Can anyone help me with reset sync history problem in iTunes?

I'm trying to reset my iTune sync history.  I used to be able to do it isn iTunes Preferances, but that is no longer an option.  I understand that you have to go to Terminal now and type in the following:
/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
I tried that, but I got an response stating that there is no such folder.  What do I do now? 
How do I reset my sync history?
I'm using a MacBook Pro with Mavericks as the operating system. 
Many thanks

Hi Cristian, thanks for responding so speedily!
On the homepage, click on the 'diagrammatic' thumbnail for example, then click on the 'volcano' thumbnail, when the volcano page appears, you should see the little magnifying glass plus rollover image under the main image to the right.   As I said, on these specific pages, in IE 7 the symbol jumps to the top left of the main image.
For your info, I have seen this problem on my older XP pc, which runs IE 7.  All is fine on my newer Vista pc, which is using IE8 & Firefox.
Maj

Similar Messages

  • Can anyone help me with flash player download problems?

    Can anyone help me, I am having issues downloading the new version of Flash Player, v 11.9.900.170.  I keep getting a window saying Action List not found.  I have the older version on my Windows 7 Home Preium pc, and need the update.  I keep trying but it wont download.  Please can anyone help me, am desperate.

    Bypass the downloader/installer.
    Download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Save the file(s).
    Close your browser (http://forums.adobe.com/message/5266110)
    THEN run the installer.

  • Can anyone help me with a little display problem in IE7 please?....

    I have just uploaded a new site which has been created using Dreamweaver CS4 for Windows.  There is no problem viewing the site in IE 8, or in Firefox.
    The site is basically a gallery of images.  For some of the main images I've used little magnifying glass 'plus' symbols, which are simply linked rollover png images that take you to a larger version of the image.  In IE7 (and I presume in older versions too) these little symbols aren't displaying in the correct position on each of these pages, they've jumped and are incorrectly displaying over the top, left corner of the main image.
    Here's the link:
    www.sjcillustration.com
    Firstly, why is this happening in IE7 and yet all's fine in IE8 or in Firefox, and secondly, can anyone tell me how to fix it please?
    (I was going to attach the corresponding CSS file but don't see an attach file button.......)
    Cheers!

    Hi Cristian, thanks for responding so speedily!
    On the homepage, click on the 'diagrammatic' thumbnail for example, then click on the 'volcano' thumbnail, when the volcano page appears, you should see the little magnifying glass plus rollover image under the main image to the right.   As I said, on these specific pages, in IE 7 the symbol jumps to the top left of the main image.
    For your info, I have seen this problem on my older XP pc, which runs IE 7.  All is fine on my newer Vista pc, which is using IE8 & Firefox.
    Maj

  • Can Anyone Help Me With My Curve 9320 problem?

    I need help with my phone, I got the Curve 9320, its registered with the wireless network, I can call and sent txt but I can't load up BBM, nor can I set my email account to the phone, which is a hotmail account which I could really use my phone being connected to, can someone suggest anything to help me get my phone fully working?

    Hello lan 
    Thanks for this information ! 
    So to resolve your issue can you try those steps ! 
    First on your Homescreen Go to Options > Device > BlackBerry ID > please check if you're already login with your BlackBerry ID .Then within that screen Press the menu key > Check for Updates ( If it prompts for update install it ) . Once it done perform a battery pull restart by removing the battery while your device is Powered On wait for a min. then re-insert it back. your device may take a long reboot.
    Then try those steps in the same sequence :
    1- Register your Handheld .
    KB00510 : How to register a BlackBerry smartphone with the wireless network
    Wait till a Registration messages comes in your message box.
    2- Resend your Service Book
    KB02830 : Send the service books for the BlackBerry Internet Service
    ( Wait till a Registration Message comes in your message box for each email that you have configured on your device )
    3-  Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back
    After perform those steps , For Email Setup   :
                         Go to Setup > Email Account > try it again , it error persists then from your BlackBerry browser browse to www.blackberry.com/integrate  and add / edit your email account .
    For BBM :
                          Open BBM and see if completes the setup Or you have to reinstall it again , but before that you have to delete any existing version of BBM from Options > Device > Application Management > locate and delete BlackBerry Messenger from that list . When its done perform another battery pull reboot 
    Finally from your BlackBerry browser browse to  www.blackberry.com/bbm and download the most recent version available for your device . Reboot your device and see if it completes the BBM setup.
    Please try those steps and let us know of your progress.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Can anyone help me with this file transfer problem?

    THE SETUP
    I have a 150 GB external HDD connected via FireWire 400. My friend has a 120 GB external HDD connected via USB 2.0. They both have external power adapters. They are both formatted in MS-DOS Fat 32 and were connected to my MacBook.
    THE PROBLEM
    I tried to transfer some video files (.AVI) from my friends HDD to my HDD. It was about 30 GB's worth of files (made up of about 150 - 200 files (each about 100 MB's - 300 MB's in size). The copy window said it should take about 30 minutes. After about 5 minutes into the transfer, my MacBook just shut off. I restarted, tried again and it shut off again after the same amount of time.
    THE QUESTION
    What is the problem?
    P.S. - If any one needs me to elaborate about anything posted above then just post what you need and I'll be glad to provide more info. (I'm very upset, tired and embarrassed. Which means that I'm not thinking straight.) ~_~
    Thank You in advance for your input and help.

    UPDATE
    Now, every time I try to watch the videos from my external HDD, my computer shuts off after about 2 minutes. I watched one whole 22 minute video while my HDD was connected via FireWire. When I tried to watch another video, my computer shutdown after 2 minutes. After several attempts to watch the video, on a whim I decided to connect my HDD via the included USB 2.0 cable. As I suspected, the entire second video played without a single problem. When I went to watch the third video, guess what, my computer shutdown again after about 2 minutes of playback.
    I was using Front Row to watch the videos. I did get the third video to play in Quick Time, but when I tried to play the fourth video (in QT) my computer shut off after about 2 minutes of playback. All of the files are .AVI video files with a resolution of about 640 X 480.

  • Can anyone help me with Labview/GPIB timing problems?

    I am trying to use a very simple VI (downloaded from the NI site) to control a Newport 1830C optical power meter.
    I have been spending most of my time trying to use the VI issue a command to read the current displayed power. When I run the VI normally, I get no response from the meter, and the VI simply terminates without any error message. (The "remote" indicator does light on the meter, though, so it seems to be receieving the command.)
    However, when I run the VI in the "highlight exectution" mode, everything seems to work just fine, and I receive a correct reading from the meter! Needles to say, this makes it really hard to debug the problem.
    My guess is that I have some kind of timing problem, and t
    he "highlight execution" feature fixes it by introducing delays. Is this correct? If so, how can I achieve the same thing by putting in delays by hand?
    thanks, Whitney White

    Whitney,
    I agree that this is very likely to be a timing issue. VIs run much slower in highlight execution mode, therefore your instrument may need more time to prepare the data you have requested. Try wiring a delay inline prior to the GPIB reads and/or writes, or try using Service Requests (SRQs) to give the instrument enough time to generate the data it needs to send back to the computer.
    Another possibility is that your instrument may not be IEEE 488 compliant. Some older instruments indicate that they are ready to receive data before they really are. Try changing the GPIB bus timing to the slowest setting (in the GPIB Configuration Utility). This only affects the time that the GPIB controller waits before valid data is on the bus and the DAV line i
    s asserted (a step in the GPIB handshaking that occurs each time a byte of information is sent to the device) so this may not be effective.
    Lastly, you may wish to try the instrument driver for your instrument. There is a contributed driver at this location: LabVIEW Traditional Instrument Driver: Newport Optical Power Meter 1830C. A 'contributed driver' means that someone outside of National Instruments wrote the driver and then submitted it for posting. This driver also contains a good example of adding a time out.
    Regards,
    Heather S.
    Applications Engineer
    National Instruments

  • HT1369 hey, when I connect either my ipod or ipad to itunes I get the promt ' i tunes was unable to load data class information from sync services. Reconnect or try again later'. Can anyone help me with syncing my devices?? Thanks in advance

    Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance

    I am having the same issue, anyone else ?

  • Can anyone help me with changing email address for resetting password notification

    Can anyone help me with changing email address for resetting password notification?

    If you know the answers to your security questions, you can change your rescue email address as shown in step 6 in this article: http://support.apple.com/kb/HT5312.
    If you don't kow the answers to your security questions or need other assistance doing this, either contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password, or contact the Apple account security team: http://support.apple.com/kb/HT5699.

  • Hi i cannot download ios 6.1.2 on iphone 5 , i tried to reset the setting and restart it but just cannot download. can anyone help me with this ?

    hi i cannot download ios 6.1.2 on iphone 5 , i tried to reset the setting and restart it but just cannot download. can anyone help me with this ?

    First, plugged into a wall power socket.
    You go to
         Settings > General > Software Update
    to update the new IOS 6.1.2

  • TS1398 The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

    The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

    greeneygreeney wrote:
    so you can't ever restore it to the factory settings? that is a big shame.
    "It will ALWAYS restore to the lates available software.
    You cannot downgrade."

  • When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

    When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

        There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
    MatthewS_VZW
    Follow us on Twitter @VZWSUPPORT

  • I'm having trouble with the volume of my i phone 4s when using headphones, the sound will only appear when the volume is at its highest, any lower and all I hear is static. Can anyone help me with this problem? Much appreciated.

    Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • I have updated my phone to iOS 8.2 and i m new to using iPhone. Whenever i am trying to open my iTunes store, its only showing me the option to open the iTunesU store. Can anyone help me with that?

    I have updated my phone to iOS 8.2 and i m new to using iPhone. Whenever i am trying to open my iTunes store, its only showing me the option to open the iTunesU store. Can anyone help me with that?

    Unfortunately Pakistan is one of those countries where media isn't available from iTunes - when that might change we won't know (we are fellow users on here) until if/when Apple announce something.
    Are there other music purchase download sites available there ? Or you can copy your CDs via your computer's iTunes and sync them to your phone

  • Can anyone help me with messaging?

    can anyone help me with messaging? current 3gs phone with new IOS5 loaded lastnight. now not able to receive text messages. i am able to send though. UGH!!!!!!!

    You can try resetting your iPhone. Make sure to make a backup of your data.

  • HT1695 I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

    I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

    You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.

Maybe you are looking for

  • Error while running uploadJar.sh Utility in OIM

    [Enter Xellerate admin username :] [Enter the admin password :] [[Enter serverURL (Ex. t3://oimhostname:oimportno for weblogic or corbaloc:iiop:localhost:2801 for websphere)]: [[Enter context (i.e.: weblogic.jndi.WLInitialContextFactory for weblogic

  • Domain Agents and E6900 with multiple NICs.

    Hello, I have some issues configuring Sun management Center 3.6 (and 3.6.1) on a network with this characteristics: 2 x E6900 (with 2 Domains each one) 1 x v210 The Server Component of Sun Management Center is installed on the v210. In this machine a

  • Copy long text from PROJ to WBS

    When creating a new project (CJ01) I create new WBS and populate its fields from project automatically. I use enhancement and everything is copying ok except the long text. I do READ_TEXT and it get long text from project (TEXT_HEADER-TDNAME D9999999

  • Event Browser does not list/see FCPX events moved to Drobo S

    Would like to keep all of my FCPX events on Drobo S device, connected via eSATA.  When I try to import directly to Drobo S from camera, Drobo S is not listed as an option in the "save to:" pull down, so I let it import to the default final cut events

  • How to edit PSA and continue the load with corrected data from PSA.

    Hi, Can you guide me on how to edit data in PSA and then continue a load? i.e. if you can provide me with the steps on how to fix a load problem if a load fails. The load fails and Monitor shows red, so how do I fix them in the PSA and then allow the