Can Apple tv talk to airport express??

Hi,
Wondering if the ATV can talk to airport express. Might be nice to stream the movie audio to the AE. Any Ideas??

No. The answer is as simple as that. Not even if you play a video from your Mac and AirPlay it to the ATV. Normally air playing audio from a Mac allows for multiple speakers at the same time (i.e. Computer speakers, ATV, AE all at the same time), but this functionality goes away when you start playing a video. It only allows for one device to stream both audio and video at the same time.

Similar Messages

  • How can I stream audio from Apple TV 2 to Airport Express speakers.

    how can I stream audio from Apple TV 2 to Airport Express speakers.
    I have LCD projector on one wall and connected ATV to it via HDMI.
    Speakers on the other wall and connected to APXpress.

    To be honest the times we've wanted to have music from more than one set of speakers, I've usually used my mac's iTunes library and controlled it either from the mac or from my phone, since they're not really the times we have any TV on anyway. I've tested AirTunes from the Apple TV but can't recall whether it worked with content from a streaming library.
    Now I've got something to do.

  • I have an Apple TV and an Airport Express, can I use these to stream all audio from either my iPhone or my MacBook Pro, including Pandora?

    I have purchased an Apple TV and an Airport Express as a gift for a loved one and was under the impression that these two would not only allow for movies, videos etc would be streamed to the TV from my MacBook Pro, but also set up Airport Express with speakers and stream music from my laptop or iPhone.  Is there a way for all music, including Pandora, to be streamed through the Airport Express?  I can only figure out how it works with iTunes, not Pandora.
    Thanks for the help!!!

    You might want to take a look at Airfoil for Mac to be able to stream any audio source on your Mac.
    Rogue Amoeba | Airfoil for Mac: Wireless Audio Around Your House

  • If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?

    If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?
    Or just one device(room) at a time?
    It seems there is a lot of home theater systems where they all hook up to one "control" and then disperse to the different locations per instructions..
    Is this possible with all apple products?

    From iTunes using Multiple Speakers (you can control with the Remote app on iPhone/iPad too), but not from AppleTV itself.

  • How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

    I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
    Thanks

    No more meseges.
    في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
    New discussion activity
    Bob Timmons has posted in the AirPort community.
    How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
    Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
    A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
    You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
    We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
    To post a reply, go to the discussion in Apple Support Communities.                                                             
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • Can I add a second Airport Express?

    I have an Extreme Base Station connected to my Time Warner Cable Modem. It comes into my house in my office, which is over my garage, a separate structure in my backyard. The iMacs there are connected via Ethernet to the Apple Base Station. In my house, maybe 30 feet away, where I use two Macbook Pro's, iPhone 6, iPad 3 etc, all via Wireless, I have an Airport Express as an extender to amplify the signal because my house with it's lathe walls is a great shield. This works OK up to a point. The further away I get from the Airport Express, the fainter the signal gets.
    Naturally, the farthest room away is my family room with a Smart TV, Apple TV, A/V receiver, DirecTV Cinema box, Playstation3 etc. I just added an Amazon FireStick TV via HDMI. It found my wireless network perfectly and joined. Problem is, it's buffering like crazy when I try to watch a movie and reporting "bandwidth too low". So I have a problem. I need to boost the signal one more time.
    Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
    If not, does anyone have any ideas?
    Thank you.

    Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
    Sorry, but no. Even if it was possible, the speed loss would be amazing, and would really hurt, not help the current network performance.
    Probably not the answer that you want to hear, but the only way to get the same signal strength and speed from your office to a location in the home is to run an Ethernet cable between the two locations.
    There is no loss of signal or speed through an Ethernet cable up to 330 feet, or 100 meters. Good old Ethernet cable. Nothing comes close to a wire in terms of performance.
    I faced a similar problem, and while the initial outlay to the electrician was significant, it has been the best investment that I ever made in terms of improving network performance....far better than the "improvement" with any new product, or any new router or any new technology that might have been available.
    If you absolutely cannot run the Ethernet cable, then a pair of Ethernet Over Powerline (EOP) adapters might be able to send the Ethernet signal over the existing power lines in your office and home.
    The theory with EOP products is that you already have the wiring in place.....you just need the adapters. Unfortunately, things do not always work as well in practice as the theory might suggest.......having the signal hop several different circuits would be one major challenge.....whether the office and home are on the same master circuit would be a question as well.
    Given your situation, I would not even consider trying EOP adapters unless the store agreed to take them back within 7-14 days if they don't work well for you.

  • Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay

    Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

    My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
    On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

  • Can I use a second Airport Express on the 1st floor to boost the signal from the 2nd floor Airport Express?

    We have a wiFi network with on Airport Express on the upper floor. Watching NetFlix via AppleTV on the television downstairs is annoying since it stops to buffer the video every few minutes (NetFlix works smoothly upstairs, closer to the Airport Express). Can I use a 2nd Airport Express downstairs to boost the signal? If so, how do I configure it?

    Yes, you can use a second 802.11n AirPort Express Base Station (AXn) to extend the range of the first one.
    Here are the basic steps to do so:
    Dynamic WDS - Extending a Wireless Network Setup
    If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    Open AirPort Utility, and then, select the base station that will connect to the Internet.
    Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then, click Wireless.
    Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
    Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
    Enter the base station network and base station password if necessary.
    Click Update to update the base station with new network settings.
    (ref: Pages 43-44 of Apple AirPort Networks.)

  • Can I use an old Airport Express to extend the range of a new Airport Express?

    Hi all.  I have an old Airport Express 802.11g (First Gen?) that is starting to fade.  Still works, but not what it used to be.  So I am going to buy a new Airport Express.  I'm not interested in the Airport Extreme.
    Question:  If I use the new Airport Express as my main wireless router, can I plug my old Airport Express into another room as an extender?  In other words, with the old Express and the new Express talk to each other or will a new Express only allow extension with another new Express?
    Thanks!

    Sorry, but the old AirPort Express 802.11 b/g does not have a setting to "Extend a wireless network", so it cannot be used as a extender with the newer AirPort Express if you plan to connect wirelessly.
    If you plan to connect the older Express using a permanent wired Ethernet cable connection, then it could be configured to provide additional wireless signal coverage in that manner.

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • Can I plug in the airPort Express 802.11n Wifi 220 volt power?

    can I plug in the airPort Express 802.11n Wifi 220 volt power?

    Yes. Its power supply is universal:
    100-240V AC, 50-60Hz; input current: 0.2 amp
    http://www.apple.com/airportexpress/specs/

  • How can i change my old airport express password with mavericks

    I just bought a new TV and I am trying to connect to my wi-fi, which runs via an old Airport Express. The TV manufacturer says that I should try changing my password from a WEP to WPA - but it seems that I can't even access my Airport Express because it's not supported by Mavericks. Is there a work-around, or do I need to upgrade my Airport Express? It's running fine otherwise - supports multiple laptops and iPhone.

    Hi green jean
    Try this > http://www.apple.com/airportextreme/features/printing.html
    but also see > http://docs.info.apple.com/article.html?artnum=305293
    Dennis

  • Can I use a 2nd Airport Express to extend signal?

    I have the AirPort Express 2nd gen.  I play music via my iPhone & iPad when I am "in range" with the AirPort Express thru my home music system.
    If I go outside, my iPhone drops the signal and music stops.  My iPad on the other hand has a stronger signal and the music plays on in the same location.
    Can I purchase a 2nd AirPort Express and use it as a wifi extender or range extender to increase the distance of my wifi signal?
    Or, can I use any wifi router to accomplish this?
    I'd like to stay all Apple, if possible, as mixing Apples and Oranges is not good.
    If so, can someone please tell me how to set this up?
    Thank you all for your valuable assistance.
    SmokinTulip

    The AirPort Express 2008 "extender" is about 80 feet away from the AirPort Express 2012 (new) model.  Is this too far to get a good signal?
    Wireless performance is affected by "interference".  If you have a clear, line-of-sight path between the AirPort devices, then 80 feet may not be too great of a distance.
    But, if there are walls or ceilings or other obstructions in the signal path that "interfere" with the wireless signal, the distance that the signal can travel and maintain decent signal strength and speed is dramatically affected.
    On average, a typical wall (sheetrock and 2 by 4s) in a home will absorb anywhere from 10-20% of the signal.  As you might imagine, a ceiling will absorb even more of the signal since it is thicker and more dense than a wall.
    Heavy furniture, large mirrors (a mirror has a metal backing) will really slow down and absorb the wireless signal as well.
    If the wireless signal must pass through multiple walls, or a ceiling and a few walls, not much of the signal will get through.....even if the distance might be only 20-30 feet between the AirPort devices.

  • How can I use my old AirPort Express?

    How can I use my old AirPort Express (the one that plugs right into the wall without a power cable) to stream music to a stereo when I am using the new Airport Express?  The AirPort Utility 6.1 will not recognize the old AirPort Express.

    Apple does not make it easy for you to use an older device when they want you to buy newer devices.
    See this link for tips on how to install a version of AirPort Utility on Mountain Lion that will allow you to configure your older Express:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
    This is not supported by Apple, so it is your decision on whether you want to move forward with this. It works fine for me, but I cannot guarantee that it will work for you, nor offer support if you have difficulty.

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for