes. Seems to add a bit of 3D/reverb.

Can anyone explain about "Stub day", "Stub Amout" in Leasing (OKL)?

Can anyone explain about "Stub day", "Stub Amout" in Leasing (OKL)? I don't understand "Stub day", "Stub Amout"

They both used to change payment date.
STUB_DAYS : Number of days offset from the contract start date or previous payment line.
STUB_AMOUNT : Amount of rent to cover the Stub Days
Information is stored in OKL_CASH_FLOW_LEVELS
Hopefully this answers.
Regards,
Bilal Sarioz

Can anyone explain the function BAPI_PROJECT_GETINFO

Hi
Can anyone explain the function BAPI_PROJECT_GETINFO.
Can anyone explain the import and export parameters of this function module.
What is the logic.
I'm getting the output as 'No data record exists'.
This is immediately required.Please help me.
Thanking you
Chandrika.

hi
good
go trhough this
Short text
Read detailed information for work breakdown structures
Functionality
You use this method to read detailed information about project definitions and the WBS elements of certain projects from the system.
Notes
Enter the project definitions and/or the WBS elements, which you want detailed information about, in the parameter PROJECT_DEFINITION or I_WBS_ELEMENT_TABLE respectively.
If you only enter project definitions, the details of all the WBS that belong to the project definitions are read including the hierarchy. If you explicitly enter WBS elements, only these are read.
Messages are returned in Return parameters. For information about the return values and their meaning, see the parameter documentation.
Parameter
PROJECT_DEFINITION
WITH_ACTIVITIES
WITH_MILESTONES
WITH_SUBTREE
E_PROJECT_DEFINITION
RETURN
I_WBS_ELEMENT_TABLE
E_WBS_ELEMENT_TABLE
E_WBS_MILESTONE_TABLE
E_WBS_HIERARCHIE_TABLE
E_ACTIVITY_TABLE
E_MESSAGE_TABLE
thanks
mrutyun^

Can anyone explain steps in ASAP Methodology

Can anyone explain steps in ASAP Methodology

Hi,
What is ASAP?
ASAP: Accelerated Systems Application and Products in Data Processing
All implementation projects have the the following phases:
Scoping - What is to be implemented i.e. which submodules are to be implemented some clients may not require credit management for example. Look at the project scope document carefully it will tell you what SAP sub-modules in SAP you should be prepared for. Usually the sales people along with project manager do it.
As is - Here you understand the existing business processes of the client . Your BPOcollect all the ISO-documentation (if client is ISO certified), reports and forms at this stage and you analyse how and when the reports/forms are generated, where the data is coming from. You also do a Level -2 training for your BPO so he is made aware of all the required transactions in SAP.
Once this is over BPO can start learning with the consultants help more about SAP. This is crucial because if you miss out any transactions the BPO may forget about some of his Business processes which may come up later. It is a good practice to ask the BPO to make flow charts to explain business processes.
To-Be - Parallely you map these processes to SAP. Processes that you are not sure of as to whether they are present in SAP or not you try to do a configuration of those processes, and along with the BPO(Business process owner he is the clients employee who knows about the clients business processes probably a middle management guy, ther can more than one), BPO involvement is required as he may be able to tell you his requirements better. Once you do the business modelling you
will also be made aware of the gaps between as-is and to-be , here decisons have to be made as to wether a ABAP development/system modification is required or not and so on. Involve the BPO as much as possible and document everything it is good practice do not be lazy about it.
Business blueprint: Here the as-is and to-be and gap analysis is explained. This is the document that you will be using to do your configuration in the realization phase.
Realization phase: Here you do the configuration in the development server (there are three clients -development,quality, production). You also decide on the master data format, so that BPO can go collect the master data. You also gove ABAP specifications for forms, reports etc, system modifications etc. Unit testing: Your BPOs and a few key users sit down and test your configuration in your module only. It is good to test the BDCs that you need for uploading data at this stage so you have more realistic data and your BDCs are tested.
Integration testing:
Once all modules unit testing is over then the configuration is trasported to the Quality server, where testing for all the modules is done by BPOs and end user, this is to check if any problems are there in integration between various modules. Once all is okay from the QA server config is transported to the production server.
Go live preparation
Data uploading: The collected master data is checked and the uploaded into production server(sever and client I have used interchangeably). Now you are ready for go live i.e. users can now use the production server.
Read ASAP methodology for more details you will understand better.
ASAP methodoligy means nothing but standard process for implementation of SAP, It consists of 5 phases.
1. Project preperation - consists of identifying team members and developing strategy as how to go.
2. Business Blue print - consists of identifying the client current process, reqeirement and how SAP provides solution.
Consists of detailed documentaion
3. Realization -The purpose of this phase is to implement all the business and process requirements based on the
Business Blueprint.
4 Final Preparation - The purpose of this phase is to complete testing, end-user training,
5 Go Live and Support
All the functinal consultatns need good rapo with Abapers. right from uploading of legacy data, devoloping customised reports, BDC's, Forms etc, here functinal consultatns need to give guidence as to get the requried data for reports and all.. like the table name, fields etc
Reward If Helpfull,
Naresh

Can anyone explain me in detail about LSMW?:

Similar Messages

Maybe you are looking for