Can anyone fix these sweat stains in these pictures?

the girl has armpit stains and i was wondering if anyone can fix them. please please!
[IMG]http://i44.tinypic.com/cqjph.jpg[/IMG]
[IMG]http://i42.tinypic.com/2hp5zxd.jpg[/IMG]
[IMG]http://i44.tinypic.com/4ls8g.jpg[/IMG]
[IMG]http://i43.tinypic.com/avlxxc.jpg[/IMG]
[IMG]http://i42.tinypic.com/21kfcjt.jpg[/IMG]

See my reply to your original message:
http://forums.adobe.com/message/4047963#4047963
Ken

Similar Messages

Can anyone please find me examples of these methods.......

I'm trying to get a better idea what "Helper methods" do but cannot find any good examples, can anyone please find me examples of these method.
Also how do I print methods between different classes in a program??
many thanks

Also how do I print methods between differentclasses
in a program??This question makes no sense to me.I've got some classes that need to print methods from
an input/output class, what code is needed for
this????You want to print methods? You might use Reflection for this. An Input/Output class? What is that? You want to print method signatures from a class that handles IO? Why should it matter what the class does?
I've no idea what code might be needed to do whatever it is you are wanting to do here - please clarify and see if we can get a more useful answer.

Can anyone tell me how to draw these pictures

i dunno how to draw the lower two circuits ...can anyone draw them for me ?
Attachments:
Picture 001.jpg ‏821 KB

If your drawing for cct 3 is correct (with a node/junction @ the center of the X), then it will be like mostafa_cct3-1. This is equivalent to the next cct that I have drawn, i.e. mostafa_cct3-2.
It's your drawing, only you can tell if it is drawn correctly (or ask your lecturer?). Calculating the current is simple in this case - just a matter of series/parallel resistors.
Attachments:
mostafa_cct3-1.jpg ‏61 KB
mostafa_cct3-2.jpg ‏58 KB

I installed LabVIEW 5.1 on an XP machine and some of the VI's, such as fit to curve, do not have icons. Instead, they have a ? where the icon should be, and they cannot be inserted into my VI's. Can anyone fix this?

I am using a Dell Inspiron I8100 Laptop with Windows XP Home and am running LabVIEW 5.1 in Windows 95 compatability [I also did so for the install to get rid of the "wrong os" message]. I am able to use nearly all of the functions, but a few of them did not make the transition to my machine. I cannot use some of the VI's contained in the Mathematics sub-palette, I cannot use some of the demos, and it is really setting me back. Instead of an icon for the Mathematics>>Curve Fit sub-palette I get a ? in an icon-sized box that says Curve Fit for it
s description. Can anyone fix these broken links?
Attachments:
LabView.bmp ‏2731 KB
labview2.bmp ‏2731 KB

From your discussion I have seen that you try to use LV 5.1.
It seems that 5.1.1 will work correct. The difference is that 5.1.1 is compatible with Win 2000 and 5.1 is not. This can by a issue.
Another thing I have seen under Win2000 is the rights a user has. Since you use XP Home there should be no restrictions to the user of the machine. One thing to take into account is do you install and use LV as the same user?
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Can anyone fix this vi

The right button is not working in this vi. Can anyone fix it??
Attachments:
Boolean grid.vi ‏21 KB

He is using LV 2009. If he wouldn't, opening the VI in newer versions would create the *-symbol in the end of the VIs name showing that there are unsaved changes. Looking into the VI settings >> General >> List unsaved Changes would reveal the original version.
To answer the question:
The VI has too many unnecessary local variables and lacks in a proper architecture. You do not have a timing in your loop leading to 100% CPU load at a single core. Please look into the State Machine (Video and Exercise here) or the UI Event Handler for further info (event handler only with LV FDS oder PDS).
Additionally, your algorithm for shifting the active LED is no good. I cannot give you any useful information on a solution since it is not clear how the move should look like (what happens if LED is shifted out of the 3x3 array in any direction? Does it appear on the opposite side in the same column/row or does it shift to another one?)
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Can anyone tell me how to save a picture thats on facebook as a jpg instead of webarchive

can anyone tell me how to save a picture as a jpg all the time
when I try to save a picture from facebook it saves as a webarchive and then you can't put it into iphoto

If you are using Safari, control-click on the image. One of the options in the resulting floating menu should be "Add Image to iPhoto Library."

How can i fix mms to send and recive pictures

How can i fix mms to send and recive pictures?

What do you mean "fix" MMS? If you mean enable it: Settings>Messages>SMS/MMS>MMS Messaging = ON
Cheers,
GB

Can anyone tell me the difference between these String methods?

There are methods that can convert a byte[] into string:
String(byte[] ascii, int hibyte, int offset, int count)
String(byte[] bytes, int offset, int length)
String(byte[] bytes)
I am now sticking on it. The first one runs great in my project, but it is deprecated. The remaining two return wrong answer I need. Can anyone expain what the difference between them? Really appreciate the help, thanks in advance.

It seems like the first one translates each byte into one character. The other two use the default character encoding to translate possibly more than one byte into each character. Look up Unicode character encodings to understand the difference.

Can anyone fix my Bing Seach XML/CSS problem?

I can still search but I get results like shown in the attachment, and the other search options such as Local and Media are unavailable, showing the same messed up screen as the standard search.
Can anyone help? It's a brand new 620 just a few weeks old. Before this happened I got an XML error which I didn't manage to screen capture, then search worked fine for a few days, then this happened and it's been like this for a week now.
I've tried changing search settings, clearing history, restarting, and changing language and keyboard settings. I don't seem to have many other options short of a factory reset which I'd like to avoid.
So if anyone has some helpful input I'm all ears. Nothing daft.
Thanks
Attachments:
wp_ss_20130305_0001.jpg ‏97 KB

becuase wp8 is not open source, there really isnt much trouble shooting you can do around these situations.
sounds like you covered your basic bases and already know your last option.
i would be sure to back up your data and give it a rip.
you can try a soft reset before you go to the full extent of complete factory reboot....
power + Vol Down

I can't access my pictures anymore through iPhoto because I simply don't know where they are stored when imported into iPhoto. The library used automatically before is not shown anymore. Can anyone help me to recover all my pictures?

I had some problems with my MacbookPro and did some clean up and further back-up (time machine already in place for a long time). Now, suddenly I can't access my pictures anymore through iphoto asking me for a library (never asked for before) and I have no clue where the pictures are actually saved when imported in iphoto. Can anyone help me recover my pictures, such as telling me WHERE the pictures are actually stored? Thank you so much!

I had some problems with my MacbookPro and did some clean up
A critical question - exactly what "clean up" did you do and how?
Do you have an iPhoto library in yoru pictures folder? If you depress and hold the option key and launch iPhoto - what do you see in the select library window? Select each library there and see what you have
LN

Can anyone fix broken thumbs?

Importing iMovieHD 6 projects seems a bit hit and miss.
I am upset that transitions and soundtracks disappear.
But sometimes the imported footage has mis-matched thumbnails.
Check out the house-versus-the daughter mis-match below.

Ok I based have it fixed here's what I did.
I deleted the thumbnail cache folder in the bad event.
When that didn't work, I went into the main clips folder and could see that some names were nearly the same, clip80 and clip80.dv.
since just adding .dv would cause name conflicts I renamed all the files without the .dv adding "a.dv", so clip80 becomes clip80a.dv (this took a long time as I have lots of these)
Reran iMovie, it began remaking the thumbnails, but at the end it crashed (sent report to Apple).
BUT upon restart the event was all fixed.
Hope this helps someone someday (until an update fix is posted)

My ipod had a little rain damage and screwed up but later on fixed it and was fine. Later on that day the connect to itunes screen popped up and when i connected it it said "your ipod has a passcode" and then says try again. can anyone fix this?

Yeah everything is in the question so plz hep me....

Quinten,
It will erase all of the information on your ipod. When was the last time you synced your ipod? If recently you should be able to recover most of your files. If not you will only be able to have the files since you last synced it to your computer. Can it sync it ignoring the passcode? If so try that. If none of these work you may just have to plainly restore it or put it in recovery mode.
Thank you for choosing Apple!
MH, an Apple expert

Can anyone fix dock freezes

For the past couple of months, I think since the 10.4.3 update, the docks on my Powerbook G4 and iMac G5 are having a problem freezing. The Powerbook is the main culprit. As I slide the cursor over an application it starts to bounce and then the whole screen freezes with the bouncing application icon part-way out of the dock. The only way I can end the freeze is to double click on a file on the desktop--then after a minute or two the freeze suddenly ends. I searched through Discussions but did not find anything useful. I have done the usual maneuvers--repaired disk permissions, ran Disk Warriors, did all updates (now 10.4.4), trashed the dock plist preference etc. I use a Kensington USB wireless mini mouse on both computers in case anyone thinks that is the problem.
ds

David, I have dock magnification off. So, that cannot be it. I have tried all the usual tricks: resetting user privileges (with disk aid), cleaning caches (using Applejack),... All to no avail. Am still struggling and finding it quite hopeless. I am typing this on my IBM ThinkPad now...
And, my PowerBook has 1 GB RAM (installed when bought). All worked well up to including MacOS 10.3 Panther.
Pascal

Can anyone fix this.??please help.

i want to learn how to program games in java and i found a good tutorial on 1javast.com on making a space invaders applet. i can get the code to compile but the applet doesnt work properly. does anyone have any ideas? here is the code.
import java.awt.image.*;
import java.awt.event.*;
import java.applet.*;
import java.awt.*;
public class Game extends Applet implements Runnable, MouseMotionListener, MouseListener
BufferedImage bufferdImg;
Graphics2D bufferdImgSurface;
Thread gameThread;
int width=400, height=400, MAX=50, speed=10;
int currentX[] = new int[MAX];
int currentY[] = new int[MAX];
int step=0, // Number of movements left/right
direction=1, // Current left/right direction (0=left, 1=right)
shipX=width/2-10, // Current player X possition
shipY=height-45, // Current player Y possition
mbx=-10, // The mouse position after mouse down, sets the_
mby=-10, // enemy bullet position to this.
randomShoot=0, // Used to work out which enemy is shooting
health=50, // The players health
BNUM=10, // Number of bullets
playing=0; // Are is the game playing (0=Playing, 1=Paused, 2=Game Over, 3=Win)
int bX[] = new int[BNUM]; // Bullet X pos.
int bY[] = new int[BNUM]; // Bullet Y pos.
int ebX[] = new int[BNUM]; // Enemy Bullet X pos.
int ebY[] = new int[BNUM]; // Enemy Bullet Y pos.
long start=0, // Frame start time
tick_end_time, // End frame time
tick_duration, // Time taken to display the frame
sleep_duration; // How long to sleep for
static final int MIN_SLEEP_TIME = 10, // Min time to sleep for
MAX_FPS = 20, // Max frame rate.
MAX_MS_PER_FRAME = 1000 / MAX_FPS; // MS per frame
float fps=0, // Current frame rate
dist; // Distance between 2 points
public void start()
Thread gameThread = new Thread(this);
gameThread.start();
public void init()
currentX[0]=0;
currentY[0]=0;
int row=10, // Current Y position
col=10, // Current X position
count=0; // How many circles have been drawn
//set the co-ordinates for each circle
for(int i=0;i<50;i++)
count++;
currentX=col;
col+=25;
currentY[i]=row;
if(count==10)
row+=25;
col=10;
count=0;
addMouseMotionListener(this);
addMouseListener(this);
for(int i=0;i<BNUM;i++)
bX[i]=-10;
bY[i]=-10;
ebX[i]=0;
ebY[i]=height+10;
public void run()
while(true){ // Starts the game loop
start = System.currentTimeMillis(); // Sets the current time
// Are we playing or is the game over?
if(playing==0)
step++;
for(int i=0;i<MAX;i++)
if(step>15)
if(direction==1)
direction=0;
else
direction=1;
step=0;
for(int j=0;j<MAX;j++)
currentY[j]+=speed;
if(direction==1)
currentY[i]+=speed;
else
currentX[i]-=speed;
for(int i=0; i<BNUM;i++)
if(bY[i]<=0)
bX[i]=mbx;
bY[i]=mby;
mbx=-10;
mby=-10;
bY[i]-=speed;
for(int i=0;i<MAX;i++)
for(int j=0;j<BNUM;j++)
if(!(bY[j]<=0))
dist=(int)(Math.sqrt(Math.pow((currentX[i]+10)-bX[j],2)+
Math.pow((currentY[i]+10)-bY[j],2)));
if(dist<=20)
bY[j]=-50;
currentY[i]=-500;
for(int k=0;k<MAX;k++)
randomShoot=(int)(Math.random()*MAX);
if(currentY[randomShoot]>=0)
for(int i=0;i<BNUM;i++)
if(ebY[i]>=height)
ebX[i]=currentX[randomShoot];
ebY[i]=currentY[randomShoot];
break;
//shooting the alien bullets
for(int k=0;k<MAX;k++)
randomShoot=(int)(Math.random()*MAX);
if(currentY[randomShoot]>=0)
for(int i=0;i<BNUM;i++)
if(ebY[i]>=height)
ebX[i]=currentX[randomShoot];
ebY[i]=currentY[randomShoot];
break;
for(int j=0; j < BNUM; j++) {
if(!(ebY[j]>=height)){
dist = (int)(Math.sqrt(Math.pow((shipX+10)-ebX[j],2) + Math.pow((shipY+10)-ebY[j],2)));
if(dist <= 20){
ebY[j]=height+10;
health-=10;
for(int i=0; i < BNUM; i++){
if(ebY[i] < height) {
ebY[i]+=speed;
if(health <=0)
playing=2;
int count=0;
for(int j=0; j < MAX; j++){
if(currentY[j]<0)
count++;
if(currentY[j]>=340)
playing=2;
if(count==MAX)
playing=3;
} else { }
repaint(); // Redraw the screen
public void paint(Graphics g)
update(g);
public void update(Graphics g)
Graphics2D g2 = (Graphics2D)g;
// Set the background color.
bufferdImgSurface.setBackground(Color.black);
// Clear the applet.
bufferdImgSurface.clearRect(0, 0, width, height);
bufferdImgSurface.setColor(Color.green);
//(X pos, Y pos, Width, Height)
for(int i=0; i < MAX; i++)
bufferdImgSurface.fillOval(currentX[i], currentY[i], 20,20);
// Draw the read ship (a square)
bufferdImgSurface.setColor(Color.red);
bufferdImgSurface.fillRect(shipX, shipY, 20, 20);
for(int j=0; j < BNUM; j++){
bufferdImgSurface.setColor(Color.yellow);
bufferdImgSurface.fillOval(bX[j], bY[j], 5,5);
bufferdImgSurface.setColor(Color.blue);
bufferdImgSurface.fillOval(ebX[j], ebY[j], 5,10);
// Draw a bottom line to our window
bufferdImgSurface.setColor(Color.red);
bufferdImgSurface.drawString("_________________________________________________________",0,375);
if(playing==1)
bufferdImgSurface.drawString("PAUSED", width/2-10, 390);
else if(playing==2)
bufferdImgSurface.drawString("****Game Over****", width/2-10, 390);
else if(playing==3)
bufferdImgSurface.drawString("****You Win!****", width/2-10, 390);
for(int i=0; i < health; i++)
bufferdImgSurface.drawString(" |", (2*i), 390);
// Draw the buffered image to the screen.
g2.drawImage(bufferdImg, 0, 0, this);
public void mouseMoved(MouseEvent e) { shipX=e.getX()-5; }
public void mouseDragged(MouseEvent e) { shipX=e.getX()-5; }
public void mouseClicked(MouseEvent e) {
mbx=e.getX();
mby=shipY;
public void mousePressed(MouseEvent e) {
mbx=e.getX();
mby=shipY;
public void mouseEntered(MouseEvent e) { playing=0; }
public void mouseExited(MouseEvent e) { playing=1; }
public void mouseReleased(MouseEvent e) { }

this doesn't come close to compiling

HT1688 The apps that come with your iPhone 4 are all spread i need someone to fix it can anyone fix it.

the apps that came with my iphone 4s are all spread can some help me fix it I tried to reset that did'nt woorke . Can aneyone help me its a also important that I fix it because its inportant that I get it fixed because I go vacation this tuesday please someone help me.

What are you talking about? All spread?
speak English. Then we can assist you.

Can anyone fix these sweat stains in these pictures?

Similar Messages

Maybe you are looking for