Can anyone interpret this trace for me please
I've had an ongoing issue for about 10 months which looks to me like data loss at peak times. I've got BT working on this but it's a slow and painful process. Outbound tracert from me to an IP address are fine and show slow times but no data loss. I've just done a couple of reverse Trace Routes (Tracert) i.e. in to my public IP rather than out from my computer and got the results below. What I don't know is whether they are reaching me and being blocked by the firewall or whether they are failing before they get to me. An IP lookup shows the last successful addresses are BT infrastructure servers but I can't tell whether they are at my local exchange or not. Thanks in advance.
Here are the 2 sets of results:
Test 1 - Run by a friend
Tracing route to host86-150-49-122.range86-150.btcentralplus.com [86.150.49.122]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 192.168.0.1
2 39 ms 37 ms 38 ms cr4.clber.uk.easynet.net [87.87.253.223]
3 33 ms 33 ms 33 ms fe3-1-3.ar11.bllon.uk.easynet.net [82.111.96.81]
4 34 ms 32 ms 33 ms te0-2-0-2.er11.thlon.ov.easynet.net [89.200.131.89]
5 34 ms 34 ms 33 ms linx7.ukcore.bt.net [195.66.224.56]
6 48 ms 44 ms 74 ms core1-te-0-3-1-0.ealing.ukcore.bt.net [62.172.102.2]
7 38 ms 37 ms 37 ms acc1-10GigE-0-1-0-0.l-far.21cn-ipp.bt.net [109.159.249.16]
8 39 ms 38 ms 38 ms 109.159.249.100
9 36 ms 37 ms 37 ms 213.120.176.177
10 40 ms 45 ms 37 ms 213.120.176.21
11 44 ms 46 ms 41 ms 213.120.177.25
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Test 3 - Conducted from the internet
http://centralops.net/co/Traceroute.aspx
Tracing route to 86.150.49.122 [86.150.49.122]...
hop
rtt
rtt
rtt
ip address
fully qualified domain name
1
1
1
1
70.84.211.97
61.d3.5446.static.theplanet.com
2
1
0
0
70.87.254.1
po101.dsr01.dllstx5.networklayer.com
3
1
1
1
70.85.127.105
po51.dsr01.dllstx3.networklayer.com
4
0
0
0
70.87.253.85
e8-3.ibr03.dllstx3.networklayer.com
5
0
0
0
209.66.99.89
209.66.99.89.available.above.net
6
1
0
0
64.125.27.73
xe-0-1-0.cr1.dfw2.us.above.net
7
1
0
0
64.125.30.78
xe-1-0-0.cr2.dfw2.us.above.net
8
6
6
6
64.125.31.122
xe-4-2-0.cr2.iah1.us.above.net
9
33
57
34
64.125.28.49
xe-2-1-0.cr2.dca2.us.above.net
10
106
133
107
64.125.24.42
xe-4-1-0.mpr1.lhr3.uk.above.net
11
106
107
106
64.125.28.38
so-1-0-0.mpr1.lhr2.uk.above.net
12
107
108
109
64.125.27.150
xe-1-1-0.mpr1.lhr1.uk.above.net
13
116
107
107
195.66.224.69
linx1.ukcore.bt.net
14
112
112
111
62.6.200.102
core2-gig0-10-0-4.ilford.ukcore.bt.net
15
184
140
109
109.159.249.14
acc1-10gige-0-7-0-3.l-far.21cn-ipp.bt.net
16
109
109
110
109.159.249.85
17
109
109
109
213.120.176.177
18
110
109
110
213.120.176.21
19
131
168
213.120.177.9
20
21
22
23
Trace aborted
-- end --
Here is my outbound tracert. I guess that hop 2 is my local exchange. There is no direct match between the IPs outbound and inbound. Hop 5 and 6 on this trace below are within 1 digit of hop 10 and hop 9 respectively of the first of the reverse traces above. I'm not an expert but guess this means they are likely to be co-located? And not my local exchange unless it takes 5 hops to get out of my exchange onto the BT infrastructure.
traceroute to 199.217.10.36 (199.217.10.36), 64 hops max, 52 byte packets
1 api (192.168.1.254) 0.896 ms 0.635 ms 0.633 ms
2 217.32.145.136 (217.32.145.136) 22.803 ms 24.074 ms 25.768 ms
3 217.32.145.206 (217.32.145.206) 25.868 ms 25.140 ms 24.855 ms
4 213.120.177.10 (213.120.177.10) 23.579 ms 23.575 ms 23.913 ms
5 213.120.176.22 (213.120.176.22) 23.895 ms 24.465 ms 23.703 ms
6 213.120.176.178 (213.120.176.178) 24.890 ms 23.638 ms 24.422 ms
7 acc1-10gige-0-7-0-5.l-far.21cn-ipp.bt.net (109.159.249.86) 23.800 ms
acc1-10gige-0-2-0-6.l-far.21cn-ipp.bt.net (109.159.249.101) 24.836 ms
acc1-10gige-0-1-0-5.l-far.21cn-ipp.bt.net (109.159.249.82) 24.035 ms
8 core1-te0-1-0-0.ealing.ukcore.bt.net (109.159.249.21) 26.865 ms
core2-te0-1-0-0.ilford.ukcore.bt.net (109.159.249.23) 28.352 ms
core1-te0-15-0-2.ealing.ukcore.bt.net (109.159.249.17) 27.069 ms
9 core1-xe1-1-0.redbus.ukcore.bt.net (62.6.200.101) 24.961 ms
core1-xe0-0-0.redbus.ukcore.bt.net (62.6.200.73) 26.039 ms 25.040 ms
10 ge-2-1-0.mpr1.lhr2.uk.above.net (195.66.224.76) 27.001 ms 26.359 ms 26.868 ms
11 ge-3-0-0.mpr1.lhr2.uk.above.net (64.125.28.126) 25.717 ms 39.982 ms 26.313 ms
12 so-0-1-0.mpr1.dca2.us.above.net (64.125.27.57) 99.724 ms 98.703 ms 99.029 ms
13 xe-0-3-0.cr1.dca2.us.above.net (64.125.29.17) 99.676 ms 98.223 ms 99.004 ms
14 xe-0-2-0.cr1.iah1.us.above.net (64.125.25.114) 126.086 ms 125.555 ms 125.492 ms
15 xe-1-3-0.cr1.lax112.us.above.net (64.125.26.122) 157.246 ms 157.818 ms 157.267 ms
16 xe-0-2-0.cr1.sjc2.us.above.net (64.125.26.26) 166.464 ms 165.509 ms 165.713 ms
17 xe-1-0-0.cr2.sjc2.us.above.net (64.125.30.138) 164.870 ms 165.932 ms 172.025 ms
18 xe-0-1-0.er2.sjc2.us.above.net (64.125.28.21) 165.686 ms 165.177 ms 165.077 ms
19 209.249.49.10.available.above.net (209.249.49.10) 165.920 ms 166.861 ms 165.738 ms
20 ip10-178.esignal.com (199.217.10.178) 167.362 ms 166.201 ms 167.331 ms
21 ip10-140.esignal.com (199.217.10.140) 166.171 ms 165.839 ms 165.510 ms
22 * * *
23 ip225-4.esignal.com (216.23.225.4) 167.897 ms * 167.373 ms
Similar Messages
-
when i go to my music and play a song it sounds like my headphones are blown but when i play songs on youtube they sound fine, can anyone explain this to me? please and thank you
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
I downloaded the lateest update and I can't turn off my apps like I did on 6os. The 7os is different and I can't seem to find out if apps turn off now by just closing them. Can anyone explain this to me? Please
Double tap the Home button and swipe the app preview page up
iOS 7 also allows apps to run while they aren't open.
You can manage these here:
Settings > General > Background App Refresh -
hello i don't have 5 computers no more so can u deauthorize ALL my pcs please so i can continue to do my work on this laptop PLEASE!!!!
is there anyone there?????
i did as you told me to and it still will not authorize this new laptop
WILL SOMEONE HELP ME!!!!!?????
MY N EW LAP TOP SAYS I HAVE 5 COMPUTERS authorized
wekk im here to twell u i don't have them anymore, can u deauthorize my account so i can do mjy work on here.
i purchased R.Kelly Top FR & B songs on another pc in my house ,but now i;m in my office trying to download my purchase and it won't let me
HELP ME!!!!!!! -
Can anyone fix this.??please help.
i want to learn how to program games in java and i found a good tutorial on 1javast.com on making a space invaders applet. i can get the code to compile but the applet doesnt work properly. does anyone have any ideas? here is the code.
import java.awt.image.*;
import java.awt.event.*;
import java.applet.*;
import java.awt.*;
public class Game extends Applet implements Runnable, MouseMotionListener, MouseListener
BufferedImage bufferdImg;
Graphics2D bufferdImgSurface;
Thread gameThread;
int width=400, height=400, MAX=50, speed=10;
int currentX[] = new int[MAX];
int currentY[] = new int[MAX];
int step=0, // Number of movements left/right
direction=1, // Current left/right direction (0=left, 1=right)
shipX=width/2-10, // Current player X possition
shipY=height-45, // Current player Y possition
mbx=-10, // The mouse position after mouse down, sets the_
mby=-10, // enemy bullet position to this.
randomShoot=0, // Used to work out which enemy is shooting
health=50, // The players health
BNUM=10, // Number of bullets
playing=0; // Are is the game playing (0=Playing, 1=Paused, 2=Game Over, 3=Win)
int bX[] = new int[BNUM]; // Bullet X pos.
int bY[] = new int[BNUM]; // Bullet Y pos.
int ebX[] = new int[BNUM]; // Enemy Bullet X pos.
int ebY[] = new int[BNUM]; // Enemy Bullet Y pos.
long start=0, // Frame start time
tick_end_time, // End frame time
tick_duration, // Time taken to display the frame
sleep_duration; // How long to sleep for
static final int MIN_SLEEP_TIME = 10, // Min time to sleep for
MAX_FPS = 20, // Max frame rate.
MAX_MS_PER_FRAME = 1000 / MAX_FPS; // MS per frame
float fps=0, // Current frame rate
dist; // Distance between 2 points
public void start()
Thread gameThread = new Thread(this);
gameThread.start();
public void init()
currentX[0]=0;
currentY[0]=0;
int row=10, // Current Y position
col=10, // Current X position
count=0; // How many circles have been drawn
//set the co-ordinates for each circle
for(int i=0;i<50;i++)
count++;
currentX=col;
col+=25;
currentY[i]=row;
if(count==10)
row+=25;
col=10;
count=0;
addMouseMotionListener(this);
addMouseListener(this);
for(int i=0;i<BNUM;i++)
bX[i]=-10;
bY[i]=-10;
ebX[i]=0;
ebY[i]=height+10;
public void run()
while(true){ // Starts the game loop
start = System.currentTimeMillis(); // Sets the current time
// Are we playing or is the game over?
if(playing==0)
step++;
for(int i=0;i<MAX;i++)
if(step>15)
if(direction==1)
direction=0;
else
direction=1;
step=0;
for(int j=0;j<MAX;j++)
currentY[j]+=speed;
if(direction==1)
currentY[i]+=speed;
else
currentX[i]-=speed;
for(int i=0; i<BNUM;i++)
if(bY[i]<=0)
bX[i]=mbx;
bY[i]=mby;
mbx=-10;
mby=-10;
bY[i]-=speed;
for(int i=0;i<MAX;i++)
for(int j=0;j<BNUM;j++)
if(!(bY[j]<=0))
dist=(int)(Math.sqrt(Math.pow((currentX[i]+10)-bX[j],2)+
Math.pow((currentY[i]+10)-bY[j],2)));
if(dist<=20)
bY[j]=-50;
currentY[i]=-500;
for(int k=0;k<MAX;k++)
randomShoot=(int)(Math.random()*MAX);
if(currentY[randomShoot]>=0)
for(int i=0;i<BNUM;i++)
if(ebY[i]>=height)
ebX[i]=currentX[randomShoot];
ebY[i]=currentY[randomShoot];
break;
//shooting the alien bullets
for(int k=0;k<MAX;k++)
randomShoot=(int)(Math.random()*MAX);
if(currentY[randomShoot]>=0)
for(int i=0;i<BNUM;i++)
if(ebY[i]>=height)
ebX[i]=currentX[randomShoot];
ebY[i]=currentY[randomShoot];
break;
for(int j=0; j < BNUM; j++) {
if(!(ebY[j]>=height)){
dist = (int)(Math.sqrt(Math.pow((shipX+10)-ebX[j],2) + Math.pow((shipY+10)-ebY[j],2)));
if(dist <= 20){
ebY[j]=height+10;
health-=10;
for(int i=0; i < BNUM; i++){
if(ebY[i] < height) {
ebY[i]+=speed;
if(health <=0)
playing=2;
int count=0;
for(int j=0; j < MAX; j++){
if(currentY[j]<0)
count++;
if(currentY[j]>=340)
playing=2;
if(count==MAX)
playing=3;
} else { }
repaint(); // Redraw the screen
public void paint(Graphics g)
update(g);
public void update(Graphics g)
Graphics2D g2 = (Graphics2D)g;
// Set the background color.
bufferdImgSurface.setBackground(Color.black);
// Clear the applet.
bufferdImgSurface.clearRect(0, 0, width, height);
bufferdImgSurface.setColor(Color.green);
//(X pos, Y pos, Width, Height)
for(int i=0; i < MAX; i++)
bufferdImgSurface.fillOval(currentX[i], currentY[i], 20,20);
// Draw the read ship (a square)
bufferdImgSurface.setColor(Color.red);
bufferdImgSurface.fillRect(shipX, shipY, 20, 20);
for(int j=0; j < BNUM; j++){
bufferdImgSurface.setColor(Color.yellow);
bufferdImgSurface.fillOval(bX[j], bY[j], 5,5);
bufferdImgSurface.setColor(Color.blue);
bufferdImgSurface.fillOval(ebX[j], ebY[j], 5,10);
// Draw a bottom line to our window
bufferdImgSurface.setColor(Color.red);
bufferdImgSurface.drawString("_________________________________________________________",0,375);
if(playing==1)
bufferdImgSurface.drawString("PAUSED", width/2-10, 390);
else if(playing==2)
bufferdImgSurface.drawString("****Game Over****", width/2-10, 390);
else if(playing==3)
bufferdImgSurface.drawString("****You Win!****", width/2-10, 390);
for(int i=0; i < health; i++)
bufferdImgSurface.drawString(" |", (2*i), 390);
// Draw the buffered image to the screen.
g2.drawImage(bufferdImg, 0, 0, this);
public void mouseMoved(MouseEvent e) { shipX=e.getX()-5; }
public void mouseDragged(MouseEvent e) { shipX=e.getX()-5; }
public void mouseClicked(MouseEvent e) {
mbx=e.getX();
mby=shipY;
public void mousePressed(MouseEvent e) {
mbx=e.getX();
mby=shipY;
public void mouseEntered(MouseEvent e) { playing=0; }
public void mouseExited(MouseEvent e) { playing=1; }
public void mouseReleased(MouseEvent e) { }this doesn't come close to compiling
-
Can anyone interpret this Aperture crash log and suggest an idea?
Hi, for a very long time now, I can only open Aperture while pressing the SHIFT key. There are 49 previews that otherwise attempt to be built, which I assume are the cause of the crash. If I press SHIFT while booting and disable preview generation, then the crash does not happen, BUT I cannot have my automatic preview generation. This is critical since I travel a lot and this allows me to show my work and process keywords and captions while traveling. ANY idea is VERY welcome and appreciated it! Thanks. Martin.
The message in the console is this:
===== Monday, September 10, 2007 4:23:17 PM America/Los_Angeles =====
Aperture(866,0x1882800) malloc: * vm_allocate(size=8421376) failed (error code=3)
Aperture(866,0x1882800) malloc: * error: can't allocate region
Aperture(866,0x1882800) malloc: * set a breakpoint in szone_error to debug
Aperture(866,0xb9e25c00) malloc: * vm_allocate(size=8421376) failed (error code=3)
Aperture(866,0xb9e25c00) malloc: * error: can't allocate region
Aperture(866,0xb9e25c00) malloc: * set a breakpoint in szone_error to debug
Aperture(866,0xb9e25c00) malloc: * vm_allocate(size=8421376) failed (error code=3)
Aperture(866,0xb9e25c00) malloc: * error: can't allocate region
Aperture(866,0xb9e25c00) malloc: * set a breakpoint in szone_error to debug
Sep 10 16:23:20 tinchohs-computer crashdump[871]: Exited process crashed
Sep 10 16:23:20 tinchohs-computer crashdump[871]: crash report written to: /Library/Logs/CrashReporter/Exited process.crash.log
The message in the *crash log* is this:
Host Name: tinchohs-computer
Date/Time: 2007-07-15 12:49:54.472 -0300
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 324
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0xb1c1d3a1
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0xb1c1d3a1 ebx: 0x15d12160 ecx: 0x000376d8 edx: 0x01848400
edi: 0xb1c1d3a9 esi: 0x003f8a80 ebp: 0xb0332ea8 esp: 0xb0332e74
ss: 0x0000001f efl: 0x00010206 eip: 0x90a594c7 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-25 11:05:25.204 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 491
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x93f4a9c7 ecx: 0xb022b4dc edx: 0xf3343cb0
edi: 0xf3343d30 esi: 0xb022d544 ebp: 0xb022b308 esp: 0xb022b2e0
ss: 0x0000001f efl: 0x00010282 eip: 0x93f4aa06 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-26 20:08:37.489 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 970
Thread: Unknown
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000002
Code[1]: 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x20113d80 esi: 0xa080b1c0 ebp: 0xb05a7d98 esp: 0xb05a7d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-26 20:08:37.490 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 970
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x20113d80 esi: 0xa080b1c0 ebp: 0xb05a7d98 esp: 0xb05a7d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-26 21:01:08.897 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 1376
Thread: Unknown
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000002
Code[1]: 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x18996300 esi: 0xa080b1c0 ebp: 0xb0526d98 esp: 0xb0526d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-26 21:01:08.900 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 1376
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x93f4a9c7 ecx: 0xb021a4dc edx: 0x1ec6bae0
edi: 0x3c5f0aa0 esi: 0xb021c544 ebp: 0xb021a308 esp: 0xb021a2e0
ss: 0x0000001f efl: 0x00010282 eip: 0x93f4aa06 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-26 21:01:08.897 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 1376
Thread: Unknown
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000002
Code[1]: 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x18996300 esi: 0xa080b1c0 ebp: 0xb0526d98 esp: 0xb0526d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-27 08:58:45.832 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 458
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x93f4a9c7 ecx: 0xb021a4dc edx: 0x8bb39840
edi: 0x8bb398c0 esi: 0xb021c544 ebp: 0xb021a308 esp: 0xb021a2e0
ss: 0x0000001f efl: 0x00010282 eip: 0x93f4aa06 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-07-27 08:58:45.832 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 458
Thread: Unknown
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000002
Code[1]: 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x1a7f57e0 esi: 0xa080b1c0 ebp: 0xb05a7d98 esp: 0xb05a7d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-08-26 20:59:31.655 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 305
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x1c521870 esi: 0xa080b1c0 ebp: 0xb05a7d98 esp: 0xb05a7d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-08-26 20:59:31.656 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 305
Thread: Unknown
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000002
Code[1]: 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x1c521870 esi: 0xa080b1c0 ebp: 0xb05a7d98 esp: 0xb05a7d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-08-26 20:59:31.655 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 305
Thread: Unknown
Exception: EXC_BREAKPOINT (0x0006)
Code[0]: 0x00000002
Code[1]: 0x00000000
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000824 ebx: 0x9082277e ecx: 0x01800000 edx: 0x00000000
edi: 0x1c521870 esi: 0xa080b1c0 ebp: 0xb05a7d98 esp: 0xb05a7d20
ss: 0x0000001f efl: 0x00000246 eip: 0x9082298f cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
Host Name: tinchohs-computer
Date/Time: 2007-09-10 16:23:20.342 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Exited process
Path: Exited process
Parent: kernel_task [0]
Version: ??? (???)
PID: 866
Thread: Unknown
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000004
(null)
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x93f4b9c7 ecx: 0xb021a4dc edx: 0xd74ace90
edi: 0xd74ad1b0 esi: 0xb021c544 ebp: 0xb021a308 esp: 0xb021a2e0
ss: 0x0000001f efl: 0x00010282 eip: 0x93f4ba06 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:jrg_uk wrote:
That looks like a kernel panic log (where the screen switches to messages in various languages, on a grey background).
If it is, it's very likely that you've got some faulty memory in your machine, or some other hardware fault, that Aperture is triggering when it runs (Aperture is a very heavy user of system resources and other posters to this forum have found that it finds hardware problems they didn't think they had.)
It does not seem to be a kernel panic. It only shuts down Aperture but without any other noticeable effect. Thanks. -
Can anyone solve this puzzle for me..?
Hello everybody,
I've got the following question in one of the mock tests for Java certification exams.
the output that I was expecting is 10010
but is shows 10020 as output.
can anybody explain..!
class ValHold{
public int i = 10;
public class A{
public static void main(String argv[]){
A o = new A();
o.amethod();
public void amethod(){
int i = 99;
ValHold v = new ValHold();
v.i=30;
another(v,i);
System.out.print( v.i );
}//End of amethod
public void another(ValHold v, int i){
i=0;
v.i = 20;
ValHold vh = new ValHold();
v = vh;
System.out.print(v.i);
System.out.print(i);
}ThanksHello everybody,
I've got the following question in one of the mock
tests for Java certification exams.
the output that I was expecting is 10010
but is shows 10020 as output.
can anybody explain..!
class ValHold{
public int i = 10;
public class A{
public static void main(String argv[]){
A o = new A();
o.amethod();
public void amethod(){
int i = 99;
ValHold v = new ValHold();
v.i=30;
another(v,i);
System.out.print( v.i );
/End of amethod
public void another(ValHold v, int i){
i=0;
v.i = 20;
ValHold vh = new ValHold();
v = vh;
System.out.print(v.i);
System.out.print(i);
Here we get the output 100
The reference v in this method is local to this
method. It is copy of the reference from amethod.
New object is created and assigned to vh. The reference v points to this second object.
After returning from the method, the reference v in amethod still points
to first object where value of i is still 20
>
>
Thanks -
Can anyone interpret this kernel panic?
Hello,
Just got my first kernel panic on my MacBook Pro in about a year and a half. I've restarted it a few times, but I keep getting the kernel panic—especially when I launch iTunes. I'd really appreciate it if someone could help me. I'm a relief worker in sub-Saharan Africa and don't have the resources/wherewithal out here to take care of this myself! Thanks!
The kernel panic is as follows:
Sat Feb 21 10:21:29 2009
panic(cpu 1 caller 0x001A8CD4): Kernel trap at 0x001cb13b, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0xeeeeef0e, CR3: 0x00fd8000, CR4: 0x00000660
EAX: 0x0000d106, EBX: 0xeeeeeeee, ECX: 0x068fb010, EDX: 0x33f89004
CR2: 0xeeeeef0e, EBP: 0x3fe2b9e8, ESI: 0x00000010, EDI: 0x7ec98b85
EFL: 0x00010286, EIP: 0x001cb13b, CS: 0x00000008, DS: 0x03c30010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x3fe2b7b8 : 0x12b0fa (0x459294 0x3fe2b7ec 0x133243 0x0)
0x3fe2b808 : 0x1a8cd4 (0x4627fc 0x1cb13b 0xe 0x461fac)
0x3fe2b8e8 : 0x19ede5 (0x3fe2b900 0x3fe2b9a8 0x3fe2b9e8 0x1cb13b)
0x3fe2b8f8 : 0x1cb13b (0xe 0x3fe20048 0x70 0x6900010)
0x3fe2b9e8 : 0x1d482d (0x3fe2bddc 0x3fe2bf08 0x68fb010 0x45f4144)
0x3fe2ba78 : 0x1d5731 (0x3fe2bddc 0x100 0x3fe2bdfc 0x0)
0x3fe2bb38 : 0x1e4345 (0x3fe2bddc 0x3e462d8 0x1 0x0)
0x3fe2bd88 : 0x1e4974 (0xb0080648 0x0 0x0 0x0)
0x3fe2bf48 : 0x1e4a57 (0xb0080648 0x0 0x0 0x0)
0x3fe2bf78 : 0x3dddda (0x3e46280 0x45f4040 0x45f4084 0x0)
0x3fe2bfc8 : 0x19f2c3 (0x4700ba0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0080848
BSD process name corresponding to current thread: mdworker
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro2,2 (Mac-F42187C8)meta tags and searches thru files/documents
Specifically, SpotLight uses the process mdworker to index files.
Might want to post in the Leopard forums as this is really an OS issue rather than a specific MacBook Pro hardware issue. -
Apply overrides (Can anyone «cook» this script for me?)
Hi, everybody!
Here I am again asking for something: I need a script that clears all overrides that exist in a certain style paragraph that was applied thousands of times in a very long Indesign document.
Thank you in advance
MariaIf it's just one paragraph style: use Search and Replace. Put the same paragraph style in both Search and Replace formatting fields, and make sure there is no text at all in the text edit fields. It seems you want to replace the style with the exact same style ... but in this particular case, every manual override gets fried (to continue your cooking analogy ).
-
Can anyone answer this question for me
okay so i have a mid 2012 macbook pro and being a student myself i travel 4 days a week to and from college with my mac anyway while i was in class the other day i placed my laptop onto the desk and i must have put my mac onto my grit and i have slight airline scratch on the bottom caseing i called my apple store and i asked if the case can be replaced the guy said yes it can be but i will need to book an appoment with a genius but as you know apple apple macs laptops have the designed by apple in california and serial number etc on them if i was to buy a new case for it from apple would it contain these any ideas and help is allways welcome. thanks Ryan
ryan678 wrote:
okay so i have a mid 2012 macbook pro and being a student myself i travel 4 days a week to and from college with my mac anyway while i was in class the other day i placed my laptop onto the desk and i must have put my mac onto my grit and i have slight airline scratch on the bottom caseing i called my apple store and i asked if the case can be replaced the guy said yes it can be but i will need to book an appoment with a genius but as you know apple apple macs laptops have the designed by apple in california and serial number etc on them if i was to buy a new case for it from apple would it contain these any ideas and help is allways welcome. thanks Ryan
I'm sorry but it is very difficult to understand your very long one sentence post. Are you asking what information will be contained on the case? Or are you asking how to go about changing the case? Maybe you're asking if it is worth replacing the case because of a scratch. Or, are you asking if the new case will be designed in California?
Try rephrasing your post. -
I can't access my old behance account, can someone sort this out for me please?
Hi I can't access my old behance account and every time I tried to log in it took me straight to Adobe creative cloud.
Hello there,
I'm having the problem trying to login to my old Behance account. I recalled that I didn't change my email address yet I'm unable to login with the existing email address that was used with Behance account. I tried to use Adobe ID forgot password but got nothing. I also can't visit Behance Help which is down right now. -
Can anyone explain this to me? please! :D
Code Process Original Route Map Last Route Map Update Location Status Exception
PUP Pick up 06 Jul 2010 14:00 06 Jul 2010 12:00
REW Arrival at KN origin 07 Jul 2010 02:00 06 Jul 2010 23:40
DEH Departure to airline 07 Jul 2010 23:49 07 Jul 2010 23:49
DEP Departure 08 Jul 2010 06:30 08 Jul 2010 06:30 Hong Kong 08 Jul 2010 06:30
RCF Checked in at carrier destination 11 Jul 2010 19:40 14 Jul 2010 02:10 Luxembourg 10 Jul 2010 06:10
AWD Docs (or efile) available at Dest. 12 Jul 2010 10:30 14 Jul 2010 10:30 08 Jul 2010 09:06
ATB Shipment advice 3rd party 12 Jul 2010 16:30 14 Jul 2010 16:30 10 Jul 2010 06:10
DTB Docs release/hand over to 3rd party 13 Jul 2010 08:00 15 Jul 2010 08:00 10 Jul 2010 06:10No, but since virtually all of your posts have something to do with the delivery of your iPhone 4, I bet it has something to do with the delivery of your iPhone 4. I'd suggest giving it a rest.
-
Can anyone explain this to me, please. It's a static section question.
Can anyone explain this to me, please. It's a static section question.
I came across the following style of programming recently and I would like to know what the Static section is actually doing in the class. Thx.
Here is the code.
public class ClassA {
private static Hashtable ClassAList = new Hashtable();
private ClassB cB;
private Vector goodLink;
private Hashtable classCList;
static
ClassA cA = new ClassA();
ClassAList.put("whatever", cA);
public static ClassA getClassA()
return (ClassA) ClassAList.get("whatever");hi,
The static section shall be loaded before it's constructor is called. (i.e at the time of loading the class). Therefore making it available for any other objects to call.
hope this clarifies ur question
prasanna -
hi can someone keep this simple for me! my iPhone is due for a renewal. but my old laptop that it is backed up to no longer works! how do i go about saving all my songs pics etc to a new laptop without losing anything? please help!!!
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
Maybe you are looking for
-
Missing fields in the output while using SAP SCRIPT
Hi, I am working on an issue where we are using F110 to print some checks, and for this we have created a custom sap script and we are using a std driver program RFFOUS_C, we have also maintianed a custom subroutine pool ZRFFOUS which will retrieve t
-
Looking for HP Basic Driver only for hp 2610 all-in-one printer
I have windows 7( Just recently installed) and a HP 2610 all-in-one printer. I just wanted to download the printer driver only and not the HP Photosmart and office software Suite. This webside say the printer driver only is availble as a separate dow
-
I want to upgrade my iPhone to the 5s. What do I need to bring to the Apple Store to do this?
I plan on signing another 2 year contract. Also, will my plan with Sprint have to change or will everything stay the same?
-
How do i temporarily close Firefox in order to install Adobe Flash Player
i am tryng to install Adobe Flash Player and it has said to close the Mozilla Firefox in order to complete installation. Can you tell me how to close the Firefox. Thank you.
-
Suse 8.2 and calendar (open linux)
Are there any users that have calendar on a suse 8.x box? I am getting ready to install calendar on suse, is there anything that I should look out for?