Can anyone throw any light on this message: Error 1095
Since upgrading to Presenter 7 I have experienced a lot of compatability issues with the pulg-in.
Recently Presenter 7 got into an error loop with PPT and so I decided to un/re-install, but rec'd this error: Error 1905:Module C:\Program Files\Adobe\Presenter 7 Atldb.dll failed to unregister HResult - 2147220472. I cannot find this file.
Now I cannot get the plug-in working again...each time I activate the plug-in I get a 'serious error' message from PPT and it asks me to de-activate, and so it goes in a loop. I have re-installed XP, Office 2003 and Presnter 7 with no beneficial effect....any clues on this problem?
Hi 23Orchard,
If your iPhone is timing out when connected to your computer, it sounds like a connection issue.
Please try the things listed in
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Where one of the errors it addresses is
An alert messages indicates "iPhone has timed out" during syncing.
Thank you for visiting Apple Support Communities.
Nubz
Similar Messages
-
WHen I connect my iPhone 5C to my laptop containing my iTunes Library, nothing happens for a couple of minutes and then I get an error message saying phone timed out. Can anyone shed any light on this problem please?
Hi 23Orchard,
If your iPhone is timing out when connected to your computer, it sounds like a connection issue.
Please try the things listed in
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Where one of the errors it addresses is
An alert messages indicates "iPhone has timed out" during syncing.
Thank you for visiting Apple Support Communities.
Nubz -
I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?
Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.
-
can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?
As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US -
user icon replaced with user icon containing ? Cannot access my system.
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Version 18.0.2
Try to disable the automatic restart to make it easier to check the cause or open the event viewer to check this.
*Control Panel > System > Advanced > Startup and Recovery > Settings : untick "Automatically restart"
*Control Panel > Administrative Tools > Event Viewer
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps. -
I have been trying for weeks to download update 10.7.5 and cannot do so. I do get a message at the end - "connection reset by peer". Can anyone shed any light on why I cannot download this update and what the message may mean? Thanks.
Take a look at this discussion and the ones listed under "more like this" in the right column:
https://discussions.apple.com/thread/4166820?start=0&tstart=0 -
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
I am trying to register my Appliances and when I try to click on "Save" or "Submit" I am unable on my MacBook pro. I have tried different browsers yet still same problem. Can anyone shed some light on this please.
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Am trying to upgrade iPad 2 to 6.1.2 and it shows error like "Unable to verify Update" you are no longer connected to the internet. But am connect to my wi-fi. Can somebody throw some light on this.
============================================================
Throws error saying
"Unable to Verify Update"
iOS 6.1.2 failed verification because you are no longer connected to the internet
============================================================
Can anybody please respondTry this and see if it resolves the issue.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Then try again. -
So I downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.
login and download your software from the adobe volume licensing website, Customer resources | Adobe Buying Programs
-
Plugged in Apple TV, Apple symbol appears the a view of the rear of the box with a USB lead going to an iTunes symbol? Can anyone shed some light on this oh and it doesn't go past this point
You need to grab a micro usb cable and restore via iTunes
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
Can anyone put some light on this issue.
When transferring PO idocs from R/3 to the middleware, some idocs doesn't reach the destination due to one buyers address segment not getting populated.
Since this segment contains the address where it needs to to sent is missing, the idocs does not reach the concerned place.
But when the output is repeated, this segment gets filled up and idocs correctly reach the destination
In the program this segment is populated on the following condition.
The address number from the table T001W should match with the address number from the table ADRC..
if sy-sucrc eq 0, the segment gets populated else it does not.
But when the output is repeated in the PO, the sy-sucrc becomes zero again.
I don't understand the connection between when the output is repeated and the above condition.
How the above condition is getting successful when the output is repeated..
Can anyone put some light on this issue.I have one customized field 'ZCOORNAME' in the DS 2LIS_05_Q0NOTIF. I have changed this field in Tcode- QM02 and checked the changes in TCODE - LBWQ (Extraction Queue) and I got the Changed entry but now when i am trigerring the V3 Job, these changes are not getting populated in RSA7 (Delta Queue).
For standard field changes, it is capturing delta properly, the problem is with only customized fileds..Can anyone put some light on this issue ....
Please try activating the datasopurce again and try it.
Can you pls le me know when will be the Customer Exit(CMOD) is going to hit ? Before the Delta Queue or After the Delta Queue or is it before the Extraction Queue / After the Extraction Queue ???
he customer exit is hit before the entries are populated in extraction queue. Actually, when the transaction is done, the changes are written to database table and at the same time into the extraction queue. Just before going to extraction queue, the custom fields get populated in customer exit. -
I have an issue login into lightroom mobile on my desktop, it keeps coming up with Lightroom has experienced an unexpected sign in failure. Please try again later.(Attempt to index a nil value can anyone ahead some light on this please?
Have you tried this workaround?...Error: "Unexpected Sign in failure...nil value" when syncing to Lightroom mobile | Mac OS
Maybe you are looking for
-
Problem while loading a jar file into database
Hi All, We are using Oracle 8.1.5 in Solaris. When I try to load a jar file into the database by using loadjava it gives the following error Error while processing jar cryptix32.jar Exception java.io.IOException: Load Java is unable to handle compres
-
How do I Hide the text printed from a standard Text Element in SAP Script?
Hi, I have created one SAP Script which gets printed from IW33 using a standard print program. In config the standrad SAP script is replaced by the zsap script. Since the Zscript is printed from a Standard print program, I had to keep all the text el
-
Ipod to tv slide show and play music
Hi I want play a slide show with my pictures and play music through the ipod as well. I have a dock connecter which connects through S video and sound through red and white connector leads. When the ipod is not in the dock i can do both but i can onl
-
Array of Parameters in OWB mapping
How do i pass an array of parameters to an OWB mapping.
-
After updating to 10.5.7, characters I type into XEmacs are scrambled. For example, when I enter 'bcd", I see '071' on the screen. I didn't have any problem with 10.5.6.