Can Anyone Tell Me About My Fe0/0 & 0/1 Ports please ?
Hi ...
I have been trying to set up my router for virgin broadband using Fe0/0 for the internet and 0/1 for the internal lan but the trouble i have is even though i have set up the ports and enabled them etc .. i still cant get the lan to work on the internet.
One thing i have noticed is that Fe0/0 will work on dhcp and will get the ip adress from the modem my Fe0/1 will not do dhcp even though it has been set to dhcp.
when you look at the interfaces it shows fe0/0 is dhcp but fe0/1 is nvram ??
can anyone tell me what i am doing wrong here as i have set ip route etc and gateway is set but why no dhcp on fe 0/1 ?
many thanks in advance
Ok ... now i have figured it out .. maybe ??
Both ports would operate dhcp if they was to receive an ip address from something providing one ...
which i suppose is the reason why i got an ip from my cable modem ... so all is fine there ...
The reason i am not getting the same from the fe0/1 port is because there is no dhcp server on my lan so it will not get one from anywhere ? im thinking ... so if im wrong please correct me
Thus having to supply a static ip for the fe0/1 meaning any other device would also have to be static on that same lan ??
And the problem of ip interface brief showing 0/0 on dhcp and 0/1 being nvram is due to the config not being saved and the router not being restarted for the settings to change ?
All well and good ... but i need to make my lan on fe0/1 work with my internet on fe0/0 so does that mean i have to set up a Vlan between the two ports ?
Thanks in advance
Similar Messages
-
Hi can anyone tell me about SAF for solutiondatabase in icwc
Hi ,
Can anyone tell me about how to configure SAF for the solution database in ICWC.What are the steps required to customize the enterprise intelligence for SAF for useing solution/knowledge database in CRM.
Harish rentlaHi
upon setting up SAF in the enterprise intelligence area you need to create the subject profile for the solution database for the maintanence of problems and solutions with the damage code location code and reasons codes and you need to do full indexing for the SDB for problems and solutions after pairing (joining)the 1 problem with one solution. you can access TREXADMIN transaction type for the trex config settings to view the index table status.
Trex RFC connectivity needs to be established between SAP and CRM systems then only you can use the wizard for the SAF tool to customise
please do reward points if helpful
Regards
Dinaker vikas -
pls can anyone tell me about the macKeeper application? is it safe and is it recommended by apple?
1. It’s something you don’t need or want.
2. No to both questions.
(117054) -
Can anyone tell me about 5700 fan power
i will upgrade my pc 5700.but everyone is talkin about heat sink and something about temp.so if the fan is not good enogh.what il do then or can anyone tell me about it plz im really pissed off and i dont know what to do.
AOpen 250watts is simply too weak to handle a High End card like this, not even mentioning to handle a P4 2.4B GHz CPU and a NEO2 mobo with 1 stick of 512MB DDR 333 RAM stablely...
I know that it's just simply too weak for the P4s now combo with a FX5600 series and above.
Post your PSU specs which is labelled to the PSU for a better understanding.
No Offence here, just stating the facts only . -
Can anyone tell me about BAdi customizing in simple terms?
Hi friends,
Can anyone tell me about BAdi customizing in simple terms? I need it a bit urgently.
Thanks in advance.
cheers,
JoyBADIs are known as Business Add-Ins. They are enhancements to the standard version of the SAP system. The application developer creates an interface for the add-in. From this, enhancement management creates an adapter class that implements the interface and thus provides the interface for implementation by the customer, partner, and so on. The developer then creates an instance of the adapter class in the application program and calls the corresponding method at the appropriate time. Enhancement gives SAP customers the ability to adapt SAP to suit specific requirements. It does not require a modification to standard code and code will not be overwritten during the upgrade.
In SAP, Business Add-Ins, Customer Exits and User Exists are used for enhancements.
Customer Exits provide predefined exit points from SAP source code, enabling you to insert your own code and locally enhance a standard application without having to get into SAP application logic.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality.
An application developer who wishes to have a Business Add-In in a particular program defines the interface for an enhancement in the Business Add-In Builder. In the following step, he or she programs the interface call in the application program at the appropriate place. Customers can then select the add-in and implement it according to their needs.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to differentiate between Add-In implementations using the filter Country or other criteria.
BADIs are Object Oriented techniques used for enhancements and nowadays they are widely used as a replacement for Customer exits. BADIs are predefined exit points in a source that allow developers to either insert their own logic during implementation or simply adopt one of the standard supplemental solutions provided by SAP.
A single Business Add-In contains all of the interfaces necessary to implement a specific task implementation. All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
Normally BADIs will be available within the standard programs and when we need some enhancements or if there is a change request made by the customer in the functionality, BADIs or Customer exits are used.
Types of Business Add-Ins:
u2022 Multiple use BADIs.
u2022 Filter dependant BADIs.
From SAP menu Tools-> ABAP Workbench-> Utilities-> Business Add-Ins-> SE18 u2013 Definition or else use SE18 (T-code). -
Can anyone tell me how to access the sync apps button please? I used to be able to select it but it is no longer visible.
You have to connect and select iPhone in computer iTunes Sidebar.
If you don't see the Sidebar, toggle it on in iTunes menu View > Show Sidebar.
Take a look at this screenshot on updating apps. -
Can anyone tell me about expiry dates for iTunes cards?
I thought that they expired either one or two years after the most recent use. Since the update to the site, I am no longer able to find either the T&Cs for iTunes cards, or details of expiry dates in My Account. Can anyone tell me where to get this info? Thanks.
iTunes cards do not have an expiration date. And, once you redeem them, they create a credit balance in your account, which also does not exprire.
However, nobody can guarantee that this will be permanent, so it would be best not to let them sit around for years. -
Can anyone tell me about this Thinkstati​on?
Can anyone tell me what model this is?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380056744393&fromMakeTrack=true
I am looking for a gaming machine and I prefer the P4 HT than any of these new dual and quad core processors. Does anyone know if I would be able to put in a modern high end GPU and upgrade the ram?
Thanks for any replies.that's a thinkcentre, not a thinkstation. search ibm.com for "8113-24U" for exact machine specs.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600 -
I bought a MacBook Air and wish to communicate with old iMac G5 2003-5 (sorry can't remember the year). The screen on the iMac is blank and will not come on but the hard drive still works. Can anyone tell me the cable I need to with the iMac & how to do it. I have music and photos on the iMac I cannot access.
Also, do I need to special CD/DVD external drive/burner to import music CD's into iTunes? I have tried and it keeps coming up with formatting problems.
Many thanks. Jaxdwb
I have looked for what you said and come up with these 2 cables. Are these the correct ones I need?
http://store.apple.com/us/product/HA833ZM/A/belkin-firewire-800400-9-pin6-pin-ca ble-2-m66-ft?fnode=51&fs=s%3DpriceLH
http://www.tekserve.com/store/networking-cables-adapters/cables-adapters/apple-t hunderbolt-to-firewire-adapter.html
Many tx again.
JAx -
Can anyone tell me about the Training Function?
Hi, friends
I am a fresh man learning Siebel and I find very little information about the training function in Bookself. Can you tell me where I can find the related information?
thanks.Hi,
what kind of treinament you find? A techical/functional treinament, a user application treinament.
If techinal treinament, the bookshelf is the better document to find information. You can use the forum, sites and Oracle Metalink to find you doubts.
If user application treinament, where user use the application and find about how to execute a process, you can use IHelp or your company can use Oracle UPK (User Productivity Key). You can create treinament in this tool and your users can acess the treinaments.
Regards. -
Hai all,
We are planning to implement Oracle Customer hub for Oracle Master Data Management.Please read the following link and tell me how to work on Oracle Data Governance Manager.
Where can i find it???
What are the steps involved in the implementation????
http://www.oracle.com/us/products/applications/master-data-management/oracle-customer-hub-439838.pdfHi Nandini,
DGM Software build can be downloaded from My Oracle Support via the "Patches and Updates" tab with patch number/name 9329831 (currently password protected; please log a service request and request a password).
DGM Installation:For information about how to install DGM are documented in siebel Maintenance Release Guide Version 8.1.1.x, Rev. O, Section: Installing Data Governance Management (DGM).
Steps to Customize the Data Governance Management (DGM) application (Doc ID 1323952.1)
Document provides steps to customize the DGM application, making it easier to change the skin via CSS stylesheet changes in the OOTB DGM application.
Reference: Oracle Master Data Management - Customer Hub (Siebel UCM) Information Center - Install Lifecycle (Doc ID 1081980.1) .
Thanks,
Shilpi -
OT- Can anyone tell me about these guitars (please own one!)
I am interested in anyone's personal experience with the following guitars while using Logic Studio:
TAYLOR T3
GODIN Multiac Spectrum Series Cutaway Acoustic Electric Guitar (yes, I know that it also requires the Roland GI-20 interface)
Of course, I am also interested the the technical issues, if any, when using the Godin with the Roland processor.
Thank you very much.I have used the Godin with my GI-20 interface. I was very impressed with the way it handled all the Logic synths. The only reason I don't own one is that the fingerboard is designed for rock/folk guitarists & I am a classical, flamenco, lute player. Consequently I need a much wider fingerboard. That is why I had my electric/synth guitar made for me.
If you can handle the Godin's fingerboard, buy one. -
Can anyone tell me about the SMS backup
hello.................... i just wanted to know about the backup of text messages that where i can make it and restore it.
Hi,
what kind of treinament you find? A techical/functional treinament, a user application treinament.
If techinal treinament, the bookshelf is the better document to find information. You can use the forum, sites and Oracle Metalink to find you doubts.
If user application treinament, where user use the application and find about how to execute a process, you can use IHelp or your company can use Oracle UPK (User Productivity Key). You can create treinament in this tool and your users can acess the treinaments.
Regards. -
Can anyone tell me about returns?
sending broken ipod back on warrenty so apple sent me a box to return it in but gave me no address sticker and it said in the literature that a corrier will come and collect it but they gave no indication of when.... anyone with any ideas as to where or what I can/should do?
Sent mine back this week. There should be a return UPS sticky label and bag to put it all in in packaging. Once this is done call the courier to arrange collection
-
Can anyone tell me about these little blue squares?
I'm trying to install PSE8 from disc onto my new laptop (mac running lion). It gets to this point but the Quit and Install buttons have a little blue box right over the text. It seems to disable the buttons where I can't select either. In order to close out of it I need to click the red button, not the Quit. I tested the same disc on a different machine and it looks normal.
Is this a flash or java issue?
Thanks in advance!I think it is more of the display issues , can you create a new user account , install the software and then check.
Create a new user account :- http://helpx.adobe.com/x-productkb/global/install-or-run-applications-new.html
Once installed log in back in the old account and check , if your applications run fine , delete the new account created to install the software.
Maybe you are looking for
-
I tried changing my Aplle ID on two devices before but I could not get the second device connected. I ended up resetting my accounts restore it. Any suggestions?
-
Installing Oracle 10g XE (Windows OS is Japanese and Database is Chinese)
Hi all... I want to install CHINESE Oracle Database 10g Express Edition Release 10.2.0.1.0 on Windows XP operating system is JAPANESE. Is this possible...? if yes, please guide me. In the installation process, i never come across the language selecti
-
Sequence number current session
hi sir, wanna ask, i use select seq_name.currval from dual is not working it ask to define in current session if i use .nextval then use currval then it works,,,even this is not first time increment,,,,so is there anyway to use currval without use ne
-
How the ACE handles rserver failures
Hello I've got a question re: the ACE module. Lets say I have 2 web rservers and I have a probe interval for checking them from the ACE of 10 seconds. Lets say a probe just passed and it is 10 seconds before the next one. The ACE will think the rserv
-
Want to change my apple I.D.
I want to change my apple I.D. but the email address i want to change it to is the email address i used as a secondary. Also I do not have access to my original apple I.D. email anymore.