Can anyone help me, my mac book pro wont stop loading on the password screen. ive tried everything but nothings working! need help ASAP
need help with MAC Book Pro! stuck on loading the password screen!
Do you mean after you log in, it just gets stuck?
Do the #6 Step here to reset your User Permisisions and see if that works.
Step by Step to fix your Mac
Similar Messages
-
i am using mac book pro and I cannot see the video of my chatmate using skype or fb.please help
Is your version of Skype known to work with your operating system version?
-
I can't turn on my Mac Book Pro. If I press the power button will beep 3 times (won't turn on) stop and beep 3 times again. What can I do?
Three beeps at startup almost always indicate bad RAM. You probably need to get your RAM replaced. Bring it in to Apple for a definitive diagnosis if you are unable to run the Apple HardwareTest
Using Apple Hardware Test - Support - Apple -
My ipod says theres headphones in but there isnt ive tried everything but nothing works help!!!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up. Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicated as "n/a" (so, unknown OS, etc). Error code 1604 came up so I downloaded iTunes on the Mac Book and it is currently showing version 10. But now when I try to restore the iPod, error code 1611 comes up and the troubleshooting doesn't tell me what else to try. The USB connector that came with the iPod was also never used before - brand new also from the box so that should be fine. I also tried a different USB port on the Mac Book. Any ideas?
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
My Mac Book pro randomly stops loading webpages even though it is connected to wifi
so i just got a mac book pro 13 " on saturday, and everything seems to be working fine. but every once in a while the internet will just stop loading and nothing will work even the app store. My laptop still says that its connected to the wifi though. the only thing that will help is if i restart the mac. can somone please help me?
Have you seen this thread?
mavericks wifi: Apple Support Communities -
I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was taking too long and my itouch turned off. now, i can't turn it on.went online and tried everything from the troubleshooting assistant but nothing works. HELP PLEASE!
Have yu tried everthing here:
iOS: Not responding or does not turn on
Next see if placing the iPod in DFU mode will allow iTunes to see the iPod so you can restore the iPod.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, make an appointment a the Genius Bar of an Apple stroe. -
Please I need Help
When I try to donwload something , it says: "apple id desactivated" and there's nothing I cant do and nobody knows how to help me. I would thank any help!!Perhaps this will help:
http://support.apple.com/kb/TS2446
Regards. -
How can i connect my 2008 mac book pro to a tv?
how can i connect my 2008 mac book pro to a tv?
The Mini-DVI to DVI adapter is designed for the iMac (Intel Core Duo), MacBook, and 12-inch PowerBook G4 — allowing you to connect to an external DVI monitor. It can also be used in combination with the Apple DVI to ADC adapter to support older Apple flat panel Studio or Cinema Displays.
-
Each time I open FCPX my mac book pro freeze and I get a blue screen and my mac book is completely frozen...
Have you removed those plugins ? They could be in your Movie folder or Library - application support - FCP- plugins - effects
-
Is there a version of Logic Pro X that can be installed on a Mac Book Pro with OS X Version 10.7.5 ?
No.. Logic Pro X requires 10.8.4 or later....
To Purchase and install Mountain Lion these days.. you must buy a download content code from Apple directly... It is no longer available directly via the Mac App Store as an item you can select and buy...
If you are in the US then this link will help you...
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion -
I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
I am looking for 500 to 700GB SSD.
ThanksUpgrading your MacBook Pro with a Solid State Drive...
...call back with any questions.
Clinton -
Can't open any apps on my mac book pro that i downloaded from the cloud
can't open any apps in i-tunes on my mac book pro that i downloaded from the cloud
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hi, can we use 15 inch mac book pro dvd to macbook pro13
hi, can we use 15 inch mac book pro dvd to macbook pro13
No. Your 15" MBP OS installer disk is machine specific.
-
Have issues printing and scanning from my Mac Book Pro on a Epson Stylus TX110 printer/scanner. This printer used to work fine on my old windows based laptop. However. When tried to install the software from the original disk, on my new mac, got an error message that could not recognized the application (My guess is that software was old.)
Went to EPSON support website, located the drivers for my printer, TX110_scan_3730 GM2.dmg and TX110_115_653APS_C2_GM.dmg
Downloaded them and ran the script and went through the whole process of installing, it said it finished installing both applications, but I can-t find the printing applications or run the scanner...
Desperate... need to scan and print!You ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below. If you use any iWork applications, you may need to delete them and redownload them from the App Store.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.
Maybe you are looking for
-
Iphone with ios6 as a remote for apple tv - song sometimes skips
I use iphone with ios6 as a remote for apple tv but sometimes a song skips while playing. What can I do to stop this? Very annoying as I'd like to use it for a party. Thx
-
Exchange Server 2013 does not deliver mail as they arive.
I need Help and guidance on this problem. I have installed Exchange server 2013 with SP1 on Server 2012. Install Went perfect no error. It on a server with 2 TB storage. 16G memory. Exchange 2013 is the only application running on the box. DNS servic
-
Hello, I was trying to use the File_open_dialogue in the CL_GUI_FRONTEND_SERVICES and used the parameters as follows: CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG EXPORTING WINDOW_TITLE = 'Select Files' DEFAULT
-
Looking for a cli audio visualizer from moc or alsa output.
i'm looking for a simple cli-based audio visualiser that takes output from alsa or moc. it should be light on resources (projectm looks silly and dated), even a graphic equaliser using terminal colours would do fine.
-
Adding Custom Link in Masthead
Hi, How can we add a custom link in the Masthead iview in CE7.1 Thanks & Regards, Sudhir