Can anyone tell me the mAh needed for the iPhone 5?

I am looking to purchase an Emergency USB cell phone charger and want to make sure there is enough power (but not too much) in the device.  I can't seem to find the answer yet???  I purchased one and it did not say anything about how much power it has but it did say it will work with the iPhone 5.  I should know better than to believe something that an after-market manufacturer posted but I was hopeful.  It worked from 0 battery to 12% and then said "not compatible with this phone" (or something like that). 
I am not knowledgeable about power, iPhones, horse training and many other things , but I hope to learn on this forum since I just bought my first iPhone and am trying to figure all this out.  I need to be able to carry a power source with me when I am away from electrical outlets and such.
Any input is mucho appreciatedo!   Thanks!

Thanks Peter, but what I am looking for is something like http://www.amazon.com/Portable-Battery-Powered-Emergency-Flashlight/dp/B003ZUPDR 2.  I would like an external pack that takes batteries and can be quickly used to recharge my iPhone 5.  There are a lot of them like this one on the market but I need to figure out the power specifics needed for the iPhone 5.  I will also be buying these for gifts for about 45 people for an event this summer so I am doing the testing with my iPhone and hoping to find something like this.

Similar Messages

  • I bought a MacBook Air and wish to connect with old iMac 2003-5. The screen on the iMac is black. Can anyone tell me the cable I need to do this please. I have music and photos on the iMac I cannot access. Many thanks. Jax

    I bought a MacBook Air and wish to communicate with old iMac G5 2003-5 (sorry can't remember the year). The screen on the iMac is blank and will not come on but the hard drive still works. Can anyone tell me the cable I need to with the iMac & how to do it. I have music and photos on the iMac I cannot access.
    Also, do I need to special CD/DVD external drive/burner to import music CD's into iTunes? I have tried and it keeps coming up with formatting problems.
    Many thanks. Jax

    dwb
    I have looked for what you said and come up with these 2 cables. Are these the correct ones I need?
    http://store.apple.com/us/product/HA833ZM/A/belkin-firewire-800400-9-pin6-pin-ca ble-2-m66-ft?fnode=51&fs=s%3DpriceLH
    http://www.tekserve.com/store/networking-cables-adapters/cables-adapters/apple-t hunderbolt-to-firewire-adapter.html
    Many tx again.
    JAx

  • I need to upgrade my OS from Snow Leopard 10.6.8. I can't decide between Lion or Mountain Lion can anyone tell me the difference between the two?

    I need to upgrade my OS from Snow Leopard 10.6.8. I can't decide between Lion or Mountain Lion for my upgrade can anyone tell me the difference between the two?

    Click here for information.
    (125089)

  • Can anyone tell me the field name, table name for the following scenario?

    Hi All,
    Can anyone tell me the field name and the respective table name for the following scenario's?
    1. A report to list all the materials to which Invoice is done and delivery is pending.
    2. A report for Order tracking.
    3. A report, which gives PO(Purchase Order),  Pricing details.
    4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from  stock.
    Thanks & Regards,
    P.Gowrishanker
    Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AM

    I believe that OmniVision Technologies has the contract for the 3gs.

  • Can anyone tell me the naming conventions for PSa tables

    hi all,
    After the data is loaded into the psa. how to look at the records that are there in psa. And can anyone tell me the naming conventions for psa tables.
    like BIC/????
    thanxs in advance
    regds
    hari

    Hi Hari,
    You want to know the naming convention of PSA table. For that there is a simple technique try this.
    Go to - T code SE11
    In the database table check box give  /BI*  and click search
    next window  in the Description Text box give the r data source name(master)  like
    YIO_ID_ATTR which is assigned to infosource. then click OK.
    then you get the psa table structure.
    You can take structure and check in the T code SE 11
    Hope this is fine.
    Regards
    Sreekanth

  • Can anyone tell me the launch date for Apple ipad mini cellular in India...

    Can anyone tell me the launch date for Apple ipad mini cellular in India...

    I want Apple ipad mini Cellular in india. what should i do.
    I am buying apple product for fist time.

  • Can anyone tell me the syntax for sendkeys

    Can anyone tell me the syntax for sendkeys-sbo_application.SendKeys("+()") is
    not working

    Hi,
    Have you seen the folowing messages?
    Re: Tab key and lookup table
    Sendkeys("+({TAB})")
    Hope it helps
    Trinidad.

  • I have a MacBook Pro 17 inch and I just destroyed the screen.  Can anyone tell me the keystrokes to turn on the external display as primary?

    I have a 17-inch MacBook Pro with a destroyed screen.  (My son put it on the top of his car and drove off and it fell off.)  Can anyone tell me the keystrokes to make an external monitor the primary monitor?  I can see only the upper left side of the laptop screen so I CAN select system preferences.  I can then arrow over to system preferences and down to make selections I cannot see.  I don't know then what to do or IF I can make the choices needed to make the external monitor primary when all I can do is make keystrokes on items I cannot see.  It's an older (about 2008) MacBook Pro and I would like to use the external monitor to see to connect an external hard drive and download files to install on a new MacBook.  My son might know the iOS but I don't.

    • I don't know then what to do or IF I can make the choices needed to make the external monitor primary
    This is the left side of System Preferences in OS 10.8.3. (if that is not what the MBP is running post back). By the way, if you can grab the top of that pane you could move it over to the top far left. - Same for any pane.
    Do this with the external monitor connected and powered on.
    You need to click on Displays., and then grope for Arrangement and click there.
    When you get there, the two screens are shown.
    The trick is to grab the white stripe (on the left in this image) and move it to the other rectangle. You do not have to position it exactly, it snaps into place when it gets close.

  • I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

  • Can anyone tell me the steps to setup my lc550 os7.5 internet software

    Need help
    can anyone tell me the step by step instructions to setup the software and connect my old mac lc 550 with os 7.5 and apple ethernet rj45 card to the internet.

    A plain System 7.5 would have a MacTCP control panel. You can find details about MacTCP configuration under the link that BDAqua provided above.
    The setup can be easier with an operating system running Open Transport networking. Such a system would have a TCP/IP control panel instead. Although it is possible to update an earlier system to Open Transport, many prefer to just install a complete version 7.5.3 that can be downloaded from Apple.
    http://www.info.apple.com/support/oldersoftwarelist.html#system
    (nineteen files, System_7.5.3_01of19.smi.bin et cetera)
    System 7.5.3 contains a Network Software Selector, which can be set to Open Transport networking. With the TCP/IP control panel active, the Internet setup is similar to the one for Mac OS 8 and 9. Typically, DHCP is used.
    http://support.apple.com/kb/TA20782
    If you need additional information about how to transfer and install System 7.5.3 (and programs), please post back. If so, tell us what you have to work with (for example, old/new Mac, a Windows PC, USB floppy drive).
    You would need a web browser (such as iCab or WannaBe) and/or an appropriate email program. Please note that the 68030 processor in the LC 550 means that Internet access is going to be very slow. Ideally, only text-based browsing or email should be used.
    http://support.apple.com/kb/sp215
    Jan

  • Can anyone tell me the flow of BDC program?

    Hi
    Can anyone tell me the flow of BDC program and also what is the significance of each step?
    Thanks
    Gagan

    Not sure what you are asking here.  A BDC program is a recording over an SAP transaction.  The flow is determined by the screen sequence of the transaction which is being recorded. 
    What you do is fill an internal table with screen numbers and fields with values and fcodes.  Then call the transaction using the internal table.
    For example, the following program calls PA30 and enters a time event.
    report zrich_0001
           no standard page heading.
    parameters: p_pernr type pa0002-pernr,
                p_plans type t528b-plans.
    data: mode type c value 'N'.
    data:   bdcdata type table of bdcdata    with header line.
    data:   messtab type table of bdcmsgcoll with header line.
    start-of-selection.
      perform do_transaction using 'P10'
                             p_pernr
                             p_plans.
    *       FORM do_transaction                                            *
    form do_transaction using timev
                              pernr
                              plans.
      data: bdcdate(10) type c,
            bdctime(8) type c.
      call function 'CONVERT_DATE_TO_EXTERNAL'
           exporting
                date_internal = sy-datum
           importing
                date_external = bdcdate.
      write sy-uzeit to bdctime.
      clear bdcdata.  refresh bdcdata.
      clear messtab.  refresh messtab.
      perform bdc_dynpro      using 'SAPMP50A' '1000'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=INS'.
      perform bdc_field       using 'RP50G-PERNR'
                              pernr.
      perform bdc_field       using 'RP50G-TIMR6'
                                    'X'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'RP50G-CHOIC'.
      perform bdc_field       using 'RP50G-CHOIC'
                              '2011'.
      perform bdc_dynpro      using 'MP200000' '2500'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'T705H-GTEXT'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=DIFP'.
      perform bdc_field       using 'P2011-LDATE'
                              bdcdate.
      perform bdc_field       using 'P2011-LTIME'
                              bdctime.
      perform bdc_field       using 'P2011-SATZA'
                              timev.
      if timev = 'P10'.
        perform bdc_dynpro      using 'MP200000' '2221'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'P2APL-PLANS'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=DOIT'.
        perform bdc_field       using 'P2APL-OTYPE'
                                'A'.
        perform bdc_field       using 'P2APL-PLANS'
                                plans.
        perform bdc_field       using 'P2APL-WAERS'
                                'USD'.
      endif.
      perform bdc_dynpro      using 'MP200000' '2500'.
      perform bdc_field       using 'BDC_CURSOR'
                                    'P2011-LDATE'.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=UPD'.
      call transaction 'PA30' using bdcdata
                                    mode mode
                                    messages into messtab.
    * If error occurs, give message and come out.
      if sy-subrc <> 0.
      endif.
      clear bdcdata.  refresh bdcdata.
      clear messtab.  refresh messtab.
    endform.
    *       bdc_dynpro
    form bdc_dynpro using program dynpro.
      clear bdcdata.
      bdcdata-program  = program.
      bdcdata-dynpro   = dynpro.
      bdcdata-dynbegin = 'X'.
      append bdcdata.
    endform.
    *        bdc_field
    form bdc_field using fnam fval.
      clear bdcdata.
      bdcdata-fnam = fnam.
      bdcdata-fval = fval.
      append bdcdata.
    endform.
    Regards,
    Rich Heilman

  • Can anyone tell me the class diagrams of a simple java notepad

    hi,
    Can anyone tell me the class diagrams of a simple java notepad.
    i'm a very beginner in UML.
    thanks in advance.
    Moazzam

    Don't worry too much about that. Figure out what it needs to do. Then grab JUnit and start writing tests & code.
    On xprogramming.com there is a series of articles developing a notepad type app in C#. That might be of some help.
    Dave

  • Can anyone tell me the senarios in which database crashes

    hi
    can anyone tell me the senarios in which database crashes other then backup recovery concepts.when the databse goes live
    regards,
    swapna.s

    Those sort of errors would mostly be TNS errors when the database server runs out of memory (memory configured for Oracle, swapping, number of network connections limit) etc...
    Other than that, if the application is written badly (which I hope is not the case), then users may face deadlock situations but those would be handled by Oracle automatically.
    Of course, these errors can be handled by properly tuning the database or the application.

  • Can anyone tell me the iPad customer support hotline phone number I have 133622 but no connection thanks

    Can anyone tell me the AppleCare phone number for wa I have tried 133 622  but no response
    Thanks

    http://support.apple.com/kb/HE57
     Cheers, Tom

  • Can anyone tell me the difference in performance between CSS URL switching

    first
    Can anyone tell me the difference in performance between CSS URL switching and F5 Big-IP?
    second
    Can anyone tell me the difference in performance between CSS URL switching and alteon ?
    third what is best overally?
    i think alteon is best
    is that right?
    best regard

    It looks like the primary question here is performance, in which case:Performance is not an issue, so long is it is sufficient. In the case of CSS 11000 and Alteon, performance fall within the same order of magnitude (supporting web sites with several billion hits per day.) F5 does not have sufficient performance, due to platform and OS limitations (I’ve heard as low as 50 connections per second in complex configurations). The Cisco CSM posts up over 10x the performance at 200k flows/second.
    Typically the primary concern is features, then CSS 11000 switches lead with a wide and flexible array of features that are not only helpful to network and web administrators, but well integrated too. CSS 11000 switches offer configuration through CLI, Web GUI, and XML. CSS 11000 collects statistics that can be exported to non-Cisco applications for billing and management.
    The CSS11000 also supports URL load balancing and HTTP header balancing within one content rule, with complex matching. Further, it supports user agent, pragma/no-cache, host field, cookie field, language field, accept, accept charset, accept-encoding, and Connection within the http header field.
    In addition, the CSS11000 matches up to 128 bytes with support of wildcards anywhere within the string.On the other hand, Nortel (Alteon) - HTTP header load balancing is not supported on the same VIP as URL load balancing. Eg. This means that a simulated WAP user cannot be directed to a server while load balancing "normal" browsers to their servers based on URL without using two separate VIPs. Only ONE http header load balance is supported on the entire switch. This limits you to either User Agent (WAP, Netscape, IE, Palm, etc), OR pragma/no cache (do not send the user to cache, allow (the user) to go to the origin), or Host field (allowing you to direct on domain name), or Cookie. Also, Nortel does not support the language field.
    In regards to F5, many of the performance claims are based on HTTP 1.0 requests (most web sites today are not using HTTP 1.0), Many emerging applications rely on HTTP 1.1 rather than HTTP 1.0. Also, the BIG-IP cannot spoof the connection to detect the URL, cannot do NAT on the flow, and cannot maintain states for persistent connections.
    Overall, I think CSS switches are the lowest cost to own, and most effective of all the load balancing platforms on the market.

  • Can anyone tell me the difference between the rss.xml and podcast.xml?

    I have the Podcast maker program. Can anyone tell me the difference between the rss.xml and podcast.xml? How do they differ? What do I use each of them for? Where should I put them in my directory?

    Podcast Maker sets up your podcast from media files you enter into it; you enter the summary and description. It then publishes to your iDisk or other server, and in the process created the podcast.xml file which you can submit to iTunes.
    It doesn't create an rss.xml file: it sounds as if you are also creating the podcast in iWeb, which does. This has the advantage of creating a web page; it will also create the rss.xml file.
    Both are valid - of course if there are any differences between the version in Podcast Maker and the version in iWeb then the xml files will be different. But basically you seem to be creating two versions of the same podcast - if you are making it in iWeb then the Podcast maker version is really redundant (though I prefer it for podcast creation). If you want to go on using both I should use the podcast.xml feed it creates.

Maybe you are looking for

  • PrePositioning Scroll to a specific Row in  ALV Grid

    I have an object of type cl_gui_alv_grid which is about to display, let's say, 200 rows. I want it to come up pre-scrolled down to say row 80 - any ideas ? I still want 200 rows available. Any ideas (via a public method) ? Is there an option that can

  • Captivate 8: Can you convert a responsive project to a non-responsive project?

    My co-worker created a responsive project, but she didn't really understand the use case for responsive design, and now we have a bunch of learners who can't view the HTML5 (they have antiquated browsers that they cannot update) and I need a quick fi

  • Installation ended prematurely because of an error.

    Hi There, could need a bit of insight. I am trying to update my XI 3.1 installl with SP2.3. SP2 installed ok but installing FP1, 2, or 3 fails with the error message in the subject line. Sometimes the install does not even start. After running the ex

  • Firefox crashes and can't scroll anymore unless I force close the browser.

    I'm on a Mac OSX and after I start firefox, I go to Youtube, and then the video starts lagging. After that, I can't scroll up or down. In that case, I have to force close firefox and it works again. A few hours later, the same thing happens. When I r

  • Another hidden message in a photo? Some help...

    Hi all - Is anyone able to help me?  As part of a scavenger hunt, I have a photo that has a hidden message in it.  I will post the photo here.  I have played with the contrast, hue and colors, and know the information is thee, I just cant get to it.