Can Aperture display the in-camera ratings from the Canon 5D MkIII?

I think at one point, Aperture was able to display the in-camera ratings from the Canon 5D MkIII. It will not longer do that, and I am wondering if anyone else has found a way to make it work.
Thanks -
Dudley Warner

Welcome to Apple Communities
No. You can use it to stream your iPhone or iPad

Similar Messages

Can you display more than one library from the same account?

If I open iTunes on two computers in my house, I can only show one library on my apple tv. When I turn on the second computer, the first library goes away.
Can you show one at the same time?
Thanks

Welcome to the Apple Community.
Yes you can share more than one library at a time, just make sure that the homesharing ID and password you use for each one is the same on all of the libraries.

HT201401 I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the sam

I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the same
kindly reply and fix this for me
reply to my email,tq

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

I just broke my ipad. I've taken really good care of it and had it since the third gen came out (bought it right away) the screen is cracked from the bottom right corner and im wondering if i can replace it for free or even at all please help :(

I've taken really good care of it and had it since the third gen came out (bought it right away) the screen is cracked from the bottom right corner and im wondering if i can replace it for free or even at all please help

You can replace it, but not for free.
iPad mini: $219
iPad 2 or earlier, iPad mini Retina display: $249
iPad 3rd generation or later: $299

Since installing Photoshop CC I can't access Camera Raw from the program Bridge.

Since installing Photoshop CC I can't access Camera Raw from the program Bridge. When I try, I get a message that says, "Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature." Is Photoshop CC a qualifying product? It has been opened a number of times, but it doesn't solve this problem.

I am having this exact same problem and just upgraded to Windows 7...many people are saying to update the Plug In for Camera Raw to 4.6, but that is not working for me to see it in Bridge or Camera Raw.

Can I use a photo disc downloaded from the camera with a PC?

Can I use a photo disc downloaded from the camera using a PC on my MacBook Pro?

Yes provided the photo format is compatible with the Mac. I suspect it is JPG format which is compatible.

How can I move Whatsapp or google photos from the camera roll to a different folder

How can I move Whatsapp or google photos from the camera roll to a different folder

How can I move Whatsapp or google photos from the camera roll to a different folder
The only way to remove photos from the Camera roll is to delete them. You cannot move them directly from the Camera roll to another album.
Sync the photos to your computer, remove them from iPhone and resync the photos to your iphone.
See this -> iOS: Importing personal photos and videos from iOS devices to your computer

Can I restore MY RATINGS from the library.xml file alone?

That's the question - Can I restore MY RATINGS from the library.xml file alone?
Some facts to consider before replying:
1. I do not have the ITL file, so that solution is out.
2. My ipod was restored so NO ratings there either.
3. So far I have only seen programs to use BEFORE losing your itunes library. IF YOU KNOW a third party's program can help me AFTER THE FACT then tell me about it.
4. I HAVE searched these forums for previous threads. (a) searching engine needs big help and (b) among the 2 dozen finds, no solution for "only XML" found. If you got THAT threads url, post it!
So, using an old library.xml file, is there a way to get this info into itunes.
thanks
Gc
p4 3Ghz box Windows XP Pro only the ipod can lock it up
p4 3Ghz box Windows XP Pro if you can give me $10K in replacement software, I'll be glad to switch to MAC

there is mention of a hta
script, SaveRatings.hta , that saves and restores
the xml data.
The save button worked just fine. ..........
Turns out the restore button works just fine too when I dont toss in my homemade ratings.xml before clicking restore;-)
more explained at http://discussions.apple.com/thread.jspa?threadID=587586&tstart=0
anyway Otto's saveratings is a excellent tool to have on your drive. Unless you like re-rating 1400 or 1500 rated songs...........
Gc
p4 3Ghz box Windows XP Pro only the ipod can lock it up

Can I use SubPanels to display and run multiple executables from the same GUI?

I have two Labview executables that performs some A/D I/O, each using an independent USB-6008. I would like to run both of these executables from a single UI. Is this possible usin SubPanels? Or some other method?
I found KB regarding exe's and VI Server but can't seem to get the suggested workarounds implemented.
http://digital.ni.com/public.nsf/allkb/8545726A00272EB0862571DA005B896C?OpenDocument
I am using Labview2009
Thanks
Dan
Solved!
Go to Solution.

DBerry wrote:
No, of course I am not sure yet. I have only begun testing this method.
Not sharing common hardware (separate USM-6008s).
Here is the whole picture:
I have developed a top-level VI that performs Daqmx IO using a single USB-6008. The top-level VI references a Project Daqmx Task that points to the desired 6008. I would like to create a single UI that uses this top-level VI to control twoUSB-6008s simultaneously. I thought I could build the top-level VI into 2 separate exes, where the only difference between the exes is the hardware it points to (one exe to each of the 6008s). But I have been unsuccessful at running these two exes within a single UI. I attempted use subpanels on a tab control to do this but I am unable to obtain a reference to the top-level vis once they have been built into an exe. I have also tried building a dll and exporting the top-level vi from the dll build but i can't seem to get that to work either. In both of these cases my Open VI reference function returns errors (Error 1445). I am aware of the changes in referencing VIs from within an exe/dll since LV8.2 - http://digital.ni.com/public.nsf/allkb/8545726A00272EB0862571DA005B896C
The link seems to suggest that I should be able to obtain a reference to the top-level vi within the dll but I can't get it to work.
So I then moved on to the above method (making all the subvis reentrant). I just haven't figured this all out yet.
If you have suggestions on other problems I may run into please share. I think I can eliminate my FGs but haven't gotten back to this yet.
Thanks
Dan
When I am designing apps of the type you described I have kept the ned goal in mind from the begining since of the issue you are mentioning. I also don't want to tell you to throw it all away and start over. So with that in mind I have been looking at your posts and only offering the least destrutive ideas first. With that in mind I would like to invite yo uto look at the code i posted in this thread (reply #18 has a zip).
That code shows how to realize un-dockable GUI regions but it passes the ref of the top level VI to a reentrant VI it instanciate for each undockable region. It may have enough hints and technique to give you some ideas that will work for you.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again. You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589. This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process.

FAQ: Can I edit my photos in revel from the browser or android interface?

Q: Can I edit my photos in revel from the browser or android interface?
A: At this point (Feb 2013) you can not edit the photos in Revel unless you are using the Mac, iPhone, or iPad app version of Revel. We are continuing to add new features and intend to add new platforms and file types in the future.
If you have the app loaded on an iPad, iTouch, or Mac, see this link to learn how to edit:
FAQ: How do I edit photos in Revel?

There isn't an Aperture or iPhoto app for the iPad (it comes with a basic Photos apps which is effectively just a viewer), and the photo editing apps that do exist are fairly basic : cropping, brightness, rotation, straightening etc e.g. the free Photoshop Express app from Adobe (which also has an in-app purchase option). You can use the iPad for reviewing photos but if you tend to do extensive editing then it's probably not suitable.

How can I get rec'd text messages from the same subscriber not be appended

Hi,
Is there a way to configure the Apple iphone so that text messages from the same subscriber are displayed separately rather than appended to each other? In this way accidentally deleting one message wouldn't delete the entire history of messages from this subscriber.
When I launch the SMS service by pressing the green SMS button I am met by a screen that says Text Messages. On the left of this there is a button that says Edit and on the right there is one that is for writing a new message. Down the page are my messages all grouped by the originator of each messages. If I choose one I see that all messages from this source are present appended one after the other. There is also the option now to Clear on the top right hand corner. It is this Clear option I am worried about. If I choose Clear I am asked for a confirmation and then lo and behold as expected all my messages from this subscriber are deleted.
This is a work phone for support purposes and most of the texts will be from the telephone operator (i.e. the one same number) saying we have an email waiting to be read with a subject title giving a little description. I want to be in a position so that I don't accidentally delete the entire history of messages, say some evening when I'm tired or Monday morning if I 'm a bit asleep. Ideally I would prefer that each text message would stand alone in the Text Messages window irrespective of the originator and not be appended in a group fashion. Is there a way to do this?
Kind regards,
M

There is no way to do that on the iPhone. Messages will always be grouped into a 'conversation' based on the sender/recipient. Only Apple can change that behavior.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll?

My friend's iPod touch 5th gen is locked somehow for 41 years and she does not have a backup. Is there a way to unlock the iPod without restoring it or loosing the pictures and videos from the camera roll, the applications can be redownloaded and she had no music. Is there any known bug about ipods locking on their own because no one seemed to have tried to bypass the 4 digit code and it is locked for 26 million minutes.So thank you if anyone has any information or help for us.

Your friend may have placed the ipod next to an object that repeatedly pressed the screen. Under certain circumstances this can lead to what appears to the iTouch to be failed attempts to access the system. After repeated failed attempts, the Touch increases the waiting time required for the password and may ultimately lock in the way you describe.
It's been a while since this was posted, but this might be informative to someone else who finds themself in a similar predicament.

I updated to an iphone5 and only a few of my photos came in from the photostream how ever all of the are still on my iPad?! How do I get the rest of the photos over to my iphone5?!

I updated to an iphone5 and only a few of my photos came in from the photostream how ever all of the are still on my iPad?! How do I get the rest of the photos over to my iphone5?!

First of all, photo stream only saves up to 1000 photos and up to 30 days before they are deleted. The only thing you can do at this point is to sync the photos from the ipad to a computer and then sync to the iphone 5.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083
This should help... sync photos to a device...
http://support.apple.com/kb/HT4236

Can Aperture display the in-camera ratings from the Canon 5D MkIII?

Similar Messages

Maybe you are looking for