Can anyone give me the process flow for MTBF report?
hi all
can anyone give me the process flow of MTBF Report?
regards
asha
And Full form of MTBF is ???
Regards
Amitava
Similar Messages
-
Can anyone give a good contact number for someone in the upper level of customer service
can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.
Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give a good contact number for someone in the upper level of customer care
Duplicate post - please see:
can anyone give a good contact number for someone in the upper level of customer service
Message was edited by: Admin ModeratorHello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer
Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer
It's possible Brother may provide updates to their printers to make them AirPrint capable or provide app for printing; search the iTunes Store or look to the support resources for your model of printer. For other printers, you can route the printing through your computer. If you have a Mac, Printopia might be worth a look:
http://www.ecamm.com/mac/printopia/
If you have a Windows system, search the web for something like "airprint Windows hack" and you'll find instructions on enabling printing.
Another option is an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
Regards. -
Can anyone give me user exit name for create/update purchase order partners
Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.hi,
check these exits.
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number -
Can anyone tell me the naming conventions for PSa tables
hi all,
After the data is loaded into the psa. how to look at the records that are there in psa. And can anyone tell me the naming conventions for psa tables.
like BIC/????
thanxs in advance
regds
hariHi Hari,
You want to know the naming convention of PSA table. For that there is a simple technique try this.
Go to - T code SE11
In the database table check box give /BI* and click search
next window in the Description Text box give the r data source name(master) like
YIO_ID_ATTR which is assigned to infosource. then click OK.
then you get the psa table structure.
You can take structure and check in the T code SE 11
Hope this is fine.
Regards
Sreekanth -
Can anyone give me the latest 1z0-033 ( performance tuning ) testking
can anyone give me the latest 1z0-033 ( performance tuning ) testking.
send me at [email protected]
Asif Iqbal.
Software Engineer ( Karachi, Pakistan ).Asif Iqbal wrote:
can anyone give me the latest 1z0-033 ( performance tuning ) testking.
send me at [email protected]
Asif Iqbal.
Software Engineer ( Karachi, Pakistan ).Well, I hope you do know this that using these kinds of cheat sheets is actually not a very good way of preparing for the exam. If you have some doubts about the topic, bring it here and we can help.
PS: Its not a good idea to post your mail id over a public forum like this.
HTH
Aman.... -
Can anyone give me a bean class for JAVAMAIL, for using in JSP?
Can anyone give me a bean class for JAVAMAIL, for using in JSP?
I hate coding everything inside a jsp page!! Anyone out there who can help me out??hi
see my post in the javamail forum... here you can see a bean.. I'm trying to connect it with the mysql database - may you can help me -
Can anyone tell me the launch date for Apple ipad mini cellular in India...
Can anyone tell me the launch date for Apple ipad mini cellular in India...
I want Apple ipad mini Cellular in india. what should i do.
I am buying apple product for fist time. -
Can anyone say me the Configuration material for the ECC 6.0 FI/CO
Hi everybody
Can anyone say me the Configuration material for the ECC 6.0 FI/CO
thanks n regards
venuprasadHi
please refer
http://www.sap-img.com/
http://www.surya-padhi.net
hope this helps
pushkaraj -
Can anyone give me step by step for calling FM from one SAP to another SAP
can anyone give me step by step for calling FM from one SAP to another SAP
points will be rewarded,
thank you,
Regards,
Jagrut BharatKumar Shukla*& Report RFC_FOR_CUSTOMER_LIST
*& RFC to a Fn. module from another system which implements BAPI
REPORT rfc_for_customer_list.
DATA:
fl_status TYPE i.
DATA:
fs_message TYPE bapiret2.
DATA:
BEGIN OF fs_customers,
id TYPE s_customer,
name TYPE s_custname,
END OF fs_customers.
DATA:
t_customers LIKE
STANDARD TABLE
OF fs_customers.
CALL FUNCTION 'Z_BAPI_GET_CUSTOMER_LIST' DESTINATION 'R3N'
IMPORTING
return = fs_message
TABLES
customerlist = t_customers.
IF sy-subrc EQ 0.
fl_status = 1.
LOOP AT t_customers INTO fs_customers.
WRITE:
/10 fs_customers-id,
30 fs_customers-name.
AT LAST.
WRITE:
/,/5 'No of customers in R3N = ', sy-tabix.
ENDAT.
ENDLOOP.
ELSE.
MESSAGE 'RFC failed' TYPE 'S'.
EXIT.
ENDIF.
TOP-OF-PAGE EVENT *
TOP-OF-PAGE.
IF fl_status NE 0.
WRITE:
/12 'ID' COLOR 6,
32 'NAME' COLOR 6.
SKIP.
ENDIF.
This is one small example...
Regards,
Pavan -
Can anyone give me the OSS link?
can anyone give me the OSS link? I just can't keep up with SAP and amazed at how fast they update the look of service market...
Help please.
ThanksFor Accessing Notes directly you can go to
http://service.sap.com/notes
Thanks,
Raja -
Can somebody give some real time questions for alv report
hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva -
Can anyone give me the DLT tape drive compatibilty list?
Dear All,
I am starting to make some DVD-9 project with DPS4. But I have to purchase a DLT drive. I have no idea which one to buy and I cannot find any information from the site. Please can anyone give me advice. Thanks in advance.
Mac G5 Mac OS X (10.3.9)Basically all DLt drives are made by Quantum and then rebadged by other manufacturers. The ones to look for are 4000, 7000 and 8000. If you can go for a 7000 or 8000 as i think these wrtite tapes faster and if your replicators accept them use DLT IV tapes as they write faster as well. The drives come up on ebay quite regularly and bargains can be had. I have bought six different drives over the years (some as back-ups just in case) and have never paid more than £100 for them (in the UK)
Don't forget you will also need a SCSI card for your Mac (Atto appear to be the only game in town anymore for Mac G5s) and SCSI leads and maybe an active terminator for the DLT Drive
Hope this helps
Steve -
I want to move my iPhoto from my internal hard drive to an external hard drive to free up space. Can it be moved entirely and function the same as before with all features and the software itself on the hard drive? Also, can anyone give step by step instructions on how to do this? I'm having a difficult time figuring this out on my own by trying to search through Apple support.
Oops...
Here you go...
iPhoto: How to move the Library to an EHD
Make sure that the EXT Drive is formatted as Mac OS Extended (journaled).
That's what iPhoto Likes...
Maybe you are looking for
-
I want to download the latest versio of Firefox for MAC OS 10.4
I (Apple store) have just installed version 10.4.11 on my MAC OS X. I want to upgrade Firefox browser from version to 2.0 to the highest available for my version of MAC. Note: It is an E-MAC Please advise in simple step by step instructions. Thank yo
-
Convert Scribble fill to line..???
Hey there!! Does anyone know how to convert the scribble fill (effect>stylize>scribble) to a line so that way I could change the brush of the fill-- not the outline Thanx x
-
Dear Gurus, This is Keerthi and am working for utility client in the UK. We are designing and developing SAP ISU as their business application. They have a requirement of developing business process flows (step by step procedure flow chart) for var
-
Aperture Library accessed once a second, non-stop?
Sat down to my iMac this morning and, within seconds of waking up, I noticed that the hard drive was being accessed once a second, non-stop. After 5-10 minutes, it started getting annoying, so I did some digging in Terminal. It appears a java process
-
Final cut pro 7 goes blue screen
Please help help, I'm still using final cut pro 7, last week while I was working on a project the screen turned blue w/white lines, ever since I could not use FCP 7 anymore.. I updated the OS, I even formatted the internal HD, but no success, please