Can anyone recommend a link/website to get a 8GB (2x4GB) 667Mhz DDR2 RAM Memory For MacBook Pro? Thanks!
Hi,
Can anyone recommend a link/website in the UK where I can get a decent 8GB (2x4GB) 667Mhz DDR2 RAM Memory For MacBook Pro?
It isn't currently available on the Apple Store and I cant seem to find a match searching on Google.
Really need to upgrade from my current 4GB. I have a 2008/2009 MacBook Pro 17"
Many thanks in advance!
SP
Here you go....
Amazon UK and pick the right one for you....
good luck....
Similar Messages
-
Hi All,
I pasted the error report info below that the most recent error brought up. My MacBook Pro will, on occasion, freeze up on me and usually turn the monitor completely black. This also happens occasionally when trying to boot up from a Standby mode, the system just never recovers and the monitor stays black. A couple times the monitor has stayed up displaying the last screen before the freeze and the system will just be frozen. The keyboard stays lit up however. I end up having to hard power down the laptop (by holding the power button for 4 seconds) and booting it back up.
I'm assuming it's a hardware issue, if the below info has any indicators as to what might actually be the problem it would be greatly appreciated if you could share that with me =)
Thanks!
Adam
Interval Since Last Panic Report: 177745 sec
Panics Since Last Report: 2
Anonymous UUID: C1B7CA34-113F-4559-8D9D-301FCAB6248D
Tue Sep 18 20:12:14 2012
panic(cpu 2 caller 0xffffff7f80918947): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff809f41b000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address
0xffffff807ba73b10 : 0xffffff8000220792
0xffffff807ba73b90 : 0xffffff7f80918947
0xffffff807ba73c20 : 0xffffff7f80a08aa4
0xffffff807ba73c70 : 0xffffff7f80a08b64
0xffffff807ba73cd0 : 0xffffff7f80cb5749
0xffffff807ba73e10 : 0xffffff7f80a27bed
0xffffff807ba73e40 : 0xffffff7f809222c2
0xffffff807ba73ef0 : 0xffffff800063c5b6
0xffffff807ba73f30 : 0xffffff800063b330
0xffffff807ba73f70 : 0xffffff800063b1d4
0xffffff807ba73fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000->0xffffff7f80b91fff
dependency: com.apple.iokit.IOPCIFamily(2.6.8)[F63D4ABE-42DA-33EF-BADD-3415B0CB0179]@0xffff ff7f80843000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f808a6000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f8086e000
com.apple.nvidia.nv50hal(7.1.8)[7596DB8C-AE9D-3C87-B11A-0ED8F940CAF8]@0xffffff7 f80b92000->0xffffff7f80eb3fff
dependency: com.apple.NVDAResman(7.1.8)[560E1257-BF5E-3B0B-95F0-15033A0D1B97]@0xffffff7f808 b8000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 8984322430299
last loaded kext at 60863374826: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f81efb000, size 28672)
last unloaded kext at 238694679502: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f81101000, size 65536)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.filesystems.ntfs 3.10.1
com.apple.driver.AGPM 100.12.42
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AppleIntelHDGraphics 7.1.8
com.apple.driver.AppleIntelHDGraphicsFB 7.1.8
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.GeForce 7.1.8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.1.2b2
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleSMC 3.1.3d8
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.1.8
com.apple.NVDAResman 7.1.8
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.0
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9SA02, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Nevermind, I found my answer... http://support.apple.com/kb/TS4088
-
Can Anyone Recommend Books About Mac and Tiger?
Hello,
I'm heading back to the homeland for a short visit in a week's time. I'd like to buy a book that can explain a few things about Tiger so I don't always have to visit the Apple Store and bother the Geniuses there.
Can anyone recommend any good books about Mac and Tiger? I know of "Mac For Dummies" but I've never been a big fan of that series. Cheers and thanks.Hi, jasperboy.
My "Learning About Mac OS X" FAQ has a number of resources that you will find helpful including books, online training, and more.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Hello everyone can anyone recommend a good place to get a replacement power supply for my mid 2009 15-inch macbook pro. It is starting to run really hot.
Did you try taking it (and the machine) into Apple?, they like to know what goes wrong with these things and sometimes gives a free replacement.
Magsafe problems Magsafe problems more -
AS it stands now, in order to use the calculator that comes with the Dashboard, you cannot read from a list of numbers in, lets say, word or excel. The dashboard is full screen and nothing can stand along side it. Is there a way to get the calculator from the dashboard to appear along with other programs? Can anyone recommend a calculator which will work as a stand alone app?
there is one, just search with spotlight "Calculator".
It works great!
Hope this helps. -
I am fairly new to Dreamweaver (cs6), having previously designed and maintained a few sites using Freeway. I purchased a template from TemplateMonster.com in the hope that this would simplify the creation of a new site. The template came without any instructions other than how to unzip the file. Their helpline really isn't helpful at all. Can anyone recommend an online tutorial on how to use a predesigned template? Lynda.com doesn't have one. Thanks!
I found this page :
http://www.templatemonster.com/dreamweaver-templates.php
Followed a link. Ended up here :
http://www.webdesign.org/tutorials/html-and-css/page-1.html
Did a search. Found this :
http://www.webdesign.org/search.html?keywords=dreamweaver&category=6
Then this :
http://www.webdesign.org/web-design-basics/templates-tuning/working-with-templat e-using-html-editor.1546.html -
Can anyone recommend an alternative software programme to Pages? I have an OS X 10.7.5 macbook pro, so I am unable to get it. I want a programme that I can create docs with pictures and text on, invitations, posters etc. Many thanks in advance…..
LibreOffice
-
Can anyone recommend any good books on leaning actionscript for flash?
Can anyone recommend any good books on leaning actionscript
for flash?
Intermediate level
I have been using flash for about 2 years more as a hobby
than anything else, some websites etc but now I realise I am going
to need to learn more actionscripting to do what I want, I have
come to terms with the simple stuff like goto – basic
variables – load mov – enough to programme up website
navigation.
I ideally want to learn more about the dynamic side of flash,
mostly for designing user interfaces and websites etc
I’m after a book that doesn’t get too heavy too
fast yet I’m a little past the more basic functions
Any thoughts?
CheersYou appear to be stuck on iOS 4.2.1. That means up really have a 2G iPod. A real 3G can go to 5.1.1
.To find compatible apps more app for 4.2.1 see:
Old Apps
VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
apps for ios 4.2.1: Apple Support Communities
Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
apps for 4.2.1 (also works for 3.1.3)
Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities -
Is it Possible in JSF? Can anyone recommend any java Technology for this?
I am doing Post Graduate Degree in Computer Science. This is my final semester and doing project work.
Any body having idea about my requirment, help and guide to me
My description and questions are as follows:
Current Approach:
PHP has been used to achieve the flexibility of creating custom images on-the-fly. Using this approach we were able to create a web-interface similar to the application client, where we could display links and get the exact look and feel of the application client.
Drawback:
This approach forces us to use two different technologies Java and PHP, since our system uses 'Java' accessing all the API's from PHP becomes a problem. while PHP provides a way to invoke any java method. It comes with a draw back, the method calls are little slow. This delay's are loading of web-page.
Requirment:
1. Creating custom images on various locations of the screen
2. The Exact look and feel of the application map should be achieved
3. Place elements and links correctly as in application-client reflect any changes
4. Generation events on the Links and Elements
5. Setting Backgroud images for different maps
Questions:
1. is it possible in JavaServer Faces (BETA)?
2. If it is possible is JavaServer Faces(BETA) How to create custom images and create interfaces among them?
3.Can anyone recommend any java Technology for doing this?
Anybody having idea, help and guide me for doing my projecthi,
I think you can use JSF
cheers
Trajano -
Can anyone recommend plug-ins for vocals?
Can anyone recommend plug-ins for vocals? I'm looking for an average "radio" sound. How can I get that?
Thanks
Anya
imac 20 inch 2 gig Ram Mac OS X (10.4.7) apogee + miroslav + looking for great midi controlerwell
Let's start again:
I use imac and ensemble by apogee as my audio
interface with and rode ntk microphone. that should
give me a preatty decent sound, but it comes out
kinda hollow and unnatural.
Hi AnyaS,
It seems like the room you are in might be adding it's "sound" and making your vocal sound like it is going through a tunnel,or "hollow" sounding.
Where are you doing your vocal recording? When you sing,do you hear your voice come back at you funny,like from a wall,or like you hear a faint "echo" or repeat in the room?
I could help you,but without actually listening what you are talking about it is almost impossible to know what problems you might be encountering,and also if you can point to a reference CD or artist that you are trying to sound like,I can't really give you concise advise as to what to do to get you there.Do you have any way of showing us some of the sound you are getting so we can listen to it? That can help a lot more than describing in words what you are not liking about your voacl sound.Again a lot of this is subjective use of language,so when you say "hollow sound" it could mean something else to me.
And as to the radio quality - I mean sound more round
and defined - someting that I could send to radio
and/or AR.
Well,I think you are putting the cart ahead of the horse here...try to get your sound "there" to where you like it first,before trying to be judged by "radio and A&R" people.
I am not sure how I can improve:
- better/additional hardware or
- better mastering/playing with software (I have IK
studio bundle - that I have only utilized so far as
sound source).
I am willing to spend additional $1000 if needed but
rather not.
I think you do not need to throw money at the problem...that never usually works.It is better to understand what sound you want to get first,and then try to get there.
I'll listen to what you have posted,but if you can have a link to a vocal without ANY processing,i.e. as you record it in your usual place,that would help more than a full mix of your music.I can tell easier what to do if your vocal is by itself.
you can listen to working draft here:
www.broadjam.com/aannaa
sorry I don't know how to create a link here.
Thank you for your help.
A
no problem,
noeqplease -
Can anyone recommend a lightbox software that is completely 508 compliant?
Can anyone recommend a truly 508 compliant lightbox software? By that I mean, you can access the lightbox with the keyboard only (no mouse action at all), i.e. you can tab through the lightbox gallery, access any links for more info within the pop up box, close the last box in the gallery, not have the screen reader read all the html in addition to captions, and make sure that the screenreader knows there is a lightbox there and announces it.
I bought Ajatix Lightbox v.3.1.6.0 plug in for Dreamweaver as it said it was 508 compliant. It makes beautiful lightboxes but it has some problems in that I cannot close the last lightbox in the gallery without tabbing through the rest of the site and landing back on the page link and reloading the page. Also accessing a link within the pop up is just as problematic. You have to tab through the rest of the site again until it lands on the link. Long winded. Perhaps this is as good as it gets? I've been back and forth with Ajatix who have tried to help but there doesn't seem to be a clear cut way to make these items easier.
Just thought I'd ask to see if anyone else had run into this?
Thanks in advance!
PamFocus is the main problem in Modal Windows. I think that unless you have the skills to code your own, it's probably best to avoid them.
accessibility - 508/ADA compliancy with lightboxes - Stack Overflow
How can one improve accessibility of modal windows in a browser? - User Experience Stack Exchange
Nancy O. -
Can anyone recommend me a Northbridge fan replacement?
I have a MSI K8N Neo4-F nForce4 and recently i have been experiencing random crashes and lock ups which i think are due to the northbridge fan failing (it was making horrible noises).
I tried to replace this with the Asaka heatsink/fan combination thing but it didn't fit under the graphics card as there is only about 1.5cm vertical space available. Can anyone recommend a replacement suitable for this motherboard? Preferably a cheap one. =)
Also -i don't know much about chipset- is it safe to run the computer without a northbridge fan installed assuming i don't do anything intensive like games or whatever?
Thanks in advance.I was sniffing around some other forums,(as you do), when I came across this post. It sounds intresting, and may be worth giving it a try.
Quote
"Repair your noisy cpu and system fans
This is a fix that will last for a long, long time.
Buy some graphite powder and some oil at an auto or hardware store. They come in different packages. For oil, the best is the pen-type as they are easy to handle and only give a small amount at a time. Just about any oil in a pen format will work fine. The graphite powder comes in small plastic tubes. But make sure you get graphite powder, not graphite oil, its too thin for this job! So you need graphite powder in a small tube and oil in a round "pen" that can be squeezed out and placed just where you need it. Also, when the oil is used up in the "pen" you can open it and add your own oil.
First, clean the fan blades off real well. If you have a heatsink with the fan then clean the heatsink off as well. You can even use a bit of your oil and some q-tips for cleaning if needed. Then, take the small circle, it usually has a name on it, but its in the middle of the fan. Peel one edge up carefully and put a very small amount of oil in where you lifted the label up. Now add some graphite powder in the same place where you put the oil, add as much or a bit more of the graphite powder than the oil. Clean off excess oil and graphite and push the label back where it was. You may need a very small amount of duct tape to hold the label in position and to prevent leakage. This is important if the fan is going to "sit up" as opposed to lying flat.
Now put the fan back where you want it and when it starts spinning it may be noisy for a few seconds until the graphite\oil works its way in. Then it will stop and it will stay stopped for many years and you may very well not need to buy a new fan after all!
I experimented a lot with this and this is the very best way to quiet all those fans and have them work well. I have always been a big fan of those removable ide hard drive trays that you can buy. But the fans are the pits, they get noisy real fast. So i had to find a way to fix them as they are very expensive and hard to replace. Now i don't have to. Combo of oil and graphite is the very best, by far. One caution, graphite stains worse than
oil, so be careful! I'm talking about staining your clothes and hands.
You can use this system with all CPU fans, video card fans, system fans, and even fans inside power supplies. But one word of caution, its easy to open a power supply and take out the fan, but do be careful as there are voltages there can can hurt you badly. If you don't know what you are doing then wear rubber gloves to get the fan out and to put the fan back in after the
repair!
Trust me, this will work. If the fan spins my method will work for years and I have even fixed fans that were stuck and wouldn't spin! This is better done with the fan on the table but in those cases where you cant or don't want
to take the fan out of the system, that's where the "pen" with the needle comes in again, but i still find a way to get some graphite in as well, graphite is what makes the oil last a long time! And graphite is also an oil, but you need both together for maximum effectiveness. Oil by itself will only last a few weeks or so and then evaporate, and the fan will get noisy again. Its the graphite powder that does the long term job. The oil really only helps to spread the graphite powder around really well so the graphite can do the job!
Hope you do as well as i have with this info!"
End Quote.
Edit - Additional Info
The type of northbridge fan used on some MSI boards, eg K8N Platinum & Diamond etc, require that you remove the fan from the board first (you will have to remove the motherboard to do this). This is because the top of the shroud is attached from the bottom by two tiny Phillips type screws. Once you have removed the shroud, very gently prise off the fan from the motor assembly. There is no need to try and remove the three other tiny screws that secure the fan motor in place to the bottom half of the shroud. Once removed, you will see that under the fan is a small plastic pin that holds the sleeve bearing in place.
Russell. -
I'm an avid Mac enthusiast who works in a creative field. However, I simply cannot afford a new Mac after my old one's internal hard drive failed. Can anyone recommend an affordable Mac option? I don't want to consider a non-Apple product.
Macs with a FireWire port will also boot happily from an External drive. You don't even need to open the MacBook.
Some users buy a drive they would like to have as a future Internal drive, and also buy an external enclosure. They get the External set up the way they want it, then swap with the Internal drive. -
Can anyone recommend a 1tb external hard disk?
I'm looking to purchase yet another external hard drive. I've already got a couple of LaCie disks (80gb & 300gb), the latter of which is now full of Apple Lossless files and converted ACC files for my iPod.
As I keep seeming to underestimate my space requirements, I'm looking to get a 1tb disk. Initially I was going to go with another LaCie drive but I've read quite a lot of bad things about them.
I need something that's going to be reliable and fast. Ideally with FW400/FW800 and usb2 interfaces. From what I've discovered so far it seems that the G-Tech and the OWC Mercury Elite drives seem to be the best.
Can anyone either recommend one to me or warn me about others?
Many thanks
Mark
PowerMacG4 DualSU Mac OS X (10.4.7) LaCie 80gb, LaCie d2 extreme (triple interface) 300gb, iPod Photo 60gb
PowerMacG4 DualSU Mac OS X (10.4.7) LaCie 80gb, LaCie d2 extreme (triple interface) 300gb, iPod Photo 60gbThanks for your input Chris.
I've been trawling through Google searches to find reviews of various drives. I guess that I'm looking for a pair of 500gb mirrored RAID drives with USB2, Firewire 400 & 800 connections.
I'm having trouble getting away from Other World Computing's Mercury Elite–AL Pro 800 RAID STRIPE FireWire 800/400.
http://eshop.macsales.com/CustomizedPages/Framework.cfm?page=mealp/mealpraid.html
But my trouble now is that I can't find a UK stockist so I think I'll have to start looking for other brands such as Maxtor.
Can anyone recommend a reliable manafacturer ??
PowerMacG4 DualSU Mac OS X (10.4.7) LaCie 80gb, LaCie d2 extreme (triple interface) 300gb, iPod Photo & Video 60gb -
Can anyone recommend a USB print server for both Mac & Windows?
After spending at least 20 hours trying to get my Macbook to print to a Windows XP shared printer, I am giving up and going the print server route. Unfortunately there seem to be a LOT of options and some are >$100. I want to be sure to find one that works for both Mac and Windows XP. Can anyone recommend a print server based on experience?
It can be hard-wired to the network (does not need to be wireless) and only needs one USB port. Also, it does not need to be "multi-function" compatible.
Thanks in advance!Unfortunately, Apple just started using the CUPS printing system ~4 years ago. With CUPS drivers, you can print to all the standard comm protocols, the way drivers work in Windows. But except for Brother's, NO non-postscript printer driver on OS X was written to use CUPS. Instead they are using Carbon, the OLD OS 9 legacy programming interface. In that, they get to specify exactly which protocol is supported - and that's nearly always ONLY USB.
So, we have to rely on third party CUPS drivers. See if Gutenprint supports yours:
http://www.linux-foundation.org/en/OpenPrinting/macosx
or else, you may need to use printfab:
www.printfab.net
About print servers - they nearly all support "standard" protocols, which OS X (with CUPS drivers) can print to.
Maybe you are looking for
-
How do I design software to test multiple devices simultaneously and indpendently?
I have a fixture for burning in up to 10 Controllers. I've written a VI to test one of the controllers but I'm not sure what approach to take to write the software for burning in up to 10 Controllers independently. The fixture's computer uses USB/GPI
-
Using the flash uninstaller/ problems/HELP PLEASE
Look I'm very ill and I can only concentrate so long so please don't think I'm a jerk. Nothing has gone right as of late, i'm worried that if i do it wrong flash will not work at all and I won't be able to fix it. I only can go on the computer certai
-
Problem in Receiver Mail Adapter
Hello, Scenario : Proxy --->> Email with attachement(Text) I am sending the multiple records from proxy into the Email adapter where filename is dynamic and Receipient is also dynamic. So i have used the following blog. to achieve this funcitonality.
-
23" Cinema Display Hinge is Broken
Does anyone know where I can order this part (it's the hinge/base device that attaches to the back of the monitor)? I've checked with both of my local authorized service shops and they want to charge me around $450 plus leave the monitor for several
-
Multi domains handling.
There has been many post regarding domain.sites splitting and how to handle multi-domain. First you need to split your domain.sites package, with courtesy of Mark: http://web.mac.com/mark8heaton/iWeb/DomainSeparation/SiteSeparation.html What about ha