Can anyone figure this out??

I recently installed Windows Vista Service Pack 1 on to my laptop. After the install I can't open itunes. Now, I uninstalled service pack 1 and uninstalled Quicktime and iTunes. Now, after downloading the newest version of iTunes...it seems I have a directory problem.
The error msg reads: An error occurred while attempting to create the directory: C:\ProgramData\Apple Computer\Installer Cache\QuickTime 7.50.61.0
It was also saying the same thing about iTunes directory. I talked to people from apple and microsoft...nobody has an answer. I need help!
Thanks in Advance,
Adam

Try increasing the permissions that you have on those folders. See the post at the bottom of the page here:
http://discussion.autodesk.com/thread.jspa?messageID=5802941

Similar Messages

HT201485 When I try to complete an in app purchase a message pops up saying: YOUR PURCHASE CANNOT BE COMPLETED.. I close that and another message pops up saying: CANNOT CONNECT TO THE ITUNES STORE... I am connected to the Internet, can anyone figure this

When I try to complete an in app purchase a message pops up saying: YOUR PURCHASE CANNOT BE COMPLETED.. I close that and another message pops up saying: CANNOT CONNECT TO THE ITUNES STORE... I am connected to the Internet, can anyone figure this out?

Hello,
Brother please follow these steps
1) SignOut from Your apple itunes account
2) Again Sign In Your iTunes Account
And you can turn off your wifi/internet from your iphone and again turn it on
Kind Regards
AmirKhalid (AKQ)

I still am getting Error Code: U43M1D207. Has anyone figured this out yet?

I am still getting error code: U43M1D207 when I go to install udates.
Has anyone figured this out? Its been over three months now

Hi them,
Which OS you are working on ? Can you try deleting the following folder and retry ?
mac : /Users/[username]/Library/Application Support/Adobe/AAMUpdater/1.0/
Win : C:\Users\username\AppData\Local\Adobe\AAMUpdater\1.0
Let us know if it helps!
Thanks!
Kusha

Can't figure this out- cable connection vs wifi connection

Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan Schmidt

Am having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out.

Can't figure this out: locating a MBP on the same wifi network

Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan Schmidt

Am having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out.

In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

The switch is in the upper right of the viewer.

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

How can I figure this out?

Very simple function, but as a beginner, it's still difficult for me.
my mouse wants to detect boxes on the canvas and return the center coordinate of these boxes, how can i figure this out? The game will be, if point(x,y) is inside a box , return box Center

I just noticed that you are placing them on Canvas and it is not a container object. One solution would be to keep track of boundaries of those clickable areas and whenever a click occurs, a check which box was clicked, if any. I hope this helped.

WHY!!!!! I can't figure this out

Why my girlfriend is getting the message that her "remote IP address is invalid" I can't seem to understand or figure this out...

They should turn off Internet Sharing in System Preferences > Sharing if it is On
Are either of you running Internet Sharing? If so, turn it off.
They should not be letting Parallels connect using the Mac's IP if they run Parallels.
Do either of you use Parallels Desktop or VMWare Fusion to run windows on you Mac? If so, turn off their access to the internet in their settings or preferences.
They should not be connected to the Router via wireless (Airport card) and Wired (Ethernet) at the same time.
Are either of you connected to both Ethernet port and Airport wireless at the same time. If so, disable one of the network configurations. Either unplug the cable or turn Airport off.
They should not have two DHCP servers in a modem and router on their LAN.
How are your router and modem configured. If they are both distributing IP addresses, then you need to either set your router to bridge mode or set the modem to assign just one IP address. I don't know what hardware you have, so I can't begin to tell you how to configure either. Unless it is an Airport Base Station, most modems and routers are configured through a Web interface. Airport Utility will let you configure the Airport Base Station.

Can anyone figure this question out?

Hi ,
Sometimes when you go to a website and you want to ask a question or request something you click on the button and then my automatic email sets up except I don't use the safari email I use hotmail. How could I make hotmail open up with the email address of the receiver already in the To: box?
I know there is a way but I can't figure out where to go.
Thanks
Arianna

Hi,
You can set up your hotmail to work with Mail. Go to:
http://email.about.com/gi/dynamic/offsite.htm?zi=1/XJ&sdn=email&zu=http%3A%2F%2F sourceforge.net%2Fprojects%2Fhttpmail-plugin%2F
Download the plug-in and configure it so that Mail works with hotmail. Once you have the account setup, when you click on a link Mail will open and you will be able to send a message from your hotmail account through Mail.
Once you download the files, open it and go to the 'readme'. There are detailed instructions on how to install the plug-in.
Good luck!

I have a report from WhatisHang which (in theory) tells my why my firefox constantly hangs up. But I need someone who can help figure this out.

I hope this section will work, i couldnt find a place for Hang ups, and this problem doesnt usually cause a full crash, which is why it was hard to figure it out.
I finally used the program WhatisHang to try to get an idea of what is causing the seemingly random hanging, but have been unable to find anyone who can help me with it.
I have posted the Troubleshooting Information, though i dont think it would be of much help.
I have the report available but dont know where i can post it.

I must admit I seem possibly to be suffering from hangs also, although as I am often not in a hurry when using firefox on this machine it has little impact. I am using a legacy computer and tend to blame this on the computer or maybe background tasks such as from security software or indexing.
'''Do you still get the hangs in safe mode with all''' (or maybe all but one essential plugin if you think a plugin is involved in the hangs) '''plugins disabled ?
Have you tried to rule out
* background tasks are the problem, (at least monitor what else is running using Task Manager or sysinternals process explorer)
* [[is my firefox problem a result of malware|malware]]. ( consider full system scans with multiple tools/software)
* any other interacting programs or plugins (some may not be listed in firefox, you may need to check / uninstall from the OS {Windows Control Panel})
**it may also be an idea to check hangs still occur when WhatIsHangs is not in use.
* have you tried logging the cc & gc times in the error console, (if for instance you see times in 1000s of milliseconds appearing you may have then identified one reason for firefox being unresponsive, even if the cause is not yet identified. - a symptom the memshrink firefox developers will no doubt be eager to investigate)
* if you can get hangs in safe mode, on at least the Aurora channel releases I suggest you immediately go ahead and file a bug yourself. (I will try to find time if not today then next weekend to look more closely at my own system to see if it is showing hangs in firefox use)
** ideally try with all default preferences
** As you have changed preferences, I suggest you include as a attachment in the bug your list of user modified preferences (use ''about:support'' or Troubleshooting Information option)
** State what security software is in use, it could be an important factor. (I imagine the majority of users have security software, or if not have security vulnerabilities and potentially an undetected malware problem)
I will try to find and download a copy of WhatIsHang, see if it works on my system and what results it then shows.
I realise I have not said anything terribly helpful I solving your problem, but I suspect you are not alone in having hangs, if you are able to spare the time to investigate and report I am sure it will help others.
Firefox has had a few problems recently that would have been solved sooner if they were investigated when first reported, but unfortunatly an advantage of firefox is how easy it is to customise, but the downside is differentiating between a firefox fault and customisation problems.

HT201364 wow - can't figure this out -

I can't figure out how to tell what operating system I'm using and in the downloads it tells me to download OS X Mavericks and then it gives me a system error Very frustrated

You can find out what OS you are using by clicking on the apple icon in the top left corner of your screen and clicking about this mac. you can then use the version number to find out what operating system you are using.
Version 10.5 Leopard
Version 10.6 Snow Leopard
Version 10.7 Lion
Version 10.8 Mountain lion
Version 10.9 Mavericks

Has anyone figured this out yet?.

have searched the forums and still cannot find the answer...
i have imported so far about 12 of my old 8mil to IM08.
am running out of space on my external firewire hd, so want to get rid of some rejected clips in my events.
so...i mark the rejects...get the red line...go to ''rejected clips only'' view...hit move rejected clips to trash button...and it just sits there and then the color wheel comes up and i have to force imovie to quit.
i have tried the advance tools button, no go. The move to trash button is greyed out always, and the only way is to delete an entire event.
does any one have any idea how to fix this?

The solution? Simply wait--for a longer period than you might imagine. I had the SAME issues you did. I'd try to delete 3 seconds of a clip and then wonder why nothing happened after the initial progress bar made it part way after a minute or so and just "hung up". Or so I thought. On a hunch, I let it go for a bit, perhaps 5 minutes or so. The heretofore non trashable clip went to the trash and all was well. I then repeated the same thing another 4-5 times, each time with the same result.
As long as i was patient and let it go without touching anything it would resolve.
Now, can anyone tell me WHY even a simply 3 second deletion should take 75-100 times as long, even with an empty trash bin? What a POS......

I can't figure this out for some reason.

I want to use a template in DVD studio pro and have the button text fade in at a certain point and have it be highlitghed when it is selected. It seems like it should be a simple thing but I can't figure out how to do it.
Thank You
Vincent LeGrow

You would need to animate the background then bring the overlay in (fade in fade outs as part of movie.)
Take a look here for how to do it (this example uses some items from DVD SP templates but would work otherwise, you can skip down to step 8 or so)
http://www.dvdstepbystep.com/ira/

I can't figure this out.

Hi
I have a code as follows :
I have put this code in a
WHEN-BUTTON-PRESSED-TRIGGER
=====================CODE 1============================
DECLARE
temp_id NUMBER;
BEGIN
-- check if the value of GLOBAL VAR selected_node exists.
-- Yes It does exist.
message(:GLOBAL.selected_node);
-- Get id based on the GLOBAL VAR.
select id into temp_id from OTROOT.OT_NES where clli = :GLOBAL.selected_node;
-- Check if value exists. YES it does.
message(temp_id);
-- Call a procedure p_LIST_ITEM to populate a List Item
P_LIST_ITEM1('REGRP','OT_NES.LIST106', 'select distinct to_char(attr_name_list_id),to_char(attr_name_list_id)
from OTROOT.MV_CARDS where ne_id = temp_id order by 1' );
EXCEPTION
WHEN OTHERS THEN
message(SQLERRM);
END;
=======================END OF CODE1=====================
When I press the Button I get the error:
"Cannot create group REGRP from query".
However when I change the variable "temp_id" to 14,
I am able to populate the List Item.
i,e In the above code change "temp_id" as follows:
=======================================================
-- This is working. Here hard-coded number 14 instead of
-- using variable "temp_id".
P_LIST_ITEM1('REGRP','OT_NES.LIST106', 'select distinct to_char(attr_name_list_id),to_char(attr_name_list_id)
from OTROOT.MV_CARDS where ne_id = 14 order by 1' );
This code works fine??
=======================================================
Can anyone suggest me what could be wrong with the above
code. Do I need to use a conversion function?

Sharath,
What you did is a smart work-around but the real fix will be as under: -
P_LIST_ITEM1('REGRP','OT_NES.LIST106', 'select distinct to_char(attr_name_list_id),to_char(attr_name_list_id)
from OTROOT.MV_CARDS where ne_id = '||temp||' order by 1' );
If ne_id is a varchar field, then this is modifed as: -
P_LIST_ITEM1('REGRP','OT_NES.LIST106', 'select distinct to_char(attr_name_list_id),to_char(attr_name_list_id)
from OTROOT.MV_CARDS where ne_id = '''||temp||''' order by 1' );
(Using <bold> for first time in the forum. Hoping that I have not messed it up. Will post this again if it doesn't work.)
Regds
Sumit Dahiya

Can anyone figure this out??

Similar Messages

Maybe you are looking for