Can anyone tell me what the codes following dictionary entries are in the Australian English dictionary add-on?
Most entries have codes after them, eg:
abalone/MS
abase/LDSG
abaser/M
abash/LGDhS
abbreviate/nDGNS
aberrantes
aberration/SM
Abilene/M
abjure/yDNSnRG
I can't establish a pattern for them...can anyone tell me what they are for, and if they can be deleted?
That are flags to specify what kind of data that entry is and how it can be expanded with a prefix and suffix. The accompanying file *.aff define what those flags mean.
Similar Messages
-
Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
Fans are running permanantly and this is the error I get when running apple hardware test.SNS is a sensor error. The sensors read actual temperatures at several points inside the Mac chassis to decide when things are heating up, and which fan or fans speed up to improve cooling.
Some of those sensrs are just a thermal-sensitive transistor mounted to a surface that conducts heat, and replacement does not run into big money. Disconnected wires are sometimes a possibility, especially if things were changed nearby, e.g., new heatsink. -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro
The motor on the exhaust fan has failed or is failing.
-
When i called *611 to check my order statud for my 6+ it said 'revieved and activated'
Can anyone tell me what that means?Hello ElAnBr10! So sorry for any confusion over your order status. I would take that comment ("received and activated") to mean exactly as it sounds: The device was shipped, received and activated. In order to confirm that, I propose we take a detailed review. I've sent you a direct message as a follow up to your post. Please reply there!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.
Unplug your iBook from the AC power, shut it down and take the main battery out for about fifteen minutes. Then you can put the battery back in, plug the power back in and restart. This should reset the USB and FireWire ports.
If that doesn't help, you could reset the Power Management Unit. Follow the instructions in Knowledge Base Article #14449 for resetting your PMU.
You probably should also startup from your Mac OS X install disk and run the Disk Utility to "repair disk" on your hard drive. This will determine if you've got some kind of file directory/software problems with the files on your hard drive.
I'm not much at decoding kernel panic logs, but this line jumps out:
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.udf(1.4.1)@0x28a79000
Did you have a DVD movie in the drive at the time? DVD movie disks are UDF format, but not much else is.
-Doug -
Suddenly, I am seeing an error message that reads: "The iTunes Library cannot be saved. An unknown error occurred (-54)". Can anyone tell me what that means? Am I in danger of my iTunes library being lost?
== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad. -
I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?
The battery is fully charged so it is not the problem.
What happens when you use the MagSafe? -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord. I purchased a 3 banded AV extension but it doesn't work. I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?
Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability. -
I'm trying to update my iPad but it says I don't have enough available storage. But I have more than enough can anyone tell me what the problem is?
Well, we can't as we don't know what you consider as "more than enough". The built is quite heavy (like it can be 800mb) then it needs to be extracted to be installed before everything unneeded gets deleted...
-
Can anyone tell me how to do this in Flash? See the following link?
Can anyone tell me how to do this in Flash? See the following
link?
See this link. I want to know how to create the painting
excercise as made here.
http://disney.go.com/disneychannel/playhouse/littleeinsteins/activities/paint.htmlStart by looking at the drawing api for AS
-
we have a movie downloaded on a laptop connected to the internet pluged into our router in the basement and an apple tv upstairs trying to play the movie through home sharing but it wont play. can anyone tell me whats wrong? it comes to the last loading page where it shows the desscription of the movie befor it acually plays.
It can come about without any change done by the user, and it's not just from other networks. The placement of the router can also affect performance. Also make sure router is up to date.
Apart from that would be the reboots. -
Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
Can anyone share their experiences and how to with me?
Thank in advance.
KatherineHi Katherine,
yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
HTH
Borys
Maybe you are looking for
-
I have an HP Pavilion HPE h8-1120 Desktop PC with 8 Gig of RAM. I want to upgrade to the maximum allowable 16 Gig. There are only two slots so I'm looking for a pair of 8 gig sticks. Can't find any on HP's recommended vendors website. Any ideas?
-
Hi Everybody, i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not). I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which al
-
Problem in credit memo request
Dear Guru's, I have created a credit memo request with refrence to a standard invoice, in which they are 7 line items and there is manual excise. after i have saved and i went to display mode and selected header conditions, in that the taxes were cha
-
How to uninstall and reinstall PS after hard drive erased?
How do I uninstall and reinstall PS after my hard drive has been erased? I tried the uninstall icon but it came up as error and now is gone.
-
Import sequence files from 29.976 to 23.976....HELP!
Hi All, Can someone help me with this very annoying issue. I work with Nuke X, Assimilate Scratch and Maya. 99% of the time I am transfering image sequence files from program to program. When I import a sequence file into premiere cs5 or even cs4,