Can anyone give me a LabView program to do impedance spectroscopy (capacitance-frequency) with a HP4284 LRC interfaced to a probe station?

I am trying to measure the frequency dependent dielectric function of some polymer systems.  Our group has a HP4284 LCR meter interfaced to a probe station, however we lack the LabView code to perform frequency dependent capacitance measurements (i.e. electrical impedance spectroscopy).  Any help is much appreciated.  Cheers!
-Kwami

First, study the manual and learn how to do a measurement manually. Then, download the driver (LabVIEW Tools>Instrumenation>Find Instrument Drivers), install the project style driver. Next, look at the LabVIEW examples for it (Help>Find Examples>Hardware Input and Output>Instrument Drivers>LabVIEW Plug and Play). Study the functions in the driver with Context Help turned on. Look at the block diagrams to see what commands in the manual each function implements. Decide which functions/commands are necessary to duplicate your manual test.

Similar Messages

  • Can anyone help me in Labview Program

    Hello All,Iam a begginer and I have a question in finishing a task.
    Here is it...
    Consider some binary numbers such as.. 11010010101010001001110101010101001010....
    1.Now my first task is to group it into two 11 01 00 10 10 10 10 00 10...and so on..
    2.then I have to take only good pairs such as 01 and 10..
    If it is 01,I have to change it as 1,and if it is 10 i have to change it as 0.the other two pairs 11 and 00 should be omitted.
    please help me out.
    thanks in advance

    The solution with boolean array as input and output.
    You wrote that there are millions of numbers. This solution has one disadvantage. The execution time and memory needs will increase overproportional with the length of the array. The reason is that the size of the output array is not know before entering the For loop. The build array function needs to allocate new memory when new numbers are added. And the old array will be copied.
    To avoid this you can use a second For loop counting the cases when a number will be used. Copy the existing For loop. Initialize the shift register with a U32 and value 0. Replace the Build Array function by a increment. Replace the Array constant with the boolean by a Build Array function. In the second For loop replace the Build Array function in the Case structre by a Replace Array element. If you have the array initialzed with FALSE you need to do this only in the case when you want it to set it to TRUE. You need to count as in the first loop to know which element in the array will be replaced.Message Edited by waldemar.hersacher on 06-05-2005 12:11 AM
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions
    Attachments:
    Binary decimate.vi ‏31 KB
    Binary decimate opt.vi ‏44 KB

  • Can anyone give me user exit name for create/update purchase order partners

    Hello guys
      Can anyone gives me user exit name for create/update purchase order partners?
      Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N)  by using user exit.

    hi,
    check these exits.
    Transaction Code - ME21N                    Create Purchase Order
    Enhancement/ Business Add-in            Description
    Enhancement
    MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
    MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
    MM06E001                                User exits for EDI inbound and outbound purchasing documents
    MM06E003                                Number range and document number
    MM06E004                                Control import data screens in purchase order
    MM06E005                                Customer fields in purchasing document
    MM06E007                                Change document for requisitions upon conversion into PO
    MM06E008                                Monitoring of contr. target value in case of release orders
    MM06E009                                Relevant texts for "Texts exist" indicator
    MM06E010                                Field selection for vendor address
    MMAL0001                                ALE source list distribution: Outbound processing
    MMAL0002                                ALE source list distribution: Inbound processing
    MMAL0003                                ALE purcasing info record distribution: Outbound processing
    MMAL0004                                ALE purchasing info record distribution: Inbound processing
    MMDA0001                                Default delivery addresses
    MMFAB001                                User exit for generation of release order
    MRFLB001                                Control Items for Contract Release Order
    MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
    AMPL0001                                User subscreen for additional data on AMPL
    LMEDR001                                Enhancements to print program
    LMELA002                                Adopt batch no. from shipping notification when posting a GR
    LMELA010                                Inbound shipping notification: Transfer item data from IDOC
    LMEQR001                                User exit for source determination
    LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001                                Customer-Specific Source Determination in Retail
    M06B0001                                Role determination for purchase requisition release
    M06B0002                                Changes to comm. structure for purchase requisition release
    MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
    MEETA001                                Define schedule line type (backlog, immed. req., preview)
    ME590001                                Grouping of requsitions for PO split in ME59
    M06E0005                                Role determination for release of purchasing documents
    M06E0004                                Changes to communication structure for release purch. doc.
    M06B0005                                Changes to comm. structure for overall release of requisn.
    M06B0004                                Number range and document number
    M06B0003                                Number range and document number

  • Can anyone give me some documents for data cluster

    Hi,
    can anyone give me some documents for data cluster?
    ths!
    regards!

    Hi ,
    The following is a documentation on the <b>Data Cluster</b>:
    <b>Data clusters</b> are specific to ABAP. Although it is possible to read a cluster database using SQL statements, only ABAP can interpret the structure of the data cluster.
    You can store <b>data clusters</b> in special databases in the ABAP Dictionary. These are called ABAP cluster databases, and have a prescribed structure:
    <u><b>Cluster Databases</b></u> ( I have explained the cluster databse below )
    This method allows you to store complex data objects with deep structures in a single step, without having to adjust them to conform to the flat structure of a relational database. Your data objects are then available systemwide to every user. To read these objects from the database successfully, you must know their data types.
    You can use cluster databases to store the results of analyses of data from the relational database. For example, if you want to create a list of your customers with the highest revenue, or an address list from the personnel data of all of your branches, you can write ABAP programs to generate the list and store it as a data cluster. To update the <b>data cluster</b>, you can schedule the program to run periodically as a background job. You can then write other programs that read from the data cluster and work with the results. This method can considerable reduce the response time of your system, since it means that you do not have to access the distributed data in the relational database tables each time you want to look at your list.
    <b>Cluster Database :</b>
                    Cluster databases are special relational databases in the ABAP Dictionary that you can use to store data clusters. Their line structure is divided into a standard section, containing several fields, and one large field for the <b>data cluster.</b>
    <b>Creating a Directory of a Data Cluster</b>
    To create a directory of a data cluster from an ABAP cluster database, use the following statement:
    Syntax
    <b>IMPORT DIRECTORY INTO <dirtab>
                     FROM DATABASE <dbtab>(<ar>)
                     [CLIENT <cli>] ID <key>.</b>
    This creates a directory of the data objects belonging to a data cluster in the database <dbtab> in the internal table <dirtab>. You must declare <dbtab> using a TABLES statement.
    To save a <b>data cluster</b> in a database, use the <b>EXPORT TO DATABASE</b> statement .
    For <ar>, enter the two-character area ID for the cluster in the database. The name <key> identifies the data in the database. Its maximum length depends on the length of the name field in <dbtab>. The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
    The IMPORT statement also reads the contents of the user fields from the database table.
    If the system is able to create a directory, SY-SUBRC is set to 0, otherwise to 4.
    The <b>internal table</b> <dirtab> must have the ABAP Dictionary structure CDIR.
    <b>******** Sample Program illustrating the data cluster .</b>
    PROGRAM Zdata_cluster.
    TABLES INDX.
    ******to save data objects in cluster databases
    DATA: BEGIN OF ITAB OCCURS 100,
            COL1 TYPE I,
            COL2 TYPE I,
          END OF ITAB.
    DO 3000 TIMES.
      ITAB-COL1 = SY-INDEX.
      ITAB-COL2 = SY-INDEX ** 2.
      APPEND ITAB.
    ENDDO.
    INDX-AEDAT = SY-DATUM.
    INDX-USERA = SY-UNAME.
    INDX-PGMID = SY-REPID.
    EXPORT ITAB TO DATABASE INDX(HK) ID 'Table'.
    WRITE: '    SRTF2',
         AT 20 'AEDAT',
         AT 35 'USERA',
         AT 50 'PGMID'.
    ULINE.
    SELECT * FROM INDX WHERE RELID = 'HK'
                       AND   SRTFD = 'Table'.
      WRITE: / INDX-SRTF2 UNDER 'SRTF2',
               INDX-AEDAT UNDER 'AEDAT',
               INDX-USERA UNDER 'USERA',
               INDX-PGMID UNDER 'PGMID'.
    ENDSELECT.
    ****To create a directory of a data cluster from an ABAP ****cluster database
    DATA DIRTAB LIKE CDIR OCCURS 10 WITH HEADER LINE.
    IMPORT DIRECTORY INTO DIRTAB FROM DATABASE
                                      INDX(HK) ID 'Table'.
    IF SY-SUBRC = 0.
      WRITE: / 'AEDAT:', INDX-AEDAT,
             / 'USERA:', INDX-USERA,
             / 'PGMID:', INDX-PGMID.
      WRITE  / 'Directory:'.
      LOOP AT DIRTAB.
        WRITE: / DIRTAB-NAME,  DIRTAB-OTYPE, DIRTAB-FTYPE,
                 DIRTAB-TFILL, DIRTAB-FLENG.
      ENDLOOP.
    ELSE.
      WRITE 'Not found'.
    ENDIF.
    *******run this program and see the result.
    Hope this documentation will give you an idea of data cluster.
    if useful, do reward with the points.
    Regards,
    Kunal.

  • Can anyone give some good sources to get placement papers of adobe.

    can anyone give some good sources to get placement papers of adobe.idk is it right place to ask

    adobe placement papers are based on c programming.to clear adobe placement u need strong deep concepts of c programming following are some good sources for placement papers and c programming tutorials.
    for placement
    http://www.placementpapers.in
    http://freshersworld.com
    for c programming
    http://www.miniwiki.tk/c/index.htm
    http://visualcplus.blogspot.com

  • Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

    Dear All
    Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
    Many thanks

    Click here for options.
    (69081)

  • When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

    when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

    First thing i would try is to use another cable if available.

  • Can anyone give a good contact number for someone in the upper level of customer service

    can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.

        Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Im traveling to New York in a few months and considering buying the new iPad while im there. Can anyone give me advice on what i need to buy while im there so as to be able to use to use it back here in the UK?? Any advice is much appreciated.

    Im  travelling to New York soon and consrdering buying a iPad while out there. Can anyone give me advice what i need to buythanks.
    to allow me to use it back here in the UK?? Many thanks
    Mark th

    Buy the "AT&T" model iPad, not the Verizon one (which does not support SIM cards used most everywhere in the world).  The ATT model comes with a SIM card, but you can then get one from a UK provider.  Be sure it's a "microSIM" card, not the larger kind when back in the UK.

  • I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

    I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
    Solved!
    Go to Solution.

     Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
     Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
     You can find more details about this issue in this KB:
    KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
    And for keeping a copy here is more info:
     How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

    Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

    Google "lightroom 5.6" and direct links to both Mac and Windows will be at the top.

  • I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

    I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    http://support.apple.com/kb/ht4108
     Cheers, Tom

  • Can anyone give a good contact number for someone in the upper level of customer care

    Duplicate post - please see:
    can anyone give a good contact number for someone in the upper level of customer service
    Message was edited by: Admin Moderator

        Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Can anyone give me the process flow for MTBF report?

    hi all
        can anyone give me the process flow of MTBF Report?
    regards
    asha

    And Full form of MTBF is ???
    Regards
    Amitava

  • Can anyone give me an example for crm_svy_..._pai?

    Hi all, I have a survey, there are several questions. After I input the answers, I click the 'CHECK' button, I will check the answers. There will be different response to my answers. If the answer is not correct, I will post an error message.
    And I also need to retrieve data from tables to fill the blank.
    I am a beginner for CRM survey, can anyone help me? I create a FM:crm_svy_..._pai, and code in it right? But how can I do it?
    Can anyone give me an example for crm_svy_..._pai to do what I need?
    Many many thanks in advance!! 
    Heare is an example, but I don't its function and how does it work..
      read table lt_all_values into ls_value
                               with key answer_id = 'get_value'.
      if sy-subrc = 0.
        data: lt_values type crm_svy_api_string_t.
        append ls_value-value to lt_values.
        call method ir_survey_values->values_set
          exporting
            i_question_id = 'set_value'
            i_answer_id   = 'set_value'
            it_values     = lt_values.
      endif.

    Hi Yu,
    Could you tell how you solved your issue?
    Regards and tx in advance,
    Mon

Maybe you are looking for

  • NIO verses IO

    Hi All, I am using java NIO socketchannel and ByteBuffers for my client/Server communication. It is in blocking mode and single threaded. Problem Description: From the results it seems that my NIO program is taking more time than old java io. It look

  • NullPointerException at sun.applet.AppletPanel.findAppletJDKLevel

    Hi, we have a online HTML page containing an <applet> and different <iframe> definitions. By clicking a HTML link or calling Applet.getAppletContext().showDocument(), other HTML pages containing other applets are loaded into the referenced frame. All

  • Cannot open pages with shockwave popup

    SAFARI for iPOD... ipod safari cannot open page if the main page opens shockwave(macromedia or flashy) popup.. I have tried enabling popup on ipod but it didn't help.. Can someone tell me how to bypass that.. the webpage is epaper.timesofindia.com ..

  • Omniportlet: ServletError

    The Omniportlet works fine when I ask it to render tables, but when it comes to defining charts I receive an Internal Server Error when clicking on the Layout tab. The application log says: java.lang.NoClassDefFoundError: oracle/dss/dataView/Model I

  • AHHHHHH! Multiple open file chooser windows

    Ok, I am going nuts here. I have figured out the problem of getting the data to appear on the same frame that I originally open. The menu at the top has File -> Open. When the user first comes into the form, that is the only thing enabled. I am using