Can anyone give a brief intro and sample of how to use semaphore & it concept

Thanks.

Did you browse thro' the LabVIEW online help or te Example Finder? They ll be of immense help.
- Partha
LabVIEW - Wires that catch bugs!

Similar Messages

Recently, i bought an aztech WL568usb wireless dongle, they provided me with an ralink driver. after installing it, i do not know how to operate it. can anyone give me step by step instruction on how to use ralink wireless utility?

can anyone please give me a step by step instruction on how to use the ralink wireless utility?, i do not know how to make it work. please anyone.........

best part is i contacted and they did not care..................... if you don't believe, you have a face book right? look at this page... http://www.facebook.com/#!/aztech.electronics/posts/192486637493042?notif_t=shar e_reply

Can Anyone give me a step by step on how to create a poster frame?

I am trying to create a poster frame for a video I edited with Final Cut Express HD. I have read all kinds of topics but they seem complicated. Does anyone know a simple way of creating a poster frame ?
Thanks!

QDigital wrote:
I am trying to create a poster frame for a video I edited with Final Cut Express HD. I have read all kinds of topics but they seem complicated. Does anyone know a simple way of creating a poster frame ?
Thanks!
Poster frame can mean a few things.
More info please on what exactly you mean.
Al

Can anyone give me step by step instructions on how to add my school email address to mail?

Thank you to all who respond.

Sorry I goofed.
In Safari on your iPhone there is a bookmark for the iPhone Users Guide. Load it up! Look at the chapter on Mail > Setting up Accounts.
You'll need your Mail Passwprd, and the incoming and outgoing mail servers. These are obtained from the Information Technologies person at your school.

Can anyone share a step by step instruction on how to use M-flash?MSI 970 Gaming

I've been researching online and alot of the information regarding on how to do this are really inconsistent and outdated. even the video shown here stops at the end and doesn't explain what you need to do once u get back into the bios. I've also pinged MSI tech support and they are very vague and sound speculative in their answers. HELP! this is for an MSI 970 gaming board.

procedure same as the Xpower video.
1. Put the bios file in the root folder of your USB pen drive
2. Go to bios --> Mflash --> Select one file to update bios
The system will then start to flash the bios.
3. After flash success then just remember to go to bios and press F6 then F10
Note: there is always risk in updating bios, if you don't encounter any issues at all then there's no need to update your bios

When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

First thing i would try is to use another cable if available.

Im traveling to New York in a few months and considering buying the new iPad while im there. Can anyone give me advice on what i need to buy while im there so as to be able to use to use it back here in the UK?? Any advice is much appreciated.

Im travelling to New York soon and consrdering buying a iPad while out there. Can anyone give me advice what i need to buythanks.
to allow me to use it back here in the UK?? Many thanks
Mark th

Buy the "AT&T" model iPad, not the Verizon one (which does not support SIM cards used most everywhere in the world). The ATT model comes with a SIM card, but you can then get one from a UK provider. Be sure it's a "microSIM" card, not the larger kind when back in the UK.

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
 Cheers, Tom

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox. 
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

Can anyone give me an example of direct, queued and unserialized delta?

hi all,
Can anyone give me an example of direct, queued and unserialized delta for fi and sd applications.
thanxs in advance
regds
hari

hi,
Update Methods,
a.1: (Serialized) V3 Update
b. Direct Delta
c. Queued Delta
d. Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
a. Update methods: (serialized) V3
Transaction data is collected in the R/3 update tables
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
V2 Update errors can lead to V3 updates never to be processed
Update methods: direct delta
Each document posting is directly transferred into the BW delta queue
Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
Update methods: queued delta
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
Update methods: Un-serialized V3
Extraction data for written as before into the update tables with a V3 update module
V3 collective run transfers the data to BW Delta queue
In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
V2 update has to be successful
hope it helps
partha

I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

I just bought a new iPhone 5 and both the itunes and the App Store apps don't work, can anyone give me some answers?

Follow the directions here:
http://support.apple.com/kb/HT2109

I have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

i have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

You will have to ask Vodafone to do it for you.
Here is a link to their online form http://campaigns.vodafone.co.uk/UnlockCodeRequestForm/

Can anyone give me some documents for data cluster

Hi,
can anyone give me some documents for data cluster?
ths!
regards!

Hi ,
The following is a documentation on the Data Cluster:
Data clusters are specific to ABAP. Although it is possible to read a cluster database using SQL statements, only ABAP can interpret the structure of the data cluster.
You can store data clusters in special databases in the ABAP Dictionary. These are called ABAP cluster databases, and have a prescribed structure:
Cluster Databases ( I have explained the cluster databse below )
This method allows you to store complex data objects with deep structures in a single step, without having to adjust them to conform to the flat structure of a relational database. Your data objects are then available systemwide to every user. To read these objects from the database successfully, you must know their data types.
You can use cluster databases to store the results of analyses of data from the relational database. For example, if you want to create a list of your customers with the highest revenue, or an address list from the personnel data of all of your branches, you can write ABAP programs to generate the list and store it as a data cluster. To update the data cluster, you can schedule the program to run periodically as a background job. You can then write other programs that read from the data cluster and work with the results. This method can considerable reduce the response time of your system, since it means that you do not have to access the distributed data in the relational database tables each time you want to look at your list.
Cluster Database :
 Cluster databases are special relational databases in the ABAP Dictionary that you can use to store data clusters. Their line structure is divided into a standard section, containing several fields, and one large field for the data cluster.
Creating a Directory of a Data Cluster
To create a directory of a data cluster from an ABAP cluster database, use the following statement:
Syntax
IMPORT DIRECTORY INTO <dirtab>
 FROM DATABASE <dbtab>(<ar>)
 [CLIENT <cli>] ID <key>.
This creates a directory of the data objects belonging to a data cluster in the database <dbtab> in the internal table <dirtab>. You must declare <dbtab> using a TABLES statement.
To save a data cluster in a database, use the EXPORT TO DATABASE statement .
For <ar>, enter the two-character area ID for the cluster in the database. The name <key> identifies the data in the database. Its maximum length depends on the length of the name field in <dbtab>. The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
The IMPORT statement also reads the contents of the user fields from the database table.
If the system is able to create a directory, SY-SUBRC is set to 0, otherwise to 4.
The internal table <dirtab> must have the ABAP Dictionary structure CDIR.
******** Sample Program illustrating the data cluster .
PROGRAM Zdata_cluster.
TABLES INDX.
******to save data objects in cluster databases
DATA: BEGIN OF ITAB OCCURS 100,
 COL1 TYPE I,
 COL2 TYPE I,
 END OF ITAB.
DO 3000 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
APPEND ITAB.
ENDDO.
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
INDX-PGMID = SY-REPID.
EXPORT ITAB TO DATABASE INDX(HK) ID 'Table'.
WRITE: ' SRTF2',
 AT 20 'AEDAT',
 AT 35 'USERA',
 AT 50 'PGMID'.
ULINE.
SELECT * FROM INDX WHERE RELID = 'HK'
 AND SRTFD = 'Table'.
WRITE: / INDX-SRTF2 UNDER 'SRTF2',
 INDX-AEDAT UNDER 'AEDAT',
 INDX-USERA UNDER 'USERA',
 INDX-PGMID UNDER 'PGMID'.
ENDSELECT.
****To create a directory of a data cluster from an ABAP ****cluster database
DATA DIRTAB LIKE CDIR OCCURS 10 WITH HEADER LINE.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE
 INDX(HK) ID 'Table'.
IF SY-SUBRC = 0.
WRITE: / 'AEDAT:', INDX-AEDAT,
 / 'USERA:', INDX-USERA,
 / 'PGMID:', INDX-PGMID.
WRITE / 'Directory:'.
LOOP AT DIRTAB.
 WRITE: / DIRTAB-NAME, DIRTAB-OTYPE, DIRTAB-FTYPE,
 DIRTAB-TFILL, DIRTAB-FLENG.
ENDLOOP.
ELSE.
WRITE 'Not found'.
ENDIF.
*******run this program and see the result.
Hope this documentation will give you an idea of data cluster.
if useful, do reward with the points.
Regards,
Kunal.

Can anyone give a good contact number for someone in the upper level of customer service

can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.

Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Can anyone give a brief intro and sample of how to use semaphore & it concept

Similar Messages

Maybe you are looking for