Can anyone give ex's for poolled and cluster and transparent tables
Hi ,
Can u help me by providing ex's for poolled and cluster and transparent tables
Hi,
Following are the examples for each type.
Transparent table - VBAK.
Cluster Table -BSEG
Pooled Table - KAPOL
Regards,
Ankur Parab
Similar Messages
-
Can anyone give me an example of direct, queued and unserialized delta?
hi all,
Can anyone give me an example of direct, queued and unserialized delta for fi and sd applications.
thanxs in advance
regds
harihi,
Update Methods,
a.1: (Serialized) V3 Update
b. Direct Delta
c. Queued Delta
d. Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
a. Update methods: (serialized) V3
Transaction data is collected in the R/3 update tables
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
V2 Update errors can lead to V3 updates never to be processed
Update methods: direct delta
Each document posting is directly transferred into the BW delta queue
Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
Update methods: queued delta
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
Update methods: Un-serialized V3
Extraction data for written as before into the update tables with a V3 update module
V3 collective run transfers the data to BW Delta queue
In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
V2 update has to be successful
hope it helps
partha -
Can anyone give an example for 'PUT' method.
Can anyone give an example for 'PUT' method ?
Unable to find an examples for this in the forum
Thanks
ChandranHi Chandran,
Check link below:
RESRful POST method
Resource Templates : Strategy for dealing with PUT and POST
HTH
Zack -
Can anyone give a solution for this ???
Hi all,
In upload and download function modules we will get One Pop-Up in that we have File Name and Data Format Options.
But we are in Upgrade Project (ecc 6.0). So, we are not Using the Upload or Download FM.
Instead of that we are using
For Upload
CALL METHOD cl_gui_frontend_services=>file_open_dialog and
CALL METHOD cl_gui_frontend_services=>gui_upload
For Download
CALL METHOD cl_gui_frontend_services=>file_save_dialog
CALL METHOD cl_gui_frontend_services=>Gui_download
But problem is ..Client is Requiring the Pop-Up for Data Format in new methods.
How can we get the Popup for the same ??
Please reply ASAP.
Thanks in advance
HariramHi
Refer this code
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-004.
PARAMETERS : p_flint LIKE filename-fileintern
DEFAULT 'ZDIR_APPDATA', " Logical Path Name
p_aserv RADIOBUTTON GROUP grp, " Application server
p_flext LIKE filename-fileextern, " Application File Name
p_pserv RADIOBUTTON GROUP grp, " Presentation Server
p_file1 LIKE rlgrap-filename, " Presentation File Name
p_file2 LIKE rlgrap-filename, " Error File Name
p_sesnm LIKE bgr00-group
DEFAULT 'ZPTPCNV110'. " Session Name
SELECTION-SCREEN : END OF BLOCK b1.
FORM getfilename1 CHANGING p_file1 TYPE rlgrap-filename.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = sy-cprog
dynpro_number = sy-dynnr
IMPORTING
file_name = p_file1.
ENDFORM. " getfilename1
Regards,
Prashant -
I have an early 2011 MBP running Mountain Lion. I just removed the superdrive and added an SSD. I want to use it to boot from and also run Photoshop and Lightroom from. Can anyone recommend a process for moving my OS and those programs to the SSD?
I'm assuming your doing this because of data you don't want pernament on the SSD as they can' be scrubbed like hard drives can.
Disconnect any other drives.
1: Format the SSD 1 partition, click the box, option GUID and OS X extended journaled as the format.
2: Download Carbon Copy Cloner.
3: Clone your MacintoshHD partition to a blank powered external drive also formatted the same as above.
4: Hold option/alt key and boot the machine (wired or built in keyboard) and then select the clone to boot from,
5: Once in the clone, click it's drive name and change the name if it's the same as the OS X boot volume.
6: On the clone, head to System Preferences > Accounts and create a new Admin account.
7: If you need to move files between accounts on the clone, see this. Combine two+ Users Accounts on the same machine (be careful that your selecting the correct clones other account)
8: Once your moving files on the clone is complete, then log into the new user account and delete the old user account.
9: Use Carbon Copy Cloner to clone the clone to the SSD.
10: Use Disk Utiltiy to repair permissions on all drives.
The SSD should be moved to the HD slot and the HD to the optical slot and used as a file drive.
CCC has a option to not include certain folders like the other user account you don't want, however I tend not to recommend things that are not too far out of line with Apple's ways of doing things as it usually results in bad things occuring. Somewhere in OS X it's recorded of that other user account, so it might still show up in logins and such.
Also you may want to transfer some files to the other account, so that's why I recommend this method.
Good Luck -
Can anyone give a good contact number for someone in the upper level of customer service
can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.
Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give me user exit name for create/update purchase order partners
Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.hi,
check these exits.
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number -
I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
Cheers, Tom -
Can anyone give a good contact number for someone in the upper level of customer care
Duplicate post - please see:
can anyone give a good contact number for someone in the upper level of customer service
Message was edited by: Admin ModeratorHello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give me some documents for data cluster
Hi,
can anyone give me some documents for data cluster?
ths!
regards!Hi ,
The following is a documentation on the <b>Data Cluster</b>:
<b>Data clusters</b> are specific to ABAP. Although it is possible to read a cluster database using SQL statements, only ABAP can interpret the structure of the data cluster.
You can store <b>data clusters</b> in special databases in the ABAP Dictionary. These are called ABAP cluster databases, and have a prescribed structure:
<u><b>Cluster Databases</b></u> ( I have explained the cluster databse below )
This method allows you to store complex data objects with deep structures in a single step, without having to adjust them to conform to the flat structure of a relational database. Your data objects are then available systemwide to every user. To read these objects from the database successfully, you must know their data types.
You can use cluster databases to store the results of analyses of data from the relational database. For example, if you want to create a list of your customers with the highest revenue, or an address list from the personnel data of all of your branches, you can write ABAP programs to generate the list and store it as a data cluster. To update the <b>data cluster</b>, you can schedule the program to run periodically as a background job. You can then write other programs that read from the data cluster and work with the results. This method can considerable reduce the response time of your system, since it means that you do not have to access the distributed data in the relational database tables each time you want to look at your list.
<b>Cluster Database :</b>
Cluster databases are special relational databases in the ABAP Dictionary that you can use to store data clusters. Their line structure is divided into a standard section, containing several fields, and one large field for the <b>data cluster.</b>
<b>Creating a Directory of a Data Cluster</b>
To create a directory of a data cluster from an ABAP cluster database, use the following statement:
Syntax
<b>IMPORT DIRECTORY INTO <dirtab>
FROM DATABASE <dbtab>(<ar>)
[CLIENT <cli>] ID <key>.</b>
This creates a directory of the data objects belonging to a data cluster in the database <dbtab> in the internal table <dirtab>. You must declare <dbtab> using a TABLES statement.
To save a <b>data cluster</b> in a database, use the <b>EXPORT TO DATABASE</b> statement .
For <ar>, enter the two-character area ID for the cluster in the database. The name <key> identifies the data in the database. Its maximum length depends on the length of the name field in <dbtab>. The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
The IMPORT statement also reads the contents of the user fields from the database table.
If the system is able to create a directory, SY-SUBRC is set to 0, otherwise to 4.
The <b>internal table</b> <dirtab> must have the ABAP Dictionary structure CDIR.
<b>******** Sample Program illustrating the data cluster .</b>
PROGRAM Zdata_cluster.
TABLES INDX.
******to save data objects in cluster databases
DATA: BEGIN OF ITAB OCCURS 100,
COL1 TYPE I,
COL2 TYPE I,
END OF ITAB.
DO 3000 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
APPEND ITAB.
ENDDO.
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
INDX-PGMID = SY-REPID.
EXPORT ITAB TO DATABASE INDX(HK) ID 'Table'.
WRITE: ' SRTF2',
AT 20 'AEDAT',
AT 35 'USERA',
AT 50 'PGMID'.
ULINE.
SELECT * FROM INDX WHERE RELID = 'HK'
AND SRTFD = 'Table'.
WRITE: / INDX-SRTF2 UNDER 'SRTF2',
INDX-AEDAT UNDER 'AEDAT',
INDX-USERA UNDER 'USERA',
INDX-PGMID UNDER 'PGMID'.
ENDSELECT.
****To create a directory of a data cluster from an ABAP ****cluster database
DATA DIRTAB LIKE CDIR OCCURS 10 WITH HEADER LINE.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE
INDX(HK) ID 'Table'.
IF SY-SUBRC = 0.
WRITE: / 'AEDAT:', INDX-AEDAT,
/ 'USERA:', INDX-USERA,
/ 'PGMID:', INDX-PGMID.
WRITE / 'Directory:'.
LOOP AT DIRTAB.
WRITE: / DIRTAB-NAME, DIRTAB-OTYPE, DIRTAB-FTYPE,
DIRTAB-TFILL, DIRTAB-FLENG.
ENDLOOP.
ELSE.
WRITE 'Not found'.
ENDIF.
*******run this program and see the result.
Hope this documentation will give you an idea of data cluster.
if useful, do reward with the points.
Regards,
Kunal. -
Can anyone give me an example for crm_svy_..._pai?
Hi all, I have a survey, there are several questions. After I input the answers, I click the 'CHECK' button, I will check the answers. There will be different response to my answers. If the answer is not correct, I will post an error message.
And I also need to retrieve data from tables to fill the blank.
I am a beginner for CRM survey, can anyone help me? I create a FM:crm_svy_..._pai, and code in it right? But how can I do it?
Can anyone give me an example for crm_svy_..._pai to do what I need?
Many many thanks in advance!!
Heare is an example, but I don't its function and how does it work..
read table lt_all_values into ls_value
with key answer_id = 'get_value'.
if sy-subrc = 0.
data: lt_values type crm_svy_api_string_t.
append ls_value-value to lt_values.
call method ir_survey_values->values_set
exporting
i_question_id = 'set_value'
i_answer_id = 'set_value'
it_values = lt_values.
endif.Hi Yu,
Could you tell how you solved your issue?
Regards and tx in advance,
Mon -
I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?
Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller -
Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer
Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer
It's possible Brother may provide updates to their printers to make them AirPrint capable or provide app for printing; search the iTunes Store or look to the support resources for your model of printer. For other printers, you can route the printing through your computer. If you have a Mac, Printopia might be worth a look:
http://www.ecamm.com/mac/printopia/
If you have a Windows system, search the web for something like "airprint Windows hack" and you'll find instructions on enabling printing.
Another option is an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
Regards. -
i have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls
You will have to ask Vodafone to do it for you.
Here is a link to their online form http://campaigns.vodafone.co.uk/UnlockCodeRequestForm/ -
Can anyone give me a contact email for Apple Customer services?
I would rather not rant on here!Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.
Maybe you are looking for
-
Why does Shock Wave keep crashing? Only crashes on Firefox browser.
Every time I use Firefox browser, I get the error message: "Shockwave Flash is either busy or it may have stopped responding. You can stop the plug in now, or wait to see if the plug in will complete." I also get another one saying that the "Silverli
-
Formula claculation in query is not summing correctly when details are remo
have a report that totals 2 columns together and is at the work center level. when I remove the details the totals are wrong but when I show them it comes over correctly. Here is the scenario work center column a column b sum a+b XXX 2 2 4 the detail
-
Applying color to the line in a linechart while using a JFreeChart
hi I had created a line chart using a JFreeChart.It had given its default color to the line,I want to modify the color of the line.How should i do it?
-
Problem when sales order printing
Hi Experts, when i am printing the sales order for cancellation .The following status message came. Message no. VF 302 : No output has been selected for printing. Already i given output type also for that SO. could you tell me what is problem. Regard
-
STO- Depot to Plant with Transfer of cenvat credit
Dear All, I am having a scenario in which i am procuring capital material for depot and it lies in depot. Now the material is no use in depot and i want to transfer that material from depot to manufacturing Plant. and want to take the cenvat credit i