Can anyone suggest why bridge cc stopped creating previews?
I was reviewing around 5,000 photos over the weekend, and everything went fine right up until late on Sunday when bridge just stopped creating previews. It's not the end of the world, as it creates it pretty fast when I click on the photo, but it is annoying.
You can see on the screenshot below, that it's creating 100% previews for about half of this folder, and then it's created none after this. Not in this folder and not in any others either. It also won't update any previews after I've done work in Camera Raw.
I've tried purging the cache, looking for updates, and restarting the machine - none of which has helped.
Anyone else have any suggestions?
Machine: Windows 7, Dual Xeon, 64GB RAM, 160GB of space left on scratch/cache disk array - exibiting no other faults.
Some have the black border around to indicate that no preview has been created, and even when I manually click on them a preview is created and discarded. The thumbnails are not updated to reflect any editing changes either - as the nef and jpgs should actualy be the same.
I do occasionally get a message that there's no space on that drive to export thumbnails, but there's 1.6 TB free on there at the moment!
Similar Messages
-
have tried to copy ratings over to a new computer using the export playlist function and this fails... can anyone suggest why?
Because ratings don't travel with the files or the playlist.
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2 -
Iphoto keeps crashing...can anyone suggest why?
I have been successfully downloading photographs from my Nikon D80 to iphoto5 on my mac mini for months. (There are only around 1300 photos saved on at any one time...and I'm only trying to download 30 from the camera) Suddenly, I find that the photos start to download perfectly normally, and then iphoto crashes! I've retried, rebooted...all that good stuff, but no difference! I tried downloading them onto a different mac and they downloaded perfectly...so it's nothing to do with the camera.
Does anyone have any suggestions?
Mac mini Mac OS X (10.4.8)Neeca,
Try not to worry about the folders you see inside the iPhoto library folder when you look at it from the Finder. It can be disconcerting, but iPhoto has filed your photos into the structure so that it can access them when you use iPhoto. The concept of iPhoto is that you view and access your photos from within iPhoto, and let it take care of the file management.
If you have located your original iPhoto Library folder (without the _1 in the name) then this is the one you want iPhoto to open. Hold down the Option key while launching iPhoto. When you are prompted to create or choose a library, click "Choose Library." Use the next window to navigate to the iPhoto Library folder (probably Home/ Pictures/ iPhoto Library). With the iPhoto Library folder selected, click the Open button.
Does your original library then open in the same condition it was in before you created the new one? Can you see your photos in the viewing window? If so, good - you are back to where you started. Close iPhoto. Hold Option and Command while launching iPhoto. Select the first 3 options in the dialog box and let iPhoto rebuild its database. This should help with the crashing.
If your library does not look the way it did before, then you have made changes to the folders or files from the Finder. You'll have to undo those changes. The random photos and numbered folders all over the place are the way iPhoto catalogs your library. Changing them from the Finder breaks the links between your photos and the database, so that iPhoto has lost track of your photos. If you can't put things back as they were, you will have to create and populate a new library. You will lose all of your Albums, keywords, ratings, and other organizational efforts.
Post back with results, and we'll help you get your library up and running. -
Can anyone suggest why Dev Studio can't see the server engine
We have NW2004s/SP08 installed. The server J2EE engine runs fine and one can log into the server and succssfully deploy jar's directly to it.
We also have Dev Studio installed on a desktop and it works fine. We have our J2EE preferences set using the actual IP address of the server J2EE engine and port number 3061. (We can ping this IP address successfully.)
When we try to do a Deploy/Run from Dev Studio and monitor this attempt on the server side, we can see Dev Studio trying to connect.
But it doesn't connect. In Dev Studio, we just get a message saying "sdmhost empty or unknown".
What's missing in our config? It was set up for us by externals no longer here. Since we can successfully ping the IP of the server from the PC, and since we can see DevStudio trying to connect, it can't be a network connectivity problem.
Thanks for any suggestions as to where to look/what to do.Pascal -
I am indebted to you for your kindness in taking the time to answer such a trivial question.
I assume that because the client is now asking me for the SDM password, your solution is correct. (It didn't ask me for a password before - I just got the error message.)
So I've tagged your reply for 10, even though I don't know the password so can't completely confirm yet.
I'll cycle back and confirm once I have the password.
Thanks very much again.
Dave -
Since upgrading to Windows 8, Firefox locks up when I try to use it, can anyone suggest why please?
We had to download Firefox once we had installed Windows 8. Although we now have a Firefox tile on the new Windows desktop, to enable access to Firefox, whenever we click on it to go to Firefox, we get the option to select Firefox as our default browser. Whether we say Yes or No, the screen then locks up and we have to use Control, Alt and Delete to close it.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
HT5622 I charged my Ipad mini overnight and now it does not turn on at all. Can anyone suggest why?
I charged my Ipad Mini overnight and it does not turn on at all today. It is only 7 months old. I received it as a gift, so I have no receipt. Any suggestions as to what may be wrong with it?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Lately my magic mouse has been losing its connection quite randomly. It usually reconnects soon after. I bought a cheap USB mouse to keep me going during these unexpected down-times. The batteries are fresh and the switch is on. I've uninstalled and re-installed the mouse in Bluetooth, but the problem recurs.
Try a PRAM reset. That usually helps bluetooth problems.
http://support.apple.com/kb/ht1379
There are some other causes relating to rechargable batteries, see this thread:
https://discussions.apple.com/thread/3058776?tstart=0
Regards,
Captfred -
Can anyone suggest why? my software up to date..thanks
Hi there there is no icloud icon in my apple preferences. my icloud storage has run out and I need to upgrade or delete something! any help appreciated
iCloud will only show up in your prefences after you up date you system to OSX 10.7 or newer. However, you may manage your iCloud from your iPod (or any other iOS device) via Settings, iCloud settings.
I hope this works. -
Can anyone explain why all of my Spry Assets on a live website have suddenly stopped working?
Can anyone explain why all of my Spry Assets on a live website have stopped responding? I have checked that the Spry CSS and JS files are in place. Then checked the files on Dreamweavers live view and they are not working there either. It was fine a few weeks ago, it is almost as if the web browsers have stopped rending Spry, for example, the links for the collapsible panels are not even being recognised as links.
I am using 'old' spry assets on Dreamweaver CS4 (if that makes a difference). The Spry Assets used are Tabbed Panels and Collapsible Panels.
Thanks for your help.Something has been going on, when I look at the bottom of your document (as pasted below), this is normally all at the top after the links to external style sheets.
<script src="js/jquery-1.10.2.min.js"></script>
<script src="js/lightbox-2.6.min.js"></script>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<script type="text/javascript" charset="utf-8" src="Menu_Photography_edgePreload.js"></script>
<script src="SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
<script type="text/javascript">
<!--
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
//-->
</script> -
I have a mac OS X 10.4.11 and have created a website in iweb08 ... in order to get it to my host site for it to go live I am having difficulty finding a ftp client to get me there. Can anyone suggest what I should do?
Check if any of the below have an older version by contacting the author for your 10.4.11:
http://www.rbrowser.com/
http://rsug.itd.umich.edu/software/fugu
http://cyberduck.io/
http://panic.com/transmit/
http://fetchsoftworks.com/
Or use Applications -> Utilities -> Terminal to do command line FTP:
http://www.dummies.com/how-to/content/how-to-use-ftp-from-terminal-to-transfer-m ac-files.navId-400509.html
Upgrading to 10.6.8 should still give you mostly the same compatibility as 10.4.11. Upgrading to 10.7 and above won't. -
I would really find a draw application "iDraw" maybe, very useful to create diagrams and overlays on photographs. Is Apple likely to add a module to ilife or iWorks? Failing that, can anyone suggest a freeware, or shareware app? I recall an app some years ago,Studio8 ? It would be really useful for work and home use. regards,alan b
Describe exactlhy what you want to do with photos? There are some apps, like Pages, that can add text and graphics over photos. Describe what you are wanting to do or post an example from somewhere else and we may be able to suggest an app.
OT -
Hi.
I run my own company and would like to create my own simple text based logo using a font I've downloaded. Can anyone suggest an app or programme that will be simple enough for a dunce like me to create vectored graphics and reliable enough to create something professional and usable, please?
Thanks.I believe if you copy the font into the font folder, any application should be able to use that font.
-
Hi. My Face Time continuisely shuts itself down after about a minute of use. Can anyone suggest what might be causing this and how I can sort it out. This only happens on my MacBook Pro and not on any of my other devices.
Creating a new profile and deleting the old one seemed to fix the problem. Why the problem occurred in the first place, is beyond me. But after creating the new profile, restoring all my bookmarks, and reinstalling Flashgot, everything seems to be behaving wonderfully. For anyone else having similar issues, I recommend creating the new profile. It's easy to do, as long as you save your old one, so you can copy all the necessary files to restore your preferences and bookmarks.
-
My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .
Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.
Maybe you are looking for
-
Hi all I have a problem when i print my alv grid report it first prints the title page then the revelent pages can i remove that title page. thanks
-
Hard Drive Replacement - Installing Recovery Discs
Hard drive crashed. Bought a new seagate 500g and installed. Ordered recovery discs for win 7 from lenovo. Four discs received - 1) startup recovery 2) operating system 3) drivers and applications 4) additional recovery disc. I power up the pc with d
-
Adding text to editable region creates space in the rest of my layout
I created my layout in PS, sliced the images and then imported to DW (html and images). Layout looks great. I created editable regions in the template I created from the .html One I start inserting text into these regions, my container moves and it t
-
Change language Prefs in App Store
living in the Netherlands but english speaking, how do I change to language prefs to English in the App Store my system is in English but for some reason or other the App Store is in Dutch
-
Safari and mail stopped working
iMac 27 just before the slim version, on latest operating system, mail and safari have stopped connecting to the Internet, diagnostics says everything is okay both for wifi and Ethernet but they will not work. Any sugestions my iMac 24, mac mini and