Can anyone import a midi file into Gb 2.02?

I have tested this on both G5's. I cannot drag in .mid file
cannot do! I even downloaded a midi file from the internet
and ran it thru dent du midi and could not import it into Gb2.02..... if this is true it is a bug noone has reported.
if i cant and you can then i cant imagine why two of my g5's cant do the same task.....
please just try to drag a midi file into GB 202

eight nine ten...
my midi files are from Cubase SL 1.04 exported midi files created about 3 years ago. They are the number 1 type. They are from sequenced works done over 20 years. They imported perfectly until yesterday.This is duplicated on both G5's! Now i havent tried importing in a month. Files i get off the net are fine. They import nicely. If i take these cubase midi exported files and drag over midi du vent they open up in another folder and each aiff comes thru but these when imported are not the midi info i need.
These .mid files that WORKED since GB2 and NOW DONT drag and drop is the reason for panic. I also dont have QT pro as is inferred in your thoughtful message.
1. i think i updated QT 7.02 in the last month.
thats the only change i can think, could that be the fault here? this is quite the enigma among other problems.
I reinstalled cubase sl 1.04 and imported these files and
they opened nicely with each track and its own data.
the problem here doctor is that I cannot import them into this infamous GarageBand 2.02
why buy QT pro?
what else should i do
thanks

Similar Messages

Can't import any .psd files into after effects.

Hello all.
I was using CS5 master collection without issue, for a year.
Decided to upgrade to the CS6 master collection and that’s when the problems began.
For example, I can’t import any .psd files into AE.
All files are saved in RGB mode.
The previous files were made on CS5.
I made a new .psd file in CS6 with just a couple of layers on it, couldn’t import that either.
I’ve tried Ctrl-alt-shift to delete preferences, that had limited success. I can import a file and do a little bit of work on it but as soon as I close the file down and opened it up again, it does not recognise the .psd file.
The errors I’m getting in AE are many
For example:
After Effects warning: Reading past end of file
After Effects error: Could not open intro.psd because it is not a valid Photoshop document
After Effects error: Crash in progress. Last logged message:<8104><dynamiclink><5>C:\ProgramFiles\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro exe
After Effects error: Not enough memory to initialise PSL
I have un-installed and re-installed many times.
I’m using Windows 8, with 32ram. Hard drives C: 100mg, D: 2 Tb
I’ve tried installing on both drives, still the same thing happens.
Does anyone out there in Adobe Land have any ideas?
Totally confused
Cheers,
Gary.

Hi Arie,
Thanks for your response.
It actually happens with every .psd file regardless of size or specs.
All the other programs in the CS6 master collection work fine, except for AE and PS.
I tried the small file. Created a small file, 100 px by 100px 72dpi, just with a gradient background. Same thing, not enough memory to initialise PSL.
I got the adobe cleaner, and re-installed on my system (again) .... same thing.
As long as I open AE with doing ctrl-alt-shift every single time or export layers from PS individually I seem to be OK.
The problem is far from solved, so I guess i just have to put up with workarounds.
Thanks for taking the time to respond

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

How can i import an excel file into formscentral?

how can i import an excel file into formscentral?

Thanks for asking. This is not something we currently support but you can add or vote on feature ideas:
http://forums.adobe.com/community/formscentral?view=idea
If you need to add a new idea click "Create an idea" under "Actions" in the top right.
Perry

Can I import a *.mov file into iPhoto?

Can I import a *.mov file into iPhoto? If so, how?

Yes. Open iPhoto:
File > Import to Library... > select the .move file > Import

How can I import a pdf file into numbers so it will open with a click

How can I import a pdf file into a spreadsheet so that it will open with a click?

You can link to a webpage or an email in Numbers-- that's it.
The best way I found to do this is to enable websharing on your machine (see this article if you are running 10.8: http://lowendmac.com/crews/12lc/web-sharing-mountain-lion.html)
You can then place your pdf files in the folder /Users/<your user name>/Sites/<somefolder>
Then link to this using the url "<your machine name>.local/~<your user name>/<somefolder>/<pdf Name>
My machines name is "Proton" (you can get this from the System Preferences > Sharing pane)
My user name is "wayne"
so I stored a pdf file (DM00027543.pdf) in the folder "/User/wayne/Sites/PDFTest"
and stored the URL "http://proton.local/~wayne/PDFTest/DM00027543.pdf" in the "URL" field of the Hyperlink inspector

I can't import my iTunes files into pages, how can i fix the privileges problem?

when i try to import any mp3 file into a pages document, i get an access privileges error saying it is either corrupt, damaged or "can't be used" because I don't have access privileges. This has happened since I moved my iTunes library to an external drive. Anyone have any solutions? The privileges on both the library folder, and all its files are set to read and write for sharing and permissions.

If you do not have done so, set the "Ignore Ownership" flag on the external drive. YOu can set this flag from the "File > Get Info" panel for the drive.
How is your external drive formatted?
Can other applications open these mp3 files? QuickTime? Do they play in the Finder preview?
Do the filenames contain special charcters?
Léonie

How can I import a .AVI file into my project?

I want to import a .AVI file into my video project but Final Cut Pro will not import it. Final Cut says the file is not recognized but it plays with Quicktime.

Jamison S wrote:
DJ OZA,
Do you get the warning "Media files are not optimized for FCP. Either recapture the media or use Media Manager to crate new copies of the files to improve performance for multi-stream playback."?
What does this mean?
I can import and edit the files no problem either, except for that waring, which concerns me.
It means you will not be able to use the multiclip feature with these files because your Macintosh is working very hard to decode them on the fly. More than one stream will choke your machine.
Your AVIs are visible in FCP because you happen to have acquired an AVI file that uses a codec you have available on your machine.
AVI isn't even supported by Microsoft; it's been a totally concatenated delivery wrapper for more than a decade. It only survives because of entrenchment.
Use Get INfo on one of your AVI clips, figure out what codec was used, use Google to find out what you can about the codec, and decide how you want to proceed. You want to determine what your output is going to be and work backwards from that decision. For instance, if you're going to distribute a standard MPEG2 DVD, you want to edit using conventional DV. Transcode you AVI files to DV using Compressor.
Your easiest solution will be to edit on a PC that does handles the AVI natively or to contact whoever gae you the files and demand they provide you with clips you can edit on a Macintosh.
bogiesan
Message was edited by: David Bogie Chq-1

Can,t import mp3 music files into Lightroom 5 slideshow says it a invalid format,can you give me some guidance please

Until I updated lightroom to 5.6 I had no problem with importing mp3 music files into slideshow but since then it informs me it is not a valid format.
This is very frustrating as have made many slideshow of Weddings,Christenings etc & have been really pleased with the result & so have my customers.
Can any of you guys assist me with this problem
Dave

I have the same problem, i have also contact by the telefone but they have no solution
Jean - Pierre

How can I Import *.Mov video files into LightRoom 5.3 ?

I am having trouble trying to Import *.Mov video files into LightRoom 5.3. It imports preview thumbnails but when I select 'Import ' it now stops and displays an error message.

Why do you ask about Lightroom issues on a Photoshop Forum?

Can I import Mac alias files into Premiere Pro CC?

I am trying to keep my folder structure clean and organized, and am using alias files to gather miscellaneous B-roll video files into a new project folder without removing them from their permenant location and without creating duplicates. Alias files on a mac are basically shortcuts to the original file. FCP 7 and FCP X will import these alias files with no problems, but when I try to import them into Premiere Pro, it says they are unsupported file types. Is there any way to make this work?

Thanks, I was prepared to hear that I would have to make a copy. One note though, is that when i import the alias file into a Final Cut Pro project, it automatically links to the original permanent file location, so if the alias gets deleted, it doesn't matter becuase it is linked to the original.
To answer your question, though, the idea for using alias files is to keep the server clean, so that multiple video editors don't keep copying the same files multiple times into their project folders when they start a new project, and then no one goes back and cleans it up, so you end up with Terabytes of duplicate files on the server. I guess the other option is to train everyone to hunt for the original files themselves and import from that location instead of their own project folders.

How do I import a midi file into garageband for iPad?

I have a midi file (with .mid extension) on my laptop.
Can I import it into Garageband on my iPad 2 and if so how?
Thanks in advance!

Connect your device to your computer.
In iTunes left Pane, click your ipad under Device. On right Pane, click Movie Tab. Check box Sync Movies, then check the movie you want it to be sync, then click the Sync button at the lower right wimdow.

Can't import mp4/mov files into iMovie

I tried to create a new project by importing a .mp4 file from my account on Youtube. It copied the file to the event but didn't create a thumbnail. I did some research and I tried:
-Quitting imovie, changing the name of the event folder, then restarting imovie.
-Importing the .mp4 to a different event folder. Quitting/restarting.
At this point, the thumbnail for the newly imported movie appeared but the other videos that were previously (and successfully) thumbnailed in that event disappeared. I quit/restarted iMovie and all the thumbnails in that event were missing.
Here's what I've tried since then:
-Converting the .mp4 in Handbrake to .mp4 and then importing again. No luck.
-TRYING to convert the .mp4 to .mov in mpeg streamclip. I get an "Audio Decoding Error" when I attempt.
-Converting the .mp4 to .mov while disabling the sound in mpeg streamclip. IT WORKS and iMovie is able to import AND thumbnail.
So it'd appear that there's something wrong with the audio in the .mp4 file. Tried other .mp4 files and none of them were able to be converted or imported. Tried extracting the audio from the .mp4 file via MPEG streamclip and there's the same "Audio Decoding Error." The audio on the .mp4 file is AAC.
OK... It'd appear that I'd need to just import the .mov (no sound) along with the audio from the clip (I've used AudioHijack for that) to edit both in iMovie. The problem is that when I try to export it in iMovie I receive error codes.
This just all seems way, way more complicated that it needs to be. Does anyone have any suggestions on something I haven't tried yet or perhaps some video editing software (non FCE) worth looking into?
Thanks

I was currently having the same issue trying to import into imovie. I have EyeTV Hybrid and when exporting a movie it asks you to select format in which to export it in. I selected m-peg4 and when I tried to import into imovie it was grayed in the finder, so what I did was return to the export feature in EyeTV and exported again under a different format - for imovie. It's exporting as we speak and I feel this will allow me to import properly now. Hope this helps.

Can not import PhotoShop CS3 files into Illustrator CS3

Worked just fine yesterday. I can place a JPG. I typically just drag a PSD into Illustrator. I now get an error message sayng it can not read the file. I have tried placing the file and nothing happens (no messages or warnings).
I tried saving the PSD as a TIF, but no luck here either.
I have tried opening a new file and dragging various PSD files in. It seems that none of the work any longer.
And yes I've rebooted.

I have the exact same problem. I haven't placed PSD files into Illustrator for quite a while, but I just tried it this morning and it doesn't work (just like the OP). I even opened a file about a year old, which used to work just fine, but now the PSD file doesn't appear and I can't re-import it. So it has to be some issue recently introduced.
@Galumph - I have Vista x64 and 8GB of RAM. Is there a specific issue that applies to this particular combo?

What should I do when I can't import mp3 audio files into my Flash library?

Hi!
I am currently working on a flash animation title sequence but for some strange reason I am unable to import the mp3 audio into my flash library. I keep getting an error message stating that it can not import.
Signed,
Confused animator ZagonGirl

The file is protected with DRM, encoded oddly or whatever. Try to convert it in an external program.
Mylenium

Can anyone import a midi file into Gb 2.02?

Similar Messages

Maybe you are looking for