Can anyone send some docs about 0infoprovider?

hi all,
I am trying to create a new multiprovider where the infoproviders are from 4 ods. i want to restict an ods using infoprovider?
So can anyone send me some docs nor links. to my email id [email protected]
regds
hari

Hi Hari,
Check out these threads,
what is 0infoprovider
Restriction in a multiprovider based on Infoprovider
Re: Filtering Datatarget in Multiprovider level in BEx
Regards,
Mani

Similar Messages

Can anyone send me docs about transportations in bw do and donts?

hi all,
Can anyone send me the documents about transportation procedure to be carried in bw do and donts.
to my email id [email protected]
thanxs in advance
regds
hari

Hi,
SAP Help
http://help.sap.com/saphelp_nw04/helpdata/en/94/d4943b00ce6622e10000000a114084/frameset.htm
Also check
TRANSPORTATION
Transportation
Thanks

Can anyone send some specs for practice

Hi friends,
Could anyone kindly send me some sample specs for report writing that i can practice with.
my mail id is [email protected]...
Thnks.

Hi
Do the following 2 reports
1. display the customer wise sales orders totals for a given period and for a given materials and for a given sales area .
Take KUNNR, VBELN ,MATNR, vkorg,vtweg,spart and DATE as selection screen fields and fetch the data from KNA1,VBAK and VBAP and display the Customer, name,order no, item, order date, material, description, qty, unit, net value and currency..
2. Display the vendor wise Purchase order totals for a given date and for a given materials and for a given pur group
use the fields lifnr, matnr, date,EKORG as selection screen and display the data from LFA1,EKKO and EKPO with the following fields
vendor, name,po no, item,po date, pur group, material, description, qty, unit, value, currency etc
<b>Reward points for useful Answers</b>
Regards
Anji

Can anyone send me some docs about dimension analysis?

hi all
Can anyone send me some docs about dimension analysis. What factors should be considered before dimension are created and stuff like that.
to my email id [email protected]
regds
hari

hi all
Can anyone send me some docs about dimension analysis. What factors should be considered before dimension are created and stuff like that.
to my email id [email protected].
regds
hari

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

Hi all can anyone send docs for Report Designer bi7.0

hi all,
Can anyone send me the documents for report designer bi 7.0.
regds
hari

hi hari,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/05154219fce12ce10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/05154219fce12ce10000000a1550b0/frameset.htm
hope this helps..

Can anyone let me know about solution manager with respect to BI

Hi all,
I have been working on bi for more than 3 years. I am new to solution manager. Can anyone pls guide me about the activities that a sap bi consultant should know.
Can anyone pls send the docs, pdf, nor url pertaining to solution manager with BI.
Thanks
Pooja

chhk this
[http://www.solutionmanagerexpert.com/article.cfm?id=3509|http://www.solutionmanagerexpert.com/article.cfm?id=3509]
[http://help.sap.com/saphelp_tm70/helpdata/en/43/f3f8f92f322ae6e10000000a422035/content.htm|http://help.sap.com/saphelp_tm70/helpdata/en/43/f3f8f92f322ae6e10000000a422035/content.htm]

Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks

Woke up to my iPhone 4 being completely blank. I've tried restarting and resetting it as well as charging it and plugging into my computer. Can anyone shed some light as to what may be wrong or how to fix it? Thanks

Hello there, Kyle.Kuz.
The following Knowledge Base article that provides some helpful pointers to help resolve your issue is:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Can anyone send me

Hi all,
Can anyone send me RD20 and related to that BR30 with your past experience or some business scenarios please. I want to work them on my Prod Instance like real environment. If you fell "in secure" to publish them please remove your client name and company name as well. Or else you can send me to my personal mail ID [email protected]
Thanks in advance for your time and consideration .

If the ASA has a current support contract, the TAC call center should be able to associate your CCO userid with it.
Meanwhile see your e-mail separately.

Can anyone send me the CRM OD ER diagram.

Hi
Can anyone send me the crm od ER diagram to [email protected]? thanks a lot

There are some older documents that are out there on the web, but I don't believe you will be able to get an update version. I've asked every person from Oracle that I can get a hold of and got nothing recent. I actually asked one of the analytics presenter at OpenWorld at the beginning of October and the answer they gave me was "I know it would be helpful, but we can't distribute it".
Look at the JoinField() documentation in the Help File and you get a good idea for how the objects can be joined since it has the key relationships. Also, spending some time in the Advanced Custom Objects reporting area helps.

Can anyone send tutor for performance tuning?

can anyone send tutor for performance tuning?I like to chk my coding.

1.      Unused/Dead code
Avoid leaving unused code in the program. Either comment out or delete the unused situation. Use program --> check --> extended program to check for the variables, which are not used statically.
2.      Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called. For example:
This is better:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
Than this:
PERFORM sub1.
FORM sub1.
IF f1 NE 0.
ENDIF.
ENDFORM.
3.      Usage of IF statements
When coding IF tests, nest the testing conditions so that the outer conditions are those which are most likely to fail. For logical expressions with AND , place the mostly likely false first and for the OR, place the mostly likely true first.
Example - nested IF's:
IF (least likely to be true).
    IF (less likely to be true).
     IF (most likely to be true).
     ENDIF.
    ENDIF.
   ENDIF.
Example - IF...ELSEIF...ENDIF :
IF (most likely to be true).
ELSEIF (less likely to be true).
ELSEIF (least likely to be true).
ENDIF.
Example - AND:
   IF (least likely to be true) AND
      (most likely to be true).
   ENDIF.
Example - OR:
        IF (most likely to be true) OR
      (least likely to be true).
4.      CASE vs. nested Ifs
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
5.      MOVE statements
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
MOVE BSEG TO *BSEG.
is better than
MOVE-CORRESPONDING BSEG TO *BSEG.
6.      SELECT and SELECT SINGLE
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. If the entire key can be qualified, code a SELECT SINGLE not just a SELECT.   If you are only interested in the first row or there is only one row to be returned, using SELECT SINGLE can increase performance by up to three times.
7.      Small internal tables vs. complete internal tables
In general it is better to minimize the number of fields declared in an internal table. While it may be convenient to declare an internal table using the LIKE command, in most cases, programs will not use all fields in the SAP standard table.
For example:
Instead of this:
data: t_mara like mara occurs 0 with header line.
Use this:
data: begin of t_mara occurs 0,
        matnr like mara-matnr,
        end of t_mara.
8.      Row-level processing and SELECT SINGLE
Similar to the processing of a SELECT-ENDSELECT loop, when calling multiple SELECT-SINGLE commands on a non-buffered table (check Data Dictionary -> Technical Info), you should do the following to improve performance:
o       Use the SELECT into <itab> to buffer the necessary rows in an internal table, then
o       sort the rows by the key fields, then
o       use a READ TABLE WITH KEY ... BINARY SEARCH in place of the SELECT SINGLE command. Note that this only make sense when the table you are buffering is not too large (this decision must be made on a case by case basis).
9.      READing single records of internal tables
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. This means that if the data is not sorted according to the key, the system must sequentially read the table.   Therefore, you should:
o       SORT the table
o       use READ TABLE WITH KEY BINARY SEARCH for better performance.
10. SORTing internal tables
When SORTing internal tables, specify the fields to SORTed.
SORT ITAB BY FLD1 FLD2.
is more efficient than
SORT ITAB.
11. Number of entries in an internal table
To find out how many entries are in an internal table use DESCRIBE.
DESCRIBE TABLE ITAB LINES CNTLNS.
is more efficient than
LOOP AT ITAB.
CNTLNS = CNTLNS + 1.
ENDLOOP.
12. Performance diagnosis
To diagnose performance problems, it is recommended to use the SAP transaction SE30, ABAP/4 Runtime Analysis. The utility allows statistical analysis of transactions and programs.
13. Nested SELECTs versus table views
Since releASE 4.0, OPEN SQL allows both inner and outer table joins. A nested SELECT loop may be used to accomplish the same concept. However, the performance of nested SELECT loops is very poor in comparison to a join. Hence, to improve performance by a factor of 25x and reduce network load, you should either create a view in the data dictionary then use this view to select data, or code the select using a join.
14. If nested SELECTs must be used
As mentioned previously, performance can be dramatically improved by using views instead of nested SELECTs, however, if this is not possible, then the following example of using an internal table in a nested SELECT can also improve performance by a factor of 5x:
Use this:
form select_good.
data: t_vbak like vbak occurs 0 with header line.
data: t_vbap like vbap occurs 0 with header line.
select * from vbak into table t_vbak up to 200 rows.
select * from vbap
          for all entries in t_vbak
          where vbeln = t_vbak-vbeln.
endselect.
endform.
Instead of this:
form select_bad.
select * from vbak up to 200 rows.
select * from vbap where vbeln = vbak-vbeln.
endselect.
endselect.
endform.
Although using "SELECT...FOR ALL ENTRIES IN..." is generally very fast, you should be aware of the three pitfalls of using it:
Firstly, SAP automatically removes any duplicates from the rest of the retrieved records. Therefore, if you wish to ensure that no qualifying records are discarded, the field list of the inner SELECT must be designed to ensure the retrieved records will contain no duplicates (normally, this would mean including in the list of retrieved fields all of those fields that comprise that table's primary key).
Secondly, if you were able to code "SELECT ... FROM <database table> FOR ALL ENTRIES IN TABLE <itab>" and the internal table <itab> is empty, then all rows from <database table> will be retrieved.
Thirdly, if the internal table supplying the selection criteria (i.e. internal table <itab> in the example "...FOR ALL ENTRIES IN TABLE <itab> ") contains a large number of entries, performance degradation may occur.
15. SELECT * versus SELECTing individual fields
In general, use a SELECT statement specifying a list of fields instead of a SELECT * to reduce network traffic and improve performance. For tables with only a few fields the improvements may be minor, but many SAP tables contain more than 50 fields when the program needs only a few. In the latter case, the performace gains can be substantial. For example:
Use:
select vbeln auart vbtyp from table vbak
into (vbak-vbeln, vbak-auart, vbak-vbtyp)
where ...
Instead of using:
select * from vbak where ...
16. Avoid unnecessary statements
There are a few cases where one command is better than two. For example:
Use:
append <tab_wa> to <tab>.
Instead of:
<tab> = <tab_wa>.
append <tab> (modify <tab>).
And also, use:
if not <tab>[] is initial.
Instead of:
describe table <tab> lines <line_counter>.
if <line_counter> > 0.
17. Copying or appending internal tables
Use this:
<tab2>[] = <tab1>[]. (if <tab2> is empty)
Instead of this:
loop at <tab1>.
append <tab1> to <tab2>.
endloop.
However, if <tab2> is not empty and should not be overwritten, then use:
append lines of <tab1> [from index1] [to index2] to <tab2>.
P.S : Please reward if you find this useful..

Can anyone send me the link related COPA Cubes and Reports

I guess if you want links on help.sap.com you can search and find the same too!!
Hi,
can anyone send me the COPA Standard cubes and Reprots list and
can anyone send the link where we get the above objects ...
Regards,
Suman
Edited by: Arun Varadarajan on Feb 11, 2009 12:58 PM

Hi.......
Go to RSA1 >> Business content >> Click on Object Types >> There click on Infocube >> Expand the node >> Click on Select Objects.............there search for the Term COPA...........u will get all the standard COPA infocubes.......
Check this.......
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Regards,
Debjani....

CAN ANYONE SEND ME PROGRAMS ON BSP APPLICATION

HI,
I AM NEW TO BSP APPLICATION, SO CAN ANYONE SEND ME SOME GOOD & INTERACTIVE PROGRAMS ON BSP APPLICATION.
THANKS IN ADVANCED.

Hi Santosh,
Please follow these links ...
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm">BSP Tutorials</a>
Follow all the tutorials to get a good hand on BSP...!
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm">First Tutorial</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm">Second Tutorial</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm">Second Tutorial with HTMLB</a>
and so on...!
<i>Do reward each useful answer..!</i>
Thanks,
Tatvagna.

Can anyone send me the Responsibilities of a SAP-BW Consultant ?

hi SAP-BW Gurus,
Can anyone send me the Responsibilities of a SAP-BW Consultant ?
I am sending this question because i am fresher and i don't know the responsibilities of a BW Consultant ?
Pls send me the Ans to My EmailId : [email protected]
thanks inadvance,
Regards,
Raju

hi,
Check below link
http://sap-img.com/business/difference-between-bw-technical-and-functional.htm
If you work on a specific Application area in BW like say FI, MM, PP , etc. you are a BW functional. They rather look for the functionality and not for the underlying code.
But if you are working across application areas then you are BW technical. They are the ones who do all the development like creating BW objects and activating them, developing BW objects according to the design specs(FS and TS),data modeling skills,ABAP coding skills for routines and exits.Sort of skills required by person working in development phase of work
Generally BW Technical people are expected to have some basic functional knowledge. But if they really have very good functional knowledge in atleast one application area then they are generally called "Techno-functional Consultants".
Their work includes to look into Functioanlity and also desing and development of the BW objects.
Hope it helps...

Please can anyone send me a snapshot of lsmw using bapi

please can anyone send me a snapshot of lsmw using bapi
pointz wll b rewarded to the person who send a snapshot of the above query in my mail
[email protected]

Hi,
Please check these links for step by step including snapshot.
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
Regards,
Ferry Lianto

Can anyone send some docs about 0infoprovider?

Similar Messages

Maybe you are looking for