Can anyone explain these features plz ?

Hi,
This is the first time i write in MSI Forum .. I hope we can get benefits
I have FX5700LE-TD256 .. it's great VGA .. however, there are ma~~~~ny features in this card .. Can anybody explain them plz ?
Thanks :hypecrite:

href="http://www.msi.com.tw/html/service/techexpress/vga/dot/page1.htm">http://www.msi.com.tw/html/service/techexpress/vga/dot/page1.htm
Introduction of D.O.T. in MSI
Graphics Cards
D.O.T.(Dynamic Overclocking Technology) is MSI's important
and outstanding breakthrough in mainboard and add-on card technology. Briefly,
D.O.T. is an auto-overclocking function, primarily focusing on detecting the
load of the GPU, and on adjusting the frequency accordingly. When the GPU isn't
running or when the load is low, the frequency remains on Default, which means
D.O.T will onlye be activated when overclocking would benefit the user.
D.O.T. will help the 3D Graphics cards in running games or programs
smoother and faster. For example, when you are running the 3D games or some
image processing programs, D.O.T will adjust the GPU and memory frequency to
optimize performance. However, when you are only surfing on Internet, doing word
processing, or defragmenting your hard drive, the GPU will remain on the default
value.
By using D.O.T., users save time and reduce the risks of trying
overclocking by themselves. MSI spent a lot of time and effort on testing and
experimenting the acceptable and safe overclocking range of GPU. That's why
D.O.T. is far more stable than manually overclocking; the settings have already
been tested. Besides, if the graphics card is overclocked all the time, it not
only wastes electricity but also shortens its life.
size=2>D.O.T. for GPU and Memory Simultaneously
src="http://www.msi.com.tw/images/service/techexpress/vga/dot/2.jpg" width=350
border=1>
size=2>src="http://cweb.msi.com.tw/images/product_img/vga_img/S_8929.gif"
align=right>MSI has made a considerable overclocking
achievement in PCX magic graphics cards. This not only improves 3D performance,
but also meets the needs of most overclockers. Six levels of overclocking are
available, adding up to 10% maximum overclocking performance: Commander,
General, Colonel, Captain, Sergeant and Private.
color=#ff6600>
face="Arial, Helvetica, sans-serif" size=2>Influence of DOT
To show the effects of D.O.T. on 3D graphics card, we used
FX5900U-VTD256 for testing 3DMark03 benchmark in three levels, including
default, Captain and Commander. Let's look at the difference among these
settings from the chart below.
src="http://www.msi.com.tw/images/service/techexpress/vga/dot/3.jpg" width=432
border=1>
src="http://www.msi.com.tw/images/service/techexpress/vga/dot/4.gif" width=639
border=1>
class=px8>As D.O.T. isn't activated, the standard graphics card frequency is
850.5 MHz and 450 MHz.
src="http://www.msi.com.tw/images/service/techexpress/vga/dot/5.gif" width=641
border=1>
As D.O.T. is activated and set to the
Captain level, the frequency is overclocked to 900 MHz and 478.1
MHz.
src="http://www.msi.com.tw/images/service/techexpress/vga/dot/6.gif" width=640
border=1>
As D.O.T.
is activated and set to the Commander level, the frequency is overclocked to 936
MHz and 497.3MHz.
border=2>
color=#0000ff> class=px14
color=#ff0000>Caution:
Although D.O.T. is more safe
and stable than manually overclocking, risks are still involved. We
suggest you that you first make sure your graphics card can handle
overclocking. If you find some abnormal phenomenons while playing 3D games
after enabling D.O.T., such as broken images, we recommend you to either
stop D.O.T or to lower the level of D.O.T.
If you prefer to overclock
manually, you must disable D.O.T. first. We cannot gurantee that every
graphics card can be overclocked to the Commander level.
href="http://www.msi.com.tw/program/service/technical/technical_new_list.php">height=15
src="http://www.msi.com.tw/images/service/techexpress/images/back002.gif"
width=57 border=0>
Copyright ® 2004
Micro-Star Int'l Co.,Ltd. All rights reserved.
Best view with 1024*768
screen display resolution, href="http://www.microsoft.com/windows/ie/default.asp" target=_blank> color=#0000ff>IE6.0^ or href="http://channels.netscape.com/ns/browsers/download.jsp"
target=_blank>Netscape7.0^
browser.

Similar Messages

Can anyone explain these network log enteries to me.

Although my profile says leopard/macpro this relates to a g5 running 10.4.11. I just discovered the firewall has been off. The machine has been behaving very eratically recently in spite of a clean verify disk/permissions clean. We had aq kernal panic yesterday that appeared to be related to a external hardrive, but it still seems a bit eratic.
localhost - - [19/Dec/2008:17:35:51 +0000] "POST / HTTP/1.1" 200 208
localhost - - [19/Dec/2008:20:01:16 +0000] "POST / HTTP/1.1" 200 152
localhost - - [19/Dec/2008:20:01:16 +0000] "POST / HTTP/1.1" 200 152
localhost - - [19/Dec/2008:20:01:16 +0000] "POST / HTTP/1.1" 200 75
localhost - - [19/Dec/2008:20:01:16 +0000] "POST / HTTP/1.1" 200 207
localhost - - [19/Dec/2008:20:01:18 +0000] "POST / HTTP/1.1" 200 218
I assume this is users connecting on our local ethernet network (2 other macs) but why the variable at the end? If the machine had been hacked where would we be able to check if someone had accessed it? Many thanks.

Mostly there are only going to be logs if you set up some kind of logging for that and/or they had failures getting in, but once in, they can erase/doctor the logs & much else.
Some Routers have logs you can check.
You an do all that stuff that WaterRoof does on your own, mostly by learning how to edit the ipfw in Terminal.
WaterRoof is a free GUI into handling that!

Can anyone explain "ignore previous" feature of Wait on Notification function?

Can anyone explain "ignore previous" feature of Wait on Notification function? I have read the help description and other material and I just don't get it. Reference to any good articles I can read will be appreciated.
Thanks in advance.

Hi VI Joe,
if the "ignore previous" input is true, then you only get the notifiers which arrive if you are waiting in the "Wait on Notifiacation" function. If there is a notifier before this function is executed, then you don't see it.
Edit: See the attached example. If the constant is true, then the vi will wait on a notification because the previous is ignored, if the constant is false, then it receives the notifier.
Hope it helps.
Mike
Message Edited by MikeS81 on 06-26-2009 02:36 PM
Attachments:
Notifier_LV85.vi ‏9 KB

Can anyone explain the difference between these 2 versions?

I don't understand why Version 2 works and Version 1 does
not. Both are on the main timeline, however Version 2 nests one
clip inside the other. They both display correctly, however
mouse-dragging only works on the Version 2. The events don't get
fired for Version 1. Can anyone explain what's up?
Version 1:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
Version 2:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.createEmptyMovieClip("man",
thisClip.getNextHighestDepth());
thisClip
.man.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
The handlers are defined as simple calls to
startDrag/stopDrag:
function image_press() {
this.startDrag(false);
trace("man press");
function image_release() {
this.stopDrag();
trace("man release");

handlers applied to a movieclip (like your thisClip.onPress
handler) is removed when that movieclip is the target of a
loadMovie() statement. when loading is complete you can assign an
onPress handler that functions as you expect. or you can use
version 2 to target the child of a movieclip and assign handlers to
the parent.

In the iDVD window, there is a box in the lower left corner. When I scroll over it, I get the message to hide or show the intro movie. Checking or unchecking the box seems to do nothing. Can anyone explain?

Working with iDVD on a project, there is a box in the lower left corner and sometimes another in the lower right corner. Scrolling over the one in the lower left corner, I get a message indicating that this box hides or shows the intro movie. I have checked and unchecked the box, but see nothing different in the project. Nor can I figure out what is meant by "intro movie." Can anyone explain?

Go to iDVD Help and type in Intro Movie, and you will get the full version of this:
Many iDVD themes have “motion menus” that include animations or video that loop, or play repeatedly, until the viewer clicks a menu button. Themes with motion menus have a motion icon in the lower-right corner.
In addition to background video, iDVD motion menus may also feature an intro, or short animation, that plays once before the part that loops. Other motion menus also include an “outro” that plays after the viewer clicks a button, serving as a transition between the menu and the selected content.
An example of an iDVD 6.0 theme with an intro and an outro is Reflection White Main. In this theme, the first drop zones appear in the intro, and the buttons and title appear just before the looping part of the background video. In the outro, everything flies offscreen after the viewer clicks a button.
iDVD provides tools for viewing these motion menus without going into preview mode, which is especially helpful when you are filling drop zones, and for turning the intro or outro off.
Here are ways to view and edit the background movie:
◼
Drag the diamond-shaped motion playhead along the scrubber bar (shown below), to view the background movie, stopping wherever you like.
(If you don’t see the motion playhead in iDVD, choose View > Show Motion Playhead.)
◼
Deselect the checkboxes at the left and right end of the scrubber bar if you don’t want to use the intro or outro, respectively, in your DVD menu.
The scrubber bar shows the intro and outro as shaded areas at the beginning and end.
You can also control the intro and outro from the Menu Info window. With your pointer over the menu (and with no buttons or text objects selected), press Command-I to open that window. Select or deselect the Intro and Outro checkboxes in the Background section of the window.
NOTE: If you drag your own movie to a motion menu background, the outro is automatically removed. To customize the background and keep the outro, use a still image in the menu background instead of a movie.

Can ANYONE explain this IDIOCY?

If I have an IFieldObject or ITextObject with the default height of 221 twips for an Arial 8.25pt or Tahoma Bold 8.25 font.
Why is that a IBoxObject where I set the Top the same as my IField or ITextObject and set the bottom to the Top + 221 twips, the bottoms DON'T LINE UP. Aren't they all 221 twips in height, right?
Same goes with the width...It befuddles me to work in this designer and not have things equal. Also, why in the world would they not give the IBoxObject a HEIGTH property?
How wide is the crSingleLine? 20 twips? I understand that when you set the border the actual height/width grows but the values don't reflect it, is that true?
Can anyone explain the idocy of the measurements and drawing elements in this, used to be good but now is a piece of crap, product? Is there any documentation on this "feature" anywhere? I can't find anything about this in the user guides or help. I'm using 10.2.3600 (sp1) in VS.Net2005 (w/VB.net)

I have deleted the last reply because of the language used in it. I am also locking this thread so no more replies can be added to it.
If you want to get replies to your postings please follow the rules of engagement: https://wiki.sdn.sap.com/wiki/x/FgQ
Be professional, polite, and give us information we need to help you. Remember "us" is not just SAP but all of us in the forum community. Someone other then an SAP engineer may help you, just like you may one time elect help another community member's posting.
Please feel free to repost your questions in this forum following the "Rules of Engagement". Not following these rules will get postings deleted or ignored.
Kind Regards,
Trevor Dubinsky
Senior Engineer,
SAP, Business Objects.

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Can anyone explain how to create lov programatically?

Hi to all,
Can anyone explain to me how to create lov programatically?.
Actually i created a region and items usig code and i want to know how to create lov and mapping also.
Suppose anyone knows plz let me know. its urgent one.
Thanks in Advance.
by
senthur

Hi,
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean); OAMessageLovInputBean lovInput =
(OAMessageLovInputBean)createWebBean(pageContext, LOV_TEXT, null,"inputTest");
webBean.addIndexedChild(lovInput);
// Specify the path to the base page.
lovInput.setAttributeValue(REGION_CODE, "/oracle/apps/dem/webui/Basic");
// Specify the application id of the base page.
lovInput.setAttributeValue(REGION_APPLICATION_ID, new Integer(20001));
// Specify the LOV region definition.
lovInput.setLovRegion("/oracle/apps/fnd/framework/toolbox/tutorial/webui/EmployeesLovRN", 0);
// Validation should be enabled for LOVs unless it's essential for the field to allow a partial value (in a "Search" region, for example).
lovInput.setUnvalidated(false);
// Configure the LOV mappings.
// Note that you must call this method after you add the messageLovInput item
// to the web bean hierarchy.
lovInput.addLovRelations(pageContext, "inputTest", // base page item
"Empname", // lov item
LOV_RESULT, // direction
LOV_REQUIRED_NO);
lovInput.addLovRelations(pageContext, "inputTest", // base page item
"Empname", // lov item
LOV_CRITERIA, // direction
LOV_REQUIRED_NO);
Read more in Dev Guide. Chapter List of Values & Search forums.
Thanks
--Anil

Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?

I want to delete photos from camera roll on my iPhone to clear space to install ios7 but after importing photos to iPhoto on my macbook pro only 4 out of 339 photos taken in September landed in events, though all 339 are in Sept photo stream. It seems like on previous uploads all photos "fell" into events according to the day they were taken, as well as into photostream. I want to make sure these photos stick around permanently and do not exist only in photo stream where I imagine they will eventually be bumped from my computer (photostream). Can anyone explain why some of my photos are landing in events and others are appearing only in photo stream?

You have uploaded two different things - pHotos are in one and only one event - if you have the same photo in two different events then you have imported it twice
Please explain what you want - your initial question and yoru current comments are 180 degrees apart
You say they are not all in events
Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?
Now you say they are
All 15 pics appear in Sept 2013 PS
It sound to me like you have no problem except you imported some photos twice adn you may not understand how the automatic import form PS works - but that is not clear
you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, to select Photo Stream > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture.
The event they are imported into is MMMM YYYY PS
If you import via iTunes sync or by connecting your IOS device via USB then they are importeed into the regular event structrue as defined in your iphoto preferences - and if you imoport via two or more different methods you will ahe duplicates
LN

Can anyone explain me step by step procedure for creating badi?

hi all,,
Can anyone explain me about badi with step by step procedure with an example like trsn code mm01, xd01 etc.
And what is the significance of badi?
regs
hari

Hi
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activateadapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
          MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Can anyone explain me the lovrelation function

Hi to all,
Can anyone explain me the lovrelation function. I tried this but i got an error "The LOV relation that you are trying to add is invalid."
This is lov relation code,
lov.addLovRelations(pagecontext, " ", // base pageitem
" ", //lov item
LOV_CRITERIA, //direction
LOV_REQUIRED_NO )
in this method what is base page item and lov item?
I think i made mistake on this so that i got error (i guess)
Anyone know plz explain me. Its Urgent.
Thanks in Advance
Senthur

Use this method....
addLovRelations(OAPageContext pageContext,
String baseItemName,
String lovItemName,
String direction,
String required
May be it is useful for you....
pageContext - application context for the current page and browser request
baseItemName - ID of the item in the base page that takes part in the new LOV map
lovItemName - ID of the item in the LOV Region that is mapped to the corresponding baseItemName for this LOV map
direction - relation between the baseItemName and the lovItemName. Can take one of the three values:
LOV_CRITERIA - from base page to LOV Region. Managed by OA Framework.
LOV_PASSIVE_CRITERIA - from base page to LOV Region programmatically. Managed from the LOV Controller.
LOV_RESULT - from LOV Region to base page
required - LOV_REQUIRED_YES or LOV_REQUIRED_NO. If LOV_REQUIRED_YES, the baseItemName is a mandatory criteria and should contain a non-empty value when direction is LOV_CRITERIA or LOV_PASSIVE_CRITERIA. Does not apply when direction is LOV_RESULT.
Thanks
Anoop

Can anyone explain me the concept of Process Integration(XI) in detail?

Hai all,
Can anyone explain me the concept of Process Integration(XI) in detail?
Regards,
Sanjeev.

Richa,
As already explained above by another user it means that every time SOA looks for files (in this case every 10 sec) SOA should pick all the files that are atleast 2 Minutes Old. (i.e., the "Current Date Time" - "File Creation Date" >= 2 Minutes).
It has nothing to do with the size of the file, as you mentioned in your example.
e.g. File A of 2 MB requires 1.5 mins to write itself on FTP server completely, it is getting picked up in 2 mins only.
File B of 8KB required miliseconds to write itself on FTP server completely, it is getting picked up in 10 seconds.... ISSSUE?
Here the time when File A and File B arrived in the location matters.
Say the same File A and File B are copied into location (say "D:/FilesToBeRead") at 10:20:30 AM, then the poller should pick up both these files at 10:22:30 AM as you had set your minimum file age property to 2mins.
Hope this helps
Thanks,
Deepak.

Can anyone explain the function BAPI_PROJECT_GETINFO

Hi
Can anyone explain the function BAPI_PROJECT_GETINFO.
Can anyone explain the import and export parameters of this function module.
What is the logic.
I'm getting the output as 'No data record exists'.
This is immediately required.Please help me.
Thanking you
Chandrika.

hi
good
go trhough this
Short text
Read detailed information for work breakdown structures
Functionality
You use this method to read detailed information about project definitions and the WBS elements of certain projects from the system.
Notes
Enter the project definitions and/or the WBS elements, which you want detailed information about, in the parameter PROJECT_DEFINITION or I_WBS_ELEMENT_TABLE respectively.
If you only enter project definitions, the details of all the WBS that belong to the project definitions are read including the hierarchy. If you explicitly enter WBS elements, only these are read.
Messages are returned in Return parameters. For information about the return values and their meaning, see the parameter documentation.
Parameter
PROJECT_DEFINITION
WITH_ACTIVITIES
WITH_MILESTONES
WITH_SUBTREE
E_PROJECT_DEFINITION
RETURN
I_WBS_ELEMENT_TABLE
E_WBS_ELEMENT_TABLE
E_WBS_MILESTONE_TABLE
E_WBS_HIERARCHIE_TABLE
E_ACTIVITY_TABLE
E_MESSAGE_TABLE
thanks
mrutyun^

Can anyone explain the functionality of FM f4ut_parameter_get_values ?

Can anyone explain the functionality of FM f4ut_parameter_get_values ?
This is used in search help to retrive values from screen.This doesnt seem to work for me

hi,
check this
F4UT_PARAMETER_VALUE_GET
Short Text
Standard search help exit for determining contents of a srch help par.
FunctionalityBy calling this module in a search help exit, you can find out the current contents of a search help parameter . To do this, you must pass the name of the parameter in PARAMETER.
You must distinguish between the parameter contents that are used in the selection process of the input help process and the parameter contents that are determined by the selection process and the user selection.
Parameter contents that are used in the selection process are default values of search help parameters, values that are included in the input help process by attaching the search help to the screen from field contents of the screen or its module pool, and possibly complex restrictions made by the user in the dialog box for restricting value. Such parameter contents can also be included in the input help process by the search help exit itself.
The contents of the specified parameter used in the selection process are stored as complex restrictions in SELOPT_TAB after the call. If exactly one value is defined by these complex restrictions (for example if the restrictions have exactly one row and if SIGN = 'I' and OPTION = 'EQ' for this row), this unique value can be found in VALUE.
Parameter contents that are determined by selection process and user selection are the parameter contents that are shown in the dialog box for displaying the hit list or returned on the screen. They are managed by the F4 processor in RECORD_TAB.
This module enables you to transfer the information about the specified parameters from RECORD_TAB to RESULTS_TAB in edited form.
Pass the name of the field of RESULTS_TAB that should contain the contents of the parameter to the function module in parameter FIELDNAME. If the row type of RESULTS_TAB is elementary, pass the value '*' in FIELDNAME. The rest of RESULTS_TAB is not changed. The values are copied row by row. By removing rows at the end or by adding intiial rows you can make sure that RESULTS_TAB has exactly as many rows as RECOD_TAB.
Example
You can find an example of the second kind of use of the module in the search help exit SAPBC_GLOBAL_F4_SFLIGHT of search help SFLIGHT.
Both types of use can be found in the search help exit SAPBC_GLOBAL_F4_SFLIGHT_MIN_FR of search help SFLIGHT_MIN_FREE .
Notes
1. Parameters OFF_RESULT and LEN_RESULT should not be used any more since there are basic problems when using UNICODE. The contents of these parameter are still analyzed when parameter FILEDNAME is initial for compatibility reasons.
2. Only the dialog box for restricting values can normally produce complex restrictions for a parameter.
3. If VALUE has the value SPACE, this means that either there are complex restrictions for the parameter or the unique contents are SPACE. SELOPT_TAB must be evaluated in order to determine which of these is the case.
4. If the search help does not have any parameter with the given name, the exception PARAMETER_UNKNOWN is triggered.
5. Only parameter contents for the search help displayed in the hit list or the EXPORT parameters of the search help are first managed in RECORD_TAB. If the specified parameter does not satisfy one of these conditions and if parameter RESULTS_TAB is specified in the call, the exception PARAMETER_UNKNOWN can also be triggered. This is not true, however, if results were already entered for the parameter with function module F4UT_PARAMETER_RESULTS_PUT or if space was reserved for the parameter in RECORD_TAB with function module F4UT_PARAMETER_ALLOCATE. The parameter therefore should only be defined if information about the parameter contents are really required.
6. The header lines of the specified parameter are also transferred from RECORD_TAB to RESULTS_TAB.
7. The other parameters of this module must be defined as the parameters of the search help exit having the same name, but they are not changed by this module.
8. RESULTS_TAB should be a standard table.
9. The contents of the specified parameter in RECORD_TAB are copied to the specified field of table RESULTS_TAB with a MOVE of the correct type. If this is not possible, the target field is assigned the initial value.
10. If RESULTS_TAB has no field with the name specified by FIELDNAME, only the number of rows of RESULTS_TAB is adjusted to those of RECORD_TAB as described.
Parameters
PARAMETER
OFF_RESULT
LEN_RESULT
FIELDNAME
VALUE
SHLP
CALLCONTROL
SHLP_TAB
RECORD_TAB
SELOPT_TAB
RESULTS_TAB
Exceptions
PARAMETER_UNKNOWN
Function Group
SF4U
if helpful reward some points.
with regards,
Suresh Aluri.

Can anyone explain the advantage of iPod vs iPad over Kobo Vox for reading iBooks?

Can anyone explain the advantage of iPod vs iPad over Kobo Vox for reading iBooks?

Thank you Alan and know you are right. I really can do all I need with my netbook and ereader and do not need the ipad. I think I just wanted something new and felt I may enjoy using it a lttle more than the netook. But it would be a waste just to buy one when I donlt acutally need it And, donl't think it is worth the extra money for me the get the 4g wireless capability since I doubt I would really need it often.
I may treat myself to the Ipad for the color, touchpad and fun to use but it is very expensive considering how little it will do for me no more than the things I want it for. It woudl be and expensive luxuray, I can do without. I actually need t learn how to use more of the function avaiable first. Maybe I should take up playing games and learning to take digital pictures so I can at least load them. If I could learn to do that and take a decent picture, I could start selling back all the "stuff" I have purchased on ebay. haha - I do have a nice doll collection, I would like to sell. I just do not have room for anything else. That was the primary purpose for the Kindle Ereader I bought and enjoy so much,
But, I will hold onto the thought for a while and see how it goes and what other comments I get, If I think I cannot live without it, then I will have to rethink which one to buy, I coud get the 32 g if I did not have to pay for the 4g wireless. And, if I knew I could get help to teach me how to use and enjoy all the functions, I would give it more serious consideration. My granddaugther got one for Christmas and that was what got me interested in it. I love the size of the screen and it had good color and was fast. She even had an application where she could write her notes and it would convert into typed words. That was a neat feature, If you could print it?
But thanks again for your comments and I will check later to see I get any other feedback.
Sunny:)

Can anyone explain these features plz ?

Similar Messages

Maybe you are looking for