Can Apple tv remote signal pass through wood cabinet door?

Can Apple TV remote signal pass through wood cabinet door or must the box be clear of any obstruction?

To go through cabinetry you're $120 away from a solution.
Read the Comments.
http://www.amazon.com/Logitech-Harmony-Control-Smartphone-Simple/dp/B00BQ5RYI4/r ef=sr_1_1?ie=UTF8&qid=1423340992&sr=8-1&keywords=logitech+harmony+smart+control

Similar Messages

  • Can Apple TV simultaneously play music through my stereo (wired) and a bluetooth speaker in another room?

    I am looking at buying a bluetooth speaker that I could stream to from my Apple TV.  I also want to be able to play the same music through the stereo that my Apple TV is connected to. Can that be done simultaneously?
    Ay recommendations for a good quality bluetooth speaker?

    bluetooth only support bluetooth keyboards on the appletv
    Wireless
    Wi-Fi (802.11a/b/g/n)
    Bluetooth support for Apple Wireless Keyboard (requires Apple TV software version 5.2 or later)
    http://www.apple.com/appletv/specs/
    if you can find a device which take in optical audio from the Apple TV and make it bluetooth to the bluetooth speaker then suppose it would work
    but since it would need to be configured it would need controls or a webserver like a router has so very expensive

  • Web Policy Pass Through On Standalone AP

    On Cisco WLC SSID layer 3 configuration you can setup a web policy pass through to redirect a connected clients web browser to a certain starting page. Is this possible with a standalone Cisco AP not connected to a WLC?
    Thanks.

    No it's not possible. If you have a stand alone AP, you will need a 3rd party appliance or software to have the splash page option.
    Sent from Cisco Technical Support iPhone App

  • Disable Pass-through

    Hi
    I imported a big update.xml with pass-through authentication configuration ... Now I can't log in web admin console as configurator. How can I disable the great pass-through?
    Big Thanks
    JXXE

    Hey JXEE,
    This is in case still you haven't solved the passthrough, configurator login problem.
    I once faced a similar situation, where when one of our administrators configured passthrough login. What he did was, while creating the "passthrough login module group", he added the "resource Login Module" to the "passthrough login module group" but removed the "Default Lighthouse Login Module" from the group. After that the users can login to IDM using the resource login password but configurator could not login at all as the "Default Lighthouse Login Module" was removed from the Login Module Group.
    After trying so many options the only thing that worked for me was, preserving the IDM repository, which in this case MySQL, to preserve already created users, roles, resources etc. and then preserving WPMessages.properties, styles.css and images folder to preserve the customization and then reinstalling Sun IDM. By making the new IDM installation to point to the preserved repository and overwriting the new WPMessages.properties, Styles.css and images folder with the preserved WPMessages.properties, Styles.css and images folder I managed to restore the IDM properly.
    Looks like you too have similar problem. Hope this procedure would work for you. One reminder though, you may want to create the problem in a test environment and try this remedy before you try it on your production.
    Hope this would help.
    Thanks,
    SunCrazy

  • I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

    I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

    can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
    Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

  • I can't get a signal through whole house because of a brick wall   What range extender do you recommend to be used with my wireless router ( apple brand)

    I can't get a signal through whole house because of a brick wall   What range extender do you recommend to be used with my wireless router ( apple brand)

    Very few 3rd party wireless extenders will work with an Apple router, so your best bet is always to use an extender that is the same brand as the main router. An AirPort Express is a popular choice for this type of application with another Apple router.
    If you had a Cisco router, then a Cisco extender would be your best bet.  Same for Netgear, etc.
    But......a wireless extender can only "extend" the quality of wireless signal that it receives, and not much of a wireless signal is going to make it through a brick wall, so whether any extender might do what you want is open to question.
    You won't know whether an extender using wireless to connect will work to your satisfaction in your home until you actually try it out in your home.
    The performance will always be much better if you can connect the extending device back to the main router using a wired Ethernet cable connection.
    If it is not possible to run the Ethernet cable, a pair of Ethernet power line adapters might be able to send the signal over the existing AC power lines in your home. The theory with these devices is that you already have the wiring in place, you just need the adapters.
    In practice though, things do not always work as well as the theory might suggest, so if you decide to try a pair of adapters, it might be a good idea to understand the store's return policies before you buy.

  • Please can someone tell me how I can stop my apple TV remote working on my iMac when I am trying to watch a movie through the Apple TV

    Please help
    I have just bought an apple tv, my problem is that when ever i try and use the remote to do things with the TV it doues things on my iMac aswell. How do I un pair it from the iMac so it just workes with the Apple TV only

    There are several threads that address this issue.  Apparently there's an option to turn off infrared remotes in Security Preferences - but not for my MacBook Air.  Try this thread:
    Apple TV remote command macbook pro too!

  • Mountain lion and the problem it causes. How can I watch my Mac book pro mid 2010 on my TV passing through an amplifier for 5.1 sound?

    Hi guys,
    before Mountain Lion came out, I had my Mac Book Pro mid 2010, nicely connected to my DENON AVR-1912 amplifier through HDMI. The Amplifier would send the signal to the TV and manage the Audio as well.
    Since Mountain Lion came out, I could not anymore use my iWires HDMI cable to connect my MacBookPro to the amplifier, as my Mac would not recognize anymore my amplifier as a TV and therefore would not give me the display option that it used to give me with Lion. Result- I can not adjust the signal that goes through the HDMI cable and the signal is not recognised by the amplifier and then  transmitted onto the tv. NO SIGNAL
    So I went to the apple store and was told I could use the Apple tv 3rd Gen to do that. So I bought it, and went back home. After having installed and realised that it didn't worked as well,  I've called the Apple customer Service. They told me thta unfortunately, since I have a Mac Book Pro bought in mid 2010, I can not benefit from the mirroring function (Come on an i7 processor is absolutely good enough to do that). I asked if I could upgrade my Mac to a machine able to do that as I need this functionality. I was told I can't. I have to buy an other machine and sell mines through their recycle program....
    So I returned my apple TV 3rd Generation, and decided to buy a VeeBeam HD. This product says that I can easily stream from a Macbook Pro with an i7 and 4Gb of ram to my TV. However, when the Veebeam arrived today, I tried to install it... and it didn't work, why? Because Apple has changed some "protocols" and does not allow anymore third party companis to produce products that stream data from Apple products to a TV.
    So... my dear Apple, how am I meant to watch what I've got on my laptop (movies, music and stuff) on my TV going through my Amplifier now? It really seems I can not go by cable (the cable Apple sells- iWires), I can not use the Apple TV3rd Gen, and I can not use third party products.
    IS this normal to you?

    Hi guys,
    before Mountain Lion came out, I had my Mac Book Pro mid 2010, nicely connected to my DENON AVR-1912 amplifier through HDMI. The Amplifier would send the signal to the TV and manage the Audio as well.
    Since Mountain Lion came out, I could not anymore use my iWires HDMI cable to connect my MacBookPro to the amplifier, as my Mac would not recognize anymore my amplifier as a TV and therefore would not give me the display option that it used to give me with Lion. Result- I can not adjust the signal that goes through the HDMI cable and the signal is not recognised by the amplifier and then  transmitted onto the tv. NO SIGNAL
    So I went to the apple store and was told I could use the Apple tv 3rd Gen to do that. So I bought it, and went back home. After having installed and realised that it didn't worked as well,  I've called the Apple customer Service. They told me thta unfortunately, since I have a Mac Book Pro bought in mid 2010, I can not benefit from the mirroring function (Come on an i7 processor is absolutely good enough to do that). I asked if I could upgrade my Mac to a machine able to do that as I need this functionality. I was told I can't. I have to buy an other machine and sell mines through their recycle program....
    So I returned my apple TV 3rd Generation, and decided to buy a VeeBeam HD. This product says that I can easily stream from a Macbook Pro with an i7 and 4Gb of ram to my TV. However, when the Veebeam arrived today, I tried to install it... and it didn't work, why? Because Apple has changed some "protocols" and does not allow anymore third party companis to produce products that stream data from Apple products to a TV.
    So... my dear Apple, how am I meant to watch what I've got on my laptop (movies, music and stuff) on my TV going through my Amplifier now? It really seems I can not go by cable (the cable Apple sells- iWires), I can not use the Apple TV3rd Gen, and I can not use third party products.
    IS this normal to you?

  • Can't see photos of iPhoto through my Apple TV after moving the iPhoto library to my Airport Extreme Disk. It keeps "loading user's library" forever...

    Hi there,
    some days ago I purchased an Airport Extreme router with disk to move my iphoto library there and free space of my crowded macbook pro.
    Everything was working well (iphoto takes a little bit longer to start and quit) but now I can't see my photo library through my apple tv.
    It keeps loading the library forever.
    Is there any problem doing that?
    Thanks
    jm

    Help,
    Thanks for the quick answer and for the welcome.
    Yes I selected it in the iTunes sharing options (in fact several times, with resets in between just in case)
    I think that it's related to the size of the library (more than 8 gb) and e fact that is in a remote disk (in the AirPort Extreme)
    Hope anyone has the solution :-))
    Thanks again!
    Jm

  • How can I see how much data passes through my Time Capsule?

    I am thinking of using a cellular data plan at home. My current, rural internet provider is slow and unreliable. I use a MiFi as a backup and have 4G service which is much faster and rarely goes down. I need to see how much data is downloaded and uploaded to compare costs. All our data passes through my Time Capsule.

    A similar app to what Bob mentions is peakhour.. it works on any of the newer OS.
    https://itunes.apple.com/au/app/peakhour/id468946727?mt=12
    It is a good app. BUT.. fat ugly BUTT.. just the same as Bob has explained, it depends on SNMP to work.. and so due to apple removing a very useful and functional protocol from its airport range you can no longer use it. Bizarre.
    I strongly recommend a Netgear WNDR3800 (older model now but you can pick up one cheaply on ebay) and a 3rd party firmware called gargoyle. Apple delete my posts if I point you to it, so you will have to search yourself.
    Replace your tall TC with the Netgear as the main router.. bridge the TC to it and you can continue to use its wireless and for TM backups. The advantage is that gargoyle will not only measure everyones usage, by IP, it is able to set a quota on everyone using the net and you can set that quota for hourly, daily or weekly or monthly. It will track the usage and you can see at a glance what everyone has used.
    It is simple to load.. just like a standard firmware update. The interface is as clear as anyone can make it with such of lot of tools. And the actual router is powerful enough to provide excellent QoS and parental controls on top of measurements and quota.

  • How can I pass through error code 1009

    How can I pass through error code 1009

    See this support document. While I do not see an explanation for error code 1009, the closest ones describe 3rd party security software or a hardware fault. You decide which direction you want to head in. http://support.apple.com/kb/TS3694

  • Receive wireless signal and pass through via ethernet

    Hi,
    I'd like to know if it's possible to pass through internet via ethernet from a Time Capsule that receives a Wireless signal.
    How can I do this?
    Thanks!

    Well, to be more specific, this a scheme of what I'm trying to do (it represents the floors in my house):
    [URL=http://minus.com/liKoug8pFOaFN][IMG]http://i.minus.com/jiKoug8pFOaFN.jpg[/IMG][/URL]
    So;
    - Telenet modem wired to D-link wireless router.
    - D-link router to AE (wireless)
    - AE to stereo (wired)
    - D-link router to TC (wireless)
    - TC to PC (wired)
    - TC to printer (USB)
    - D-link to tv (wired)
    - D-link to Digibox (digital television - wired)
    I want to be able to stream music from every device on the netwerk (iPad, iPhone, MBP, ..)
    and print from every device. All music should be streamed from iTunes Library on TC.
    I hope this is clear
    Thanks in advance!

  • HT1947 Lost Apple TV remote, how can I use app if the home sharing is not already enabled?

    I lost my Apple TV remote so I can't change the settings on the tv.  Is there a way to use the remote app on my ipad without having the actual hardware remote to program the tv?

    The remote app requires home sharing to be enabled and both to be on the same network. Since that's not the case you will have to purchase a new remote.

  • HT4095 I downloaded a rented movie in hd to my ipad2 but can't find it to pay through my apple tv now. How do I watch the movie?

    I downloaded a rented movie in hd to my ipad2 but can't find it to pay through my apple tv now. How do I watch the movie?

    Rented movies downloaded to an iOS device cannot be transferred to any other computer or iOS device. Are you sure that a rented movie, downloaded to an iPad, can be airstreamed to an Apple TV?

  • TS2972 How can I stop iTunes on my computer to start whenever I use the Apple TV remote to select a new program?

    Whenever I use the Apple TV remote to choose a new program, iTunes starts on my computer and starts playing from the playlist. How do I prevent that from happening?

    Your computer is picking up the remote's signal. Go into system preferences - security - general. Click on the padlock and go into advanced. Check disable remote control infrared receiver.

Maybe you are looking for