Can anyone give me step by step directions to putting dvds to ipods?
I'm needing help to put convert dvds and then putting it into my video ipod. I just tried with Videora but it only converted 20 minutes of the movie mean girls.
There are many "flavors" of DVD material. I have some converted 8mm film that was later converted to MPEG-1 and then to DVD (MPEG-2).
If you don't own the rights to the material (copy rights) the distribution of software, or methods of circumvention, are illegal in the U.S.
Sharing this (freely available) tips and tricks of conversion can also land some people into law issues they don't wan't.
Just because you "purchased" a movie on DVD doesn't give you the right to convert it to other formats.
Let the lawyers now chime in.
Similar Messages
-
Can anyone give me an example of direct, queued and unserialized delta?
hi all,
Can anyone give me an example of direct, queued and unserialized delta for fi and sd applications.
thanxs in advance
regds
harihi,
Update Methods,
a.1: (Serialized) V3 Update
b. Direct Delta
c. Queued Delta
d. Un-serialized V3 Update
Note: Before PI Release 2002.1 the only update method available was V3 Update. As of PI 2002.1 three new update methods are available because the V3 update could lead to inconsistencies under certain circumstances. As of PI 2003.1 the old V3 update will not be supported anymore.
a. Update methods: (serialized) V3
Transaction data is collected in the R/3 update tables
Data in the update tables is transferred through a periodic update process to BW Delta queue
Delta loads from BW retrieve the data from this BW Delta queue
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Issues:
Even though it says serialized , Correct sequence of extraction data cannot be guaranteed
V2 Update errors can lead to V3 updates never to be processed
Update methods: direct delta
Each document posting is directly transferred into the BW delta queue
Each document posting with delta extraction leads to exactly one LUW in the respective BW delta queues
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Less monitoring overhead of update data or extraction queue
Cons:
Not suitable for environments with high number of document changes
Setup and delta initialization have to be executed successfully before document postings are resumed
V1 is more heavily burdened
Update methods: queued delta
Extraction data is collected for the affected application in an extraction queue
Collective run as usual for transferring data into the BW delta queue
Transaction postings lead to:
1. Records in transaction tables and in extraction queue
2. A periodically scheduled job transfers these postings into the BW delta queue
3. This BW Delta queue is read when a delta load is executed.
Pros:
Extraction is independent of V2 update
Suitable for environments with high number of document changes
Writing to extraction queue is within V1-update: this ensures correct serialization
Downtime is reduced to running the setup
Cons:
V1 is more heavily burdened compared to V3
Administrative overhead of extraction queue
Update methods: Un-serialized V3
Extraction data for written as before into the update tables with a V3 update module
V3 collective run transfers the data to BW Delta queue
In contrast to serialized V3, the data in the updating collective run is without regard to sequence from the update tables
Transaction postings lead to:
1. Records in transaction tables and in update tables
2. A periodically scheduled job transfers these postings into the BW delta queue
3.This BW Delta queue is read when a delta load is executed.
Issues:
Only suitable for data target design for which correct sequence of changes is not important e.g. Material Movements
V2 update has to be successful
hope it helps
partha -
I am trying to retrieve my photos from my I phone 4s because the screen is smashed. The pc that I use is windows not an apple computer. Can anyone give me step by step instructions how I can get my photos? Also, I don't have icloud
If the iPhone is still working and the photos are in the Camera Roll (i.e., taken on the iPhone) then, when you connect the iPhone to your PC, it should be recognized as a Camera and Windows should start AutoPlay.
See this http://windows.microsoft.com/en-us/windows/get-pictures-camera-computer#1TC=wind ows-7 -
Can anyone give me step by step for calling FM from one SAP to another SAP
can anyone give me step by step for calling FM from one SAP to another SAP
points will be rewarded,
thank you,
Regards,
Jagrut BharatKumar Shukla*& Report RFC_FOR_CUSTOMER_LIST
*& RFC to a Fn. module from another system which implements BAPI
REPORT rfc_for_customer_list.
DATA:
fl_status TYPE i.
DATA:
fs_message TYPE bapiret2.
DATA:
BEGIN OF fs_customers,
id TYPE s_customer,
name TYPE s_custname,
END OF fs_customers.
DATA:
t_customers LIKE
STANDARD TABLE
OF fs_customers.
CALL FUNCTION 'Z_BAPI_GET_CUSTOMER_LIST' DESTINATION 'R3N'
IMPORTING
return = fs_message
TABLES
customerlist = t_customers.
IF sy-subrc EQ 0.
fl_status = 1.
LOOP AT t_customers INTO fs_customers.
WRITE:
/10 fs_customers-id,
30 fs_customers-name.
AT LAST.
WRITE:
/,/5 'No of customers in R3N = ', sy-tabix.
ENDAT.
ENDLOOP.
ELSE.
MESSAGE 'RFC failed' TYPE 'S'.
EXIT.
ENDIF.
TOP-OF-PAGE EVENT *
TOP-OF-PAGE.
IF fl_status NE 0.
WRITE:
/12 'ID' COLOR 6,
32 'NAME' COLOR 6.
SKIP.
ENDIF.
This is one small example...
Regards,
Pavan -
I want to move my iPhoto from my internal hard drive to an external hard drive to free up space. Can it be moved entirely and function the same as before with all features and the software itself on the hard drive? Also, can anyone give step by step instructions on how to do this? I'm having a difficult time figuring this out on my own by trying to search through Apple support.
Oops...
Here you go...
iPhoto: How to move the Library to an EHD
Make sure that the EXT Drive is formatted as Mac OS Extended (journaled).
That's what iPhoto Likes... -
Having trouble connecting blutooth on my laptop. Devices are paired but it says "not connected". I've gone thru System Pref. with no luck. Can anyone give me step by step help to reconnect BLUETOOTH? plz, ty
Hi:
There are no dumb questions...answers, yes, but not questions. Sometime I use acronyms and forget that I should explain things a bit more.
Resetting those two things sometimes helps and cannot hurt.
SMC=system management controller:
http://support.apple.com/kb/HT3964
PRAM=parameter random-access memory:
http://support.apple.com/kb/PH4405
If that does not help, delete the phone from your computer (system preferences>Bluetooth), restart, and then add it back in:
http://support.apple.com/kb/PH3660
Barry
P.S. If everything fails and you are near an Apple store, make an appointment with a "genius" and take the devices in for them to assist. -
Editing a scanned document in Adobe Pro XI but need to edit an image on the document with Photoshop. Can anyone give me step by step instructions, please? I am desperate.
chef gilly wrote:
Yes sir! If you tell me how to do that.
When replying, click the camera icon above the reply box. Then click "choose file" and choose your file. Etc. -
Can anyone plz tell me the steps for performance tuning.
hello friends
what is performance tuning?
can anyone plz tell me the steps for performance tuning.Hi Kishore, this will help u.
Following are the different tools provided by SAP for performance analysis of an ABAP object
Run time analysis transaction SE30
This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05
The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on the SPFLI table in our test program is mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Need for performance tuning
In this world of SAP programming, ABAP is the universal language. In most of the projects, the focus is on getting a team of ABAP programmers as soon as possible, handing over the technical specifications to them and asking them to churn out the ABAP programs within the given deadlines.
Often due to this pressure of schedules and deliveries, the main focus of making a efficient program takes a back seat. An efficient ABAP program is one which delivers the required output to the user in a finite time as per the complexity of the program, rather than hearing the comment I put the program to run, have my lunch and come back to check the results.
Leaving aside the hyperbole, a performance optimized ABAP program saves the time of the end user, thus increasing the productivity of the user, and in turn keeping the user and the management happy.
This tutorial focuses on presenting various performance tuning tips and tricks to make the ABAP programs efficient in doing their work. This tutorial also assumes that the reader is well versed in all the concepts and syntax of ABAP programming.
Use of selection criteria
Instead of selecting all the data and doing the processing during the selection, it is advisable to restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code.
Not recommended
Select * from zflight.
Check : zflight-airln = LF and zflight-fligh = BW222.
Endselect.
Recommended
Select * from zflight where airln = LF and fligh = 222.
Endselect.
One more point to be noted here is of the select *. Often this is a lazy coding practice. When a programmer gives select * even if one or two fields are to be selected, this can significantly slow the program and put unnecessary load on the entire system. When the application server sends this request to the database server, and the database server has to pass on the entire structure for each row back to the application server. This consumes both CPU and networking resources, especially for large structures.
Thus it is advisable to select only those fields that are needed, so that the database server passes only a small amount of data back.
Also it is advisable to avoid selecting the data fields into local variables as this also puts unnecessary load on the server. Instead attempt must be made to select the fields into an internal table.
Use of aggregate functions
Use the already provided aggregate functions, instead of finding out the minimum/maximum values using ABAP code.
Not recommended
Maxnu = 0.
Select * from zflight where airln = LF and cntry = IN.
Check zflight-fligh > maxnu.
Maxnu = zflight-fligh.
Endselect.
Recommended
Select max( fligh ) from zflight into maxnu where airln = LF and cntry = IN.
The other aggregate functions that can be used are min (to find the minimum value), avg (to find the average of a Data interval), sum (to add up a data interval) and count (counting the lines in a data selection).
Use of Views instead of base tables
Many times ABAP programmers deal with base tables and nested selects. Instead it is always advisable to see whether there is any view provided by SAP on those base tables, so that the data can be filtered out directly, rather than specially coding for it.
Not recommended
Select * from zcntry where cntry like IN%.
Select single * from zflight where cntry = zcntry-cntry and airln = LF.
Endselect.
Recommended
Select * from zcnfl where cntry like IN% and airln = LF.
Endselect.
Check this links
http://www.sapdevelopment.co.uk/perform/performhome.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/afbad390-0201-0010-daa4-9ef0168d41b6
kindly reward if found helpful.
cheers,
Hema. -
Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?
Google "lightroom 5.6" and direct links to both Mac and Windows will be at the top.
-
I'm trying to delete multiple pix in iPhoto that i stupidly made duplicates of without knowing, I've tried going into the applications folder and using image capture but i think I've missed a step , can anyone send the correct info / steps pls thanks
again image capture is not involved with deleting photos from iPhoto in any way ever
the paid version of iPhoto Library Manager is very good for finding duplicates as is Duplicate Annihilator
And I have no idea who told you this - or what it means - but re-read both of my opening statements
I was told I could delete multpiles thru image capture by transferring my iPhoto library etc
LN -
Pretty basic this, but I'm a beginner. Can anyone tell me (in simple steps!) how I burn a movie I bought in imovies onto a DVD? After I stick the DVD in, what happens then? Do I have to be in my itunes library first? Sorry about the unsophisticated question. Thanks!
Hello Jackie! (My brother lives in Brussels!)
You may find these helpful:
iMovie tutorials:
http://www.apple.com/ilife/tutorials/#imovie
and also this:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
A good guide to iDVD 7 can be found here:
http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
Apple's tutorial on iDVD 07/08 is here:
http://manuals.info.apple.com/en/idvd_08_getting_started.pdf -
Can anyone let me know the step by step procedure for creating userexits?
Hi all,
can anyone let me know the step by step procedure for creating user exits? for any transaction code like mm01 or vd01. If you have any docs send it across to my email id : [email protected]
thanxs in advance
hariHi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
look in txn CMOD or SMOD, check enhancement 0VRF0001. It uses function module EXIT_SAPL0VRF_001. It is used to manipulate route determination for SD.
Here is the code
DATA: ls_xvbpa LIKE xvbpa,
lf_aland LIKE tvst-aland,
lf_azone LIKE tvst-azone,
lf_lland LIKE trolz-lland,
lf_lzone LIKE trolz-lzone,
ls_vbadr LIKE vbadr,
ls_xvbap LIKE xvbap,
ls_tvst LIKE tvst,
lv_route LIKE trolz-route.
LOOP AT xvbap INTO ls_xvbap.
IF NOT ls_xvbap-vstel IS INITIAL.
SELECT SINGLE * FROM tvst
INTO ls_tvst
WHERE vstel EQ ls_xvbap-vstel.
IF sy-subrc = 0.
lf_aland = ls_tvst-aland.
lf_azone = ls_tvst-azone.
ENDIF.
ENDIF.
READ TABLE xvbpa INTO ls_xvbpa WITH KEY vbeln = ls_xvbap-vbeln
posnr = ls_xvbap-posnr
parvw = 'Q1'.
IF sy-subrc = 0.
CALL FUNCTION 'SD_ADDRESS_GET'
EXPORTING
fif_address_number = ls_xvbpa-adrnr
IMPORTING
fes_address = ls_vbadr
EXCEPTIONS
address_not_found = 1
address_type_not_exists = 2
no_person_number = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
lf_lland = ls_vbadr-land1.
lf_lzone = ls_vbadr-lzone.
ENDIF.
ENDIF.
CALL FUNCTION 'SD_ROUTE_DETERMINATION'
EXPORTING
i_aland = lf_aland
i_azone = lf_azone
i_lland = lf_lland
i_lzone = lf_lzone
IMPORTING
e_route = lv_route
EXCEPTIONS
no_route_found = 1
departure_error = 2
destination_error = 3
invalid_generic_key = 4
customer_exit_error = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
ls_xvbap-route = lv_route.
MODIFY xvbap FROM ls_xvbap TRANSPORTING route.
ENDIF.
ENDLOOP.
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
<b>Reward points</b>
Regards -
Can anyone give a good contact number for someone in the upper level of customer service
can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.
Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give a good contact number for someone in the upper level of customer care
Duplicate post - please see:
can anyone give a good contact number for someone in the upper level of customer service
Message was edited by: Admin ModeratorHello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give me some documents for data cluster
Hi,
can anyone give me some documents for data cluster?
ths!
regards!Hi ,
The following is a documentation on the <b>Data Cluster</b>:
<b>Data clusters</b> are specific to ABAP. Although it is possible to read a cluster database using SQL statements, only ABAP can interpret the structure of the data cluster.
You can store <b>data clusters</b> in special databases in the ABAP Dictionary. These are called ABAP cluster databases, and have a prescribed structure:
<u><b>Cluster Databases</b></u> ( I have explained the cluster databse below )
This method allows you to store complex data objects with deep structures in a single step, without having to adjust them to conform to the flat structure of a relational database. Your data objects are then available systemwide to every user. To read these objects from the database successfully, you must know their data types.
You can use cluster databases to store the results of analyses of data from the relational database. For example, if you want to create a list of your customers with the highest revenue, or an address list from the personnel data of all of your branches, you can write ABAP programs to generate the list and store it as a data cluster. To update the <b>data cluster</b>, you can schedule the program to run periodically as a background job. You can then write other programs that read from the data cluster and work with the results. This method can considerable reduce the response time of your system, since it means that you do not have to access the distributed data in the relational database tables each time you want to look at your list.
<b>Cluster Database :</b>
Cluster databases are special relational databases in the ABAP Dictionary that you can use to store data clusters. Their line structure is divided into a standard section, containing several fields, and one large field for the <b>data cluster.</b>
<b>Creating a Directory of a Data Cluster</b>
To create a directory of a data cluster from an ABAP cluster database, use the following statement:
Syntax
<b>IMPORT DIRECTORY INTO <dirtab>
FROM DATABASE <dbtab>(<ar>)
[CLIENT <cli>] ID <key>.</b>
This creates a directory of the data objects belonging to a data cluster in the database <dbtab> in the internal table <dirtab>. You must declare <dbtab> using a TABLES statement.
To save a <b>data cluster</b> in a database, use the <b>EXPORT TO DATABASE</b> statement .
For <ar>, enter the two-character area ID for the cluster in the database. The name <key> identifies the data in the database. Its maximum length depends on the length of the name field in <dbtab>. The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
The IMPORT statement also reads the contents of the user fields from the database table.
If the system is able to create a directory, SY-SUBRC is set to 0, otherwise to 4.
The <b>internal table</b> <dirtab> must have the ABAP Dictionary structure CDIR.
<b>******** Sample Program illustrating the data cluster .</b>
PROGRAM Zdata_cluster.
TABLES INDX.
******to save data objects in cluster databases
DATA: BEGIN OF ITAB OCCURS 100,
COL1 TYPE I,
COL2 TYPE I,
END OF ITAB.
DO 3000 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
APPEND ITAB.
ENDDO.
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
INDX-PGMID = SY-REPID.
EXPORT ITAB TO DATABASE INDX(HK) ID 'Table'.
WRITE: ' SRTF2',
AT 20 'AEDAT',
AT 35 'USERA',
AT 50 'PGMID'.
ULINE.
SELECT * FROM INDX WHERE RELID = 'HK'
AND SRTFD = 'Table'.
WRITE: / INDX-SRTF2 UNDER 'SRTF2',
INDX-AEDAT UNDER 'AEDAT',
INDX-USERA UNDER 'USERA',
INDX-PGMID UNDER 'PGMID'.
ENDSELECT.
****To create a directory of a data cluster from an ABAP ****cluster database
DATA DIRTAB LIKE CDIR OCCURS 10 WITH HEADER LINE.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE
INDX(HK) ID 'Table'.
IF SY-SUBRC = 0.
WRITE: / 'AEDAT:', INDX-AEDAT,
/ 'USERA:', INDX-USERA,
/ 'PGMID:', INDX-PGMID.
WRITE / 'Directory:'.
LOOP AT DIRTAB.
WRITE: / DIRTAB-NAME, DIRTAB-OTYPE, DIRTAB-FTYPE,
DIRTAB-TFILL, DIRTAB-FLENG.
ENDLOOP.
ELSE.
WRITE 'Not found'.
ENDIF.
*******run this program and see the result.
Hope this documentation will give you an idea of data cluster.
if useful, do reward with the points.
Regards,
Kunal.
Maybe you are looking for
-
How to change table but don't touch SQL using it?
we have old_table (date, key, value1, value2, value3) where we have values on every key for every day values are changed very rarely, so we are considering to redesign table to slow changing dimension: new_table (date_start, date_end, key, value1, va
-
I recently installed iTunes after purchasing ipod touches for both of my sons. I tried to set up parental controls in iTunes, but when I click the lock to turn it on it requires me to enter a password for "Owner". I never set a password. Can someone
-
Creation & Assignment of Cost Center?
Hello Experts, I have done all the configuration in SAP HCM but I don't have any knowledge about Cost center. So please guide me how to create Cost Center? and with whom it should be assigned? Because at the time of hiring employee cost center is req
-
Mail has become very unstable with my Exchange account since installing Mountain Lion and I'd like to remove Mail and reinstall it. Can anyone provide directions on how to do so? Thanks, Brian
-
After reinstalling OS X Mavericks, iTunes doesn't recognize my photosphotos...
Hi, everybody, After formating my iMac and reinstalling OS X Mavericks, iTunes doesn't recognize my photos. They are there in iPhoto, but when I try to synch them with my iPhone, for example, iTunes shows the Events, but tell that they're empty (but