Can anyone tell me how to
c
an anyone tell me how to switch my operating system from
64 bit to 32 bit
You cannot just "switch" from 64bit to 32bit; install the 32bit version.
Similar Messages
-
and now it just wont open can anyone tell me how 2 change my mail going 2 firefox and start going 2 i explorer please
For gmail there are no settings to change, you can access gmail from any browser just by going to the gmail site and logging in.
The [[Firefox will not start]] article should help with the problem you are having with Firefox. -
I am new to Mac Pro and am purchasing one online tonight. Can anyone tell me how to get my information - Itunes, photos, and videos transferred onto the Mac from my Toshiba. the state I live in doesn't have an Apple store but I could take it to Minneapolis when I go. Any ideas where to begin?
You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.
-
Can anyone tell me how to I get an old account information and recorded messages from a conversation
I am totaly confused by eircom and efibre.......last year I was in arrears with eircom to the tune of( as I thought) of €357.66and I was disconnected but in the long run I got a huge bill in my door of €656.48 , when I had to the money to pay the original amount, I was put through to efibre who told me that remaining amount of €298.77 shouldnt have been on my account and they would take it off I was also given a new account and phone number. I have now got several bills from my old account plus a letter from a company called BCW (debt collectors) who are treathening to take legal proceeding against me...... can anyone tell me how do I get my old account information and that conversation I had that day??
Thanks Tracey,I got a letter from the debt collectors BCW on Thursday to say if I didn't respond to that letter within 5 days they were going to take legal proceeding against me. 10 minutes from receiving the letter I got a call from BCW to say that eircom had been in touch with them to say the issue has been resolved and that I don't owe the money,I am now waiting on a letter from BCW to tell me same so as I have it in writing. So hopefully that is the end of the issue, Many thanks Confused 1
-
Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched?
Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched or activated?
If it's not printed on the card, then you'll need to check the receipt from the purchase of the card. There's no way to check the value from the card itself without redeeming it.
Regards. -
Hi, I recently changed my username for my iTunes/iCloud account. Can anyone tell me how i change the username on my iCloud iPad? When I go onto setting to change it it keeps the username grey so I can't even select it?
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too. -
Can anyone tell me how to fix my iPod.I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.
See the action for that error included here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Hello, can anyone tell me how to share my home macbook pro to my imac in the office? I tried file sharing but never worked for me...appreciate if anyone can help!
I should have added to my posting (instead of using this "reply" - it is the server passwork it is asking for and I have never known that I had one and assumed it was the passwork I always used for this type of thing.
-
I am trying to download music on to my 4th gen Ipod touch but it keeps saying that It is unable to download song/ could not download at this time. Can anyone tell me how to download my music?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... (But can take Longer..)
Release the Buttons... -
I've had an ipad since late December 2010.
In the past, it has always automatically synced when I connect it to my macbook pro.
Now, when i connect it...nothing happens.
Can anyone tell me how to fix this?The first thing to do is to launch iTunes on your Mac. Go to Preferences - under the iTunes heading in the menu at the top. Click on Devices. Make sure that you uncheck the box next to - Prevent iPods, iPhones and iPads from syncing automatically. Quit iTunes and restart your Mac.
Connect your iPad to the Mac and launch iTunes. Select your iPad under the Devices heading on the left side of iTunes. Then click on the Summary Tab at the top right side of the iTunes window. Put a checkmark (select) in the box next to - Open iTunes when this iPad is Connected. Make sure that all of the other boxes are checked as you desire according to what you want to sync. Click - Apply - in the lower right corner to sync.
Disconnect your iPad after syncing. Quit iTunes. Then connect your iPad again and iTunes should launch and sync automatically. -
Can anyone tell me how to slow down a commercial track in Garage band 10.00 I was able to do this in the earlier version of Garage Band quite easily and it is a good tool for being able to teach new dances, but I find I am unable to do it in the new version, which has just been updated. I would be grateful for any help.
Just found it.
Select your track with song imported from iTunes, open the Track Editor window, and in the head of the track editor and press the "Flex" marker. Make sure "Enable Flex" is set,
Then change the tempo of your project. -
Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Can anyone tell me how to download a DVD to iTunes and then onto my ipad? I presume that's legal?
Can anyone tell me how to download a DVD to iTunes and then onto my ipad? I presume that's legal?p
If you're talking about a commercial DVD and you're in the U.S. (and a number of other countries), you presume incorrectly. Commercial DVDs are encrypted and breaking that encryption is illegal. For non-encrypted DVDs, use Handbrake.
-
I deleted my back up files from my external hard drive and my trash won't empty. I get an error code -22. Can anyone tell me how to fix this?
JLCruz wrote:
I deleted my back up files from my external hard drive ...
If this is related to Time Machine Backups...
See here > Should I delete old backups? If so, How?
From Here > http://pondini.org/TM/FAQ.html
If the TRASH still won’t Empty...
See Here > http://pondini.org/TM/E6.html -
Can anyone tell me how to find what OS I'm using on the Mac?
Tiger or Leopard?
Also, how do I update from 10.6.8 to the latest version?Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
You current OS X version number will be shown as I've marked.
OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
Whether or not you can go to the latest OS X version depends upon your hardware -
You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater. -
Hi, I am using USB 8476s to communicate to a slave unit in LIN network. Can anyone tell me how i can send a header frame plus 1 byte of data to the slave in a LIN network. or how do I communictae with slave using LabVIEW7.1.
I want to read responses from the slave. When i tried with labview exapmle programs or even using MAX also, while doing some switching action in my slave, i am getting response as Device inactive with timestamp but there is no data format.
And I have Lin Description File. Can you suggest me how to use ldf file.
I am at customer place and It would be great help from you if you can suggest me at the earliest. Thank youyou may use the LDF Starter Kit to use LDF informations in your application
http://joule.ni.com/nidu/cds/view/p/id/665/lang/en
Maybe you are looking for
-
Data Source is in Inactive state while replicate datasource in BI 7.0
Hello, When I replicate the datasource ZW_MAT_PLANT(My own data source which is combination of MARA and MARC) in RSA1-Datasources it is coming by default in inactive mode. In this inactive mode i can not delete this data source assignment adn i can n
-
HT1473 Podcast Error Message "The network connection could not be made."
Any Help. Just switched my ipod to a new windows 8 computer. ipod was recognized. Thanks
-
How to create a Business Partner with internal number assignment
Hello, We are using a CRM 7.0 system. We want to create a new Business Partner using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03 to perform it. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortun
-
Restoring Backup Set to New Host
Hi Team, I am working on the RMAN Restore operation on the New Host. I had taken the hot backup of my database (name :Test) with all ControlFile, DataFile, & Archivelog Files using RMAN backup command, RMAN>backup database plus archivelog; Now I want
-
InputStreamReader: reads too much?
i read text from an InputStreamReader: int count; char[] chars = new char[2048]; while ((count = isr.read(chars, 0, chars.length)) != -1) { textArea.append(new String(chars)); }and noticed that too much text is read! I i increase chars (e.g. 4096