Can Aperture ratings be carried over to the MobileMe website?

i have recently started using Aperture, and i have just gone thro a large number of pics in Aperture and have rated the pics from 2 - 5 stars
i have just made a revised website of my rated selections but i cannot work out how to carry the ratings over to the website in order to allow others to see what pics i prefer
is it possible?

thanks for that answer, tho i understand that it is not definitive, that it might be possible to get Aperture and MobileMe to do this
i have posted a feature request on the link you gave and would like to keep the question open just in case someone else has an idea that the app might be able to achieve what i would like to have
i am posting shoots that i want the subject to see, and in the old websites that .mac allowed me to post, at least i was able to uncheck images after posting the entire shoot, so that i could remove the unwanted pics after conferring with the subject
but MobileMe does not allow me to do that anymore, and since Aperture and MobileMe are intertwined apps i feel that if i can rate an image in one, it ought to be able to see it in the other (and not just IF each image is downloaded and then opened and the metadata checked)

Similar Messages

  • Equipment number and serial number to be carried over to the new item

    Hi Friends,
    I have an issue regarding the " Equipment number and serial number carried over to the new item " .
    AS Per my Business Process i want to reject the old line item and add same Material in that  order, while adding the new line item or substituted item , the new item has to pick the old serial number and Equipment number.
    For the same We are using BAPI & BDC,
    IN BAPI We do not have any function module and in BDC while rejecting the old line item serial number, BDC is not recording the same and default it is Picking Delete serial number as "NO".
    Kindly through a light on this issue.
    Helpful answer will be rewarded.
    Advance thanks
    Regards
    Naren
    Message was edited by:
            Naren Naren

    Hi
    I think you can achieve my making the serial and equipment synchronization  in the materiel master. Adjacent to where we specify the serial no profile we can make the setting. I am not in front of the system , kindly check
    Also you need to have the internal number range for equipment which should be same as serial number
    Regards
    thyagarajan

  • HT3702 My itunes isn't allowing me to purchase the beyonce album. It just sends me over to the support website. What does that mean?

    My itunes isn't allowing me to purchase the beyonce album. It just sends me over to the support website. What does that mean?

    If you mean that you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTi

    How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTime but don't know how. Says to email website did that but takes me back to same place to email help

    Contact iTunes Customer Support, but honestly, there are no returns for iTunes purchases.

  • IPad Mini is stolen. Can I register this as stolen on the Apple website so that the scum who stole it can't use it

    iPad Mini is stolen. Can I register this as stolen on the Apple website so that the scum who stole it can't use it. Or atleast when they try and register it, I know about it?

    Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    http://support.apple.com/kb/HT4061
     Cheers, Tom

  • Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

    Pages '09 v4.1
    Problem 1:
         I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
         However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
         On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
         Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
    Problem 2:
         Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
    So there you have it. Christmas is over and its back to work. Thank-you for your attention.

    Regards re-positioning a table:
    I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before -  the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
    Page 1 left side.
    TEXT 1-line as 1-column
    TABLE (5-rows)
    TEXT (2-columns) 14-lines left column and 13-lines right column.
    [Layout Break] otherwise the above textual columns would be all on the left side of the page.
    TEXT 1-line as 1-column
    * The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
    Page 2 right side.
    A 2-page table flowing or breaking into a 3rd page.
    Page 3 left side.
    The overflow of the subject table.
    [Layout Break]
    [Section Break]
    Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

  • How can I open a new window with the same website like the one I have open?

    In safari I can open a new window with the same website like the one I have open, that makes it easy continuing to navigate on a website and to go back to the original website

    Hello Andieas
    Why open a new window for fast browsing??
    Open new tabs.
    Just right click on what you want to open and click "Open in new Tab"
    It is easy and doesn't consume memory from your computer as well as easy to navigate.
    Hope you'll like it

  • Can I access my photos/images through the Adobe website

    I just installed Photoshop Elements and the Organizer on my PC.  Can I access the images i created through the Adobe website?  My PC is at the shop and I need to retrive an image for work. 

    Did you sync the photo to your photoshop.com account? If so, you can go to photshop.com, log in, and get to the photo that way.

  • I am getting a dark or shaded screen on my safari pages.  I can conduct a search but cannot navigate the resulting website

    i am getting a shaded screen after a search on safari and cannot navigate the resulting websites.

    Dreamyqueeny wrote:
    My laptop fell off the coffee table, and slammed shut. I
    anybody have any ideas? else I am going to have to visit a genius! grrrrrrr....
    Thanks in advance!
    Vix
    Looks like that is what you are going to end up doing.  No telling what was damaged internally.

  • How to get a note to carry over to the next measure?

    I want to know how to "slide" into the one beat from the 15/16 beat of the previous measure. In other words, how can I get a note to cross over from one measure to the next?
    Thanks-

    Thanks for bearing with me.
    I created a region (up in the track timeline) which spans two measures. When I pencil in a note in the grid below (in Piano Roll) near the end of measure one, I cannot extend it or drag it into measure two (even though they both reside in the same region). Even stranger, whatever note I write into the grid in measure one gets "ghost" duplicated in measure two.

  • After downloading and updating my iPhone my apps are now backed up on my laptop and I can't move them back over to the phone. I tried to follow the instructions in Help section, but the screen where you are supposed to select the apps to share won't let m

    The screen where you should select the apps you want to share is greyed out. It won't et me drag them either. Any thoughts?
    Thanks!

    Hi skippy2012trev,
    Welcome to the Apple Support Communities!
    I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
    Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    Cheers,
    Joe

  • How to get the blending mode to carry over to the next comp.

    Hey all.
    I have a project going that involves several comps, and one of those comps involves setting the transfer mode of some layers to add, in order to get rid of the black background. The problem is, when i drop this comp into another comp, the black is back, and I need to set the transfer mode again, which messes with the colors of all the other objects in the previous comp.
    Is there a way to make sure that once a transfer mode is selected, that it stays that way even when the comp is dropped into another comp?
    Thanks

    and one of those comps involves setting the transfer mode of some layers to add, in order to get rid of the black background.
    Well, no offense, but that's a rubbish workflow. If you need genuine transparency, then create it properly. It's as simple as that. Use Shift Channels, the Channel Combiner or any other effects to "unmultiply" your layers or rewire channels. Doesn't even matter whether you do it on your source layers or the combined result of your additively blended layers - whichever works best to give the desired look.
    Mylenium

  • Is there a way I can have more than one tab of the same website open?

    It seems kind of silly that I'm not allowed to turn off the feature where it switches to the tab that is already open of that site, even if it is in a different window. Sometimes I need to have duplicates of a site open, like alarm clocks, or certain info sites.

    There's no reason why you shouldn't have multiple tabs of the same site open if you want to.
    Can you do the following first of all. Go to http://get.adobe.com/flashplayer/ and update Flash.
    If the problem persists in spite of the above, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • Can I still buy photoshop cs6 from the adobe website, or do I have to find it somewhere else, and what would be the best place to get it?

    Im looking to get adobe Photoshop cs6, but with Adobe pushing the Creative Cloud, can I even get the program from the website? If not, where would be the best place to buy it?

    As John says, they don't make it easy to find.  CS6 is now almost 3 versions back with no more updates being rolled out for it.
    As an alternative to purchase, you might want to consider the Photography Plan which includes PS CC and LightRoom for $9.99 per month.  At least, that way you'll be eligible for updates as soon as they become available.
    Creative Cloud Photography plan : Adobe Creative Cloud
    Nancy O.

  • Can two separate forms be added on the same website?

    I have imbeded a sign up form on my website, and I have created an additional form with paypal option, and am unable to imbed this second form.

    Sure - you can embed multiple FormsCentral forms on your website.
    Thanks,
    Josh

Maybe you are looking for