Can anyone send me TCS XI running projects clients ?
can anyone send me TCS XI running projects clients?
please send ASAP..
HI Bipin and Prasad,
Please note TBIT40 materials are copyright protected by SAP AG. Distruibution of any such material is ILLEGAL.
If you need the training material, attend a training course in any SAP authorised training centre.
Regards,
Jai Shankar
Similar Messages
-
Can anyone write a actionscript for flash project
Hi All,
Can anyone write a Actionscript for my project.
I want to develop my project with the flash.
My project scenario is, I have total no of 60 (.swf) flash
movies and are about to take 4 to 5 minutes each, my aim is to
display 20 .swf files randomly at a time on the screen.
i.e., if we click on a button for the first time, it should
display a 20 flash movies on the screen and when we click for the
second time it should display other set of 20 flash movies it may
or may not repeat the previous ones. It means every person should
be displayed with a different set of flash movies, no two persons
can get the same set of movies. The movies should be randomly
selected.
Could you please direct me to meet my scenario, could you
please write a script for my flash.
Thank you for your precious time.Ndippy,
Folks on here are pretty good about helping out others who
are trying to learn actionscript, or have trouble with
understanding concepts. They are less likely to volunteer to do an
entire project for you. I'd suggest trying to do it yourself, and
asking specific questions about the process. Both of your posts are
way to general to allow anyone to give advice that would be
worthwhile. You have said that you have 60 .swfs in your first
post. However, in your second, you said they were 60 quicktime
files. There are very different processes for each option there.
Are you planning to display 20 at once, or let people scroll
through them? What size are your clips and what size are you
developing for?
Start small, like just trying to load one movie clip
randomly, and then work your way up. Experiment with changing the
positions, sizes, etc. When you run into trouble, ask a specific
question about what you are trying to do, and people will be happy
to help. -
Is it possible to create a schedule in Labview . Example: i want to off the lights at 7pm and want it on at 8am. If there is can anyone teach, its for a school project. Im using labview 2011...thx
Since this is a school project I recommend you do the work yourself. You will not learn asking others to do it for you. In addition, folks here will not do your homework for you. We are however more than wiling to answer specific questions for you. Post what you have done or tried and ask specific questions. I am confident you will get assistance.
And to answer your question, yes LabVIEW can be used to implement a scheduling program.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot -
Hi all can anyone send docs for Report Designer bi7.0
hi all,
Can anyone send me the documents for report designer bi 7.0.
regds
harihi hari,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/05154219fce12ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/05154219fce12ce10000000a1550b0/frameset.htm
hope this helps.. -
I'm trying to delete multiple pix in iPhoto that i stupidly made duplicates of without knowing, I've tried going into the applications folder and using image capture but i think I've missed a step , can anyone send the correct info / steps pls thanks
again image capture is not involved with deleting photos from iPhoto in any way ever
the paid version of iPhoto Library Manager is very good for finding duplicates as is Duplicate Annihilator
And I have no idea who told you this - or what it means - but re-read both of my opening statements
I was told I could delete multpiles thru image capture by transferring my iPhoto library etc
LN -
Can anyone send me docs about transportations in bw do and donts?
hi all,
Can anyone send me the documents about transportation procedure to be carried in bw do and donts.
to my email id [email protected]
thanxs in advance
regds
hariHi,
SAP Help
http://help.sap.com/saphelp_nw04/helpdata/en/94/d4943b00ce6622e10000000a114084/frameset.htm
Also check
TRANSPORTATION
Transportation
Thanks -
Can anyone send me business blueprint for abap ?
hi all,
Can anyone send me business blue print for abap. my email id is [email protected]
thanxs
harihi all,
Can anyone send me business blue print for abap. my email id is [email protected]
thanxs
hari -
Can anyone send/post me the code for RTP server which reads soundcard
hi all,
can anyone send me the code for RTP server which reads soundcard and RTP client to tranmit the sound.How much are you going to pay?
-
Hi all,
Can anyone send me RD20 and related to that BR30 with your past experience or some business scenarios please. I want to work them on my Prod Instance like real environment. If you fell "in secure" to publish them please remove your client name and company name as well. Or else you can send me to my personal mail ID [email protected]
Thanks in advance for your time and consideration .If the ASA has a current support contract, the TAC call center should be able to associate your CCO userid with it.
Meanwhile see your e-mail separately. -
Can anyone send me the CRM OD ER diagram.
Hi
Can anyone send me the crm od ER diagram to [email protected]? thanks a lotThere are some older documents that are out there on the web, but I don't believe you will be able to get an update version. I've asked every person from Oracle that I can get a hold of and got nothing recent. I actually asked one of the analytics presenter at OpenWorld at the beginning of October and the answer they gave me was "I know it would be helpful, but we can't distribute it".
Look at the JoinField() documentation in the Help File and you get a good idea for how the objects can be joined since it has the key relationships. Also, spending some time in the Advanced Custom Objects reporting area helps. -
CAn anyone send me documents related to key production support issues
CAn anyone send me documents related to key production support issues in SD and MM
thanks ®ards
amanHi Priya,
Please find the below link to have a very good stuff on Foreign Trade;
http://help.sap.com/bp_bblibrary/500/html/G09_ForgTrade_EN_IN.htm
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Can anyone send tutor for performance tuning?
can anyone send tutor for performance tuning?I like to chk my coding.
1. Unused/Dead code
Avoid leaving unused code in the program. Either comment out or delete the unused situation. Use program --> check --> extended program to check for the variables, which are not used statically.
2. Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called. For example:
This is better:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
Than this:
PERFORM sub1.
FORM sub1.
IF f1 NE 0.
ENDIF.
ENDFORM.
3. Usage of IF statements
When coding IF tests, nest the testing conditions so that the outer conditions are those which are most likely to fail. For logical expressions with AND , place the mostly likely false first and for the OR, place the mostly likely true first.
Example - nested IF's:
IF (least likely to be true).
IF (less likely to be true).
IF (most likely to be true).
ENDIF.
ENDIF.
ENDIF.
Example - IF...ELSEIF...ENDIF :
IF (most likely to be true).
ELSEIF (less likely to be true).
ELSEIF (least likely to be true).
ENDIF.
Example - AND:
IF (least likely to be true) AND
(most likely to be true).
ENDIF.
Example - OR:
IF (most likely to be true) OR
(least likely to be true).
4. CASE vs. nested Ifs
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
5. MOVE statements
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
MOVE BSEG TO *BSEG.
is better than
MOVE-CORRESPONDING BSEG TO *BSEG.
6. SELECT and SELECT SINGLE
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. If the entire key can be qualified, code a SELECT SINGLE not just a SELECT. If you are only interested in the first row or there is only one row to be returned, using SELECT SINGLE can increase performance by up to three times.
7. Small internal tables vs. complete internal tables
In general it is better to minimize the number of fields declared in an internal table. While it may be convenient to declare an internal table using the LIKE command, in most cases, programs will not use all fields in the SAP standard table.
For example:
Instead of this:
data: t_mara like mara occurs 0 with header line.
Use this:
data: begin of t_mara occurs 0,
matnr like mara-matnr,
end of t_mara.
8. Row-level processing and SELECT SINGLE
Similar to the processing of a SELECT-ENDSELECT loop, when calling multiple SELECT-SINGLE commands on a non-buffered table (check Data Dictionary -> Technical Info), you should do the following to improve performance:
o Use the SELECT into <itab> to buffer the necessary rows in an internal table, then
o sort the rows by the key fields, then
o use a READ TABLE WITH KEY ... BINARY SEARCH in place of the SELECT SINGLE command. Note that this only make sense when the table you are buffering is not too large (this decision must be made on a case by case basis).
9. READing single records of internal tables
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. This means that if the data is not sorted according to the key, the system must sequentially read the table. Therefore, you should:
o SORT the table
o use READ TABLE WITH KEY BINARY SEARCH for better performance.
10. SORTing internal tables
When SORTing internal tables, specify the fields to SORTed.
SORT ITAB BY FLD1 FLD2.
is more efficient than
SORT ITAB.
11. Number of entries in an internal table
To find out how many entries are in an internal table use DESCRIBE.
DESCRIBE TABLE ITAB LINES CNTLNS.
is more efficient than
LOOP AT ITAB.
CNTLNS = CNTLNS + 1.
ENDLOOP.
12. Performance diagnosis
To diagnose performance problems, it is recommended to use the SAP transaction SE30, ABAP/4 Runtime Analysis. The utility allows statistical analysis of transactions and programs.
13. Nested SELECTs versus table views
Since releASE 4.0, OPEN SQL allows both inner and outer table joins. A nested SELECT loop may be used to accomplish the same concept. However, the performance of nested SELECT loops is very poor in comparison to a join. Hence, to improve performance by a factor of 25x and reduce network load, you should either create a view in the data dictionary then use this view to select data, or code the select using a join.
14. If nested SELECTs must be used
As mentioned previously, performance can be dramatically improved by using views instead of nested SELECTs, however, if this is not possible, then the following example of using an internal table in a nested SELECT can also improve performance by a factor of 5x:
Use this:
form select_good.
data: t_vbak like vbak occurs 0 with header line.
data: t_vbap like vbap occurs 0 with header line.
select * from vbak into table t_vbak up to 200 rows.
select * from vbap
for all entries in t_vbak
where vbeln = t_vbak-vbeln.
endselect.
endform.
Instead of this:
form select_bad.
select * from vbak up to 200 rows.
select * from vbap where vbeln = vbak-vbeln.
endselect.
endselect.
endform.
Although using "SELECT...FOR ALL ENTRIES IN..." is generally very fast, you should be aware of the three pitfalls of using it:
Firstly, SAP automatically removes any duplicates from the rest of the retrieved records. Therefore, if you wish to ensure that no qualifying records are discarded, the field list of the inner SELECT must be designed to ensure the retrieved records will contain no duplicates (normally, this would mean including in the list of retrieved fields all of those fields that comprise that table's primary key).
Secondly, if you were able to code "SELECT ... FROM <database table> FOR ALL ENTRIES IN TABLE <itab>" and the internal table <itab> is empty, then all rows from <database table> will be retrieved.
Thirdly, if the internal table supplying the selection criteria (i.e. internal table <itab> in the example "...FOR ALL ENTRIES IN TABLE <itab> ") contains a large number of entries, performance degradation may occur.
15. SELECT * versus SELECTing individual fields
In general, use a SELECT statement specifying a list of fields instead of a SELECT * to reduce network traffic and improve performance. For tables with only a few fields the improvements may be minor, but many SAP tables contain more than 50 fields when the program needs only a few. In the latter case, the performace gains can be substantial. For example:
Use:
select vbeln auart vbtyp from table vbak
into (vbak-vbeln, vbak-auart, vbak-vbtyp)
where ...
Instead of using:
select * from vbak where ...
16. Avoid unnecessary statements
There are a few cases where one command is better than two. For example:
Use:
append <tab_wa> to <tab>.
Instead of:
<tab> = <tab_wa>.
append <tab> (modify <tab>).
And also, use:
if not <tab>[] is initial.
Instead of:
describe table <tab> lines <line_counter>.
if <line_counter> > 0.
17. Copying or appending internal tables
Use this:
<tab2>[] = <tab1>[]. (if <tab2> is empty)
Instead of this:
loop at <tab1>.
append <tab1> to <tab2>.
endloop.
However, if <tab2> is not empty and should not be overwritten, then use:
append lines of <tab1> [from index1] [to index2] to <tab2>.
P.S : Please reward if you find this useful.. -
Can anyone send sample Makefile
Can anyone send the sample makefile to compile multilple files under different folders. archive/create .so file and link in main folder.
Here is an example. This source tree contains 2 libraries (lib1 and lib2) and "cmd"
directory under "src" directory.
volga% ls -lR
total 4
-rw-rw-rw- 1 nikm staff 844 Jan 2 18:44 Makefile
drwxrwxrwx 5 nikm staff 512 Jan 2 17:52 src
./src:
total 6
drwxrwxrwx 2 nikm staff 512 Jan 2 17:57 cmd
drwxrwxrwx 2 nikm staff 512 Jan 2 18:45 lib1
drwxrwxrwx 2 nikm staff 512 Jan 2 18:45 lib2
./src/cmd:
total 2
-rw-rw-rw- 1 nikm staff 232 Jan 2 17:57 cmd1.c
./src/lib1:
total 4
-rw-rw-rw- 1 nikm staff 33 Jan 2 17:53 lib1f1.c
-rw-rw-rw- 1 nikm staff 33 Jan 2 17:54 lib1f2.c
./src/lib2:
total 4
-rw-rw-rw- 1 nikm staff 33 Jan 2 17:55 lib2f1.c
-rw-rw-rw- 1 nikm staff 33 Jan 2 17:54 lib2f2.cThere is only one makefile, which builds both shared libraries, and then links the binary.
volga% cat Makefile
# Makefile
# Builds lib1.a, lib2.a libraries, and cmd1 binary
all: cmd1
# Libraries
LIBS=$(LIB1) $(LIB2)
LIB1=lib1.so
LIB2=lib2.so
# C Flags
CFLAGS=-KPIC
# Target to build binary cmd1
cmd1: src/cmd/cmd1.c $(LIBS)
$(LINK.c) -o $@ src/cmd/cmd1.c $(LIBS)
# Targets to build library lib1.so
LIB1SRCDIR=src/lib1
LIB1OBJ=$(LIB1SRCDIR)/lib1f1.o $(LIB1SRCDIR)/lib1f2.o
$(LIB1SRCDIR)/%.o: $(LIB1SRCDIR)/%.c
$(COMPILE.c) -o $@ $<
$(LIB1): $(LIB1OBJ)
$(LINK.c) -o $@ -G $(LIB1OBJ)
# Targets to build library lib2.so
LIB2SRCDIR=src/lib2
LIB2OBJ=$(LIB2SRCDIR)/lib2f1.o $(LIB2SRCDIR)/lib2f2.o
$(LIB2SRCDIR)/%.o: $(LIB2SRCDIR)/%.c
$(COMPILE.c) -o $@ $<
$(LIB2): $(LIB2OBJ)
$(LINK.c) -o $@ -G $(LIB2OBJ)
# Targets clean and clobber
clean:
rm -f $(LIB1OBJ) $(LIB2OBJ)
clobber: clean
rm -f cmd1 $(LIB1) $(LIB2)
.KEEP_STATE:Target ".KEEP_STATE:" is used to rebuild the binary if any source file is updated.
Here is an output of "make" command:
volga% make
cc -KPIC -c -o src/lib1/lib1f1.o src/lib1/lib1f1.c
cc -KPIC -c -o src/lib1/lib1f2.o src/lib1/lib1f2.c
cc -KPIC -o lib1.so -G src/lib1/lib1f1.o src/lib1/lib1f2.o
cc -KPIC -c -o src/lib2/lib2f1.o src/lib2/lib2f1.c
cc -KPIC -c -o src/lib2/lib2f2.o src/lib2/lib2f2.c
cc -KPIC -o lib2.so -G src/lib2/lib2f1.o src/lib2/lib2f2.o
cc -KPIC -o cmd1 src/cmd/cmd1.c lib1.so lib2.soThis makefile allows to build independent targets in parallel, so we can use "dmake" in
parallel mode:
volga% dmake -m parallel -j 4
volga --> 1 job
cc -KPIC -c -o src/lib1/lib1f1.o src/lib1/lib1f1.c
volga --> 2 jobs
cc -KPIC -c -o src/lib1/lib1f2.o src/lib1/lib1f2.c
volga --> 3 jobs
cc -KPIC -c -o src/lib2/lib2f1.o src/lib2/lib2f1.c
volga --> 4 jobs
cc -KPIC -c -o src/lib2/lib2f2.o src/lib2/lib2f2.c
volga --> 3 jobs
cc -KPIC -o lib1.so -G src/lib1/lib1f1.o src/lib1/lib1f2.o
volga --> 2 jobs
cc -KPIC -o lib2.so -G src/lib2/lib2f1.o src/lib2/lib2f2.o
volga --> 1 job
cc -KPIC -o cmd1 src/cmd/cmd1.c lib1.so lib2.soThis makefile works for GNU make as well:
volga% gmake -j 4
cc -KPIC -c -o src/lib1/lib1f1.o src/lib1/lib1f1.c
cc -KPIC -c -o src/lib1/lib1f2.o src/lib1/lib1f2.c
cc -KPIC -c -o src/lib2/lib2f1.o src/lib2/lib2f1.c
cc -KPIC -c -o src/lib2/lib2f2.o src/lib2/lib2f2.c
cc -KPIC -o lib1.so -G src/lib1/lib1f1.o src/lib1/lib1f2.o
cc -KPIC -o lib2.so -G src/lib2/lib2f1.o src/lib2/lib2f2.o
cc -KPIC -o cmd1 src/cmd/cmd1.c lib1.so lib2.soThanks,
Nik -
Can anyone send some docs about 0infoprovider?
hi all,
I am trying to create a new multiprovider where the infoproviders are from 4 ods. i want to restict an ods using infoprovider?
So can anyone send me some docs nor links. to my email id [email protected]
regds
hariHi Hari,
Check out these threads,
what is 0infoprovider
Restriction in a multiprovider based on Infoprovider
Re: Filtering Datatarget in Multiprovider level in BEx
Regards,
Mani -
Can anyone send me TBIT40files.zip?
hai,
I am working with TBIT40 Exercise3. For that i need TBIT40files.zip files for PurchaseOrderCombined.xsd,transforms_zip.zip and for testing scenario.
can anyone send me to [email protected]
Thanks.
prasadHI Bipin and Prasad,
Please note TBIT40 materials are copyright protected by SAP AG. Distruibution of any such material is ILLEGAL.
If you need the training material, attend a training course in any SAP authorised training centre.
Regards,
Jai Shankar
Maybe you are looking for
-
Capture Change in Sales Order Status
Dear All, I have an issue in which i need to capture all the sales order in which change has taken place in a given day. I have checked CDHDR & CDPOS but they arent helpful as they are not updated when there is change in status of sales order. Could
-
Storing video files over ftp on wless LAN
Hello, I want to be able to store my files on a hidden NAS in my house, that is accessible via an exiting Wireless Access Point. Any ideas on any decent-priced NAS's out there, that will allow me to use FTP Filezilla to store video jpgs from about 8
-
I backed-up my iphone 3GS to my computer and now I can't find any of my music. I doesn't seem to be anywhere in itunes. Can anyone help me?
-
Bear in mind I'm brand new. With that said, I purchased a new system recently and in the process of setting it all up i was prompted to load the device driver for my w1907 monitor. Upon doing so I got the message that the software was found but a pro
-
I have new iMac with Lion installed; can I get a free upgrade for my MacBook Pro?
Hello I recently bought a 27" iMac with Lion installed. Should I be able to download the upgrade for my MacBook Pro without paying. If so what should I do. If I go to the App Store I'll end up paying £20.99 Any help gratefully received margaret