Can Apple please listen to the users, here's my IPhone 3G Wish List :(

Wish apple could incorporate these...
General - Copy & Paste
SMS - need forwarding feature
MMS - it's not even there
Video Recorder - it's not even there
Bluetooth - why can't it support fileshare?

here is the iPhone Feed back address
http://www.apple.com/feedback/iphone.html

Similar Messages

TS1717 I can not open any of the side bar links (ie. "my wish list", "purchase history"...)

all of a sudden the "my wish list" link in the side bar won't work. When I click it the progress bar at the top starts do "spin" but after 30 seconds it just stops spinning.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Please tell me the System Requirement for developing Iphone,Ipad,Ipod Apps ?

Hi All,
can anyone please tell me the system requirement for developing Iphone, Ipad, Ipod applications.
Thanks in advance :-)

Start with the iOS dev center > http://developer.apple.com/devcenter/ios/index.action

HT204406 Since updating to ios6 on my iPhone 4S iTunes Match has not worked. The app stays open for about five seconds before crashing. With ios5 it was great and worth paying for. Now it is utterly useless. Apple, please listen and fix this problem.

Ever since I updated to ios 6 on my iPhone 4S, iTunes Match has not worked.
I have been through the process of deleting my iTunes control files, and that worked temporarily, but now I cannot listen to music through the service.
It shows my artists and albums, then takes forever to access the songs (often more than 10 minutes - and yes, that's using WiFi), more often than not crashing before it gets to that point, then repeatedly crashing when I try to open the Music App, so I can't even access things I've downloaded.
Has anyone else found a solution?
Apple, please listen up - I am paying you for the iTunes Match service that is utterly useless. Fix it please.

After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

Can Apple please give the option to remove synching video?

Can Apple please add the toggle option for video for iCloud synching. It is eating up all of my space due to the fact that I did not purchase them from Apple.

You can tell Apple at the link below.
http://www.apple.com/feedback/iphone.html

Can smbody please tell me what to do to my iPhone 4s, when playing music or ringer, the sound will just stop without stop it.. I am really getting tired of this...

Can smbody please tell me what to do to my iPhone 4s, when playing music or ringer, the sound will just stop without stop it.. I am really getting tired of this...

After updating to iOS6, I lost all sound for apps like YouTube, Netflix, games, and even notifications. The only time sound worked was during a phone call or when the head set was plugged in.
I did a full back up and restore- sound restored but only for a day before the problem returned.
Called Apple Support and was advised to do another restore, but this time restore it as NEW first, then do the restore from back up.
Seemed to do the trick.
Here are the instructions of what I was given- hopefully this will help you too:
Here is a link about backing up your iPhone with iTunes.
http://support.apple.com/kb/HT1766?viewlocale=en_US
Once you back up your device you will want to restore it.
You will need to have iTunes open on your computer screen.
Please turn your iPhone off.
Press and hold the Home Button.
Continue to hold the Home Button as you plug you iPhone in to the usb cable.
You will want to continue to hold the Home button until you get a screen with the message "device found in recovery mode".
Please follow the prompts and restore device as NEW.
once the restore is done you will have to set up the device and test the sound.
If it works you will then need to restore the device from the back up to restore your user settings.
You can find the instructions how to restore from back up also from the the link I provided.

Can you please CLEAN up the podcasts that are no longer in service or being maintained? It's very tedious to click on someone's podcast to find that it hasn't been updated in 3 years.

Can you please CLEAN up the podcasts that are no longer in service or being maintained? It's very tedious to click on someone's podcast to find that it hasn't been updated in 3 years.

This is a user forum and it is best to post these inquiries to Apple Feedback:
http://www.apple.com/feedback/
You are right, a lot of older dead podcasts do not belong in the podcasts section. But there is still a lot of these podcasts that have good information and deserve to still be listed. For example there is quite a few photography lesson based podcasts in which you can get good information from different sources.

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

How did you do this move? Unless you know what you are doing you have to move the whole, complete iTunes folder.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

How i can send a mail to the user SAP Office mailbox through the spool.

hi all,
I have created an report and scheduled for background and it generated a spool now how i can send a mail to the user SAP Office mailbox through that spool.
                      please provide me the sample code if possible.
               thanks.

Read the spool number with this...
    SELECT RQIDENT
    INTO (T_TSP01-RQIDENT)
    FROM TSP01
    WHERE RQOWNER EQ SY-UNAME
      AND RQCLIENT EQ SY-MANDT.
    APPEND T_TSP01.
    ENDSELECT.
Use this FM RSPO_IRETURN_RAW_DATA to read the content of the spool into an Internal Table...
Finally use this FM SO_OBJECT_SEND to send the mail to an SAP Office user...
Greetings,
Blag.

"Please Wait For The User Profile Service" message when logging on to TS 2008

I have a Windows 2008 AD Domain with 2 Windows 2008 Terminal Servers. Both are configured identically. I have the TS Roaming profiles stored on a 3rd server and a GPO pointing all users to the roaming profiles. On one of the servers everything works perfectly. On the second server the users, after they input their credentials, get the following message "Please Wait For The User Profile Service". The message can stay there for up to 3 minutes, then they are logged innormall with the correct profile. This problem does not occur on log off. Any help would be appreciated

99% of the times I had this problem it was caused by either DNS issues or network bindings.
Are your servers multihomed? In other words: do you have multiple network cards? If so, make sure your "production" card is on top in the network connections -> advanced settings -> adapters and bindings.
You could also enable user env logging (search microsoft how to do that)

Can you please give me the details of Archiving object for Reservations

Hi All,
Could you please give me the details of Archiving object for Reservation documents. If there is no standard object can you please give me the details, for which program we are using.
Regards,
Ram

Hi,
You do not need to configure the tables to be deleted for any archive object through AOBJ. SAP would have maintained the list of tables from which data will be deleted if you archive a particular object. In case of archiving MM_EKKO, data will be deleted from many other tables apart from EKKO and EKPO. Here is the list of tables from which data will be delete if you archive PO using MM_EKKO.
A068
A081
A082
A215
ADR10
ADR11
ADR12
ADR13
ADR2
ADR3
ADR4
ADR5
ADR6
ADR7
ADR8
ADR9
ADRCOMC
ADRCT
ADRG
ADRGP
ADRT
ADRU
ADRV
ADRVP
AUSP
CDCLS
CDHDR
CDPOS_STR
CDPOS_UID
CMFK
CMFP
DJEST
EIKP
EIPO
EKAB
EKBE
EKBEH
EKBZ
EKBZH
EKEH
EKEK
EKES
EKET
EKETH
EKKN
EKKO
EKPA
EKPO
EKPV
EKUB
EREV
ESKL
ESKN
ESLH
ESLL
ESSR
ESUC
ESUH
IBADDR
IBIB
IBIBOBS
IBIBT
IBIN
IBINDOMAINS
IBINOBS
IBINOWN
IBINT
IBINTX
IBINVALUES
IBSP
IBST
IBSTREF
IBSYMBOL
INOB
JCDO
JCDS
JEST
JSTO
KAPOL
KOCLU
KONH
KONM
KONP
KONW
KSSK
MLBE
MLBECR
MLWERE
NAST
RESB
STXB
STXH
STXL
WRF_PSCD_DLHD
WRF_PSCD_DLIT
WRF_PSCD_DLIT_SH
Hope this helps
Cheers!
Samanjay

I can't start listener in the Control Painel/Admin Tools/ Services

Windows XP - Home Edition (I know it´s not the better but came with my laptop)
I installed the Oracle 10g and I don't know why I have 3 listener as services. Its services showed me different messages when I tried start it:
1. OracleOraDb10g_home1TNSListener: Could not start the 2. OracleOraDb10g_home1TNSListener service on Local Computer
2. OracleOraDb10g_home1TNSListenerORCL: The OracleOraDb10g_home1TNSListenerORCL service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
3. OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER: The OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
====PATH======
Path=C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\oracle 8i\bin;C:\oracle\
product\10.1.0\Db_3\jdk\jre\bin;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classi
c;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classic;C:\oracle\product\10.1.0\Db_
3\jlib;C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C
:\oracle\product\10.1.0\Db_3\jre\1.4.2\bin\client;C:\oracle\product\10.1.0\Db_3\
jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\ATI Technologies\ATI Control Panel;%java_home%\bin;C:\Program Files\Commo
n Files\Ulead Systems\MPEG;C:\WINDOWS\system32\gs\gs8.13\bin
====REGISTRY======
TNS_ADMIN I set as Binary Data in the HKEY_CURRENT_USER\Environment with the path C:\oracle\product\10.1.0\Db_3\NETWORK\ADMIN
====LISTENER.ORA======
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
====TNSNAMES.ORA========
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====SQL.ORA========
NAMES.DEFAULT_DOMAIN = 192.168.0.17
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
=======OS CONFIGURATION================
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 23-MAR-2006 08:23
:44
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.17)(PORT=1521)
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Ethernet adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . : myhome.westell.com
IP Address. . . . . . . . . . . . : 192.168.0.17
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
C:\>
Please, if somebody knows this problem I need a very urgent help. Thank you very much.

Thanks ALL, I GOT IT, but I used other solution.
Since I installed and uninstalled the Oracle several times, it keeps also many different Services for the listener. I don't know why, it didn't create a Service for my actual instalation with its path. In other words, all the services remained in the services.msc panel, had the path that was already removed from the Windows folder.
Then what I did, was that I picked one service, took its name (OracleOraDb10g_home1TNSListener), went to regedit to [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\OracleOraDb10g_home1TNSListener] and simply changed the image path that was setted for the one that was removed (C:\oracle\product\10.1.0\Db_2\BIN\TNSLSNR ) for mine that is installed right now
(C:\oracle\product\10.1.0\Db_1\BIN\TNSLSNR). Nothing more and finally works.
I have tried something in the services.msc panel before, as you can see in this forum at the thread "I can't start listener in the Control Painel/Admin Tools/ Services", but I never got
success.
Appreciate your time!!

Date modified of user profile can be considered as date the user last accessed the server?

Hi,
I have a terminal server with large number of old profiles.what is the Microsoft way to clear these?
Is the last modified date of user profile can be considered as date the user last logged in to this server?
Regards,
Arun
Best Regards, Arun http://whynotsql.blogspot.com/

Hi Arun,
For deleting old profiles please test the following group policy setting using gpedit.msc:
Computer Configuration\ Administrative Templates\ System\ User Profiles\
Delete user profiles older than a specified number of days on system restart Enabled
Delete user profiles older than (days) 30
It is applicable to Windows Server 2008 and later. You may need the following hotfix if you are running Server 2008 R2 (no SP1):
http://support.microsoft.com/kb/983544
Thanks.
-TP

Can you please advise on the following queries?

Hi Friends,
Can you please advise on the following queries?
FV60 is there anyway we can stop an FV60 transaction being input for a specified vendor or number of vendors?
Your response is highly appreciated.
Regards,
Baltha

Hello,
You can write an User-exit for validation in GGB0.
Assign the same in OB28.
Please check up with the ABAPer for the technical feasibility.
Regards,
Ravi

Can apple please create a universal keynote player?

I know keynote can export the presentations to many formats but none offers the quality and transitions like the orginal format. Can apple please please create a keynote player (like flash) that allows my clients to view the presentation without the ability to change it or have the program? Windows and Mac please.

I agree with this suggestion.
I recently took my Keynote presentation on a CD to a conference, along with backups including a .pdf and Powerpoint.
I have found that the powerpoint version will work on my own machine, but there are problems when you transfer to another machine: The problems exist when the .ppt attempts to locate audio and movie elements of the presentation. They are stored in an accompanying .ppt folder on the CD. But the .ppt thinks they are "back home" on your own computer.
I suspect this fault is either a fault of Export from Keynote, or the way I created the CDs I burned to take my presentations away with me. I have not solved this problem yet.
I also get a variety of unpredicatble results if I take a QT version of my presentation with me to a Windows machine. Sometimes QT is not avaiblable on the machine. Sometimes QT is there, but it does not want to play the H263 version of QT that Keynote has exported.
Maybe the solution is to export the DVD version of the presentation. I haven't explored that option.
(The good news - at my conference, another speaker happened to have a Mac laptop with Keynote on board.)

Can Apple please listen to the users, here's my IPhone 3G Wish List :(

Similar Messages

Maybe you are looking for