Can Appleworks be installed on OSX 10.7.5?

Can Appleworks be installed on my OSX 10.7.5, Macbook Pro?

Hope info from this article  helps.
https://discussions.apple.com/docs/DOC-2522

Similar Messages

  • Can't re-instal Tiger (OSX 10.4). backe

    I was running OSX 10.4 on my Macbook Pro. I severely damaged my system by (I assume) attempting to restore from a faulty backup. Having tried to recover by less drastic means, I finally decided to erase the disk and restore OSX 10.4 from the install DVD. I tried to boot from the install DVD, but failed. I loaded the install DVD into the drawer and tried booting with the 'c' key pressed (it hung with the clock icon turning), and tried booting with the 'alt' key pressed, but the DVD was not offered as a boot option. I then booted from a 10.4 system on an external firewire attached drive (under which I am currently operating). The install DVD then showed up in Finder, and I clicked on the 'Instal Mac OS X' icon. This produced a message saying "OS X 10.4 cannot be installed on this machine. Please consult the documentation for a list of supported Macintosh computers".
    I assume I must somehow have modified some bit of ROM. How do I recover?
    Nigel Martin

    Thanks, your question made me realise my mistake. I have 3 machines running OS X 10.4, and thought I needed only to keep the one copy of OSX 10.4 install. But prompted by your question, I tried out the install disk on another machine, a happily working intel iMac, and got the same message. So I looked at the "Read Before You Install" file, and find that it is for PowerMacs only. Annoying.
    I hope I can find the install disk that came with my MacBook Pro, but I see from http://discussions.apple.com/thread.jspa?messageID=10194423&#10194423 that I can get a replacement (at a price).
    Thanks for the penetrating question.
    Nigel Martin

  • Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

    Hi
    I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
    Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
    So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
    Hmmm
    Checking iPhoto ...
    About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
    So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
    Unfortunately this is only an update.
    So I need to install first a newer Iphoto version.
    Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
    Lost!
    How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
    Any help welcome
    Thx
    Wolfgang

    I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them.  Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
    The error:
    Installer quit unexpectedly.
    Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
    Backtrace not available
    Unknown thread crashed with X86 Thread State (32-bit):
      eax: 0x00000055  ebx: 0x00000000  ecx: 0x00000000  edx: 0x00000000
      edi: 0x00000000  esi: 0x00000000  ebp: 0x00000000  esp: 0x00000000
       ss: 0x0000001f  efl: 0x00010203  eip: 0x8fe01030   cs: 0x00000017
       ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000000
      cr2: 0xfffffffc
    Binary images description not available...
    This laptop cannot be upgraded further without hindering its performance.  Hence, I need to keep the version of iPhoto that I currently have.
    Thank you for your response.

  • Can i install mac osx back again after installing windows 7 on my mac book a1181?

    i have apple mac book a1181 white, but i had problem logging on as it was secured by a password, and i allready lost my recovery dvd, so i installed windows 7 on my mac book a1181 by deleting its partition from GTP to NTFS but i experienced problems after installing windows 7 as sound was not comming as i could not find sound drivers for macintosh, so now i plan again to restore my apple macbook a1181 back by reinstalling mac osx 10.5.8, how can i again install mac osx on my notebook and is it possible to re-install mac on my notebook? please give me some help.

    Insert your OS X install disc and restart holding the C key, hold it down until you see the Apple logo and spinning gear. Choose your language and at the next screen from the top menu bar select Utilities-Disk Utility. Select your internal hard drive, click on the Partition tab and select 1 partition. Click on the Options button and select GUID partition scheme. Click OK. Choose to format the drive as Mac OS Extended Journaled. When Disk Utility is done and your drive is properly partitioned and formatted quit DU and go back to the installer screen and reinstall OS X. When you're up and running run software update a couple times to get everything up to date as far as you can with 10.5.8. Then consider upgrading to OS X 10.6.8 Snow Leopard for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

  • How can i re install the OS if the software gets corrupted in OSX 10.8 ?

    how can i re install the OS if the software gets corrupted in OSX 10.8 ?

    If the hard disk is damaged:
    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Uitlity, select Macintosh HD in the sidebar and repair the disk. If it can't be repaired, take your Mac to an Apple Store

  • HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

    I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

    Run Software Update to get to 10.6.8 and update Java.

  • My daughter has a 2002 intel running Tiger and I want to update it to Snow Leopard. I get an error message that OSX can't be installed on this system. Please help!!! Thanks

    Hi,
    I'm having a really hard time here.
    I want to update my daughters intel from Tiger to Snow Leopard for her to make her life (and mine) easier.
    When I try install the OS, I keep getting an error message that OSX can't be installed on this Mac.
    What's going on?
    Never had so much trouble before.
    Please help.
    Thanks so much

    You're welcome. Please note that it is a little more difficult to obtain Snow Leopard these days. Please see the post by Kappy at the link below.
    https://discussions.apple.com/thread/4164689?start=0&tstart=0

  • I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    Which iBook do you have?
    http://support.apple.com/kb/HT1772?viewlocale=en_US
    Which version of the OS is installed, and which version are you trying to install?
    You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

  • How can I return to use OSX (Yosemite) after installing Windows 8.1?

    How can I return to use OSX (Yosemite) after installing Windows 8.1?
    I cannot find Boot Camp on my iMac (late 2013) with windows installed. So I downloaded it, but I cannot run it because of an error (x64...). I tried to use my USB stick with bootcamp installed but nothing. When I turn my iMac on it starts automatically with windows. I tried to search it, but I found only the setup and it doesn't work. How can I get back to my APPLE iMac? How can I use OSX?
    Excuse me for the (maybe) uncorrect language, I speak Italian.

    Hello!
    You can start your Mac up with the [alt] (sometimes [option]) key pressed and you will get the Startup Manager.

  • Trying to install printer - get the message "You can't open the application "OSX installer" because PowerPC applications are no longer supported."

    I am trying to install print controller and printer -but get this error message when trying to use the installer:
    You can’t open the application “OSX installer” because PowerPC applications are no longer supported.
    I also have a macbook pro running the same version OS and it installed fine there - I can't find the difference; but, NEED to print from my IMac.
    Any help and/or suggestions would be greatly appreciated
    Thanks!

    I'm guessing you've tried Fiery's website for updated drivers? I wonder whether Lion drivers would work? Anything of use here:
    http://fieryforums.efi.com/showthread.php/2824-OS-10.7-compatible-drivers-availa ble?s=c8afc71d2746a67970bb42d50538898c

  • Can AppleWorks from my '05 G5 be installed in my new iMac?

    When I purchased my g5 in 2005, appleworks came standard. yesterday, I purchased a new iMac and now appleworks (along with spreadsheet and something else i'll never use) cost $70 or $80, so I was hoping that I may be able to install the appleworks from my 05 G5. is this possible?
    thanks in advance,
    Jeremiah

    scott01 wrote:
    In the original Appleworks 6 install log on the G5, the installer created a number of folders in the System folder as well as the Appleworks 6 folder in /Applications. Those folders contain Help files, fonts, MacLink Plus translators, etc. When you say "Any AppleWorks associated files that are required by the application will be created as they are needed, and should NOT be transferred," are these the files you refer to?
    The key phrase there is "required by the application".
    In the "System Folder"
    I do see an AppleWorks folder in my Application Support folder.
    It contains many of the items you mention.
    and a Claris folder containing the older XTND translators and some other files,
    And an AppleWorks folder in the Preferences folder.
    This is the Mac OS 9 System Folder, and the enclosed files are not required by AppleWorks running in OS X. (And running in OS 9 requires Classic, which is not supported on intel based Macs.)
    It MAY be useful to move fonts and the translators to the new machine, and I doubt that doing so will do harm, but I can't make a recommendation either way.
    In the "System" folder, which belongs to OS X, I don't see any of these items.
    Alternatively, should I just use the original Appleworks CD and the 6.2.9 updater (thanks for the link!) to do a clean install of Appleworks on the 10.6 iMac? I know it will need Rosetta to run. I figure I could then move my custom Appleworks templates into the new Starting Points folder.
    Installation from your original AW (retail box) CD will either work or return a "not supported on this architecture" or similar message. The message, if returned refers to the installer on the disk, not to AppleWorks 6.2.x.
    Regards,
    Barry

  • My osx version is 10.8.2. i was buying the facetime app for my mac. i got this error -"FaceTime can't be installed on "Macintosh HD" because the version of OS X is too new." so please help me out of this funny situation.

    my osx version is 10.8.2. i was buying the facetime app for my mac. i got this error -"FaceTime can’t be installed on “Macintosh HD” because the version of OS X is too new." so please help me out of this funny situation.

    https://www.apple.com/support/mac-apps/facetime/

  • I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Mach

    I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

    http://support.apple.com/kb/TS2986

  • Quicktime Player states "You can't open the application QuickTime because the Classic environment is no longer supported."  I just installed Mac OSX Snow Leopard.  What do I need to do?

    I just installed Mac OSX (10.6.8) and can not get Quick time player to work.  When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX.  What do I need to do to use Quick Time Player with 10.6.8

    Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
    http://support.apple.com/kb/dl923
    Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link  even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
    (Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

Maybe you are looking for

  • In Internet Explorer I was able to right click and load the page as a PDF file. Can I do this with Firefox?

    I have searched everywhere for this. When I go to "Tools" then "Options" then "Applications" I see that Adobe Acrobat is enabled however I do not see anything on Firefox that allows me to use it to convert a web page over to a PDF.

  • What format do the Quicktime files need to be in?

    okay so i just got a mac. haven't had time to play with it much. but quick easy (prolly dumb) question. what format does the quicktime file need to be in (both audio and video)? and how do i get my movies into that format? *i do have handbrake as wel

  • Third Party SIP Phone Alerting name

    Hello, We are having cisco ip phones & third party sip phones in our company. both are registered to same cucm 9.X. Now when cisco phones calls sip Phones. we are able to see the alerting name on cisco phone. Say, Cisco Phone "Phone-A" calls Third Pa

  • SPNego - Fallback - Basic Authentication

    Hi All, If I implement SPNego as per the configuration wizard and select the basic password authentication as the fallback option, what type of username/password can be used on the logon page: - An Active Directory username/password - A Portal UME us

  • BEA-149004

    Hi , I am trying to deploy my application in integrated weblogic server of jdeveloper 11g.it is showing following error can any one help me out. Actually it was working previously fine,today only i am facing this type of error. <Sep 9, 2011 12:17:20