Can anyone explain me the concept of Process Integration(XI) in detail?
Hai all,
Can anyone explain me the concept of Process Integration(XI) in detail?
Regards,
Sanjeev.
Richa,
As already explained above by another user it means that every time SOA looks for files (in this case every 10 sec) SOA should pick all the files that are atleast 2 Minutes Old. (i.e., the "Current Date Time" - "File Creation Date" >= 2 Minutes).
It has nothing to do with the size of the file, as you mentioned in your example.
e.g. File A of 2 MB requires 1.5 mins to write itself on FTP server completely, it is getting picked up in 2 mins only.
File B of 8KB required miliseconds to write itself on FTP server completely, it is getting picked up in 10 seconds.... ISSSUE?
Here the time when File A and File B arrived in the location matters.
Say the same File A and File B are copied into location (say "D:/FilesToBeRead") at 10:20:30 AM, then the poller should pick up both these files at 10:22:30 AM as you had set your minimum file age property to 2mins.
Hope this helps
Thanks,
Deepak.
Similar Messages
-
Can anyone Explain me the difference between Batch Input, Direct input met
Can anyone Explain me the difference between Batch Input Method and Direct Input Method.
hi
good
Direct input method Batch Input Method
1) We cannot send the fields | 1) We can send fields as per
according to our requirement| requirement.
2) validations are done based
2) validations are done based
on pre-defined function
on applications.
modules
Batch Input Session:
- It is a sequence of transactions, which is generated when user run a particular program.
- It contains the accounting documents that are to be created. The SAP system stores these transactions until you decide to process them online.
- It does not update transaction figures until the session has been processed. Using this technique, you can transfer large amounts of data to the SAP system in a short time.
Three processing modes of executing Batch Input Session :-
(1) Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
(2) Display Errors only : You can correct faulty transactions online. Transactions not yet executed, but without error, run in the background.
(3) Run in Background : Recommended by SAP.
thanks
mrutyun^ -
Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with, -
Can anyone explain what the 'other' storage consists of and how I can decrease the size please?
Welcome to Apple Support Communities
"Other" refers to OS X files, caches, downloads, documents. See Other in this website > http://pondini.org/OSX/LionStorage.html
I would not worry about Other because they contain files that you need, but if you want to decrease the size, start deleting downloads and documents -
Can anyone explain me the lovrelation function
Hi to all,
Can anyone explain me the lovrelation function. I tried this but i got an error "The LOV relation that you are trying to add is invalid."
This is lov relation code,
lov.addLovRelations(pagecontext, " ", // base pageitem
" ", //lov item
LOV_CRITERIA, //direction
LOV_REQUIRED_NO )
in this method what is base page item and lov item?
I think i made mistake on this so that i got error (i guess)
Anyone know plz explain me. Its Urgent.
Thanks in Advance
SenthurUse this method....
addLovRelations(OAPageContext pageContext,
String baseItemName,
String lovItemName,
String direction,
String required
May be it is useful for you....
pageContext - application context for the current page and browser request
baseItemName - ID of the item in the base page that takes part in the new LOV map
lovItemName - ID of the item in the LOV Region that is mapped to the corresponding baseItemName for this LOV map
direction - relation between the baseItemName and the lovItemName. Can take one of the three values:
LOV_CRITERIA - from base page to LOV Region. Managed by OA Framework.
LOV_PASSIVE_CRITERIA - from base page to LOV Region programmatically. Managed from the LOV Controller.
LOV_RESULT - from LOV Region to base page
required - LOV_REQUIRED_YES or LOV_REQUIRED_NO. If LOV_REQUIRED_YES, the baseItemName is a mandatory criteria and should contain a non-empty value when direction is LOV_CRITERIA or LOV_PASSIVE_CRITERIA. Does not apply when direction is LOV_RESULT.
Thanks
Anoop -
Can anyone explain me the following terms.....
Hi all,
Can anyone explain me the following terms in WM
1. WareHouse
2. Storage Bin
3. Storage Location
4. Storage Unit.
5. Handling Units(External/Internal)
ThanksHi Kripa,
1. What is Netweaver ?
Click Here: <a href="http://www.thespot4sap.com/Articles/SAP_Netweaver_Introduction.asp">Netweaver: An Introduction</a>
<a href="http://www.sap.com/platform/netweaver/index.epx">http://www.sap.com/platform/netweaver/index.epx</a>
2. What is the difference bet NW 2004 and NW2004s?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/devguide2004">SAP NetWeaver 2004 Edition</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/devguide2004s">SAP NetWeaver 2004s Edition</a>
3. Is it mandatory to know JAVA language to sustain with NW technologies? or ABAP itself is enough ?
Its all depend in which stack you want to fit. If you want to go into EP, then JAVA is must. In XI having knowledge of JAVA will be highly useful and in other Netweaver stack it will be an added advantage. Anyhow ABAP is not enough to sustain with NW technologies.
<a href="http://www.sap.com/platform/netweaver/standardssupport/java.epx">Netweaver and JAVA</a>
4. If JAVA is essential ...where to start with ?
Core JAVA, J2EE in full is needed for Netweaver. As where to start is concern you can start with core JAVA and consequencely go thorugh J2EE.
I hope this will help you out.
Regards,
Subhasha Ranjan -
Can anyone explain in the Boundary Groups the Setting of Connection SLOW and FAST?
Hello,
we have many locations with DP´s and created Boundary Groups with the Connection FAST.
Now we have some Clients outside they are connected only with UMTS or DSL.
For DSL the connections is set to FAST and for UMTS is set to SLOW.
I must explain that i take over a configuration because i am a new employee here.
Can anyone explain me the different, in detail, of SLOW and FAST?
thank you well and with best regards.
AndréQuote from here:
http://technet.microsoft.com/en-us/library/gg712679.aspx#BKMK_BoudnaryNetworkSpeed
"You can configure the network connection speed of each distribution point in a boundary group. Clients use this value when they connect to the distribution point. By default, the network connection speed is configured as
Fast, but it can also be configured as Slow. The network connection speed and the deployment configuration determine whether a client can download content from a distribution point
when the client is in an associated boundary group."
So basically, when you deploy something, this setting determines does the client download the content or not. Shown in the bellow picture:
For example, if you have a client configured inside boundary group that's 'Slow' and then you deploy something to this client, you can configure does the deployment run or not. -
Can anyone explain me the procedure and initial settings to do sto for schedule lines?
can anyone explain me the procedure and initial settings to do sto for schedule lines?
Create a STO with new doc type for material M1 to ship from plant 1 to plant 2 with qty as 100. On pressing enter you should be able to see schedule lines in delivery schedule tab. In schedule line you should see the Material availability date, GI date, loading date etc.
can anyone give the answer for this question..Hi Megha,
Please find below links for Config STO with schedule lines.
http://dhavalatsap.blogspot.sg/p/configuration-of-plant-to-plant-sto.html
https://scn.sap.com/thread/1260375
Thanks,
Bala. -
Can anyone explain me the SAP BPC?
Can anyone explain me the SAP BPC?
Hi,
SAP BPC STands For sap business planning and consolidation.
Please go through th link below where u have curriculum for the same:
http://www.sap.com/services/education/curriculum.epx?context=%5B%5BCPM%5D%5D%7C.
Hope it helps.
Regards,
Rahul -
Can anyone explain me the significance of replacement path?
hi all,
Can anyone explain me replacement path
- with text variables
- with characteristics and
- with formulas.
Can anyone explain me with an example for each of those replacement path.
And i heard abt replacement path for characteristics can be done using query too. so pls do explain abt that too.
thanxs in advance
regds
hariHi hari,
Using Replacement Path in your Text and Formula variables, replace values held in a characteristic. The Characteristic value variables are replaced by the results of a query at run-time.
check this link , a good example with screen shots are given to calculate the difference of DATE characterictics..
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
cheers
Sunil -
Can anyone explain how the LO data source flows from ECC to BI up to cubes?
Dear all,
Can anyone explain step by step (HOW THE DATA FLOWS)....By taking 2LIS_11_VAHDR from SD , starting from Activate Data source in ECC to Info Cube in BI7.0. Please this will be helpful -
Thanks for the advance answers...
Edited by: harishk.225 on Dec 23, 2011 9:56 AMHi Harish,
First go to RSA5 in ECC select your datasource 2LIS_11_VAHDR and activate it.
After activatin check in RSA6 whether the datasoure activated properly or not.
Then log on to BI sytem Select datasource and click on replicate.
Then Create Infocube infopackage ,Transformation, DTP ...entire flow. But dont schedule it because there is no data in SETUP Tables.For full load first we need to run statistical set up , so that data should come to SETUP Table.
Now go to ECC enter T.CODE OLI7BW to filled up the SETUP Table for datasource 2LIS_11_VAHDR.
It will ask you for Run Name etc give the run name and time limit and execute it.
If you get some error then first delete the SETUP Table by using Transaction Code LBWG.
In LBWG it will ask you for applicatiion number , give 11 i.e for sales datasourc and execute it.
Data will get deleted from SETUP Table. To check data is deleted or not in SET UP Tabe go to database table MC11VA0HDRSETUP. Always remember the name of SETUP Table will be Extract Structure followed by SETUP.
EX : If extract structure name is MC11VA0HDR then name of the SETUP Table will MC11VA0HDRSETUP.
If data gets deleted then again go to 0LI7BW and run the Statistical Setup then agan check in MC1VAOHDRSETUP table contains data or not.
Then trigger the Infopackage and DTP in BI. Above steps was for full load.
Now to Load deltas follow below steps.
First Create INIT at BI side which enable delta at ECC Side.
Then go to ECC and execute T.CODE LBWE.
LBWE is LO Cockpit Work Bench. There we have folowng functions 1.Maintan Datasource. 2.Maintain Extract Structure. 3. Job Control. 4.Delta Type 5.. Activate/deactivate.
If you want to add any new field to your datasource then to to Maintain Extract Strucutere remeber before adding or modififying datasource first we should deactivate datasource by using 5th function Activate/Deactivate.
Then select DELTA TYPE in delta type we have four types of delta. 1. Delta Queue (RSA7) 2. Queued Delta (LBWQ)
3. Unserialized (SM13) , 4. Seriaized (SM13)
If you select Delta queue then deltas drectly come to RSAT.
if you select Queued Delta deltas goes to LBWQ then you have perform V3 job by using Job Control function to move data from LBWQ to RSA7. Remeber to BI data always goes from RSA7 only.
If you select Unserealized then delta goes to SM13 again you have to perorm V3 Job to move deltas in RSA7.
Serialize update is not in used in Lo-cockpit.
There is a differerence between DELTA QUEUE , QUEUED DELTA, UNSERIALIZE UPDATE. Pls find the differences on net.
Then select your delta type and create deltas dtp in BI and start loading .
Hope this help you.
In RSA7 we have two tables delta and repeat delta, to know the functionality of this please search for the documents on net.
Regards,
Asim -
Can anyone explain what the field-get command in ABAP does
Hi,
I have just come across the command field-get in some code. I've never seen this command before and there doesn't seem to be any help or documentation on this.
Can anyone advise how this command works?
Thanks,
RubyIgnore question.
-
Whilst I'm at work I can't seem to connect to the internet, despite the home screen telling me I have a 3G connection. I can't get anything to refresh at all, until I go home and my phone auto connects to the WIFI and then I get all my emails and app notifications come through in a flood.
All other aspects of my phone working fine.
Can anyone help?
ThanksCheck to see if you have cellular data enabled for mail.
Go to Settings > Cellular and check the apps under "USE CELLULAR DATA FOR:" -
Can anyone explain what the Samsung Galaxy 3 update was today?
My Galaxy 3 updated today, and it says to go to verizon site for help, but I cannot find any info on what the update was for. Can anyone help?
Hi Strebing, I like to help you to our website link that deals with the software update for the Samsung Galaxy 3. Use the following link to be taken to the instructions for obtaining the update and benefits the update provides. The link is http://bit.ly/OVsSai.
Thanks,
EdW_VZW
Follow us on Twitter @VZWSupport -
Hi Can anyone explain how the abaper's first day will be in office
Hi all,
Thank you very much to all of you ..
I have got a job in Texas..
Can anyone let me know .. how the real time work will be ..
I mean how the first day will be...
Wht are the necessary things to be prepared...
Wht are the topics i need to concentrate on....
Kindly respond this is the problem of my life...
Thanks and Regards
SantoshI have to say it really depends on the position you are being hired for.. if it is a brand new implementation, you will have a fairly smooth learning curve.. like what was mentioned in the previous post.. but if they need you to fix something that is broken, the client will expect something right away.. I have been to a place where the Manager logged me in on her user id & just showed a couple of screens & what she expected me to do.. I was literally on my own within an hour, entering their premises..this is not to scare you.. but just that be mentally prepared if you are going to a client that has already been using SAP for a while.. expect fairly knowledgeable colleagues.. if you can show you some result in the first few days, then you automatically win their trust..
Good Luck,
~Suresh
Maybe you are looking for
-
Ipod does not show up in Windows or Itunes! tried everything!
Here is the problem: This is a new problem. Ipod worked fine on this computer until recently. Ipod 5th gen does not show up in My Computer or Itunes. It seems that it happend after I installed the latest update to Itunes. What is happening: When Ipod
-
[nForce] no audio on disk or image when burning a dvd movie
i've recently bought a K7N2 Delta I lsr and since i've had this i have never been able to burn a dvd movie no matter what i try. I've started from scratch trying with just the AC-97 audio drivers installed and downloaded the latest nforce audio drive
-
"SOM expression returned list when single result was expected" error trying to display form
Any Ideas on troubleshooting this error? I am using ES2 SP2, on Windows. Here is the dump from the log, sorry for the format issue, I was unable to figure out the paste option. This is a new but complicated form with many nested subforms. It seems to
-
Photos on iWeb (closer looks)
Hello! How do you set up photos on iWeb so that when they are published, you can click on them and they open a separate window and show you a close up? Thanks! bg
-
How do I save an incoming audio message to my iphone 3gs
How do I save an incoming audio message to my iphone 3GS?