Can anyone help me sort out the audio on my k8n neo2

Audio has never been one of my strong points so im stuck trying to get the onboard sound on my k8n neo2 board to work properly. The case i have has front connections for  headphones and another for microphone. Ive managed to get the front headphone jack to work i havnt got a mic so i cant try that. I have tried connecting my stereo speakers (part of my monitor) to the line out at rear (green jack plug) , i notice in the msi sound manager they refer to this connector as front speaker out. I had no sound at all until i came across aforesaid msi sound manager, the only way i can get sound is by going into this manager and selecting "speaker configuration" and either selecting 8 or 6 channel which i havnt got but at least i can hear a cd when its playing. The problem with this is that when i boot into windows there is no sound played. I have noticed in the mobo manual page E-2-20 under msi reminds you.. If you dont want to connect to the front audio header (JAUD1), pins 5&6, 9&10 have to be jumpered in order to have signal output directed to rear audio audio ports. Otherwise the line-out connector on back panel will not function. Wonder if this has something to do with it. I encclose an image showing the relevant mobo page with connection instructions and the wiring of front panel jacks from my case instructions.
 on the JAUD1 pins 6 and 10 audio signal returns for right and left channel  but my case wiring only had a single return in the form of the shield braid so i split it in two and connected to pins 6&10 to see if this would cure the no sound problem, it didnt. Just hoping the image is big enough for people to read. Hope someone can help with this.

Well lets see if I can help.
Connect like this:
Red---->Aud_fpout_L
Jump with Red---->Aud_ret_L
White---->Aud_fpout_R
Jump with white---->Aud_ret_R
I think is... Spiral---->Aud_gnd this you have to share with the mic that is also Spiral
As for the mic .... MIC power---->Aud_mic_bias
MIC-IN---->AUD_mic
And I think that's it....
Be well....

Similar Messages

  • Hi sap gurus can anyone help to sort out problem on credit memo

    hi sapgurus
    my scenerio is like this
    1) some people are creating the credit memo for the invoice which has been cancelled. my question is that if u cancel a invoice sap will allow u to create the credit memo?
    2)second quesstion is that how can i restrict some one from creating the credit memo for the invoice which has been cancelled? if i how to do it?
    thanks in advance
    sam sd

    Hi
    Not displaying the subitems in the invoice can be controlled in the program which is linked to your output type. If you inform your reqmts to the ABAPer, he should be able to code accordingly.
    For demand planning, you may either have to use Sales Operations Planning or Transfer of Reqmts in SD. You can talk to somebody who knows either of these good and they can help you. Alternatively, you can post this specific question in PP also. May be you will get immediate answer for this.
    Pls reward if this is helpful to you

  • I've tried to register as a homeschooling family with iTunes U. (The registration options weren't geared to allow me to say as much.) My application was denied. Can anyone help me sort this out?

    I've tried to register as a homeschooling family with iTunes U. (The registration options weren't geared to allow me to say as much.) My application was denied. Can anyone help me sort this out?

    Private courses support up to 50 students, so you shouldn't have to register your family.
    Have you contacted Apple support?
    http://www.apple.com/support/itunes-u/public-site-manager/contact.html

  • Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Please repost on the CS6 part of the Audition Forums.

  • I made a website, but have now deleted it in order to take it down. However, after deleting it, the website is still online? Can anyone help me figure out how to remove the site completely?

    I made a website, but have now deleted it in order to take it down. However, after deleting it, the website is still online? Can anyone help me figure out how to remove the site completely?
    The site is joehewett.uk and I am worried that now I do not have the files of the website I cannot remove it?
    James.

    Did you delete the files from your Remote server?
    Deleting the local site folder or the site definition in DW will have no effect on your remote site.
    When I go to your URL, I see the index.html page with 16 code errors and this background image:
    http://joehewett.uk/Untitled-1.jpg
    So the site is still online until you delete those files from your server.
    Nancy O.

  • I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    Hi , a similar thing happened to me with another piece of software .. it was then that I realized I have two accounts .. I have no recollection of setting up two but it seems I did somewhere along the line.. I have jimkells and the second is [email protected] .. so when I logged in as the other acc there it was and I was able to update .. could it be FCPX was bought on another user account ??
    Jim

  • When i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

    when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

    Ok, it's just a glitch that it's not auto-rebooting from the disk.
    Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
    Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
    Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way.

  • Can anyone help me figure out how to sync my ipod with my purchased music?  I have used several computer and at one point synced my ipod with a computer that only had about half of my music.  My other computers are no longer working.  Not sure how to get

    Can anyone help me figure out how to sync my ipod with my purchased music?  I have used several computer and at one point synced my ipod with a computer that only had about half of my music.  My other computers are no longer working.  Not sure how to get my purchased music back onto my ipod?

    Hi kimcinma!
    Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
    Sandygirl

  • Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

    Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

    I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago.  I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?

  • I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Can anyone help me find out if its a hardware problem???

    I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Its a 1year old phone n the version is 4.3.2(8H7). Also the volume sign does not go off from the screen. Can anyone help me find out if its a hardware problem???

    Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
    This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
    You can always contact Apple and setup service through Express Lane.

  • Can anyone help me figure out how to copy .jpg (pictures) from my PC to my IPAD2?

    Can anyone help me figure out how to copy .jpg (pictures) from my PC to my IPAD2? 

    Create a folder on you PC and copy the pictures you want on the iPad into that folder. Then start iTunes and plug in your iPad. In the column on the left (about half way down) click on the name of your iPad.   Then click on the photos tab near the top and to the right of the screen.  Check the box that says Sync photos and then select the folder you put your pictures in from the drop down menu on the screen. Then click Apply down at the bottom right hand side of the screen. Hope that helps!

  • I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?

    I don't understand why a person who has been with a company for 6 years cant get a simple upgrade can anyone help figure that out?

    Are you trying to get an upgrade before you're actually eligible? If that is the case, it doesn't matter if you've been a customer for 6 years or 6 days...if you're not eligible then you're not eligible. Some of your possible options are to pay full retail, do an early edge up (if you are eligible for that option), or buying a phone from some other source to use.
    If your situation is something different then it might help to share that. The options may still be the same but it helps to know what exactly the issue is.

  • Can anyone help to straighten out my technet account?

    Can anyone help to straighten out my technet account?
    I had a technet account as 'markfilipak'. The other day I logged in and tried to "Ask a question". As soon as I clicked "Ask a question", technet demanded that I create a profile. Hmmm ...I thought I already had one. Ah, well, I gave
    my "Display Name" as 'markfilipak', but technet said it was already in use. (Of course it was in use... by me!). So just to get around that, for "Display Name" I entered 'markfilipak-'.
    Now I have no history, zero credits, and it appears I just joined.
    Can anyone there help to get this fixed?
    Thank You.

    I did search and came up with nothing. I'd still send an email to fissues [at] microsoft [dot] com
    On the email notice; that wouldn't happen unless you setup an alert email address on your new profile.
    Quick Access|My Settings|Configure Alerts
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Can anyone help me with getting the best setting for me system

    can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help  

    my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
    i wouldnt be too concerned...those temps are pretty low to begin with.

  • Help me sort out the problems with Java 2 SDK SE

    I install Java SDK 2 standard Eddition version 1.4 in my computer (Window NT4). When I test the installation by typing in "java -version", it displays the following message.
    C:\JavaPractice>java -version
    java version "1.4.0"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0-b92)
    Java HotSpot(TM) Client VM (build 1.4.0-b92, mixed mode)
    But, When I compile a simple programme, it doesn't work and displays the following message.
    C:\JavaPractice>javac HelloDan.java
    The name specified is not recognized as an
    internal or external command, operable program or batch file.
    Could anybody help me sort out the problem, Please?

    i might guess that you have j2sdk1.4.0\jre\bin on your PATH, but not j2sdk1.4.0\bin ...
    Larry

Maybe you are looking for

  • I have an issue with the address browser in mail in Yosemite

    I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail. Previously in my pending to send email toolbar there was a contacts icon which I clicked  on to display my contacts list. I could hold down the Comma

  • How to change the images dynamically in a table.

    Hai,                  How to change the images dynamically in a table based on the condition in webdynpro abap. Edited by: Ravi.Seela on Oct 13, 2011 2:17 PM

  • Simple question... or so I thought

    Hi everyone, I think I've just wasted 2 hours of my life trying to find this answer. Don't know why no one else has encountered this but anyway... How do I choose a specific location for my XCode projects? When I go to create a project I select my pr

  • Dynamic tooltips on alv column

    I am displaying one alv column as the traffic lights icon. Depending on whether it is red, yellow or green, i want to have a different tooltip for this column. is this possible? if yes then can someone please tell me how to do it? regards, Priyank

  • "unsupported construct or internal error"

    I'm trying to call a procedure (via a concurrent request) using the FND_REQUEST.SUBMIT_REQUEST procedure in a WHEN-BUTTON-PRESSED trigger in my form and I keep getting an error when I try to compile the trigger code: Error 707 at line 1, column 1 uns