Can anyone help me troubleshoot duplex printing issue to Xerox 8560?

Can anyone help me troubleshoot duplex printing issue to Xerox 8560 phaser?

Solution may be found if you search in the "More Like This" section over in the right column and by contacting Xerox tech support. 

Similar Messages

  • While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

    While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
    Can anyone help me to resolve this issue.

    Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
    First did a full back up of  iphone using iTunes
    Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
    Disconnected USB cable from iphone
    Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
    Pressed and kept holding Home button while plugging cable back into phone
    I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
    Recovery Mode alert came up in iTunes.
    Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
    iphone did not appear in iTunes due to missing pairing file (that made me nervous)
    iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
    Eventually the iphone asked if I wanted to restore from a back-up (whew!)
    A window opened in iTunes and I was able to select my previous back-up file for the restore
    A full restore from back-up then occured
    I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
    When the restore was done I had to re-enter some passwords, but everything was there
    iOS is now 5.0.1 (9A406). The whole process took about an hour.

  • Can anyone help me troubleshoot my VPN client issue, DART log attached

    Hi all
    I am having issues connecting with my anyconnect client, version 2.5 running Windows 7 64 bit
    It keeps saying repairing vpn adapter, then encountered an error, there is no AV running, and I have reinstalled it many times
    here is the log files
    Can anyone help ?
    cheers

    Hello, there won't be a specific answer because so many things can cause that error.
    You can try cleaning it...
    http://www.discountofficeitems.com/technology/computer-accessories/cleaning-main tenance/cleaner-maintenance/fellowes-lens-cleaner/p28997.html
    Occasionally a PRAM reset, CMD+Option+p+r will cure it...
    http://docs.info.apple.com/article.html?artnum=2238
    Media is likely the biggest cause, might try burning at a slower speed.
    http://burn-osx.sourceforge.net/Pages/English/home.html

  • Can anyone help me with sufficient privileges issue

    Can anyone help me with sufficient privileges issue

    Helping with permissions often requires we know the specific error you find: what program, for example, and what you were doing when told you didn't have privileges.
    If you are running a standard account, you have to get back to the admin acct to make changes. If you are not eh administrator for that computer, find out who is.
    If you are in an admin account, trying a "Repair Permissions" can sometime resolve the issues. Find Disk Utility in Applications > Utilities. Select the indented name of your hard drive, then click the "Repair Permissions" button:
    In OS10.4 this usually under a 2-minute operation. You will probably see a lot of entries in the Reulsts pane but you can ignore those.

  • Can anyone help me with a passcode issue on my iphone4?

    I have an old ipone 4 that i forgot the passcode for.  I actually want to clear it out and give it to my son to use as an ipod.  I kept trying to enter remember and now it is telling me to try again in 60 minutes.  When I try to hook the phone up to my computer/ itunes it is telling me i need to unlock the phone.. can anyone help?

    Unless you can remember your passcode, there is no other way to get into the device. Your only other option will be to restore you iPod.

  • Can Anyone Help? Upgrade with Windows Issue

    I bought my daughter a Ipod nano for Christmas this past year (2005). Everything worked great until the new 6.0 upgrade. We downloaded the upgrade last week and it was completed successfully. Yet when I go to my desktop and try to go to the site I get nothing at all. I can't even access the itunes site. Can't even access it through apple.com. I get the download message. I spent hours on the phone with apple trying to figure out the problem. Uninstalled and reinstalled the whole thing several times. Even went back to my original CD that came with the ipod and still get message that I need to upgrade. I was told
    ( by an apple rep) I have to do a msconfig start up on my computer for the upgrade to work on Windows. Upon doing that I can access my library but access to store is denied. I called apple again and was told they have no idea what is going on but it has to do with the upgrade and windows. I was basically told I may want to consider selling my Ipod, by a apple tech. Is anyone else having this problem. I just want to know how to get the upgrade using windows xp and be able to use it without having to msconfig start and then still not be able to access anything.
    I have tried everything, from shutting down my firewall, anitvirus to rebooting my computer back to before I ever put Itunes in it since I was unable to un-install it with the add/remove on my computer.
    Can anyone give me some advice on how to get this to work with windows? It would be greatly appreciated since I have a few friends also having the same issues. Thanks

    Don't give up yet. At this point I would suggest cleaning your system with ipod and itunes software and reinstall. I know you tried this before but I'm going to give you more detailed instructions. Please read them carefully first before doing them and ask questions if you don't understand them. Also don't skip anything and be careful to not skip part of a step.
    1. Uninstall itunes and ipod software
    2. Reboot your PC
    3. Re-download the itunes installer and QT and save this installer to your desktop
    4. Go to C:\WINDOWS\Downloaded Installations. You should see folders like {06EB3288-C5F4-4C73-8EEE-AC798668FF66}
    5. Look in each of these folders for itunes.msi and delete the folder. Be careful to only delete the folders containing itunes.msi
    6. Clean out your the following folders, Delete as much as you can in these folders except for the folders Cookies, History, Temporary Internet Files.
    a. C:\windows\temp (if one exists)
    b. C:\Documents and Settings\{username}\Local Settings\Temp
    Sometimes installers will pick up old files or won’t delete their temporary files.
    Also delete c:\program files\itunes & c:\program files\ipod
    7. Go to http://www.download.com/3000-2094-881470.html and download the regcleaner. Unpack it and run it. This is a nice utility that will delete broken registry entries and create a file with them. This way if it deletes anything needed you can add it back. Note I never had to do this with using it for many years. Also it doesn't list XP but you'll be fine. I run XP on both.
    8. Reboot your PC.
    9. It wouldn't hurt to scan your PC for viruses at this point.
    10. Now try to go and install everything again. I'd do QT first then follow with itunes. Remember to disable virus/firewall/privacy/web accelerators before launching the install.
    You don't have to try the QT if you don't want to but if you do make sure you do it first before itunes and ipod software.
    I hope this helps! Let me know what happens.

  • Can anyone help out with an ongoing issue?

    I have been informed by Apple that my ISP is allowing my computer to be accessed remotely via some type of bridge support or ad hoc network! I have tried to remain proactive w/ addressing this issue but things have been frustratingly tumultuous within my county for some time now. It seems as if a business is assumig co ownership of my MacBook, That being said I know all stems from my ISP and their ability to manipulate my network! Can anyone offer any suggestions? I have been informed my best route is to sell my devices and leave this small minded county in my rear view, That's my plan moving forward but I don't want my computer os phone to be compromised repeatedly!

    Tony_CEE wrote:
    I have been informed by Apple that my ISP is allowing my computer to be accessed remotely via some type of bridge support or ad hoc network!
    How did Apple inform you of this, it s a most unusual move on their part (in fact it is the first time I have ever heard it)
    Unless you have sharing enabled and sharing services turned on this is highly unlikely (if another person has physical access to your Mac not so unlikely)
    What makes you think that some other person has control of yor Mac?

  • Can anyone help out with an I issue that is showing on my iPhone?

    Recently I discovered I was running version6.13 (10B329)
    Can anyone explain what this is and how it ended up on my iPhone?

    That simply indicates the build number (sub-version, sort of) of the software, and takes into account beta and test builds. From a user standpoint, it doesn't mean a great deal. There would have been only one "build" available for your device.

  • Can anyone help with my broad band issue please?

    Hi all, I'm leaving this message here in desperation as I really don't know what else to do apart from cancel my contract with BT.
    I had broadband and a phone line installed on the 26th of May and though the phone line went live straight away, the broadband has not worked. An engineer visited, advised the issue was at the echange and late called my partner to see if the blue light on the hub had come on. She confirmed it had and the engineer than closed the call.
    I arrived home that evening to try and use the broadband and connected but the speed was abysmal.
    I then ran a speed test which informed me my download speed was 0.38mbps. Obviously this speed is not worth paying for.
    I called again to report the poor speed and was told an engineer would visit this morning between 8 and 1. My partner booked this time off from work but the engineer did not turn up. I spoke to the online service to report this and they said they could not see an appointment had been booked. I remembered to print off my previous online conversation with them and even quoted the reference number for the booking. They then said there was a technical issue at their end.
    They have rebooked for next Monday and unless they resolve it there and then I can't see any other option but to cancel the whole thing.
    I am so frustrated at the last of customer service and the fact I have to talk online to someone who is very apologetic but not able to help. I can't believe I can have a service installed on the 26th of last month and it still is not working!
    And the fact that my partner has twice booked half days for the engineer appointments is just bad luck?
    If anyone has any help or knows anyway to expedite the issue or speak to anyone with enough authority to log a complaint I'd be most grateful. Thank you

    from the speed can I assume that it was adsl (copper) and not fibre connection?
    which hub do you have?
    can you enter your phone number and post results remember to delete number  https://www.btwholesale.com/includes/adsl/main.html
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • TS1474 can anyone help me in resolving my issue please?

    whenever i connect my iphone 4s running ios7.0.2 to my laptop window 7 running latest version of itunes, it displays a message "an iphone has been detected but could not be recognised.disconnect it than reconnect it later" why is it so? my iphone is not being connected to itunes? previously it was connecting properly. this issue started even before updating my iphone to ios7.how it can be fixed now?? any suggestions please!

    If you have access to a different USB cable, that would be well worth a try.  Otherwise, you could Reset the iPhone and see if that helps.  Hold down the Sleep button and the Home button at the same time until the Apple logo appears then wait for the Reset, returning your iPhone to the lock-screen.  Now try rebooting your laptop and then connecting the iphone to the USB cable, then the cable to the best USB port available.  If you have two or more USB ports on your computer use a different one than you have been using. 

  • Can anyone help me? Flash player issues

    For about 3 months now i have had some flash issues which i believe i have tried everything i can possibly think of. I am using 11.2.205.235 currently up to date and my main browser is firefox, however this issue happens on all browsers.
    I, whenever a new update, do a clean install as per your site instructions. However the last 2 updates it seems that it installs fine, works fine and then once i have restarted my laptop stops working within a browser and has to be reinstalled. The files are still there, it doesnt tell me to reinstall, but it doesnt work, nothing works, so i reinstall and it starts working again.
    I have made a new admin acct on my laptop, no joy. I have done at least 100 clean installs, no joy. I have tried many browsers, no joy. I have tried the windows fix for allowing flash you describe, no joy.
    I am out of ideas, i continue to reinstall everyday for it to work and its very annoying, please someone help.
    Windows vista 32bit
    firefox 12
    Andrew Manning
    thank you

    I have seen this symptom dozens of times here at the forum, and normally a clean install fixed the problem permanently.  I don't know why it does not for you.
    Things to try:
    see if a driver update improves the situation (black instead of video may be fixed with a driver update): http://forums.adobe.com/thread/945765
    see if there is a permission problem somewhere: http://forums.adobe.com/thread/987370
    If that still does not fix it, hopefully someone from the Flash Player team can step in (after the weekend is over in the US).

  • Can anyone help w/Apple ID/email issue

    Oh man, I hope someone can answer this for me. It's driving me NUTS!!!
    I have an Iphone 4, I installed the update a few days ago and everything seemed fine. Until I went to install a new app and "the phone asked me to" enter my password for my Apple ID. I did but it kept telling me "incorrect, retry"
    Then, I realized the problem, I WAS entering the right password, but my email adress on the account isn't mine. It's someone else's and I can't find how to change it to mine on the phone.
    I love you forever to whoever can help me LOL
    Jen

    What IOS version?
    IOS 5: Settings > Store > Apple ID > sign out and sign in with the correct Apple ID.
    IOS 6: Settngs > iTunes & App Store > Apple ID> same as above.

  • Can Anyone help with an Illustrator transparency issue?

    I created a logo in Illustrator which includes an imported Photoshop psd file with a transparent background. The transparency behaves properly in Illustrator, but as soon as I place it in In Design or open it in photoshop the graphic shows up on a white box/background (the rest of the elements in the logo remain transparent, as they should be). And btw-the greyscale version of this same logo has no transparency issues.

    function(){return A.apply(null,[this].concat($A(arguments)))}
    it is part of an entire suite of logos that are all vector based Illustrator files
    No, it is not. It contains a raster image, so it is not "all vector" regardless of its being assembled in Illustrator.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    The EPS file will not handle transparency.
    EPS supports "transparency" in 1-bit raster objects. It also supports clipping paths, which is how this particular logo would have been handled in earlier times (assuming one insists on the simple grads being raster).
    function(){return A.apply(null,[this].concat($A(arguments)))}
    What kind of file do you save and place in ID - should be an AI - is it?
    InD doesn't really import AI content. It only imports PDF content of an .ai file (if any).
    function(){return A.apply(null,[this].concat($A(arguments)))}
    I'm on a time crunch
    Take Scott's earlier advice. Especially given that you are compiling a collection of (presumably) reuseable logo files, this should be re-created as entirely vector content. That mark should take no more than a few minutes to redraw. Simply by including the raster element (which is primary element, by the way), you are obviating the core advantage of vector artwork (resolution independence) to begin with. So if you insist on that element being raster, then the whole thing might as well be, and your workflow is needlessly convoluted.
    JET

  • Can anyone help with the java applet issue

    Hello everyone,
    This is my first thread in this forum,
    I need a little help with the form developer...
    I have oracle 9i db , 9i form developer
    I don't want to run the form i created as a java applet
    HOW IS THAT DONE i.e NOT IN THE INTERNET EXPLORER?????????
    ***IF ITS POSSIBLE

    Hello,
    I don't want to run the form i created as a java applet
    No chance, because the Web Forms client is an applet and cannot be anything else.
    Francois

  • Can anyone help with a WRT54G connection issue - it just stopped working

    I have a Dell running Windows XP.  I have a DSL connection with a Westell 6100 modem connected to a Linksys WRT54G router connected to my main computer.  I use the router for a wireless connection to my laptop.  This setup worked fine for years - until a few days ago.  I no longer have internet access on my laptop and main computer.
    If I connect from the modem directly to the main computer, I have internet access.  But as soon as I put the router back in - I have no access.
    All the appropriate lights on the modem and router are lit.  When I do try to access the internet I get the dreaded PAGE CANNOT BE DISPLAYED.  When I run the diagnostic, the error log shows: "Not all base service provider entries could be found in the winsock catalog. A reset is needed".  I don’t know if this is a standard catch-all error or not?
    Everything was fine until a few days ago when I just lost access.  Do I need a new router?  I hate to buy one and then find out something was corrupted on my computer instead. :-(
    Thanks!

    When connected from modem to PC directly (no router) and I type in ip[config /all (don't know if this is what i should do) -- I get:
    IP Address 192.168.1.100
    Subnet Mask 255.255.255.0
    Default Gateway 192.168.1.1
    DHCP Server 192.168.1.1
    DNS Servers 192.168.1.1
    Does this mean I should try to change the LinkSys Router?
    I will go look there next.

Maybe you are looking for