Can anyone figure this question out?
Hi ,
Sometimes when you go to a website and you want to ask a question or request something you click on the button and then my automatic email sets up except I don't use the safari email I use hotmail. How could I make hotmail open up with the email address of the receiver already in the To: box?
I know there is a way but I can't figure out where to go.
Thanks
Arianna
Hi,
You can set up your hotmail to work with Mail. Go to:
http://email.about.com/gi/dynamic/offsite.htm?zi=1/XJ&sdn=email&zu=http%3A%2F%2F sourceforge.net%2Fprojects%2Fhttpmail-plugin%2F
Download the plug-in and configure it so that Mail works with hotmail. Once you have the account setup, when you click on a link Mail will open and you will be able to send a message from your hotmail account through Mail.
Once you download the files, open it and go to the 'readme'. There are detailed instructions on how to install the plug-in.
Good luck!
Similar Messages
-
When I try to complete an in app purchase a message pops up saying: YOUR PURCHASE CANNOT BE COMPLETED.. I close that and another message pops up saying: CANNOT CONNECT TO THE ITUNES STORE... I am connected to the Internet, can anyone figure this out?
Hello,
Brother please follow these steps
1) SignOut from Your apple itunes account
2) Again Sign In Your iTunes Account
And you can turn off your wifi/internet from your iphone and again turn it on
Kind Regards
AmirKhalid (AKQ) -
I can't figure this one out...
I've imported a .swf file into one of my table cells. The
cell is 700x200. The .swf file is 700x200.
http://www.associatespd.com/CHSA_Web
I've recut and resaved my .psd file TWICE. I can't figure
this one out.
It seems that the flash file is stretching or something, its
off one pixel on the right. When i set my flash file at 699 width,
it was one pixel off on the right.
Can any offer any suggestions. I'm completely out of ideas.
Thanks in advance.Ally86 wrote:
> Okay, so I have great vision. But what's the fix? The
suspense is killing me!
>
> My logic is saying that since your graphics is off in a
precise pattern, and
> only in your Flash object, that it was moved somewhere
in the flash file
> itself. So it would make sense that it would line up if
you replaced it with
> the original image (if the problem is in the flash, not
the table).
>
> In my mind, I imagine your flash includes half of the
text graphics, cut off
> at that horizontal split - since your movie loads in
only part of the screen.
> Maybe I'm beating a dead horse, but double check the
layer (in your .swf file)
> that your lettering is in for that eagle-eye split.
>
> If it's there, just move the second half over. If it
can't be seen in the
> flash, I promise I'll shut up. Just humor me, pretty
please . . . (I have a
> sneaking suspicion you're willing to try anything)
>
it looks like the graphic's width might have been transformed
at 101% in Flash.
If the actual image file has the right width, I don't see any
other possible explanation.
You should double check in Flash authoring, select your
graphic (or your MC or whatever object you
might have converted it to) and open the transform and/or
info panel. One of these panels will show
you the % width and height ratio of your object...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List -
Can anyone answer this question about unlimited data?
I currently have a phone with ATT... a Samsung. Contract has been up for several months.
I have the unlimited data plan for $30 a month.
When I buy the new iPhone will I be able to just transfer my $30 a month unlimited data plan from my old Samsung phone to my new iPhone's new 2-year contract? Or, will I have to switch to the new data plan thing (with no more unlimited data)?
Can anyone answer this? Been looking online for an answer and got zilch. Thanks.Why are you asking this in a user-to-user iPhone forum? The ONLY source for a definitive answer about the brand new, not yet implemented AT&T data plans is AT&T. You need to contact them. Any "answer" you get here is purely guesswork.
-
Can anyone answer this question regarding MAX RAM?
My old iMac SE DV graphite was purchased and delivered in January, 2000. The original order catalog (which I kept) claimed that it was "expandable to 512mb", as were all the 400mhz G3 slot-loading DV models in various 'flavors' including my Graphite Special Edition model. Also, both / all versions had the ATIRage 128 accelerator with 8mb SDRAM.
The only differences I can discern are that my Graphite has more ram (128mb) and had a slightly bigger hard drive (13GB on the graphite vs 10GB for the 'fruit').
Note: I have since replaced the hard drive with a 20GB since the original died within the first 2 years.
Also, I am running in 10.3.9 most of the time but still have OS 9.2.2 in the machine.
On this disussion site and other places (including MacWorld articles) I've seen conflicting statements as regards the MAXIMUM RAM my graphite should/could have. Some say 1GB (2x512) and some say 512 (2x256).
Can anyone once and for all, settle this question for me so that I can make an intelligent purchase?
(and thank you for the info re: PC100 as the way to go, not PC133)
Thanks & Peace to all.This question was answered in your other post by me. Max RAM is 1 GB.
-
I am used to working on duel monitors. I bought a new MacBook Pro 15' yesterday, the adapter for my monitor, and the monitor is on with the generic background but I can't drag any windows over to it. I can do it on PCs but can't figure out on the Mac. Can someone please help the noob out?
Thanks
NikkiThe blue blocks in that screen are Icons for your actual screens. Their sizes are proprtional to the number of pixels in each screen. They can be dragged to new locations relative to each other -- as long as they are touching at some point. You are expected to drag them so that they correspond with the actual screen location on your bench, so that the movement from one scrren to the other is intuitive.
The white stripe represents the menuBar. It can also be dragged to any screen, and that screen will then be the one with the MenuBar. It will also become the screen with the Startup icons on it. -
Can't figure this one out! CS4
http://dougcabot.com/1.fla
(13mb file)
I'm trying to understand why, in the Flash project above, I get an odd discrepancy between the project as it appears on the Stage, and the version that exports as a SWF.
Here's a description of the problem, though you might find it easier to simply look at the problem, in the blue bunny's legs, for yourself.
I'm animating two characters originally drawn on paper by my daughters, age 4 and 3. The blue bunny character's legs are graphic symbols ("L/R leg squeeze") with a motion tween applied to them, an x-scale transformation, occurring only once per 30-frame bounce cycle.
However, up a level or two at the "lyda armature bounce" symbol, the same transformation unexpectedly occurs three times over the same 30 frames -- seemingly tied to the "pose" keyframes. You can't see this mysterious effect except in the blue bounding box that you get when you select a leg.
If anyone could explain this problem, I'd be grateful. Maybe something to do with my IK armature and the fact that within it, I have moved its component graphic symbols (all of them except the legs) to match the embedded leg-squish animation?Pseudo-classes and container styles are what you need - here
are some
tutorials.
http://www.thepattysite.com/linkstyles1.cfm
http://www.projectseven.com/tutorials/pseudoclasses/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jane Smith 2300" <[email protected]> wrote
in message
news:gmifle$5nt$[email protected]..
> Further to my query, I found this article which suggests
the following:
> CSS Styles are a simple and fast way of making your site
look good. In
> this
> tutorial you will learn how to make cool text rollovers.
>
> The trick is to use the a:hover style! If you work with
Dreamweaver the
> steps
> to follow are given below:
>
> 1. In your style sheet choose New
> 2. Next choose Use CSS selector
> 3. In the drop down menu choose a:hover
> 4. Finally, Define your style. You can choose your font,
color, bold,
> underline etc.
> 5. You're done it! It's easy and fast and really cool!
>
> My problem is that where is the "Use CSS selector"
option.
>
> I tried going under the CSS Styles panel and choose NEW
RULE, but I don't
> see
> the option mentioned above. Am I starting in the wrong
place?
>
> Jane
> -
I recently installed Windows Vista Service Pack 1 on to my laptop. After the install I can't open itunes. Now, I uninstalled service pack 1 and uninstalled Quicktime and iTunes. Now, after downloading the newest version of iTunes...it seems I have a directory problem.
The error msg reads: An error occurred while attempting to create the directory: C:\ProgramData\Apple Computer\Installer Cache\QuickTime 7.50.61.0
It was also saying the same thing about iTunes directory. I talked to people from apple and microsoft...nobody has an answer. I need help!
Thanks in Advance,
AdamTry increasing the permissions that you have on those folders. See the post at the bottom of the page here:
http://discussion.autodesk.com/thread.jspa?messageID=5802941 -
I'm attaching a file that may help. Just remember this is my FIRST attempt at using NI/FeildPoint so things that would be obvious to the normal users more than likely would slide right by me. So I'll try and explain what the text contains as to make my problem more clear. I'm using a FP-1000, FP-AI-100, and a FP-TB-10. i'm creating a application where I'm using the 8 channels from the FP-AI-100 to monitor a control system ,that we manufacture. The control system is in an environmental chamber. I use the FP-TB-10 to monitor the temperature while in the chamber. The control system is ran for 4 hours under varing enviromental conditions while I monitor vital system voltages with the FP-AI-100. Now the application that i'm building starts with the obvious FP CREATE.VI and so forth I have no problem communicating with the FP's, but the information that I'm monitioring needs to be placed into a file with Headers describing the information below it. Now I use a "WHILE LOOP.VI" to monitor the FP-AI-100 & FP-TB-10 for the 4 hour period. but before that I create and open a file where I use a "CONCATENATE STRINGS.VI" to enter the headers I need. I do this by CONSTANTS, CONTROLS, TABs, AND CARRIAGE RETURN being entered into the "CONCATENATE STRINGS.VI" in the order I want them to appear. I use ROW 1 to enter (OPERATOR:with a CONSTANT) an a (CONTROL so the operator may enter his name and be recorded into the file) using a TAB to seperate Columns and a CARRIAGE RETURNto drop down to ROW 2 for the next headers. I use header names and TABs to seperate the columns. This part works great. I end up with ROW 1 having the operator information then ROW 2 having the headers for all the channels I'm using to monitor the control system with in their own column. The trouble happens when I write to this file during the "WHILE LOOP". The information recorded for DATE:, TIME:, and Channel 0 of the FP-AI-100 end up right under their corresponding header on ROW 3, but the rest of the data ends up on ROW 4 in column 3 and goes down many rows with some of the data not being stored at all. It varies on how many rows are used starting at ROW 4 but hey always stay in column 3. I use the "FP READ.VI" outputing to a "ARRAY TO SPREADSHEET STRING.VI" outputing to a "CONCATENATE STRINGS.VI" for each channel within the "WHILE LOOP" then into the "WRITE.VI". I use the "CONCATENATE STRINGS.VI" to place my data OR atleast I thought you could do that some how I'm not quit doing something write either there is a sampling/timing issue or writing to file issue where things are being confused in the "WHILE LOOP" if someone know a better route to perform what I'm tring here I would be interested. Its not like I'm not giving it the old colledge try here but without proper training and the vagness of the manuals it's difficult to understand what every connection actually does.I'm tring though for everyone who happens to fill pity for me
Thanks for your help
John Morris
Glendinning Marine Product, Inc.
Attachments:
ALLchannels 273 KB> I appreciate your effort to help me, but there is still a slight cloud
> in front of my eyes here.(I must mention that I'm using Labview 5.1
Oh, to bad. I'm using LV 6,02 and tried to save the application as LV5.1,
but it didn't work.
> Lets start with the easy one which is the SECOND main thing you
> wanted to mention. In my application I used individual Create Tag.vi's
> "so your saying that I can use just one Create Tag.vi and one Read.vi
> and what ever I use to display the values will automatically to show
> the individual channels" in other words if I use a "Indicator(DBL)"
> comming out of the Read.vi what ever I use in the "PANEL" layout will
> expand to show all 8 channel if I was using a FP-AI-100? Cool...
Allmost right. The 8 channels come out as 1D-array, ch0...ch7.
> #1--How do I change the delimiter (TAB) to a delimiter (comma) in a
> Array to Spreadsheet String.vi?
> ...cut
I don't use this Spreadsheet VI, because files coming out there allways
start this time consuming EXCEL wizzard. Because of this, I programmed my
own CSV-conversion vi. Maybe you could just use a common texteditor, like
wordpad and put the csv-examples from my last reply down to a text file
and rename it to *.csv. Texteditors terminate lines with "\r\n" by
default, so this is a very quick way for testing.
> FP_Analog_Logging example to record all eight channels it uses a Array
I didn't find the vi you metione above, but there is another good one:
Look at examples\FieldPoint\DataLogging\FP Logger.vi.
In a little case structure, at "false", there is a function called "Format
into string".
Pop up on the format string and adjust >>'\' Codes Display<<.
Then you change the format string into: %.;%-f%s
A Tab string is connected to the lower input of this function. Replace
this one with a comma.
That should do.
>
> #2--If using just one Create Tag.vi and one Read.vi and I have the
> Item Name listed as ALL I take it that the information comming out of
> the Read.vi is data for each channel in a String format starting with
> channel 0 and ending with channel 7 for the FP-AI-100.
Yes, just as explained above. If you put a indicator at the output to
display the values, you can expand the display to show all 8 channels, but
you can't name induvidual cells. In a array, all cells have identical
named labels. If you want to name the individually, you have to attach the
array to cluster function and put the indicator after this one. Enable
labe display and name the output values individually.
> #3--Now I use the following to "Format String" in the Array to
> Spreadsheet string.vi (%.4f)but I don't see anyway of changing the
> delimiter from (TAB) to (COMA)
Explained above.
> #4 you stated text strings need a "as prefix and sufix" and each
> string is seperated by a coma, a period is used as decimal number
> separator and lines have to be terminated by my question is
> WHERE IS THIS ACCOMPLISHED? WHAT VI OR WHAT CONNECTOR PIN?
Well, modifying strings are done with string functions.
Above, as I explained how the sample FP Logger.vi can be modified to do
the job for numbers. The pre- and suffixing with ", you only need for
strings, which EXCEL should interpret a string and as nothing else as a
string, even if there's a number inside. You usually need this only for
headers. So its easyest, if you just write your string into a string
constant or control and concatenate it to the previous csv-file contents.
Oh, I just see by looking at the above mentioned example... Inside the
case structure, but in the "true" case, there are error messages
concatenated to the logfile. At this point it is importent, to use " for
integrating the message into the CSV file, because a error message usually
looks like this: >> ERROR 2345 in vi yxz <<
Here you have text and number strings mixed in one line. EXCEL does not
know, if it should interpret the number inside the error line as separate
number, separating the line into three colums i.e. string before number,
number and string after number. So tell EXCEL by putting a " before and
after the line each.
For this, expand the Format To String function by one input, move down all
connections, to be able to insert a string constant with a " to the first
argument connector. Change the contents of the string constant at the
bottom argument from tab to ", (quotation mark AND comma)
> #5 You gave me an example of what a 3 column header could look like:
> "col0","col1","col2"\r\n Now is this something that you enter
> somewhere cause I know that \r is carriage return and \n is newline so
> I take it that the above is entered somewhere maybe in the Write.vi to
> the connector called Header (F)? See this is what confuses me because
> NI manuals have no examples of certain connectors types being used or
> any reference as to how they manipluate data with there varing type
> inputs. Or maybe I'm just missing them.
The example I mentioned above help here to.
Look at the Write File function. This function receves data from a
function named concatenate strings. Expand this function to have one more
spare input at the bottom. Create a string constant. Switch the constant
display to "\" mode. Enter "col0","col1","col2"\r\n into the constant.
Connect the constant to the spare input.
Doing this, every dataline in the csv file is followed by
"col0","col1","col2"\r\n .
I wish you a nice weekend,
Rainer Ehrt -
MIDI CLOCK stopped working and I can't figur this one out.
I have been sending MIDI clock to my Native Instruments Guitar Rig so I can sync the Loop Machine with Logic, everything was working pretty good till...??? I am not sure what I could have done to goof it up but now I get no MIDI signal out the port ( I set it to all MIDI ports). I tested the cables with a LED tester and all the settings I set to get it working in the first place but now Logic seems to not be sending the clock any longer. I also sync a Micron keyboard and use its arpegiator... well I was till this happened. Anyone have any ideas?
Thanks!Hi,
Delete Logic preferences from the user>library>preferences folder
(export your key commands before deleting)
G -
Can't figure this one out - Buddies all grayed out - show offline.
Just helped setup a new Mac convert and I am at a loss to get his iChat to connect. His new broadband connection is Cox cable using a Scientific Atlanta DPC2100 Series. Web browsing is good and fast. When I carefully set up his Buddy list, and have the iMac firewall off, the Buddies remain greyed out even when we confirm by phone that they are online. They also show him as greyed out on their iChat. To simplify, I disconnected my Powerbook with iChat, iSight, etc. all working perfectly from my DSL connection. I then carried and connected to the DPC2100 directly with Ethernet and confirmed web browsing. But, my iChat did the same thing, showing Buddies greyed out and offline and they could no longer see my presence online either.
The only variable seems to be the switch from DSL (ok) to Cox Cable with the DPC2100. Then, returning to the DSL all is fine.
I discussed this with Cox ??tech support?? and two different people said it had nothing to do with the cable modem or their connection. It appears that expecting ANY support from COX cable tech is a losing proposition, so I am turning to logical Mac users. Thanks for any ideas to resolve this.
iMac 1.8 G5 and Powerbook G4 Mac OS X (10.4.4) no router, no firewall, no privacy, etc.I would look for a cable Modem that is configurable (most you purchase youself will be).
Something like this
Or this
Generally go for something that is not going to handle VoIP as well. (Not SIP Aware)
On the other hand if he has a install CD that came with the device there might be Read Me with the default IP Listed to make Access.
Or try the Scientific Atlanta Website (although I can not get the page to load today (Sun 22nd)
This Forum item suggest the default IP is 192.168.100.1 but also suggests problems due to the ISP this was supplied from.
Ralph -
Adding to the question I posted, my iPad will string words together by inserting letters (usually m, but sometimes n) between. Even when I back up and delete the extra letter, it will pop up again until the second delete. So it's in autocorrect? Have I taught my device to do this by being a sloppy typist?
Try asking in the iPad forum. This forum is for iPhones being used in an Enterprise (corporate) environment.
-
Cannot open the NYT crossword App after paying for a full year's subscription. VERY frustrating!!!! Anyone else having this prob?
Working for me. Try a Reset: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.
-
Help me please, I can't figure this one out!
Alright so I just got a Ipod Video 5th Gen and I also have a mac. The ipod came formatted for windows and when I hooked it up to my mac, itunes wouldn't recognize it and ipod updater wouldn't do anything with it where it would recognize it but it would say that it can't restore it or update it. My mac doesn't have an internet connection at the moment but I have ipod updater 6-28-06 on it along with itunes. I have tryed restoring it on a regualar windows computer but I Couldn't change the format. How do I change the format to Mac? Any help is appreciated.
See put your iPod into disk mode before doing the Restore helps
Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Otherwise, For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Eject your iPod and do a Reset -
Can anyone answer this question for me
okay so i have a mid 2012 macbook pro and being a student myself i travel 4 days a week to and from college with my mac anyway while i was in class the other day i placed my laptop onto the desk and i must have put my mac onto my grit and i have slight airline scratch on the bottom caseing i called my apple store and i asked if the case can be replaced the guy said yes it can be but i will need to book an appoment with a genius but as you know apple apple macs laptops have the designed by apple in california and serial number etc on them if i was to buy a new case for it from apple would it contain these any ideas and help is allways welcome. thanks Ryan
ryan678 wrote:
okay so i have a mid 2012 macbook pro and being a student myself i travel 4 days a week to and from college with my mac anyway while i was in class the other day i placed my laptop onto the desk and i must have put my mac onto my grit and i have slight airline scratch on the bottom caseing i called my apple store and i asked if the case can be replaced the guy said yes it can be but i will need to book an appoment with a genius but as you know apple apple macs laptops have the designed by apple in california and serial number etc on them if i was to buy a new case for it from apple would it contain these any ideas and help is allways welcome. thanks Ryan
I'm sorry but it is very difficult to understand your very long one sentence post. Are you asking what information will be contained on the case? Or are you asking how to go about changing the case? Maybe you're asking if it is worth replacing the case because of a scratch. Or, are you asking if the new case will be designed in California?
Try rephrasing your post.
Maybe you are looking for
-
How do I retrieve my iTunes library from a broken computer onto another computer?? I've clicked on home sharing and also authorized the new computer to my account but still nothing!
-
Is there a way to have different mailboxes have different fields?
Every few months I move my IMAP mail over into several local mailboxes (with icons shaped like the blue folders) into the "on my mac" portion of mail. This way I keep my quota down, and IMAP will tend to run a little better. When I go through all ema
-
What is the cost of the upgrade if you are under a 2 year contract already?
Do you have to be clear of a 2 year contract for this iPhone trade-in to be a deal? Such as I have a 4s that I got at the beginning of August for my first smartphone because it was the free option at the time. I love the phone but because I just st
-
What's the maximum RAM for this notebook (C742EM)
What is the maximum RAM size for this notebook?
-
Hi All, Im trying to migrate a simple webapp into portal enabled webapp. I wonder what are the jar files I need to copy into WEB-INF/lib directory? I just want portal-light framework. No other heavy portal functionality required. I copied these porta