Can anyone help me with retreiving datalog files?
I have been working to find a way to read an analog input signal as a waveform, and then attempting to save the data (as just the raw data--like ordered pairs) to a file. Obviously, I would like to be able to read this data later on, but I have been unable to do so as of yet. I have been working with saving the data as datalog files. I am attaching both my read and write file VI's, and I wonder if anyone may be able to tell me what is going wrong. The problem seems to be with the read file. The write file generates a file, but when I try to read this file, the read file does not recognize it as a valid datalog file and will not read it. My programs are very similar to those in ....\examples\file\datal
og.llb, but I have not been able to actually read the files I create. I hope I have been clear enough in describing my problem. Thank you for any help you can offer.
Jonathan
Attachments:
Write_Data3.vi 35 KB
Read_Data2.vi 26 KB
Hi Johnathan,
Please be patient with us.
Most of the people answering questions on this exchange do so on a voluntary basis. We do so because we want to help.
Dennis has done a wonderful job of carrying the bulk of this exchange's traffic.
He has answered almost 900 questions in the last two years.
He merits a major award if you ask me. Maybe a "leg lamp" he can display in his front window.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Similar Messages
-
I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?
Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
I have a brand new MacBookProo and I can not open PDF files from my desktop. Can anyone help me with this please?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273 -
I am trying to install lightroom on a new computer and am getting error message 2203.database Cannot open database file system error 2147287037. Can anyone help me with this?
This site has some info
Error 2203 | Install | Creative Suite 4, 5, or 5.5 products or updates -
TS3694 error 21 can anyone help me with this?
Can anyone help me with an error message i get with my iphone, it say error 21 after trying to restore the phone though itunes.
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
Can anyone help me with downloading Creative MediaSource in Windows Vis
I've tried over and over to download Creative MediaSource through the Windows Vista application section for the Zen Touch. It continuosly gives me this error during file extracting. Can anyone help me with this?!
Hi
I have checked to see if there are any Windows 8-8.1 drivers available for your model machine from HP and sadly none are listed , Also even if it had been possible to get driver support for the upgrade you would have still had to pay Microsoft for the upgrade via Retail disk package or an online ISO download .
Kind Regards
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem**** -
Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan
The easiest way is to connect the G5 and your new iMac together via Firewire. Then you can use what is called "Target Disk Mode" which basically makes the G5 look like an external hard drive to your iMac. The potential gotcha is if your new iMac does not have a Firewire port. In that case, you need to get the Apple Thunderbolt-Firewire adapter in order to connect the two machines (as far as I know, all G5's had one or more Firewire ports). I have done this many times, it's easy and works perfectly.
Alternatively, you could connect both Macs to the same network and log into the G5 from your iMac. This involves going into System Preferences > Sharing on the G5 and turning on File Sharing and then logging in from your iMac to the G5 as if it were a server. (Logging in through the Finder or via Go > Connect to Server). This also works fine but it's a little more involved than using Target Disk Mode. I do this all the time and it too works fine.
Either way, once the two Macs are connected, you will use the Finder on your iMac to copy files/folders from your G5 the same as you would from any external hard drive. Regarding iTunes, you could just copy your entire iTunes library over to your iMac being careful to put it in the same relative folder location: /users/yourusername/Music/iTunes This method will preserve your playlists and album art. Alternatively you could go into iTunes and do Add to Library but I'm not completely sure doing it that way will bring over your album art and it certainly won't bring over your playlists.
I see no reason to use a separate external hard drive. It will just double the time it takes to transfer your files because you would first have to copy everything to the hard drive, then in a second step copy everything from the hard drive to your iMac.
Note: In all cases there is the possibility that you may need to change file & folder permissions on the things you copy over so you can access (read & write) to these folders & files once copied to your new iMac. This is not a difficult process. -
Can anyone help me with Bakcing up my MacBook Pro???
Can anyone help me with Bakcing up my MacBook Pro???
Assuming you're looking for recommendations rather than experiencing specific problems, I would advise the following:
Buy 2 external hard disks. You don't say what model of MBP you have, but I would suggest buying the fastest type of drive your MBP supports. So, instead of going for a cheap USB2 drive, I would consider FW800 or Thunderbolt if your MBP supports it. It might cost more but will be faster.
One of the drives needs to be only as big as your internal HD. (Technically, it only needs to be as big as the amount of data you want to back up but to be safe, get one that matches your HD size). This HD can be used for a Bootable Clone. I use SuperDuper from Shirt Pocket, and a Freecom 1GB FireWire 800 drive. You can try it out for free, but it's worth buying a licence because once it's licenced you can do 'smart backups' where it only needs to copy files that have changed. The free version will have to do an entire clone each time which takes longer.
The second drive you should use as a Time Machine backup. The bigger this is, the more backups you can keep, so the further back in time you can go.
The reason to have both is that they both do different things.
SuperDuper is great for doing a complete 'emergency' backup every so often (i.e. before you go away, or at the end of each week, whatever). This disk means that if your MBP is lost, stolen or the HD goes pop, you can recover pretty much the whole system immediately, because you can boot from that drive on any Intel Mac that supports your bus type and OS version. I do an SD clone every so often and keep it hidden, in case anything happens to my MBP.
Time Machine backups are NOT bootable. However, in an emergency you can do a clean install of your OS and then get everything back by migrating from your last TM backup. But the best and most common use of TM backups is simply 'turning back the clock', i.e. you deleted something you wished you hadn't, or even saved over a piece of work you didn't mean to, or installed some software that has caused problems. As long as there was a recent TM backup, you can just get the older version of that file, or revert your whole system. I carry my TM drive around with me in my laptop bag and have it sat there attached and backing up the whole time I'm working.
Well worth having both strategies in place.
As an aside, if you keep confidential files (client or personal) on your MBP and carry it around somewhere like London as I do, it's also worth considering using FileVault so if your lappy gets nicked you don't have to worry about them getting at all your info. And if you have a clone at home, in the worst instance, all you really have to worry about is just buying a new laptop and restoring it. Expensive, sure, but at least your data is safe. -
Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"
You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time. -
Can anyone help me with deleting folders from Appleworks?
I have an older computer that I am giving to a friend and I want to export and remove all of my personal folders in Appleworks (6.2.9). I have not been able to export info and I have also not been able to delete any folders from Appleworks. I can delete all the info in the individual file (ss or wp) but cannot remove the file itself. I don't know what I'm missing but I cannot find info on how to handle this problem. Can anyone help me with this?
Search for the file's name in the Finder, throw it away, and empty the Trash; the Finder is the item in the Dock with the smiling face.
(38373) -
i have an iphone 3gs and everytime i try to restore it on itunes it just keeps saying an unknown erroe has occured (29) can anyone help me with this??
Hello Laura,
Thank you for posting in the Apple Support Communities. I found an article that has information about Error 29:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Best,
Sheila M. -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your helpTry assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance
I am having the same issue, anyone else ?
-
"It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!
Mine does the same thing occasionally, is your phone jailbroken? Sometimes it will work if you delete the book and reinstall it or put your phone into airplane mode then turn it back off.
Maybe you are looking for
-
Setting additional JMS message properties
Hi ALL, I have a requirement where I need to create an adapter module to set additional message property for JMS. The property name has to be Key_String specifically. I am not sure whether to specify this name in the code written for the module or in
-
Query builder bug in outer joins ?
I understood that if you were joining two tables A and B, the following was a LEFT OUTER JOIN SELECT A.COL, B.COL FROM A, B WHERE A.ID = B.ID (+) ie: a LEFT outer join has the (+) on the Right-hand table. However, query builder puts the (+) on the Le
-
IPod flashing orange though disk use is disabled
Hello, my iPod Shuffle (4th gen) is flashing orange (and the windows safely remove hardware thing appears) until I sync it with iTunes or safely remove it (the led changes to solid green and the hardware removal thing disappears), though disk use is
-
Allocation of cost to COPA for 'Third Party' purchase orders
Hello Our purchase department would like to use the purchase order item category 'S' (third party), where the goods are send directly from the vendor to the customer. My problem is that no matter which 'Account Assign Cat' I use in the purchase order
-
how to compile a jar file in AS400????