Can anyone recomend the SD Configuration Package from ...

http://www.sap-topjobs.com/SpecialPP/sapsd20071919.html
Are the powerpoint presentations and documents worth the cost (400 Us Dlls)? Has anyone seen the Pwp presentations from this package? I need to provide an introduction to JDE Consultants ( Organization, Master Files and Documents Flow). My client is moving from JDE to SAP.
Do you guys know about any other source of training material for SD ?

If you can get them, I would recommend the LaCie cases. I have four of them and they are very quiet because they have no fans. The are very well made and use the aluminium case to desipate heat. I purchased two 300Gb models with FW800, FW400 and USB 2.0 connectors and found two other cases online that I put a 250Gb and a 120Gb drive that I had into them.
Great cases, good luck.
Mike

Similar Messages

Can anyone recomend the right ext FW hard drive enclosures

Hi
i have to remove 5 drives from a dead G4 tower and i want to get a G5, so i need a external encloser and a silent one for recording.
Is there some solution for this or a work around, i cant record with fan noise and i like to work in front of the mac.

If you can get them, I would recommend the LaCie cases. I have four of them and they are very quiet because they have no fans. The are very well made and use the aluminium case to desipate heat. I purchased two 300Gb models with FW800, FW400 and USB 2.0 connectors and found two other cases online that I put a 250Gb and a 120Gb drive that I had into them.
Great cases, good luck.
Mike

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

I stream Internet radio from my iPad air to Bluetooth speaker. Can anyone suggest the best EQ app to use to enhance the sound. Thanks

I stream Internet raidiot from iPad air to Bluetooth speakers. Can anyone suggest the best EQ app to use to enhance the sound.
THanks

Yeah, I know I can restore it, but I might as well go ahead and try. I just finished a backup for icloud and itunes to make sure, I'll go ahead and restore it and set it up as new and see how that works. Seems like I have no other options at this point, I'd still like to know what they did with the Download tab in itunes store, if they removed it or if I'm just overlooking it.

Hi, Can anyone encounter the problem that you couldn't update your apps from Mac book pro??

Hi, Can anyone encounter the problem that you couldn't update your apps from Mac book pro??
Currently, my mac can't update any of the software from App store as well as bulit in software like garageband.

yeah...
i did that but it didn't work.
Every times, i click on the software updates, software updates dialog box is popping up and
checking for new updates.
After that, acknowledged me whether i want to update or not.
once, i click on "install".
it appears following message.
"A network error has occurred. Check your Internet connection, and then try again."
i totally can access to Internet as i can browser all the websites.
Please help me, is it a "virus" or "malware" causing my mac?.
i just changed a new mac recently and having this problem

I am looking for a system to balance a rotor of turbocharger running at high speed at the minute i use a soundcard base system but am looking to upgrade can anyone recomend a setup thanks

hello i am looking to upgrade my balancing system,at the minute i use a soundcard base system but looking for a system that may improve my resaults i use the system to balance turbo charger spindles can anyone recomend a system?

Duplicate Post.
Please don't start a new thread with the same question!

How can I download the Phonegap integration Package ?

Hi All, I tried to download the "Phonegap integration package" from the package share, but it returns an error, and gives a 404.
Is anyone else able to download it ?
Amith

Assuming you mean the CQ 5.5 Phone Gap Integration, try following URL [1] (change for your own installation), choose the Assets Tab and can you download to disk?
[1] http://localhost:4561/crx/packageshare/index.html/content/marketplace/marketplaceProxy.htm l?packagePath=/content/companies/public/adobe/packages/cq550/mobile/PhoneGap-integration

Smuxi 0.8 Release - Can anyone update the PKGBUILD?

Hi all,
Sorry for asking this, but I'm not familiar with editing/creating PKGBUILDS, though I can give it a try.
The current PKGBUILD for smuxi is outdated and smuxi is really great.
Can anyone update the PKGBUILD?
Is there any resource available to teach how to create/edit/modify the pkgbuild?
Regards,
-aurocha

when you request a PKGBUILD, its considered courteous to atleast provide a link to the package/application that you want built.
Also if it is already in AUR, then you should put a comment on the AUR page. If still nothing happens, then you should send an email to the ML and ask for it to be orphaned.
Since it's already in AUR, you can also edit the PKGBUILD to your liking and install it or simply install from source.
As always the choices are many.

Re:How can we delete the concurrent node entry from the FND_NODE table

HI ,
11.5.10.2 on Oracle Solaris on SPARC (64-bit) .
How can we delete the concurrent node entry from the FND_NODES table without running Autoconfig.
Currently we are having 3 nodes RAC and we are deciding to remove one node from the RAC and all 3 nodes are registered as concurrent node with application but concurrent manager is running only on one node.
Lot of the custom configuration we did it at application web tire level. If we run the Autoconfig at that time we need to redo those changes again that we are trying to avoid.
Regards .

we are trying to avoid to run FND_CLONE.setup_clean because it will delete all the nodes entries from the FND_NODES.If those entries are invalid then they should be deleted.
Running AutoConfig after purging the table will populate it with the correct entries.
In order to populate the nodes entries again we need to run autoconfig and it will change the server id in fnd_nodes and then we need to redo the ADI client configuration on users PC and redo all the changes that we made in jserv and webserver.For ADI Clients, you should use the correct server ids which will be populated in the table for you once you run AutoConfig.
For jserv configuration, you can refer to (Customizing an AutoConfig Environment [ID 270519.1]) to make the preserve all your custom setup/configuration after running AutoConfig.
If there any custom script to delete only one node from the fnd_node so that we don't need to run autoconfig after that, then I really appreciate.No.
Thanks,
Hussein

Can't play the songs I bought from iStore

I can't play the songs I bought from iStore.
It complain about the autorization, but how much I try it seems like I can't get this computer to get authorized.
I login to iStore with my only login account, buy the song, and it gets downloaded. Then when I try to play the song, I asks me again about the authorization. I use the same accout login, and it reply that this computer is now authorized... again. But the songs stil can't be played.
If I click again on the song the same loop above repeats itself.
Frustrastion = I can't play the songs I have bought.
Anyone?
M.

I, also, have that authorization nonsense (I am the administrator, and only user of the computer). But, still, I cannot make any changes. You will have to report to someone at iTunes, if you try to play the downloaded songs from iTunes.
Which version, has it always been that way?
Also, did you change your username/password, if things were working fine, at one time?
I had your problem when I, originally, signed up with my AOL address. When I quite AOL, I got an Apple id, and I could not access my songs from AOL days for over three months. Eventually, someone at Apple helped me.

How can I get the No. of package and requesting system name in user exit?

Dear all,
Is there anybody knowing how to obtain the extracting package number and requesting system name in the user exit "EXIT_SAPLRSAP_002" ? here is detail on my questions as below:
For package number. If extracting 100,000 records of 0MATERIAL_TEXT , and the package size is 20,000, then there are 10 packages, when executing the user exit, how can I know which package I am extracting on?
For requesting name, when executing the user exit, how can I know the logical system name from which the extraction request is sent?
Thanks.
best regards
Patrick

Hi Mansi,
Thanks for your quick response.
The background of this requirement is, in the datasource 0material_Plant_Att, we added two fields in the extraction structure, one is variable price, another is previous year's variable price, which need to be obtained by searching data KEKO & CKIS in the user exit, these tables have the huge data volume, in each data package, the user exit needs to be executed once, so the heavy searching needs to be done once, consequently, the total running time of this request including several data packages is very long. In order to improve the performance, we design the following logic:
1. Create the temporary tables YCKIS & YKEKO in R/3.
2. Run BW request in BIW.
3. In R/3, If this is first data package of this request, delete all data in YCKIS & YKEKO, then search the data from CKIS & KEKO ( Average 20 million records), then insert these data into YCKIS & YKEKO ( Average 0.2 million records).
4. In R/3, if this is not first data package of this request, then search the data directly from YCKIS & YKEKO.
You can see in the above, in the step 4, the data searching performance can be improved significantly due to reading data from temporary table, this is why I need to know the No. of data package. In addition, apparently, it can not be done in BIW side since the performance issue is in the user exit rather than in BIW. Also it is very difficult to setup one counter to deliver this since we do not know when to reset the counter. For example,
- Assuming there are 3 data packages.
- 1st day, we schedule one request from BIW, in R/3,
   -> At 1st package, counter = 0+1=1
   -> At 2nd package, counter =1+1= 2.
   -> At 3rd package, counter = 2+1= 3, then reset counter = 0 for next request.
Question 1: How can we know the 3rd package is last one?
Question 2: If during the 2nd package, the extraction job is cancelled exceptionally, the counter value is 2 not 0, then for the next request, the data searching is not correct, right.
Hope the above is clear, and apology this email is too long.
Thanks.
best regards
Patrick

How can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)?

I am in openscript, using a settext commend - .setText("{{@today(MM/dd/yyyy), 10-02-2011}}}}"); is anyone know how can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)?
I went to Java Code tab and tried to use - new SimpleDataFormat("dd-MM-yyyy").format(new Date()); but not successful. Any help will be appreciated.
Katherine

Hi,
you can display the date format in dd-mm-yy by using the below Java code.
First import the bellow java classes.
import java.util.Date;
import java.text.SimpleDateFormat;
//and add bellow code in run() function
     //************ Display Date and Time *************
     Date date_format=new Date();
     SimpleDateFormat dateFormat = new SimpleDateFormat("dd-mm-yyyy");// HH:mm:ss");
     String Exec_Time = dateFormat.format(date_format);
//output statement
info("Today's Date: "+Exec_Time);
I can able to add the screenshot of this output here, so if you need any other information please write to me.
Regards,
MRSN

I'm trying to delete multiple pix in iPhoto that i stupidly made duplicates of without knowing, I've tried going into the applications folder and using image capture but i think I've missed a step , can anyone send the correct info / steps pls thanks

I'm trying to delete multiple pix in iPhoto that i stupidly made duplicates of without knowing, I've tried going into the applications folder and using image capture but i think I've missed a step , can anyone send the correct info / steps pls thanks

again image capture is not involved with deleting photos from iPhoto in any way ever
the paid version of iPhoto Library Manager is very good for finding duplicates as is Duplicate Annihilator
And I have no idea who told you this - or what it means - but re-read both of my opening statements
I was told I could delete multpiles thru image capture by transferring my iPhoto library etc
LN

Can anyone explain the function BAPI_PROJECT_GETINFO

Hi
Can anyone explain the function BAPI_PROJECT_GETINFO.
Can anyone explain the import and export parameters of this function module.
What is the logic.
I'm getting the output as 'No data record exists'.
This is immediately required.Please help me.
Thanking you
Chandrika.

hi
good
go trhough this
Short text
Read detailed information for work breakdown structures
Functionality
You use this method to read detailed information about project definitions and the WBS elements of certain projects from the system.
Notes
Enter the project definitions and/or the WBS elements, which you want detailed information about, in the parameter PROJECT_DEFINITION or I_WBS_ELEMENT_TABLE respectively.
If you only enter project definitions, the details of all the WBS that belong to the project definitions are read including the hierarchy. If you explicitly enter WBS elements, only these are read.
Messages are returned in Return parameters. For information about the return values and their meaning, see the parameter documentation.
Parameter
PROJECT_DEFINITION
WITH_ACTIVITIES
WITH_MILESTONES
WITH_SUBTREE
E_PROJECT_DEFINITION
RETURN
I_WBS_ELEMENT_TABLE
E_WBS_ELEMENT_TABLE
E_WBS_MILESTONE_TABLE
E_WBS_HIERARCHIE_TABLE
E_ACTIVITY_TABLE
E_MESSAGE_TABLE
thanks
mrutyun^

Can anyone explain the functionality of FM f4ut_parameter_get_values ?

Can anyone explain the functionality of FM f4ut_parameter_get_values ?
This is used in search help to retrive values from screen.This doesnt seem to work for me

hi,
check this
F4UT_PARAMETER_VALUE_GET
Short Text
Standard search help exit for determining contents of a srch help par.
FunctionalityBy calling this module in a search help exit, you can find out the current contents of a search help parameter . To do this, you must pass the name of the parameter in PARAMETER.
You must distinguish between the parameter contents that are used in the selection process of the input help process and the parameter contents that are determined by the selection process and the user selection.
Parameter contents that are used in the selection process are default values of search help parameters, values that are included in the input help process by attaching the search help to the screen from field contents of the screen or its module pool, and possibly complex restrictions made by the user in the dialog box for restricting value. Such parameter contents can also be included in the input help process by the search help exit itself.
The contents of the specified parameter used in the selection process are stored as complex restrictions in SELOPT_TAB after the call. If exactly one value is defined by these complex restrictions (for example if the restrictions have exactly one row and if SIGN = 'I' and OPTION = 'EQ' for this row), this unique value can be found in VALUE.
Parameter contents that are determined by selection process and user selection are the parameter contents that are shown in the dialog box for displaying the hit list or returned on the screen. They are managed by the F4 processor in RECORD_TAB.
This module enables you to transfer the information about the specified parameters from RECORD_TAB to RESULTS_TAB in edited form.
Pass the name of the field of RESULTS_TAB that should contain the contents of the parameter to the function module in parameter FIELDNAME. If the row type of RESULTS_TAB is elementary, pass the value '*' in FIELDNAME. The rest of RESULTS_TAB is not changed. The values are copied row by row. By removing rows at the end or by adding intiial rows you can make sure that RESULTS_TAB has exactly as many rows as RECOD_TAB.
Example
You can find an example of the second kind of use of the module in the search help exit SAPBC_GLOBAL_F4_SFLIGHT of search help SFLIGHT.
Both types of use can be found in the search help exit SAPBC_GLOBAL_F4_SFLIGHT_MIN_FR of search help SFLIGHT_MIN_FREE .
Notes
1. Parameters OFF_RESULT and LEN_RESULT should not be used any more since there are basic problems when using UNICODE. The contents of these parameter are still analyzed when parameter FILEDNAME is initial for compatibility reasons.
2. Only the dialog box for restricting values can normally produce complex restrictions for a parameter.
3. If VALUE has the value SPACE, this means that either there are complex restrictions for the parameter or the unique contents are SPACE. SELOPT_TAB must be evaluated in order to determine which of these is the case.
4. If the search help does not have any parameter with the given name, the exception PARAMETER_UNKNOWN is triggered.
5. Only parameter contents for the search help displayed in the hit list or the EXPORT parameters of the search help are first managed in RECORD_TAB. If the specified parameter does not satisfy one of these conditions and if parameter RESULTS_TAB is specified in the call, the exception PARAMETER_UNKNOWN can also be triggered. This is not true, however, if results were already entered for the parameter with function module F4UT_PARAMETER_RESULTS_PUT or if space was reserved for the parameter in RECORD_TAB with function module F4UT_PARAMETER_ALLOCATE. The parameter therefore should only be defined if information about the parameter contents are really required.
6. The header lines of the specified parameter are also transferred from RECORD_TAB to RESULTS_TAB.
7. The other parameters of this module must be defined as the parameters of the search help exit having the same name, but they are not changed by this module.
8. RESULTS_TAB should be a standard table.
9. The contents of the specified parameter in RECORD_TAB are copied to the specified field of table RESULTS_TAB with a MOVE of the correct type. If this is not possible, the target field is assigned the initial value.
10. If RESULTS_TAB has no field with the name specified by FIELDNAME, only the number of rows of RESULTS_TAB is adjusted to those of RECORD_TAB as described.
Parameters
PARAMETER
OFF_RESULT
LEN_RESULT
FIELDNAME
VALUE
SHLP
CALLCONTROL
SHLP_TAB
RECORD_TAB
SELOPT_TAB
RESULTS_TAB
Exceptions
PARAMETER_UNKNOWN
Function Group
SF4U
if helpful reward some points.
with regards,
Suresh Aluri.

Can anyone recomend the SD Configuration Package from ...

Similar Messages

Maybe you are looking for