Can anyone help to check if this seq can open/run in teststand2013 32bit?

this seq was created by V2014 32bit and saved as V2013(5.1X) format.
but it can't be opend in another computer with teststand 2013 32bit and shows error: "your file (saved with TS 2014) is incompatible with our version of Teststand (2013)"
I have to know if it caused by PC.
thanks!
Solved!
Go to Solution.
Attachments:
L281A1303_4213_001.seq ‏29 KB

I have no problems opening it with TestStand 2013, see attached screenshot.
Attachments:
screenshot.png ‏244 KB

Similar Messages

I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?

I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(109318)

HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

Try reentering the password in your iCloud mail settings.

While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.

Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour.

ITunes producer error 3000 character content of element "file_name" invalid. Can anyone help me out? This happens when i try and submit an epub file, i haven't had this before.

Can anyone help me out? This happens when i try and submit an epub file, i haven't had this before. "iTunes producer error 3000 character content of element "file_name" invalid."
This is the full message

You really need to put your codes between the
[\code] tags
see http://forum.java.sun.com/features.jsp#Formatting
for more infoCode tags might make it look a little better, but there's still too darn much code. We're volunteers, after all. It'd be a lot of work to review all of this stuff. Can you demonstrate your problem with something smaller? Learn out how to do a combo box with just a page or two and then appy that to your big problem. That's how I'd do it. - MOD

I just got the iPhone 5. It's completely synced and working. All my contacts are loaded. However, caller ID is not working when I receive a call or a text. Can anyone help me out with this?

I just got the iPhone 5. It's completely synced and working. All my contacts are loaded. However, caller ID is not working when I receive a call or a text. Can anyone help me out with this?

Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

HT1338 I have a macbook Pro i7 mid november 2010. I am wondering if i can exchange my notebook with the latest one. Can anyone help me out with this query please.

I have a macbook Pro i7 mid november 2010. I am wondering if i can exchange my notebook with the latest one. Can anyone help me out with this query please.

You can sell your existing computer using eBay, Craigslist or the venue of your choice. You could then use the proceeds to purchase a new computer.

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

TS1702 Can anyone help? For no reason, I cannot open any of my apps. I can open everything else, just not apps. I have turned the ipad on and off several times, this doesn't work. Does anyone know what to do and why this has happened?

Hello, for some strange reason I cannot open any of the apps I have. I have tried turning the ipad on and off and this doesn't work. I can open everything else (videos, camera, etc) just no apps. Can anyone help please?

If it's the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's all apps including Apple's then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My change to small screen facility has suddenly stopped working. Can anyone help as I use this a lot.

the change to small screen icon in top right hand corner of screen has stopped working. Can anyone help.

When you use the maximize/restore button, the window is restored to its last size. Some websites use a script to enlarge the window to its maximum size so when you switch from maximized to restored you hardly notice any change. You may have to manually resize the window by dragging the lower right corner. Does that help, or is the button just completely not working??

Could anyone help me to get this script working?

I've got this CS2 script that worked in CS3 after putting in the Version 4.0 Scripts folder (never mind the Dutch dialog). But this trick doesn't do it in CS4. I wonder if anyone could rewrite it for CS4...? I know absolutely nothing about scripts, so er... I don't need directions on how to solve this problem: I just need a working script. Thanks in advance!
tell application "Adobe InDesign CS3"
set «class pFnd» to nothing
set «class pChg» to nothing
set mySel to selection
if (length of mySel) = 0 then
display dialog "Fout! Selecteer één (of meerdere) tekstkader(s)" & return & ¬
"met één van de twee pijltjes!"
else if class of item 1 of mySel is not text frame then
display dialog "Fout! Selecteer één (of meerdere) tekstkader(s)" & return & ¬
"met één van de twee pijltjes!"
else
try
if class of item 1 of mySel is text then
set mySearch to «class pTxF» of selection
else if class of item 1 of mySel is text frame then
set mySearch to mySel
end if
«event K2 Find» mySearch given «class for »:",,", «class FRpT»:"<0022>"
«event K2 Find» mySearch given «class for »:"‘‘", «class FRpT»:"<0022>"
«event K2 Find» mySearch given «class for »:"’’", «class FRpT»:"<0022>"
«event K2 Find» mySearch given «class for »:"“", «class FRpT»:"<0022>"
«event K2 Find» mySearch given «class for »:"”", «class FRpT»:"<0022>"
«event K2 Find» mySearch given «class for »:"„", «class FRpT»:"<0022>"
«event K2 Find» mySearch given «class for »:"‘", «class FRpT»:"<0027>"
«event K2 Find» mySearch given «class for »:"’", «class FRpT»:"<0027>"
«event K2 Find» mySearch given «class for »:"´", «class FRpT»:"<0027>"
«event K2 Find» mySearch given «class for »:"<0020><0020>", «class FRpT»:"<0020>"
«event K2 Find» mySearch given «class for »:"^t^t", «class FRpT»:"^t"
«event K2 Find» mySearch given «class for »:"^p^p^p", «class FRpT»:"^p^p"
«event K2 Find» mySearch given «class for »:"^p<0020>", «class FRpT»:"^p"
on error
display dialog "Fout! Selecteer één (of meerdere) tekstkader(s)" & return & ¬
"met één van de twee pijltjes!"
end try
end if
end tell

To give us some background, can you run EtreCheck:
http://www.etresoft.com/etrecheck
and post the results, please?
C.

Could anyone help me out with this please?

Hi all,
I have always had a little problem messing with gradients, when creating images using them I tend to try and make things to perfect and then get very frustrated. This is the case again today
I have attached two images, one light and one darker. Could anyone help me out recreating these using FW please?
I am not after the letters in the center, I am just trying to create the background and the floor of the image with all its gradients and shadows.
Any help greatly appreciated

No I don't, never heard of that

How i can Open/run VBS file

Hi ,
How i can open or run external *.vbs file from director by
pressing in o button on stage
i try mostly every things like:-
- open "XXX.vbs" with "cscript.exe"
- baOpenFile(XXXXXXXXXXXXXXXXXXXXXXXXXXX)
- open moviespath (XXXXXXXXXXXXXXXXXXXX)
no things works could any body can help

If you can double-click on a file and expect it to open, then
baOpenFile
is the best option (assuming you have BuddyAPI installed).
The syntax is like this:
baOpenFile(the moviePath&"XXX.vbs","normal", FALSE)
Check out the BuddyAPI docs for more specifics on that or
what the
different parameters mean.
If you need to specify which program to open the file with,
then the
open..with.. command if best. The biggest problem with that
is that you
need to include the entire pathnames like this:
open the moviePath&"XXX.vbs" with
"c:\myProgram\cscript.exe"
Change the addresses to whatever is correct for your project.
If you
don't know the path to one or both of the programs, then you
are kind of
out of luck.

Can anyone help me out with this icon's meaning and how to fix it?

I just bought a Blackberry Torch 9800.. I have been downloading applications and recently upgraded one of my trial apps to the pro.. but I cannot get the pro version to work. I have activated the account and registered the license key and still nothing... and now I have this crazy icon I cannot seem to find the meaning for it anywhere.. It looks like a phone with a red star above it. I do know that this mean there is an "upgrade" but I don't know what to do to get it to "upgrade" I have deleted and reinstalled the program and still have the trial version... If anyone can help I would certainly appreciate it It is the call control pro application

queendebbie wrote:
It is the call control pro application
Have you contacted the developer of the application for assistance, first?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can anyone help me understand what this problem is with Desktop Manager that I am having???

Hi everyone! I have downloaded the Desktop Manager Software on to my desktop. I've clicked on the "media" option in the main menu.
I am brought to a screen that has 2 options. "Media Manager" and " Blackberry Media Sync".
Now, I want to download themes and wallpaper, but in order to do that, I need to select "Media Manager" correct? ... Unfortunately this option is not available. I have my blackberry on, and is connected to the USB port. I am able to click "start" on the "Blackberry Media Sync" option, but not on Media Manager. If anyone could help me out, this would be greatly appreciated. I am going absolutely insane trying to figure this out! Thx for your help!!!!
Much appreciated
~Linz

It seems clear to me that if you unplug your AirPort Extreme and those Wi-Fi networks still appear, they are not being created by your Extreme but by someone else's router. They won't be useful to you.
To eliminate confusion, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button. In the "Preferred Networks" list, select each Network Name and click the "–" (minus) button. Check the box "Remember networks this computer has joined". Click OK, then Apply.
Then select your PalmSprings network in your Mac's Wi-Fi menu. Ignore any others that may appear there.
If you still have funky problems, try renaming your AirPort Extreme's network to something other than PalmSprings. Use "Palm Springs" (including the space character - spaces are OK) or something else. Other networks with similar or identical names will just confuse things.
Use a non-trivial WPA/WPA2 password for your Wi-Fi network. Give your Extreme base station a non-trivial password as well. These ought to be different from one another, but are not required to be. Doing so will preclude any concern about your network being "hacked".

Can anyone help to check if this seq can open/run in teststand2013 32bit?

Similar Messages

Maybe you are looking for