Can anyone help me restore my phone without loosing messages and photos, ive updated to IOS6 through wifi only and have been told it had to have a computer conected to it and now it says no sim
Does anyone know how to reset a iphone without looosing messages and photos
A reset does not affect any data on the device.
A restore does affect data on the device.
What are you actually trying to do?
Similar Messages
-
We updated to 10.5.6 and now when we click on the mail icon the browser comes to the top but no mail screen appears can anyone help???
ThanksBe clearer and accurate what OS you are referring to.
-
I tried to not restore it but the phone wouldn't even turn off so thought I had no choice : ( XX
Hi Peter, Outcome is I look like a real big idiot!!!! When my husband got home I was in the process of writing down all the details to inform apple of the dodgy o2 store, only for him to inform me that he never got it unlocked at the o2 store because they couldn't do it the same day and as I have zero patience he took it a few doors down to a phone shop that advertised unlocking of phones! So now holding my head in shame I have to appologise to o2 and to everyone for wasting their time! Sorry! I assumed that when he gave me the phone and I asked that it was fully unlocked (as we had read up on the jailbreak and red something?) and he said yes! that the o2 store had done it, but he had asked the shop that unlocked it if it would be fully unlocked and took their word for it! so my phone has been hacked and I will now be (with my tail between my legs, so to speak) taking it to the o2 store for help : ( Hope someone else will read this and learn for my (well my husbands) lesson and go through the correct channels, Thanks again to yourself and KiltedTim and Sorry! XX
-
Hello my iphone was buy in Apple store as neverlocked i was using for one year but yesterday i was restoring my iphone and now it says ``INVALID SIM CARD CAREER`` please help
Hi there DJCanndy,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
-Griff W. -
i went to update my iphone and now it says no sim grrrr and keeps telling me to connect to itunes which says no sim
Your iPhone is in recovery mode. Do the following to get it out of recovery mode.
Plug your iPhone into your computer with iTunes open make sure iTunes recognizes the iPhone in recovery mode.
Hold down the power button and the home button to do a hard reset and shut it off
Keep your finger on the Home button ONLY and unplug the iPhone from the cable
Release the Home button and allow the iPhone to power back on which may take a few minutes
The iPhone will return to its prior format
Hope that helps! -
Hi there. Can anyone help with restoring my Mac to it's origin white, it has got very grubby. Thanking you.
From here:
http://forums.macrumors.com/archive/index.php/t-863188.html
"You can use the Magic Eraser to clean the white plastic."
"thanks for the Magic Eraser tip, I willtry that..so far I've been using disinfectant wipes, which work pretty well, too because of the alcohol in them" -
I have don't have service on my iPhone 5c but I accidental locked my sim and now I says "locked sim" how do I unlock the sim
iOS: Understanding the SIM PIN
-
The cellular data services have disappeared from my settings. Can anyone help me restore it please?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad
Hey salosawaya,
If you have never synced your device with iTunes and you forgot your passcode, you'll follow these directions:
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
via: iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Welcome to Apple Support Communities!
Regards,
Delgadoh -
touch screen on my iphone 4 is frozen and unresponsive can anyone help me. i`ve tried turning it off and on but no change at all
Basics from the manual are restart, reset, restore.
Try all of these.
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
Can anyone help me find a song I heard over and over in St. Lucia in April, 2007? It was a reggae or soca song that was played regularly in the resort we stayed at and all over the island where we visited.
SeanD - message sent - any chance of a follow up
Getting Worse
. Best Effort Test: -provides background information.
Download Speed
13083 Kbps
0 Kbps
24198 Kbps
Max Achievable Speed
> Download speedachieved during the test was - 13083 Kbps
For your connection, the acceptable range of speedsis 12000-24198 Kbps .
Additional Information:
IP Profile for your line is -24198 Kbps
2. Upstream Test: -provides background information.
Upload Speed
1607 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 1607 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 2000 Kbps
We were unable to identify any performance problem with your service at this time. -
Can Anyone help with syncing my contacts are getting duplicated and there is a file from my computer and they are not the same it is driving me carazy can anyone help?
Are you in DSL? Do you know if your modem is bridged?
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06 -
Can an Apple store restore my iPod without loosing data?
Can an Apple store restore my iPod without loosing data?
The only way to unlock it is to follow the steps in http://support.apple.com/kb/HT1212 or one of the similar knowledge base articles, which includes restoring the device. If you have a current backup you can do that and remove the passcode.
-
Went to update the ipod touch and it wiped out everything , Itunes keeps trying to restore it but fails everytime giving me an error that it cannot see my ipod yet it sees it and tries to restore it everytime i connect the ipod to the pc , the help file suggested i reinstall the latest version of I tunes so i did i tried using different ports on 2 computers and also bought a new connection cable but still won't restore can anyone help?
Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Hi, can anyone help with this one. I recently upgraded my computer and downloaded itunes again. Now when I plug in my iphone my daughters account comes up instead of mine???
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
Maybe you are looking for
-
Update process does not work on Tabular Form
Hello, I have 2 tabular forms on one page, which are using manual update processes. First form is created using wizard, and therefore works perfectly. The update process is as follows: DECLARE lc_string VARCHAR2(4000); BEGIN FOR i IN 1..APEX_APPL
-
About 95% of the time, whenever I boot/reboot, the date and time doesn't show up in the menu bar. When I then open the Date & Time prefs pane, I find that the "Show date and time in menu bar" box is unchecked, even though I had previously checked it.
-
Why you receive a notification and you get the banner across the top is there a way you can swipe or something to get it to go away?
-
User Authentication Logical Model DB2
Hi Im attaching a logical model. Experts please take a look an guide for changes or to include more details. This is basically a user authentication logical model ERD Eagerly awaiting your reply. I am unable to attach a file if i can share the file i
-
Hi I had a form with many form fileds and now we are adding one input text field that should be numeric with 5 digits long and i need to validate this input for numeric and 5 digits long(if the user enters anything in this field or its ok with empty