Can anyone tell me how to port forward and setup an XBOX 360 using my Time Capsule??

Xbox 360
When playing the game online, the minimum speed of your network should be 128kbps. The ideal network speed for playing the game online is 768kbps. If you are having a problems with lag check the following:
Network Troubleshooting:
Disable any firewall or security features on your router.
Set port forwarding on your router to the IP address of your Xbox 360. This game uses port 3074 (UDP/TCP). Additionally Xbox LIVE requires ports 80, 53 TCP and 88, 53 UDP.
Place your Xbox 360 into the DMZ of your router.
Disconnect your router and try the game. If it works regularly at this point something about your router may not be completely compatible with the specific needs of this game. Check with your router manufacturer and Microsoft's Xbox Live Connection Issues page for additional steps that may need to be done to resolve the issue you are having. You can also verify that you have an Xbox Live compatible router.
If you are having issues connecting while multiple Xbox 360 consoles are connected on the same network, try forwarding port 3074 (UDP/TCP) for one Xbox 360 and setting the other as DMZ. There is a chance that this may not resolve you issue,  if it doesn’t then you may want to consider getting an additional public IP address by contacting your Internet Service Provider and assigning it to one of these two consoles.
NOTE: If setting port forwarding or DMZ helps your connection issue, you may want to assign your Xbox 360 a static IP address within your home network. This can help to ensure that the configurations you made do not need to be done again. You can visit PortForward's Static IP Guide for a detailed guide on how to do this.
NOTE: Many broadband internet modems are coming with routing capabilities built in. Please contact your internet service provider to determine if your internet modem has an integrated router. If it does, they should be able to assist you with the steps above for setting up your router.
Once you have verified that your network setup is not the cause of the issue, try the following:
Try connecting to a different server. Some servers may have other players connected to them that you do not have an optimal connection with. In most games this is accomplished by backing out to the main menu and then selecting multiplayer again. From there you can try connecting to another online game.
Run the Xbox Network Self Test to see how strong your NAT is currently set to. Once the test is completed you will be notified if there is an issue with your connection. If you select "More Info" you will be given information about your NAT type and some steps to resolve any issues with your connection.
Moderate and Strict NAT types may have issues connecting to online matches. You may get the error "Notice - The game session is no longer available." If you do then enabling UPnP, forwarding port 3074, or placing your Xbox in your router's DMZ may resolve this issue. Please consult your router documentation for instructions on how to do this.

ouman88 wrote:
Whoa....this just went way over my head.... I already have 6.1 installed for my Airport Utility.
Read again what I wrote.. 6.1 is the problem.. or part of it.
You need to install the earlier 5.6 version which I have given you explicit instructions to do.
I have done something now and can not connect the XBOX at all now....unless you can provide me step by step directions I may have to call Apple Support.
This will happen over and over.. just press reset and start again.. you need to learn how to do the setup and using 5.6 utility will help you.. as will using ethernet from the computer to the TC.. trying to fix things over wireless is like sitting on a tree branch you are sawing off. As soon as you update you will fall to the ground.
I am not that sure that Apple Support will have any idea.
Do a google search .. you will find most people struggle with this.. Microsoft made the xbox to use upnp with vista specs.. if you use a router without upnp, ie any apple router.. you will have issues.
Have a go at bypassing the problem.. I have no idea if this will work.. I do not use a TC as the main router because much of my network including xbox and ps3 is just a pain.. I use a modem router with upnp. And bridge the TC.. that is the setup I would recommend.
Try this.. once you have installed 5.6 utility.
Get the IP of the XBox and click enable default host.. and put the IP address in there.. this is called DMZ.. all unassigned packets are forwarded to this ip address.. it is like a port forwarding for all ports.
See if it helps.. If it does you will need to lock the xbox address so it doesn't change.. we can get to that.
Tell me what kind of broadband you have and what modem router first.. none of this will work if you have double NAT.

Similar Messages

  • Can anyone tell me how eject a disc and also the desktop shows no icon

    Can anyone tell me how to eject a disc from an imac.  Also the desktop doesn't show a disc icon.   Help!

    The very top row on your keyboard, right over the delete button, there is a button with a pyramid on it.  Push that button.
    Good luck!

  • How do I find and access files backed up using a time capsule on a different mac?

    I have been backing up files from two macs to a time capsule.  I had a problem with the time capsule and took it to an authorized facility for repair.  When I got it home and reconnected to it, the time capsule seemed to start over as though it was the first time it was ever hooked-up.  The repair facility says my old files are still there.  My question is, how do I find the original backup files and reconnect them to my macs?

    On one of your Macs.....try a right-click on the Time Machine icon on the dock and then select Browsel Other Time Machine Disks to see if you can locate your backups there.
    If you find them, you will be able to restore files from the disk as needed. The same would be true of your other Mac.
    If Time Machine started all over with a new backup of each computer....as I suspect is the case based on the info in your post.....you will not be able to combine the old backups with the new backups.
    To switch back to your new backups, click the Time Machine clock icon at the top of the screen and select Time Machine Preferences. Click Select Disk and click to highlight your Time Capsule disk. Then click Use for Backup.

  • HT4623 When i go to Settings General there is no option for software update.  Can anyone tell me how to update from 4.2.6

    Can anyone tell me how to update from 4.2.6? 

    Check to make sure you don't have two firewalls (i.e. a Windows firewall and one on your router).
    If that's not it, you may need to dig deeper ... like temporarily changing your router's DNS to use Google's DNS or OpenDNS instead of your ISP's DNS.  Or maybe open up a certain port on your router (not sure which one that would be though, sorry).  Or, if your computer is connected to the internet over wi-fi, try connecting to your router (or modem) via Ethernet, I heard of that solving a problem like this (though I can't confirm if that was real).

  • Can anyone tell me how to change the names of the networks I have set up on Airport Express

    Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

    Hi mkl1961,
    Happy Holidays!  The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.  
    Resetting an AirPort base station FAQ - Apple Support
    http://support.apple.com/en-us/HT3728
    What default settings will my AirPort base station have after a hard or factory default reset?
    AirPort base stations are set to request an IP address by DHCP.
    AirPort base station passwords are "public."
    AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    *A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port.  You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
    Airport Express Setup Guide
    manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
    I hope this information helps ....
    - Judy

  • I've used Firefox for years. 2 days ago it wouldn't open. I uninstalled it using Revo uninstaller and put it back. Its still the same. Can anyone tell me how 2 fix this or change my mail settings for I Explorer. thx

    and now it just wont open can anyone tell me how 2 change my mail going 2 firefox and start going 2 i explorer please

    For gmail there are no settings to change, you can access gmail from any browser just by going to the gmail site and logging in.
    The [[Firefox will not start]] article should help with the problem you are having with Firefox.

  • I am new to Mac Pro but am purchasing one online.  can anyone tell me how to get the information from my Toshiba onto the Mac.  there are no stores in the state I live in.  Do I need to find a location and will they do a transfer from my I Tunes etc?

    I am new to Mac Pro and am purchasing one online  tonight.  Can anyone tell me how to get my information - Itunes, photos, and videos transferred onto the Mac from my Toshiba.  the state I live in doesn't have an Apple store but I could take it to Minneapolis when I go.  Any ideas where to begin?

    You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.

  • Can anyone tell me how to I get an old account information and recorded messages from a conversation

    I am totaly confused by eircom and efibre.......last year I was in arrears with eircom to the tune of( as I thought) of €357.66and I was disconnected but in the long run I got a huge bill in my door of  €656.48 , when I had to the money to pay the original amount, I was put through to efibre who told me that remaining amount of €298.77 shouldnt have been on my account and they would take it off I was also given a new account and phone number. I have now got several bills from my old account plus a letter from a company called BCW (debt collectors) who are treathening to take legal proceeding against me...... can anyone tell me how do I get my old account information and that conversation I had that day??

    Thanks Tracey,I got a letter from the debt collectors BCW on Thursday to say if I didn't respond to that letter within 5 days they were going to take legal proceeding against me. 10 minutes from receiving the letter I got a call from BCW to say that eircom had been in touch with them to say the issue has been resolved and that I don't owe the money,I am now waiting on a letter from BCW to tell me same so as I have it in writing. So hopefully that is the end of the issue, Many thanks Confused 1

  • Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched?

    Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched or activated?

    If it's not printed on the card, then you'll need to check the receipt from the purchase of the card. There's no way to check the value from the card itself without redeeming it.
    Regards.

  • Hi, I recently changed my username for my iTunes/iCloud account. Can anyone tell me how i change the username on my iCloud iPad? When I go onto setting to change it it keeps the username grey so I can't even select it?

    Hi, I recently changed my username for my iTunes/iCloud account. Can anyone tell me how i change the username on my iCloud iPad? When I go onto setting to change it it keeps the username grey so I can't even select it?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • Can anyone tell me how to fix my iPod. I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.

    Can anyone tell me how to fix my iPod.I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.

    See the action for that error included here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Hello, can anyone tell me how to share my home macbook pro to my imac in the office? I tried file sharing but never worked for me...appreciate if anyone can help!

    Hello, can anyone tell me how to share my home macbook pro to my imac in the office? I tried file sharing but never worked for me...appreciate if anyone can help!

    I should have added to my posting (instead of using this "reply" -  it is the server passwork it is asking for and I have never known that I had one and assumed it was the passwork I always used for this type of thing.

  • I am trying to download music on to my 4th gen Ipod touch but it keeps saying that It is unable to download song/ could not download at this time. Can anyone tell me how to download my music?

    I am trying to download music on to my 4th gen Ipod touch but it keeps saying that It is unable to download song/ could not download at this time. Can anyone tell me how to download my music?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... (But can take Longer..)
    Release the Buttons...

  • My ipad is no longer syncing automatically when I connect to my macbook pro.  Can anyone tell me how to fix this?

    I've had an ipad since late December 2010.
    In the past, it has always automatically synced when I connect it to my macbook pro.
    Now, when i connect it...nothing happens.
    Can anyone tell me how to fix this?

    The first thing to do is to launch iTunes on your Mac. Go to Preferences - under the iTunes heading in the menu at the top. Click on Devices. Make sure that you uncheck the box next to - Prevent iPods, iPhones and iPads from syncing automatically. Quit iTunes and restart your Mac.
    Connect your iPad to the Mac and launch iTunes. Select your iPad under the Devices heading on the left side of iTunes. Then click on the Summary Tab at the top right side of the iTunes window. Put a checkmark (select) in the box next to  - Open iTunes when this iPad is Connected. Make sure that all of the other boxes are checked as you desire according to what you want to sync. Click - Apply - in the lower right corner to sync.
    Disconnect your iPad after syncing. Quit iTunes. Then connect your iPad again and iTunes should launch and sync automatically.

  • Can anyone tell me how to slow down a commerical track in Garage Band 10.00.  I was able to do it quite easily before I updated, but now find I am unable to do it.  Would be grateful for any help

    Can anyone tell me how to slow down a commercial track in Garage band 10.00  I was able to do this in the earlier version of Garage Band quite easily and it is a good tool for being able to teach new dances, but I find I am unable to do it in the new version, which has just been updated.  I would be grateful for any help.

    Just found it.
    Select your track with song imported from iTunes, open the Track Editor window, and in the head of the track editor  and press the "Flex" marker. Make sure "Enable Flex" is set,
    Then change the tempo of your project.

Maybe you are looking for

  • Java application deployment/setup

    I'm in need of some information about how to go about creating an installation program for my java desktop application. We have a big project due in two months and one of the requirements is that it needs to be deployable on any machine, including ma

  • How to add iPhone to my product list?

    How to add  my telephone serial number, if it's already registered here by another person? I got this phone in exchange for my broken previous one in tech. service, so I think that it was used by someone and registered. Please, help.

  • My ipod touch won't take or view pictures

    My ipod touch wont take or view my pictures help please?:(

  • Setting multi-value parameters using ReportExecutionService

    Does anyone know how to set multi-value parameters using ReportExecutionService in C#? If I have rsExec = new ReportExecutionService2005.ReportExecutionService(); ReportExecutionService2005.ParameterValue[] parameters = new ReportExecutionService2005

  • Pricing error in item 000025 Message no. VF073

    Hi All, When I goto vf02 it is giving error "Pricing error in item 000025 Message no. VF073" When I double click on item 25 & goto "condition" it is giving error "Pricing error: Mandatory condition ZY01 is missing Message no. V1801",although I do not