Can anyone make distributed processing work?

I have two high-spec iMacs, connected via Thunderbolt and ethernet. I go through the Compressor set up for group transcoding, tried many different settings combinations - it NEVER uses the second machine in the transcode.
Episode Pro on same machines does it no problem. Has anyone got this working in Compressor?

I haven't tried with the 4.1 versions because the only machine I could test it with is running an earlier OS/ It's purposely frozen in that state and will be some time before it's upgraded. I have considered installing 10.9 on an external drive with a FCP X and Compressor and booting from that. If I have the time I'll try it and post the results.
In the meantime, I hope someone else will have some theories on why your processing setup isn't working and chime in.
Finally, just to add I think a lot of folks have taken the simpler route and opted for multiple instances to speed up their work.
Russ

Similar Messages

Can anyone make --this fix-- work for the FONT rendering issue?

I found this bug report and proposed fix on the webkit buglist:
http://bugs.webkit.org/show_bug.cgi?id=14070
Here is a link that one says can be used to fix the
rendering issue with bold fonts.
If anyone can make this work for Safari 3 on XP please let me know....
Here are the text and link to the how to:
You can fix rendering issues by changing language for non-Unicode programs. The
instruction:
http://www.microsoft.com/globaldev/handson/user/xpintlsupp.mspx#EVE
You should restart system after applying setting.
Hope this helps someone
If not, then call apple support and complain....
maybe if their support phones are getting hot... then they
will fix this horrible bug

I don't believe this is a support issue, it's rather a Bugdev issue. Use the Bug-Report field in Safari to report this directly to the engineers. I also think the bug is known and will be solved, it's therefore not really in the range of AppleCare. (Beta Software is usually unsupported!)
MacBook Pro, MacBook, ModBook, iMac, Mac mini, PowerMac G5, iBook, Apple TV Mac OS X (10.4.9)

I just bought a (used) Iphone 3gs for wife and it had angry birds and $89 Navigation on it (I paid extra for it). Once updated and logged into my I-tunes it no longer works? How can I make those apps work?

I just bought a (used) Iphone 3gs for wife and it had angry birds and $89 Navigation on it (I paid extra for it). Once updated and logged into my I-tunes it no longer works? How can I make those apps work?

Apple doesn't have anything to do with this other than enforcing the DRM protection. The developers of this content expect to be paid if someone wants to use their content. When you purchase content in the app store, you purchase a license to use the content. This license does not permit you or anyone else to resell or give this content away. The individual you purchased the phone from simply does not have the right to sell or give away any purchased content on the phone. You were deceived.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Can anyone make a PKGBUILD for Novel iFolder and Novel consoleone ?

Like in subject. I tried install it from Novel homepage, but i have problem with make dependiences and this two package, can anyone make good PKGBUILD for new version ? In AUR i found PKGBUILD's but the mirror doesn't work and i can't find another mirror. Thanks Igor. Have a nice day !

Yes, but i saw many rpm package, and source code. If you talk about license there is oportunity to get free license for 30 or 60 day's. Thanx for respone.

Can anyone make a recommendation on the purchase of an external hard drive for my Macbook Pro? I am currently using OS 10.6.8 because I can't upgrade until I clean out my start up disc space. I have a ton of pictures to transfer. Thanks!

Can anyone make a recommendation on the purchase of an external hard drive for my Macbook Pro? I am currently using OS 10.6.8 because I can't upgrade until I clean out my start up disc space. I have a ton of pictures to transfer.Thanks!

best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package) $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

I can't migrate from a time machine Back up. I select my TC and it says "some backups can't be opened." My HD failed and I'm Trying to get everything back... Can anyone make a suggestion?

I can't migrate from a time machine Back up. I select my TC and it says "some backups can't be opened. Make sure that all of your network devices are connected and turned on. It appears that some backups are already in use. If you don't see the backup you need, make sure it is not currently mounted by another machine and try again."
My HD failed and i installed a new one... I'm Trying to get everything back... Can anyone make a suggestion?

Read the section E about restore issues.
http://pondini.org/TM/Troubleshooting.html
But you should be able to mount the sparsebundle and backup the major items if they are not damaged. You might also do a disk verify to see if the corruption can be repaired.
Have a look here also for restore of selected items.
http://pondini.org/TM/FAQ.html

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work????

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-Esteban

Hello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

I bought an Apple Airport and the light is flashing a yellow light! I did this because I live in a basement and the modem is in the first floor. I followed the instruction manual and the Airport is not working still. how can I make my Airport work?

How can I make the Airport work?

If there is a modem and not a router on the first floor, then the only possible way to get it to work would be an Ethernet cable connection between the modem and the AirPort Express device.
I think you need to describe your situation in more detail.

Can anyone recommend a process for moving just my OS and Adobe Photoshop and Lightroom to the SSD?

I have an early 2011 MBP running Mountain Lion. I just removed the superdrive and added an SSD. I want to use it to boot from and also run Photoshop and Lightroom from. Can anyone recommend a process for moving my OS and those programs to the SSD?

I'm assuming your doing this because of data you don't want pernament on the SSD as they can' be scrubbed like hard drives can.
Disconnect any other drives.
1: Format the SSD 1 partition, click the box, option GUID and OS X extended journaled as the format.
2: Download Carbon Copy Cloner.
3: Clone your MacintoshHD partition to a blank powered external drive also formatted the same as above.
4: Hold option/alt key and boot the machine (wired or built in keyboard) and then select the clone to boot from,
5: Once in the clone, click it's drive name and change the name if it's the same as the OS X boot volume.
6: On the clone, head to System Preferences > Accounts and create a new Admin account.
7: If you need to move files between accounts on the clone, see this. Combine two+ Users Accounts on the same machine (be careful that your selecting the correct clones other account)
8: Once your moving files on the clone is complete, then log into the new user account and delete the old user account.
9: Use Carbon Copy Cloner to clone the clone to the SSD.
10: Use Disk Utiltiy to repair permissions on all drives.
The SSD should be moved to the HD slot and the HD to the optical slot and used as a file drive.
CCC has a option to not include certain folders like the other user account you don't want, however I tend not to recommend things that are not too far out of line with Apple's ways of doing things as it usually results in bad things occuring. Somewhere in OS X it's recorded of that other user account, so it might still show up in logins and such.
Also you may want to transfer some files to the other account, so that's why I recommend this method.
Good Luck

I m new to multisim, i need pcb layout of a cicuit. can anyone make it? i m attaching the circuit diagram.

I m new to multisim, i need pcb layout of a cicuit. can anyone make it? i m attaching the circuit diagram. plzzzzzz, its urgent. i have to submit the project in my college. plz try to make it single layer.
sad.hussain9136

Hello,
Multisim is not the right software for PCB layout design. That would be Ultiboard. With the integration between the 2 you can create your circuit in Multisim and transfer it to Ultiboard to easily design your one layer board. There are a lot of tutorials online that can help you do this. If you feel you need instruction, you can always book a class (online or on-site) to learn Multisim/Ultiboard.
Kind Regards,
Miguel V
National Instruments

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

Can anyone make sense of my speed test results ple...

Hiya,
I signed up to Bt broadband around a month ago and we have been so disappointed in the poor speeds we receive.
We previously had tiscalli and wish we never changed.
I have run the bt speedtest and also a speednet test.
Can anyone make sense of them?
The internet is sometimes useful but other times is ridiculously slow.
FAQ
<script type="text/javascript">// paintProgressAndMessageOnBar(-1 ,"Last Test Required" ); // </script> Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
3361 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 3361 Kbps
For your connection, the acceptable range of speedsis 1000-7150 Kbps.
Additional Information:
Your DSL Connection Rate :4168 Kbps(DOWN-STREAM), 792 Kbps(UP-STREAM)
IP Profile for your line is - 3500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 12.97:22.94:64.08 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
595 Kbps
0 Kbps
792 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 595 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 792 Kbps
http://www.speedtest.net/result/951870565.png
this is it on the fast day,on the slower days i cant even access the forum.
Any ideas what the results mean?
Help would be greatly appreciated.

yes we did just reset the hub,to check our settings it asked for password but wouldnt accept the one BT gave us so said we had to reset.
is there anyhting we can do to improve noise margin-could this be the cause?
Sorry for allt he questions and thanks so much for all your help
I dont know if this makes any difference but these are the results now
ADSL line status<script type="text/javascript">// var trClass = ["odd", "even"]; var td1 = ["w3", "Line state", "Connection time", "Downstream", "Upstream"]; var td3 = ["w3", "VPI/VCI", "Type", "Modulation", "Latency type", "Noise margin (Down/Up)", "Line attenuation (Down/Up)", "Output power (Down/Up)", "Loss of Framing (Local)", "Loss of Signal (Local)", "Loss of Power (Local)", "FEC Errors (Down/Up)", "CRC Errors (Down/Up)", "HEC Errors (Down/Up)", "Error Seconds (Local)"]; var td2 = ["", "Connected", "0 days, 0:16:56", "3,987 Kbps", "776 Kbps"]; var td4 = ["", "0/38", "PPPoA", "ITU-T G.992.5", "Interleaved", "15.2 dB / 5.7 dB", "49.0 dB / 27.2 dB", "19.3 dBm / 12.1 dBm", "0", "0", "0", "0 / 2", "1 / 2147480000", "nil / 2960", "1"]; // </script>Connection information<script type="text/javascript">// createTable("normal", trClass, td1, td2); // </script>
Line state
Connected
Connection time
0 days, 0:16:56
Downstream
3,987 Kbps
Upstream
776 Kbps
ADSL settings<script type="text/javascript">// createTable("normal", trClass, td3, td4); // </script>
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
15.2 dB / 5.7 dB
Line attenuation (Down/Up)
49.0 dB / 27.2 dB
Output power (Down/Up)
19.3 dBm / 12.1 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 2
CRC Errors (Down/Up)
1 / 2147480000
HEC Errors (Down/Up)
nil / 2960
Error Seconds (Local)
1
<script type="text/javascript">// var showButton = new Button("show","","Hide Details", function(){GoAndRemember('bb_dsl.lp','');}); // </script>
Hide Details

How can I make my dictionary work?

How can I make the dictionary work in my ipad2?

there is no dictionary that comes with the ipad, you download a 3rd party app though.
Was that your question?

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Can anyone make distributed processing work?

Similar Messages

Maybe you are looking for